示例#1
0
文件: environs.go 项目: klyachin/juju
// prepare is the internal version of Prepare - it prepares the
// environment but does not open it.
func (p *environProvider) prepare(cfg *config.Config) (*config.Config, error) {
	ecfg, err := p.newConfig(cfg)
	if err != nil {
		return nil, err
	}
	p.mu.Lock()
	defer p.mu.Unlock()
	name := cfg.Name()
	if ecfg.stateId() != noStateId {
		return cfg, nil
	}
	if ecfg.stateServer() && len(p.state) != 0 {
		for _, old := range p.state {
			panic(fmt.Errorf("cannot share a state between two dummy environs; old %q; new %q", old.name, name))
		}
	}
	// The environment has not been prepared,
	// so create it and set its state identifier accordingly.
	state := newState(name, p.ops, p.statePolicy)
	p.maxStateId++
	state.id = p.maxStateId
	p.state[state.id] = state

	attrs := map[string]interface{}{"state-id": fmt.Sprint(state.id)}
	if ecfg.stateServer() {
		attrs["api-port"] = state.listenAPI()
	}
	return cfg.Apply(attrs)
}
示例#2
0
文件: open.go 项目: pmatulis/juju
// decorateAndWriteInfo decorates the info struct with information
// from the given cfg, and the writes that out to the filesystem.
func decorateAndWriteInfo(info configstore.EnvironInfo, cfg *config.Config) error {

	// Sanity check our config.
	var endpoint configstore.APIEndpoint
	if cert, ok := cfg.CACert(); !ok {
		return errors.Errorf("CACert is not set")
	} else if uuid, ok := cfg.UUID(); !ok {
		return errors.Errorf("UUID is not set")
	} else if adminSecret := cfg.AdminSecret(); adminSecret == "" {
		return errors.Errorf("admin-secret is not set")
	} else {
		endpoint = configstore.APIEndpoint{
			CACert:    cert,
			ModelUUID: uuid,
		}
	}

	creds := configstore.APICredentials{
		User:     configstore.DefaultAdminUsername,
		Password: cfg.AdminSecret(),
	}
	endpoint.ServerUUID = endpoint.ModelUUID
	info.SetAPICredentials(creds)
	info.SetAPIEndpoint(endpoint)
	info.SetBootstrapConfig(cfg.AllAttrs())

	if err := info.Write(); err != nil {
		return errors.Annotatef(err, "cannot create model info %q", cfg.Name())
	}

	return nil
}
示例#3
0
文件: open.go 项目: zhouqt/juju
// decorateAndWriteInfo decorates the info struct with information
// from the given cfg, and the writes that out to the filesystem.
func decorateAndWriteInfo(info configstore.EnvironInfo, cfg *config.Config) error {

	// Sanity check our config.
	var endpoint configstore.APIEndpoint
	if cert, ok := cfg.CACert(); !ok {
		return errors.Errorf("CACert is not set")
	} else if uuid, ok := cfg.UUID(); !ok {
		return errors.Errorf("UUID is not set")
	} else if adminSecret := cfg.AdminSecret(); adminSecret == "" {
		return errors.Errorf("admin-secret is not set")
	} else {
		endpoint = configstore.APIEndpoint{
			CACert:      cert,
			EnvironUUID: uuid,
		}
	}

	creds := configstore.APICredentials{
		User:     "******", // TODO(waigani) admin@local once we have that set
		Password: cfg.AdminSecret(),
	}
	info.SetAPICredentials(creds)
	info.SetAPIEndpoint(endpoint)
	info.SetBootstrapConfig(cfg.AllAttrs())

	if err := info.Write(); err != nil {
		return errors.Annotatef(err, "cannot create environment info %q", cfg.Name())
	}

	return nil
}
示例#4
0
// SecretAttrs filters the supplied configuration returning only values
// which are considered sensitive. All of the values of these secret
// attributes need to be strings.
func (environProvider) SecretAttrs(cfg *config.Config) (map[string]string, error) {
	logger.Infof("filtering secret attributes for environment %q", cfg.Name())

	// If you keep configSecretFields up to date, this method should Just Work.
	ecfg, err := validateConfig(cfg, nil)
	if err != nil {
		return nil, err
	}
	secretAttrs := map[string]string{}
	for _, field := range configSecretFields {
		if value, ok := ecfg.attrs[field]; ok {
			if stringValue, ok := value.(string); ok {
				secretAttrs[field] = stringValue
			} else {
				// All your secret attributes must be strings at the moment. Sorry.
				// It's an expedient and hopefully temporary measure that helps us
				// plug a security hole in the API.
				return nil, errors.Errorf(
					"secret %q field must have a string value; got %v",
					field, value,
				)
			}
		}
	}

	return secretAttrs, nil
}
示例#5
0
// NewModel creates a new model with its own UUID and
// prepares it for use. Model and State instances for the new
// model are returned.
//
// The controller model's UUID is attached to the new
// model's document. Having the server UUIDs stored with each
// model document means that we have a way to represent external
// models, perhaps for future use around cross model
// relations.
func (st *State) NewModel(cfg *config.Config, owner names.UserTag) (_ *Model, _ *State, err error) {
	if owner.IsLocal() {
		if _, err := st.User(owner); err != nil {
			return nil, nil, errors.Annotate(err, "cannot create model")
		}
	}

	ssEnv, err := st.ControllerModel()
	if err != nil {
		return nil, nil, errors.Annotate(err, "could not load controller model")
	}

	uuid := cfg.UUID()
	newState, err := st.ForModel(names.NewModelTag(uuid))
	if err != nil {
		return nil, nil, errors.Annotate(err, "could not create state for new model")
	}
	defer func() {
		if err != nil {
			newState.Close()
		}
	}()

	ops, err := newState.envSetupOps(cfg, uuid, ssEnv.UUID(), owner)
	if err != nil {
		return nil, nil, errors.Annotate(err, "failed to create new model")
	}
	err = newState.runTransaction(ops)
	if err == txn.ErrAborted {

		// We have a  unique key restriction on the "owner" and "name" fields,
		// which will cause the insert to fail if there is another record with
		// the same "owner" and "name" in the collection. If the txn is
		// aborted, check if it is due to the unique key restriction.
		models, closer := st.getCollection(modelsC)
		defer closer()
		envCount, countErr := models.Find(bson.D{
			{"owner", owner.Canonical()},
			{"name", cfg.Name()}},
		).Count()
		if countErr != nil {
			err = errors.Trace(countErr)
		} else if envCount > 0 {
			err = errors.AlreadyExistsf("model %q for %s", cfg.Name(), owner.Canonical())
		} else {
			err = errors.New("model already exists")
		}
	}
	if err != nil {
		return nil, nil, errors.Trace(err)
	}

	newEnv, err := newState.Model()
	if err != nil {
		return nil, nil, errors.Trace(err)
	}

	return newEnv, newState, nil
}
示例#6
0
func (maasEnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Debugf("opening environment %q.", cfg.Name())
	env, err := NewEnviron(cfg)
	if err != nil {
		return nil, err
	}
	return env, nil
}
示例#7
0
// Open is specified in the EnvironProvider interface.
func (prov *azureEnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Debugf("opening model %q", cfg.Name())
	environ, err := newEnviron(prov, cfg)
	if err != nil {
		return nil, errors.Annotate(err, "opening model")
	}
	return environ, nil
}
示例#8
0
文件: ebs.go 项目: Pankov404/juju
// VolumeSource is defined on the Provider interface.
func (e *ebsProvider) VolumeSource(environConfig *config.Config, cfg *storage.Config) (storage.VolumeSource, error) {
	ec2, _, _, err := awsClients(environConfig)
	if err != nil {
		return nil, errors.Annotate(err, "creating AWS clients")
	}
	source := &ebsVolumeSource{ec2: ec2, envName: environConfig.Name()}
	return source, nil
}
示例#9
0
文件: open.go 项目: kapilt/juju
// Initialize sets up an initial empty state and returns it.
// This needs to be performed only once for a given environment.
// It returns unauthorizedError if access is unauthorized.
func Initialize(info *mongo.MongoInfo, cfg *config.Config, opts mongo.DialOpts, policy Policy) (rst *State, err error) {
	st, err := open(info, opts, policy)
	if err != nil {
		return nil, err
	}
	defer func() {
		if err != nil {
			st.Close()
		}
	}()
	// A valid environment is used as a signal that the
	// state has already been initalized. If this is the case
	// do nothing.
	if _, err := st.Environment(); err == nil {
		return st, nil
	} else if !errors.IsNotFound(err) {
		return nil, err
	}
	logger.Infof("initializing environment")
	if err := checkEnvironConfig(cfg); err != nil {
		return nil, err
	}
	uuid, ok := cfg.UUID()
	if !ok {
		return nil, errors.Errorf("environment uuid was not supplied")
	}
	st.environTag = names.NewEnvironTag(uuid)
	ops := []txn.Op{
		createConstraintsOp(st, environGlobalKey, constraints.Value{}),
		createSettingsOp(st, environGlobalKey, cfg.AllAttrs()),
		createEnvironmentOp(st, cfg.Name(), uuid),
		{
			C:      stateServersC,
			Id:     environGlobalKey,
			Assert: txn.DocMissing,
			Insert: &stateServersDoc{
				EnvUUID: uuid,
			},
		}, {
			C:      stateServersC,
			Id:     apiHostPortsKey,
			Assert: txn.DocMissing,
			Insert: &apiHostPortsDoc{},
		}, {
			C:      stateServersC,
			Id:     stateServingInfoKey,
			Assert: txn.DocMissing,
			Insert: &params.StateServingInfo{},
		},
	}
	if err := st.runTransaction(ops); err == txn.ErrAborted {
		// The config was created in the meantime.
		return st, nil
	} else if err != nil {
		return nil, err
	}
	return st, nil
}
示例#10
0
// Open opens the environment and returns it.
// The configuration must have come from a previously
// prepared environment.
func (environProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Infof("opening model %q", cfg.Name())

	env := &environ{name: cfg.Name()}
	if err := env.SetConfig(cfg); err != nil {
		return nil, err
	}

	return env, nil
}
示例#11
0
文件: environ.go 项目: pmatulis/juju
// resourceGroupName returns the name of the environment's resource group.
func resourceGroupName(cfg *config.Config) string {
	uuid, _ := cfg.UUID()
	// UUID is always available for azure environments, since the (new)
	// provider was introduced after environment UUIDs.
	modelTag := names.NewModelTag(uuid)
	return fmt.Sprintf(
		"juju-%s-%s", cfg.Name(),
		resourceName(modelTag),
	)
}
示例#12
0
func (p environProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Infof("opening environment %q", cfg.Name())
	e := new(environ)
	e.name = cfg.Name()
	err := e.SetConfig(cfg)
	if err != nil {
		return nil, err
	}
	return e, nil
}
示例#13
0
// Validate implements environs.EnvironProvider.Validate.
func (provider environProvider) Validate(cfg, old *config.Config) (valid *config.Config, err error) {
	// Check for valid changes for the base config values.
	if err := config.Validate(cfg, old); err != nil {
		return nil, err
	}
	validated, err := cfg.ValidateUnknownAttrs(configFields, configDefaults)
	if err != nil {
		return nil, fmt.Errorf("failed to validate unknown attrs: %v", err)
	}
	localConfig := newEnvironConfig(cfg, validated)
	// Before potentially creating directories, make sure that the
	// root directory has not changed.
	containerType := localConfig.container()
	if old != nil {
		oldLocalConfig, err := provider.newConfig(old)
		if err != nil {
			return nil, fmt.Errorf("old config is not a valid local config: %v", old)
		}
		if containerType != oldLocalConfig.container() {
			return nil, fmt.Errorf("cannot change container from %q to %q",
				oldLocalConfig.container(), containerType)
		}
		if localConfig.rootDir() != oldLocalConfig.rootDir() {
			return nil, fmt.Errorf("cannot change root-dir from %q to %q",
				oldLocalConfig.rootDir(),
				localConfig.rootDir())
		}
		if localConfig.networkBridge() != oldLocalConfig.networkBridge() {
			return nil, fmt.Errorf("cannot change network-bridge from %q to %q",
				oldLocalConfig.rootDir(),
				localConfig.rootDir())
		}
		if localConfig.storagePort() != oldLocalConfig.storagePort() {
			return nil, fmt.Errorf("cannot change storage-port from %v to %v",
				oldLocalConfig.storagePort(),
				localConfig.storagePort())
		}
	}
	// Currently only supported containers are "lxc" and "kvm".
	if containerType != instance.LXC && containerType != instance.KVM {
		return nil, fmt.Errorf("unsupported container type: %q", containerType)
	}
	dir, err := utils.NormalizePath(localConfig.rootDir())
	if err != nil {
		return nil, err
	}
	if dir == "." {
		dir = osenv.JujuHomePath(cfg.Name())
	}
	// Always assign the normalized path.
	localConfig.attrs["root-dir"] = dir

	// Apply the coerced unknown values back into the config.
	return cfg.Apply(localConfig.attrs)
}
示例#14
0
文件: environ.go 项目: xushiwei/juju
// newEnviron creates a new azureEnviron.
func newEnviron(provider *azureEnvironProvider, cfg *config.Config) (*azureEnviron, error) {
	env := azureEnviron{provider: provider}
	err := env.SetConfig(cfg)
	if err != nil {
		return nil, err
	}
	modelTag := names.NewModelTag(cfg.UUID())
	env.resourceGroup = resourceGroupName(modelTag, cfg.Name())
	env.envName = cfg.Name()
	return &env, nil
}
示例#15
0
文件: environ.go 项目: pmatulis/juju
// newEnviron creates a new azureEnviron.
func newEnviron(provider *azureEnvironProvider, cfg *config.Config) (*azureEnviron, error) {
	env := azureEnviron{provider: provider}
	err := env.SetConfig(cfg)
	if err != nil {
		return nil, err
	}
	env.resourceGroup = resourceGroupName(cfg)
	env.controllerResourceGroup = env.config.controllerResourceGroup
	env.envName = cfg.Name()
	return &env, nil
}
示例#16
0
// Open is specified in the EnvironProvider interface.
func (prov azureEnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Debugf("opening environment %q.", cfg.Name())
	// We can't return NewEnviron(cfg) directly here because otherwise,
	// when err is not nil, we end up with a non-nil returned environ and
	// this breaks the loop in cmd/jujud/upgrade.go:run() (see
	// http://golang.org/doc/faq#nil_error for the gory details).
	environ, err := NewEnviron(cfg)
	if err != nil {
		return nil, err
	}
	return environ, nil
}
示例#17
0
文件: provider.go 项目: makyo/juju
func (p EnvironProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Infof("opening model %q", cfg.Name())
	e := new(Environ)

	e.firewaller = p.FirewallerFactory.GetFirewaller(e)
	e.configurator = p.Configurator
	err := e.SetConfig(cfg)
	if err != nil {
		return nil, err
	}
	e.name = cfg.Name()
	return e, nil
}
示例#18
0
文件: environ.go 项目: makyo/juju
// newEnviron create a new Joyent environ instance from config.
func newEnviron(cfg *config.Config) (*joyentEnviron, error) {
	env := new(joyentEnviron)
	if err := env.SetConfig(cfg); err != nil {
		return nil, err
	}
	env.name = cfg.Name()
	var err error
	env.compute, err = newCompute(env.ecfg)
	if err != nil {
		return nil, err
	}
	return env, nil
}
示例#19
0
func (g *storageProvider) VolumeSource(environConfig *config.Config, cfg *storage.Config) (storage.VolumeSource, error) {
	// Connect and authenticate.
	env, err := newEnviron(environConfig)
	if err != nil {
		return nil, errors.Annotate(err, "cannot create an environ with this config")
	}

	source := &volumeSource{
		gce:       env.gce,
		envName:   environConfig.Name(),
		modelUUID: environConfig.UUID(),
	}
	return source, nil
}
示例#20
0
文件: cinder.go 项目: Pankov404/juju
// VolumeSource implements storage.Provider.
func (p *cinderProvider) VolumeSource(environConfig *config.Config, providerConfig *storage.Config) (storage.VolumeSource, error) {
	if err := p.ValidateConfig(providerConfig); err != nil {
		return nil, err
	}
	storageAdapter, err := p.newStorageAdapter(environConfig)
	if err != nil {
		return nil, err
	}
	source := &cinderVolumeSource{
		storageAdapter: storageAdapter,
		envName:        environConfig.Name(),
	}
	return source, nil
}
示例#21
0
文件: open.go 项目: zhouqt/juju
// Prepare prepares a new environment based on the provided configuration.
// If the environment is already prepared, it behaves like New.
func Prepare(cfg *config.Config, ctx BootstrapContext, store configstore.Storage) (Environ, error) {

	if p, err := Provider(cfg.Type()); err != nil {
		return nil, err
	} else if info, err := store.ReadInfo(cfg.Name()); errors.IsNotFound(errors.Cause(err)) {
		info = store.CreateInfo(cfg.Name())
		if env, err := prepare(ctx, cfg, info, p); err == nil {
			return env, decorateAndWriteInfo(info, env.Config())
		} else {
			if err := info.Destroy(); err != nil {
				logger.Warningf("cannot destroy newly created environment info: %v", err)
			}
			return nil, err
		}

	} else if err != nil {
		return nil, errors.Annotatef(err, "error reading environment info %q", cfg.Name())
	} else if !info.Initialized() {
		return nil,
			errors.Errorf(
				"found uninitialized environment info for %q; environment preparation probably in progress or interrupted",
				cfg.Name(),
			)
	} else if len(info.BootstrapConfig()) == 0 {
		return nil, errors.New("found environment info but no bootstrap config")
	} else {
		cfg, err = config.New(config.NoDefaults, info.BootstrapConfig())
		if err != nil {
			return nil, errors.Annotate(err, "cannot parse bootstrap config")
		}
		return New(cfg)
	}
}
示例#22
0
文件: environ.go 项目: bac/juju
// newEnviron create a new Joyent environ instance from config.
func newEnviron(cloud environs.CloudSpec, cfg *config.Config) (*joyentEnviron, error) {
	env := &joyentEnviron{
		name:  cfg.Name(),
		cloud: cloud,
	}
	if err := env.SetConfig(cfg); err != nil {
		return nil, err
	}
	var err error
	env.compute, err = newCompute(cloud)
	if err != nil {
		return nil, err
	}
	return env, nil
}
示例#23
0
文件: open.go 项目: rogpeppe/juju
// Initialize sets up an initial empty state and returns it.
// This needs to be performed only once for a given environment.
// It returns unauthorizedError if access is unauthorized.
func Initialize(info *Info, cfg *config.Config, opts mongo.DialOpts, policy Policy) (rst *State, err error) {
	st, err := Open(info, opts, policy)
	if err != nil {
		return nil, err
	}
	defer func() {
		if err != nil {
			st.Close()
		}
	}()
	// A valid environment is used as a signal that the
	// state has already been initalized. If this is the case
	// do nothing.
	if _, err := st.Environment(); err == nil {
		return st, nil
	} else if !errors.IsNotFound(err) {
		return nil, err
	}
	logger.Infof("initializing environment")
	if err := checkEnvironConfig(cfg); err != nil {
		return nil, err
	}
	uuid, err := utils.NewUUID()
	if err != nil {
		return nil, fmt.Errorf("environment UUID cannot be created: %v", err)
	}
	ops := []txn.Op{
		createConstraintsOp(st, environGlobalKey, constraints.Value{}),
		createSettingsOp(st, environGlobalKey, cfg.AllAttrs()),
		createEnvironmentOp(st, cfg.Name(), uuid.String()),
		{
			C:      st.stateServers.Name,
			Id:     environGlobalKey,
			Insert: &stateServersDoc{},
		}, {
			C:      st.stateServers.Name,
			Id:     apiHostPortsKey,
			Insert: &apiHostPortsDoc{},
		},
	}
	if err := st.runTransaction(ops); err == txn.ErrAborted {
		// The config was created in the meantime.
		return st, nil
	} else if err != nil {
		return nil, err
	}
	return st, nil
}
示例#24
0
文件: ebs.go 项目: pmatulis/juju
// VolumeSource is defined on the Provider interface.
func (e *ebsProvider) VolumeSource(environConfig *config.Config, cfg *storage.Config) (storage.VolumeSource, error) {
	ec2, _, _, err := awsClients(environConfig)
	if err != nil {
		return nil, errors.Annotate(err, "creating AWS clients")
	}
	uuid, ok := environConfig.UUID()
	if !ok {
		return nil, errors.NotFoundf("model UUID")
	}
	source := &ebsVolumeSource{
		ec2:       ec2,
		envName:   environConfig.Name(),
		modelUUID: uuid,
	}
	return source, nil
}
示例#25
0
文件: disks.go 项目: ktsakalozos/juju
// VolumeSource is defined on the Provider interface.
func (e *azureStorageProvider) VolumeSource(environConfig *config.Config, cfg *storage.Config) (storage.VolumeSource, error) {
	env, err := NewEnviron(environConfig)
	if err != nil {
		return nil, errors.Trace(err)
	}
	uuid, ok := environConfig.UUID()
	if !ok {
		return nil, errors.NotFoundf("environment UUID")
	}
	source := &azureVolumeSource{
		env:     env,
		envName: environConfig.Name(),
		envUUID: uuid,
	}
	return source, nil
}
示例#26
0
func (sp *StubProvider) Open(cfg *config.Config) (environs.Environ, error) {
	sp.MethodCall(sp, "Open", cfg)
	if err := sp.NextErr(); err != nil {
		return nil, err
	}
	switch cfg.Name() {
	case StubEnvironName:
		return EnvironInstance, nil
	case StubZonedEnvironName:
		return ZonedEnvironInstance, nil
	case StubNetworkingEnvironName:
		return NetworkingEnvironInstance, nil
	case StubZonedNetworkingEnvironName:
		return ZonedNetworkingEnvironInstance, nil
	}
	panic("unexpected model name: " + cfg.Name())
}
示例#27
0
文件: environ.go 项目: bac/juju
// newEnviron creates a new azureEnviron.
func newEnviron(
	provider *azureEnvironProvider,
	cloud environs.CloudSpec,
	cfg *config.Config,
) (*azureEnviron, error) {

	// The Azure storage code wants the endpoint host only, not the URL.
	storageEndpointURL, err := url.Parse(cloud.StorageEndpoint)
	if err != nil {
		return nil, errors.Annotate(err, "parsing storage endpoint URL")
	}

	env := azureEnviron{
		provider:        provider,
		cloud:           cloud,
		location:        canonicalLocation(cloud.Region),
		storageEndpoint: storageEndpointURL.Host,
	}
	if err := env.initEnviron(); err != nil {
		return nil, errors.Trace(err)
	}

	if err := env.SetConfig(cfg); err != nil {
		return nil, errors.Trace(err)
	}

	modelTag := names.NewModelTag(cfg.UUID())
	env.resourceGroup = resourceGroupName(modelTag, cfg.Name())
	env.envName = cfg.Name()

	// We need a deterministic storage account name, so that we can
	// defer creation of the storage account to the VM deployment,
	// and retain the ability to create multiple deployments in
	// parallel.
	//
	// We use the last 20 non-hyphen hex characters of the model's
	// UUID as the storage account name, prefixed with "juju". The
	// probability of clashing with another storage account should
	// be negligible.
	uuidAlphaNumeric := strings.Replace(env.config.Config.UUID(), "-", "", -1)
	env.storageAccountName = "juju" + uuidAlphaNumeric[len(uuidAlphaNumeric)-20:]

	return &env, nil
}
示例#28
0
// Open implements environs.EnvironProvider.Open.
func (environProvider) Open(cfg *config.Config) (environs.Environ, error) {
	logger.Infof("opening environment %q", cfg.Name())
	// Do the initial validation on the config.
	localConfig, err := providerInstance.newConfig(cfg)
	if err != nil {
		return nil, errors.Trace(err)
	}
	if err := VerifyPrerequisites(localConfig.container()); err != nil {
		return nil, errors.Annotate(err, "failed verification of local provider prerequisites")
	}
	if cfg, err = providerInstance.correctLocalhostURLs(cfg, localConfig); err != nil {
		return nil, errors.Annotate(err, "failed to replace localhost references in loopback URLs specified in proxy config settings")
	}
	environ := &localEnviron{name: cfg.Name()}
	if err := environ.SetConfig(cfg); err != nil {
		return nil, errors.Annotate(err, "failure setting config")
	}
	return environ, nil
}
示例#29
0
// VolumeSource implements storage.Provider.
func (p *cinderProvider) VolumeSource(environConfig *config.Config, providerConfig *storage.Config) (storage.VolumeSource, error) {
	if err := p.ValidateConfig(providerConfig); err != nil {
		return nil, err
	}
	storageAdapter, err := p.newStorageAdapter(environConfig)
	if err != nil {
		return nil, err
	}
	uuid, ok := environConfig.UUID()
	if !ok {
		return nil, errors.NotFoundf("environment UUID")
	}
	source := &cinderVolumeSource{
		storageAdapter: storageAdapter,
		envName:        environConfig.Name(),
		envUUID:        uuid,
	}
	return source, nil
}
示例#30
0
文件: open.go 项目: zhouqt/juju
// ensureCertificate generates a new CA certificate and
// attaches it to the given environment configuration,
// unless the configuration already has one.
func ensureCertificate(cfg *config.Config) (*config.Config, error) {
	_, hasCACert := cfg.CACert()
	_, hasCAKey := cfg.CAPrivateKey()
	if hasCACert && hasCAKey {
		return cfg, nil
	}
	if hasCACert && !hasCAKey {
		return nil, fmt.Errorf("environment configuration with a certificate but no CA private key")
	}

	caCert, caKey, err := cert.NewCA(cfg.Name(), time.Now().UTC().AddDate(10, 0, 0))
	if err != nil {
		return nil, err
	}
	return cfg.Apply(map[string]interface{}{
		"ca-cert":        string(caCert),
		"ca-private-key": string(caKey),
	})
}