// Certificate is used by clients to request a copy of their current certificate, or to
// request a reissuance of the certificate.
func (wfe *WebFrontEndImpl) Certificate(ctx context.Context, logEvent *requestEvent, response http.ResponseWriter, request *http.Request) {
serial := request.URL.Path
// Certificate paths consist of the CertBase path, plus exactly sixteen hex
// digits.
if !core.ValidSerial(serial) {
logEvent.AddError("certificate serial provided was not valid: %s", serial)
wfe.sendError(response, logEvent, probs.NotFound("Certificate not found"), nil)
return
}
logEvent.Extra["RequestedSerial"] = serial
cert, err := wfe.SA.GetCertificate(ctx, serial)
// TODO(#991): handle db errors
if err != nil {
logEvent.AddError("unable to get certificate by serial id %#v: %s", serial, err)
if strings.HasPrefix(err.Error(), "gorp: multiple rows returned") {
wfe.sendError(response, logEvent, probs.Conflict("Multiple certificates with same short serial"), err)
} else {
wfe.sendError(response, logEvent, probs.NotFound("Certificate not found"), err)
}
return
}
// TODO Content negotiation
response.Header().Set("Content-Type", "application/pkix-cert")
response.Header().Add("Link", link(issuerPath, "up"))
response.WriteHeader(http.StatusOK)
if _, err = response.Write(cert.DER); err != nil {
logEvent.AddError(err.Error())
wfe.log.Warning(fmt.Sprintf("Could not write response: %s", err))
}
return
}
// Certificate is used by clients to request a copy of their current certificate, or to
// request a reissuance of the certificate.
func (wfe *WebFrontEndImpl) Certificate(ctx context.Context, logEvent *requestEvent, response http.ResponseWriter, request *http.Request) {
path := request.URL.Path
// Certificate paths consist of the CertBase path, plus exactly sixteen hex
// digits.
if !strings.HasPrefix(path, CertPath) {
logEvent.AddError("this request path should not have gotten to Certificate: %#v is not a prefix of %#v", path, CertPath)
wfe.sendError(response, logEvent, probs.NotFound("Certificate not found"), nil)
addNoCacheHeader(response)
return
}
serial := path[len(CertPath):]
if !core.ValidSerial(serial) {
logEvent.AddError("certificate serial provided was not valid: %s", serial)
wfe.sendError(response, logEvent, probs.NotFound("Certificate not found"), nil)
addNoCacheHeader(response)
return
}
logEvent.Extra["RequestedSerial"] = serial
cert, err := wfe.SA.GetCertificate(ctx, serial)
// TODO(#991): handle db errors
if err != nil {
logEvent.AddError("unable to get certificate by serial id %#v: %s", serial, err)
if strings.HasPrefix(err.Error(), "gorp: multiple rows returned") {
wfe.sendError(response, logEvent, probs.Conflict("Multiple certificates with same short serial"), err)
} else {
addNoCacheHeader(response)
wfe.sendError(response, logEvent, probs.NotFound("Certificate not found"), err)
}
return
}
parsedCertificate, err := x509.ParseCertificate([]byte(cert.DER))
if err != nil {
logEvent.AddError("unable to parse certificate: %s", err)
wfe.sendError(response, logEvent, probs.Malformed("Unable to parse certificate"), err)
return
}
if err = wfe.addIssuerCertificateURLs(response, parsedCertificate); err != nil {
logEvent.AddError("unable to parse IssuingCertificateURL: %s", err)
wfe.sendError(response, logEvent, probs.Malformed("unable to parse IssuingCertificateURL"), err)
return
}
addCacheHeader(response, wfe.CertCacheDuration.Seconds())
// TODO Content negotiation
response.Header().Set("Content-Type", "application/pkix-cert")
response.WriteHeader(http.StatusOK)
if _, err = response.Write(cert.DER); err != nil {
logEvent.AddError(err.Error())
wfe.log.Warning(fmt.Sprintf("Could not write response: %s", err))
}
return
}
// RevokeCertificate is used by clients to request the revocation of a cert.
func (wfe *WebFrontEndImpl) RevokeCertificate(logEvent *requestEvent, response http.ResponseWriter, request *http.Request) {
// We don't ask verifyPOST to verify there is a corresponding registration,
// because anyone with the right private key can revoke a certificate.
body, requestKey, registration, prob := wfe.verifyPOST(logEvent, request, false, core.ResourceRevokeCert)
if prob != nil {
// verifyPOST handles its own setting of logEvent.Errors
wfe.sendError(response, logEvent, prob, nil)
return
}
type RevokeRequest struct {
CertificateDER core.JSONBuffer `json:"certificate"`
}
var revokeRequest RevokeRequest
if err := json.Unmarshal(body, &revokeRequest); err != nil {
logEvent.AddError(fmt.Sprintf("Couldn't unmarshal in revoke request %s", string(body)))
wfe.sendError(response, logEvent, probs.Malformed("Unable to JSON parse revoke request"), err)
return
}
providedCert, err := x509.ParseCertificate(revokeRequest.CertificateDER)
if err != nil {
logEvent.AddError("unable to parse revoke certificate DER: %s", err)
wfe.sendError(response, logEvent, probs.Malformed("Unable to parse certificate DER"), err)
return
}
serial := core.SerialToString(providedCert.SerialNumber)
logEvent.Extra["ProvidedCertificateSerial"] = serial
cert, err := wfe.SA.GetCertificate(serial)
// TODO(#991): handle db errors better
if err != nil || !bytes.Equal(cert.DER, revokeRequest.CertificateDER) {
wfe.sendError(response, logEvent, probs.NotFound("No such certificate"), err)
return
}
parsedCertificate, err := x509.ParseCertificate(cert.DER)
if err != nil {
// InternalServerError because this is a failure to decode from our DB.
wfe.sendError(response, logEvent, probs.ServerInternal("invalid parse of stored certificate"), err)
return
}
logEvent.Extra["RetrievedCertificateSerial"] = core.SerialToString(parsedCertificate.SerialNumber)
logEvent.Extra["RetrievedCertificateDNSNames"] = parsedCertificate.DNSNames
logEvent.Extra["RetrievedCertificateEmailAddresses"] = parsedCertificate.EmailAddresses
logEvent.Extra["RetrievedCertificateIPAddresses"] = parsedCertificate.IPAddresses
certStatus, err := wfe.SA.GetCertificateStatus(serial)
if err != nil {
logEvent.AddError("unable to get certificate status: %s", err)
// TODO(#991): handle db errors
wfe.sendError(response, logEvent, probs.NotFound("Certificate status not yet available"), err)
return
}
logEvent.Extra["CertificateStatus"] = certStatus.Status
if certStatus.Status == core.OCSPStatusRevoked {
logEvent.AddError("Certificate already revoked: %#v", serial)
wfe.sendError(response, logEvent, probs.Conflict("Certificate already revoked"), nil)
return
}
// TODO: Implement method of revocation by authorizations on account.
if !(core.KeyDigestEquals(requestKey, parsedCertificate.PublicKey) ||
registration.ID == cert.RegistrationID) {
wfe.sendError(response, logEvent,
probs.Unauthorized("Revocation request must be signed by private key of cert to be revoked, or by the account key of the account that issued it."),
nil)
return
}
// Use revocation code 0, meaning "unspecified"
err = wfe.RA.RevokeCertificateWithReg(*parsedCertificate, 0, registration.ID)
if err != nil {
logEvent.AddError("failed to revoke certificate: %s", err)
wfe.sendError(response, logEvent, core.ProblemDetailsForError(err, "Failed to revoke certificate"), err)
} else {
wfe.log.Debug(fmt.Sprintf("Revoked %v", serial))
response.WriteHeader(http.StatusOK)
}
}
// NewRegistration is used by clients to submit a new registration/account
func (wfe *WebFrontEndImpl) NewRegistration(logEvent *requestEvent, response http.ResponseWriter, request *http.Request) {
body, key, _, prob := wfe.verifyPOST(logEvent, request, false, core.ResourceNewReg)
if prob != nil {
// verifyPOST handles its own setting of logEvent.Errors
wfe.sendError(response, logEvent, prob, nil)
return
}
if existingReg, err := wfe.SA.GetRegistrationByKey(*key); err == nil {
response.Header().Set("Location", fmt.Sprintf("%s%d", wfe.RegBase, existingReg.ID))
// TODO(#595): check for missing registration err
wfe.sendError(response, logEvent, probs.Conflict("Registration key is already in use"), err)
return
}
var init core.Registration
err := json.Unmarshal(body, &init)
if err != nil {
wfe.sendError(response, logEvent, probs.Malformed("Error unmarshaling JSON"), err)
return
}
if len(init.Agreement) > 0 && init.Agreement != wfe.SubscriberAgreementURL {
msg := fmt.Sprintf("Provided agreement URL [%s] does not match current agreement URL [%s]", init.Agreement, wfe.SubscriberAgreementURL)
wfe.sendError(response, logEvent, probs.Malformed(msg), nil)
return
}
init.Key = *key
init.InitialIP = net.ParseIP(request.Header.Get("X-Real-IP"))
if init.InitialIP == nil {
host, _, err := net.SplitHostPort(request.RemoteAddr)
if err == nil {
init.InitialIP = net.ParseIP(host)
} else {
logEvent.AddError("Couldn't parse RemoteAddr: %s", request.RemoteAddr)
wfe.sendError(response, logEvent, probs.ServerInternal("couldn't parse the remote (that is, the client's) address"), nil)
return
}
}
reg, err := wfe.RA.NewRegistration(init)
if err != nil {
logEvent.AddError("unable to create new registration: %s", err)
wfe.sendError(response, logEvent, core.ProblemDetailsForError(err, "Error creating new registration"), err)
return
}
logEvent.Requester = reg.ID
logEvent.Contacts = reg.Contact
// Use an explicitly typed variable. Otherwise `go vet' incorrectly complains
// that reg.ID is a string being passed to %d.
regURL := fmt.Sprintf("%s%d", wfe.RegBase, reg.ID)
responseBody, err := json.Marshal(reg)
if err != nil {
// ServerInternal because we just created this registration, and it
// should be OK.
logEvent.AddError("unable to marshal registration: %s", err)
wfe.sendError(response, logEvent, probs.ServerInternal("Error marshaling registration"), err)
return
}
response.Header().Add("Location", regURL)
response.Header().Set("Content-Type", "application/json")
response.Header().Add("Link", link(wfe.NewAuthz, "next"))
if len(wfe.SubscriberAgreementURL) > 0 {
response.Header().Add("Link", link(wfe.SubscriberAgreementURL, "terms-of-service"))
}
response.WriteHeader(http.StatusCreated)
response.Write(responseBody)
}
