示例#1
0
文件: run.go 项目: remh/docker
// Run implements the exec driver Driver interface
func (d *Driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (execdriver.ExitStatus, error) {

	var (
		term                           execdriver.Terminal
		err                            error
		inListen, outListen, errListen *npipe.PipeListener
	)

	// Make sure the client isn't asking for options which aren't supported
	err = checkSupportedOptions(c)
	if err != nil {
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	cu := &containerInit{
		SystemType:              "Container",
		Name:                    c.ID,
		IsDummy:                 dummyMode,
		VolumePath:              c.Rootfs,
		IgnoreFlushesDuringBoot: c.FirstStart,
		LayerFolderPath:         c.LayerFolder,
	}

	for i := 0; i < len(c.LayerPaths); i++ {
		cu.Layers = append(cu.Layers, layer{
			ID:   hcsshim.NewGUID(c.LayerPaths[i]).ToString(),
			Path: c.LayerPaths[i],
		})
	}

	// TODO Windows. At some point, when there is CLI on docker run to
	// enable the IP Address of the container to be passed into docker run,
	// the IP Address needs to be wired through to HCS in the JSON. It
	// would be present in c.Network.Interface.IPAddress. See matching
	// TODO in daemon\container_windows.go, function populateCommand.

	if c.Network.Interface != nil {

		var pbs []portBinding

		// Enumerate through the port bindings specified by the user and convert
		// them into the internal structure matching the JSON blob that can be
		// understood by the HCS.
		for i, v := range c.Network.Interface.PortBindings {
			proto := strings.ToUpper(i.Proto())
			if proto != "TCP" && proto != "UDP" {
				return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid protocol %s", i.Proto())
			}

			if len(v) > 1 {
				return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support more than one host port in NAT settings")
			}

			for _, v2 := range v {
				var (
					iPort, ePort int
					err          error
				)
				if len(v2.HostIP) != 0 {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support host IP addresses in NAT settings")
				}
				if ePort, err = strconv.Atoi(v2.HostPort); err != nil {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid container port %s: %s", v2.HostPort, err)
				}
				if iPort, err = strconv.Atoi(i.Port()); err != nil {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid internal port %s: %s", i.Port(), err)
				}
				if iPort < 0 || iPort > 65535 || ePort < 0 || ePort > 65535 {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("specified NAT port is not in allowed range")
				}
				pbs = append(pbs,
					portBinding{ExternalPort: ePort,
						InternalPort: iPort,
						Protocol:     proto})
			}
		}

		// TODO Windows: TP3 workaround. Allow the user to override the name of
		// the Container NAT device through an environment variable. This will
		// ultimately be a global daemon parameter on Windows, similar to -b
		// for the name of the virtual switch (aka bridge).
		cn := os.Getenv("DOCKER_CONTAINER_NAT")
		if len(cn) == 0 {
			cn = defaultContainerNAT
		}

		dev := device{
			DeviceType: "Network",
			Connection: &networkConnection{
				NetworkName: c.Network.Interface.Bridge,
				// TODO Windows: Fixme, next line. Needs HCS fix.
				EnableNat: false,
				Nat: natSettings{
					Name:         cn,
					PortBindings: pbs,
				},
			},
		}

		if c.Network.Interface.MacAddress != "" {
			windowsStyleMAC := strings.Replace(
				c.Network.Interface.MacAddress, ":", "-", -1)
			dev.Settings = networkSettings{
				MacAddress: windowsStyleMAC,
			}
		}
		cu.Devices = append(cu.Devices, dev)
	} else {
		logrus.Debugln("No network interface")
	}

	configurationb, err := json.Marshal(cu)
	if err != nil {
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	configuration := string(configurationb)

	err = hcsshim.CreateComputeSystem(c.ID, configuration)
	if err != nil {
		logrus.Debugln("Failed to create temporary container ", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Start the container
	logrus.Debugln("Starting container ", c.ID)
	err = hcsshim.StartComputeSystem(c.ID)
	if err != nil {
		logrus.Errorf("Failed to start compute system: %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}
	defer func() {
		// Stop the container

		if terminateMode {
			logrus.Debugf("Terminating container %s", c.ID)
			if err := hcsshim.TerminateComputeSystem(c.ID); err != nil {
				// IMPORTANT: Don't fail if fails to change state. It could already
				// have been stopped through kill().
				// Otherwise, the docker daemon will hang in job wait()
				logrus.Warnf("Ignoring error from TerminateComputeSystem %s", err)
			}
		} else {
			logrus.Debugf("Shutting down container %s", c.ID)
			if err := hcsshim.ShutdownComputeSystem(c.ID); err != nil {
				// IMPORTANT: Don't fail if fails to change state. It could already
				// have been stopped through kill().
				// Otherwise, the docker daemon will hang in job wait()
				logrus.Warnf("Ignoring error from ShutdownComputeSystem %s", err)
			}
		}
	}()

	// We use a different pipe name between real and dummy mode in the HCS
	var serverPipeFormat, clientPipeFormat string
	if dummyMode {
		clientPipeFormat = `\\.\pipe\docker-run-%[1]s-%[2]s`
		serverPipeFormat = clientPipeFormat
	} else {
		clientPipeFormat = `\\.\pipe\docker-run-%[2]s`
		serverPipeFormat = `\\.\Containers\%[1]s\Device\NamedPipe\docker-run-%[2]s`
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   c.ProcessConfig.Tty,
		WorkingDirectory: c.WorkingDir,
		ConsoleSize:      c.ProcessConfig.ConsoleSize,
	}

	// Configure the environment for the process
	createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)

	// Connect stdin
	if pipes.Stdin != nil {
		stdInPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdin")
		createProcessParms.StdInPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdin")

		// Listen on the named pipe
		inListen, err = npipe.Listen(stdInPipe)
		if err != nil {
			logrus.Errorf("stdin failed to listen on %s err=%s", stdInPipe, err)
			return execdriver.ExitStatus{ExitCode: -1}, err
		}
		defer inListen.Close()

		// Launch a goroutine to do the accept. We do this so that we can
		// cause an otherwise blocking goroutine to gracefully close when
		// the caller (us) closes the listener
		go stdinAccept(inListen, stdInPipe, pipes.Stdin)
	}

	// Connect stdout
	stdOutPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdout")
	createProcessParms.StdOutPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdout")

	outListen, err = npipe.Listen(stdOutPipe)
	if err != nil {
		logrus.Errorf("stdout failed to listen on %s err=%s", stdOutPipe, err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}
	defer outListen.Close()
	go stdouterrAccept(outListen, stdOutPipe, pipes.Stdout)

	// No stderr on TTY.
	if !c.ProcessConfig.Tty {
		// Connect stderr
		stdErrPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stderr")
		createProcessParms.StdErrPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stderr")
		errListen, err = npipe.Listen(stdErrPipe)
		if err != nil {
			logrus.Errorf("stderr failed to listen on %s err=%s", stdErrPipe, err)
			return execdriver.ExitStatus{ExitCode: -1}, err
		}
		defer errListen.Close()
		go stdouterrAccept(errListen, stdErrPipe, pipes.Stderr)
	}

	// This should get caught earlier, but just in case - validate that we
	// have something to run
	if c.ProcessConfig.Entrypoint == "" {
		err = errors.New("No entrypoint specified")
		logrus.Error(err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Build the command line of the process
	createProcessParms.CommandLine = c.ProcessConfig.Entrypoint
	for _, arg := range c.ProcessConfig.Arguments {
		logrus.Debugln("appending ", arg)
		createProcessParms.CommandLine += " " + arg
	}
	logrus.Debugf("CommandLine: %s", createProcessParms.CommandLine)

	// Start the command running in the container.
	var pid uint32
	pid, err = hcsshim.CreateProcessInComputeSystem(c.ID, createProcessParms)

	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	//Save the PID as we'll need this in Kill()
	logrus.Debugf("PID %d", pid)
	c.ContainerPid = int(pid)

	if c.ProcessConfig.Tty {
		term = NewTtyConsole(c.ID, pid)
	} else {
		term = NewStdConsole()
	}
	c.ProcessConfig.Terminal = term

	// Maintain our list of active containers. We'll need this later for exec
	// and other commands.
	d.Lock()
	d.activeContainers[c.ID] = &activeContainer{
		command: c,
	}
	d.Unlock()

	// Invoke the start callback
	if startCallback != nil {
		startCallback(&c.ProcessConfig, int(pid))
	}

	var exitCode int32
	exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid)
	if err != nil {
		logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
	return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}
示例#2
0
// AddProcess is the handler for adding a process to an already running
// container. It's called through docker exec.
func (clnt *client) AddProcess(containerID, processFriendlyName string, procToAdd Process) error {

	clnt.lock(containerID)
	defer clnt.unlock(containerID)
	container, err := clnt.getContainer(containerID)
	if err != nil {
		return err
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole: procToAdd.Terminal,
		ConsoleSize:    procToAdd.InitialConsoleSize,
	}

	// Take working directory from the process to add if it is defined,
	// otherwise take from the first process.
	if procToAdd.Cwd != "" {
		createProcessParms.WorkingDirectory = procToAdd.Cwd
	} else {
		createProcessParms.WorkingDirectory = container.ociSpec.Process.Cwd
	}

	// Configure the environment for the process
	createProcessParms.Environment = setupEnvironmentVariables(procToAdd.Env)
	createProcessParms.CommandLine = strings.Join(procToAdd.Args, " ")

	logrus.Debugf("commandLine: %s", createProcessParms.CommandLine)

	// Start the command running in the container. Note we always tell HCS to
	// create stdout as it's required regardless of '-i' or '-t' options, so that
	// docker can always grab the output through logs. We also tell HCS to always
	// create stdin, even if it's not used - it will be closed shortly. Stderr
	// is only created if it we're not -t.
	var stdout, stderr io.ReadCloser
	var pid uint32
	iopipe := &IOPipe{Terminal: procToAdd.Terminal}
	pid, iopipe.Stdin, stdout, stderr, err = hcsshim.CreateProcessInComputeSystem(
		containerID,
		true,
		true,
		!procToAdd.Terminal,
		createProcessParms)
	if err != nil {
		logrus.Errorf("AddProcess %s CreateProcessInComputeSystem() failed %s", containerID, err)
		return err
	}

	// Convert io.ReadClosers to io.Readers
	if stdout != nil {
		iopipe.Stdout = openReaderFromPipe(stdout)
	}
	if stderr != nil {
		iopipe.Stderr = openReaderFromPipe(stderr)
	}

	// Add the process to the containers list of processes
	container.processes[processFriendlyName] =
		&process{
			processCommon: processCommon{
				containerID:  containerID,
				friendlyName: processFriendlyName,
				client:       clnt,
				systemPid:    pid,
			},
			commandLine: createProcessParms.CommandLine,
		}

	// Make sure the lock is not held while calling back into the daemon
	clnt.unlock(containerID)

	// Tell the engine to attach streams back to the client
	if err := clnt.backend.AttachStreams(processFriendlyName, *iopipe); err != nil {
		return err
	}

	// Lock again so that the defer unlock doesn't fail. (I really don't like this code)
	clnt.lock(containerID)

	// Spin up a go routine waiting for exit to handle cleanup
	go container.waitExit(pid, processFriendlyName, false)

	return nil
}
示例#3
0
文件: exec.go 项目: rajasec/docker
func (d *driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (int, error) {

	var (
		inListen, outListen, errListen     *npipe.PipeListener
		term                               execdriver.Terminal
		err                                error
		randomID                           string = stringid.GenerateNonCryptoID()
		serverPipeFormat, clientPipeFormat string
		pid                                uint32
		exitCode                           int32
	)

	active := d.activeContainers[c.ID]
	if active == nil {
		return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   processConfig.Tty, // Note NOT c.ProcessConfig.Tty
		WorkingDirectory: c.WorkingDir,
	}

	// Configure the environment for the process // Note NOT c.ProcessConfig.Tty
	createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)

	// We use another unique ID here for each exec instance otherwise it
	// may conflict with the pipe name being used by RUN.

	// We use a different pipe name between real and dummy mode in the HCS
	if dummyMode {
		clientPipeFormat = `\\.\pipe\docker-exec-%[1]s-%[2]s-%[3]s`
		serverPipeFormat = clientPipeFormat
	} else {
		clientPipeFormat = `\\.\pipe\docker-exec-%[2]s-%[3]s`
		serverPipeFormat = `\\.\Containers\%[1]s\Device\NamedPipe\docker-exec-%[2]s-%[3]s`
	}

	// Connect stdin
	if pipes.Stdin != nil {
		stdInPipe := fmt.Sprintf(serverPipeFormat, c.ID, randomID, "stdin")
		createProcessParms.StdInPipe = fmt.Sprintf(clientPipeFormat, c.ID, randomID, "stdin")

		// Listen on the named pipe
		inListen, err = npipe.Listen(stdInPipe)
		if err != nil {
			logrus.Errorf("stdin failed to listen on %s %s ", stdInPipe, err)
			return -1, err
		}
		defer inListen.Close()

		// Launch a goroutine to do the accept. We do this so that we can
		// cause an otherwise blocking goroutine to gracefully close when
		// the caller (us) closes the listener
		go stdinAccept(inListen, stdInPipe, pipes.Stdin)
	}

	// Connect stdout
	stdOutPipe := fmt.Sprintf(serverPipeFormat, c.ID, randomID, "stdout")
	createProcessParms.StdOutPipe = fmt.Sprintf(clientPipeFormat, c.ID, randomID, "stdout")

	outListen, err = npipe.Listen(stdOutPipe)
	if err != nil {
		logrus.Errorf("stdout failed to listen on %s %s", stdOutPipe, err)
		return -1, err
	}
	defer outListen.Close()
	go stdouterrAccept(outListen, stdOutPipe, pipes.Stdout)

	// No stderr on TTY. Note NOT c.ProcessConfig.Tty
	if !processConfig.Tty {
		// Connect stderr
		stdErrPipe := fmt.Sprintf(serverPipeFormat, c.ID, randomID, "stderr")
		createProcessParms.StdErrPipe = fmt.Sprintf(clientPipeFormat, c.ID, randomID, "stderr")

		errListen, err = npipe.Listen(stdErrPipe)
		if err != nil {
			logrus.Errorf("Stderr failed to listen on %s %s", stdErrPipe, err)
			return -1, err
		}
		defer errListen.Close()
		go stdouterrAccept(errListen, stdErrPipe, pipes.Stderr)
	}

	// While this should get caught earlier, just in case, validate that we
	// have something to run.
	if processConfig.Entrypoint == "" {
		err = errors.New("No entrypoint specified")
		logrus.Error(err)
		return -1, err
	}

	// Build the command line of the process
	createProcessParms.CommandLine = processConfig.Entrypoint
	for _, arg := range processConfig.Arguments {
		logrus.Debugln("appending ", arg)
		createProcessParms.CommandLine += " " + arg
	}
	logrus.Debugln("commandLine: ", createProcessParms.CommandLine)

	// Start the command running in the container.
	pid, err = hcsshim.CreateProcessInComputeSystem(c.ID, createProcessParms)

	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
		return -1, err
	}

	// Note NOT c.ProcessConfig.Tty
	if processConfig.Tty {
		term = NewTtyConsole(c.ID, pid)
	} else {
		term = NewStdConsole()
	}
	processConfig.Terminal = term

	// Invoke the start callback
	if startCallback != nil {
		startCallback(&c.ProcessConfig, int(pid))
	}

	if exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid); err != nil {
		logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
		return -1, err
	}

	// TODO Windows - Do something with this exit code
	logrus.Debugln("Exiting Run() with ExitCode 0", c.ID)
	return int(exitCode), nil
}
示例#4
0
文件: exec.go 项目: ch3lo/docker
// Exec implements the exec driver Driver interface.
func (d *Driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (int, error) {

	var (
		term     execdriver.Terminal
		err      error
		exitCode int32
	)

	active := d.activeContainers[c.ID]
	if active == nil {
		return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   processConfig.Tty, // Note NOT c.ProcessConfig.Tty
		WorkingDirectory: c.WorkingDir,
	}

	// Configure the environment for the process // Note NOT c.ProcessConfig.Tty
	createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)

	// While this should get caught earlier, just in case, validate that we
	// have something to run.
	if processConfig.Entrypoint == "" {
		err = errors.New("No entrypoint specified")
		logrus.Error(err)
		return -1, err
	}

	// Build the command line of the process
	createProcessParms.CommandLine = processConfig.Entrypoint
	for _, arg := range processConfig.Arguments {
		logrus.Debugln("appending ", arg)
		createProcessParms.CommandLine += " " + arg
	}
	logrus.Debugln("commandLine: ", createProcessParms.CommandLine)

	// Start the command running in the container.
	pid, stdin, stdout, stderr, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !processConfig.Tty, createProcessParms)
	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
		return -1, err
	}

	// Now that the process has been launched, begin copying data to and from
	// the named pipes for the std handles.
	setupPipes(stdin, stdout, stderr, pipes)

	// Note NOT c.ProcessConfig.Tty
	if processConfig.Tty {
		term = NewTtyConsole(c.ID, pid)
	} else {
		term = NewStdConsole()
	}
	processConfig.Terminal = term

	// Invoke the start callback
	if startCallback != nil {
		startCallback(&c.ProcessConfig, int(pid))
	}

	if exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid); err != nil {
		logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
		return -1, err
	}

	// TODO Windows - Do something with this exit code
	logrus.Debugln("Exiting Run() with ExitCode 0", c.ID)
	return int(exitCode), nil
}
示例#5
0
func (ctr *container) start() error {
	var err error

	// Start the container
	logrus.Debugln("Starting container ", ctr.containerID)
	if err = hcsshim.StartComputeSystem(ctr.containerID); err != nil {
		logrus.Errorf("Failed to start compute system: %s", err)
		return err
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   ctr.ociSpec.Process.Terminal,
		WorkingDirectory: ctr.ociSpec.Process.Cwd,
		ConsoleSize:      ctr.ociSpec.Process.InitialConsoleSize,
	}

	// Configure the environment for the process
	createProcessParms.Environment = setupEnvironmentVariables(ctr.ociSpec.Process.Env)
	createProcessParms.CommandLine = strings.Join(ctr.ociSpec.Process.Args, " ")

	iopipe := &IOPipe{Terminal: ctr.ociSpec.Process.Terminal}

	// Start the command running in the container. Note we always tell HCS to
	// create stdout as it's required regardless of '-i' or '-t' options, so that
	// docker can always grab the output through logs. We also tell HCS to always
	// create stdin, even if it's not used - it will be closed shortly. Stderr
	// is only created if it we're not -t.
	var pid uint32
	var stdout, stderr io.ReadCloser
	pid, iopipe.Stdin, stdout, stderr, err = hcsshim.CreateProcessInComputeSystem(
		ctr.containerID,
		true,
		true,
		!ctr.ociSpec.Process.Terminal,
		createProcessParms)
	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)

		// Explicitly terminate the compute system here.
		if err2 := hcsshim.TerminateComputeSystem(ctr.containerID, hcsshim.TimeoutInfinite, "CreateProcessInComputeSystem failed"); err2 != nil {
			// Ignore this error, there's not a lot we can do except log it
			logrus.Warnf("Failed to TerminateComputeSystem after a failed CreateProcessInComputeSystem. Ignoring this.", err2)
		} else {
			logrus.Debugln("Cleaned up after failed CreateProcessInComputeSystem by calling TerminateComputeSystem")
		}
		return err
	}

	// Convert io.ReadClosers to io.Readers
	if stdout != nil {
		iopipe.Stdout = openReaderFromPipe(stdout)
	}
	if stderr != nil {
		iopipe.Stderr = openReaderFromPipe(stderr)
	}

	// Save the PID
	logrus.Debugf("Process started - PID %d", pid)
	ctr.systemPid = uint32(pid)

	// Spin up a go routine waiting for exit to handle cleanup
	go ctr.waitExit(pid, InitFriendlyName, true)

	ctr.client.appendContainer(ctr)

	if err := ctr.client.backend.AttachStreams(ctr.containerID, *iopipe); err != nil {
		// OK to return the error here, as waitExit will handle tear-down in HCS
		return err
	}

	// Tell the docker engine that the container has started.
	si := StateInfo{
		State: StateStart,
		Pid:   ctr.systemPid, // Not sure this is needed? Double-check monitor.go in daemon BUGBUG @jhowardmsft
	}
	return ctr.client.backend.StateChanged(ctr.containerID, si)

}
示例#6
0
文件: exec.go 项目: newdeamon/docker
// Exec implements the exec driver Driver interface.
func (d *Driver) Exec(c *execdriver.Command, processConfig *execdriver.ProcessConfig, pipes *execdriver.Pipes, hooks execdriver.Hooks) (int, error) {

	var (
		term     execdriver.Terminal
		err      error
		exitCode int32
		errno    uint32
	)

	active := d.activeContainers[c.ID]
	if active == nil {
		return -1, fmt.Errorf("Exec - No active container exists with ID %s", c.ID)
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   processConfig.Tty, // Note NOT c.ProcessConfig.Tty
		WorkingDirectory: c.WorkingDir,
	}

	// Configure the environment for the process // Note NOT c.ProcessConfig.Tty
	createProcessParms.Environment = setupEnvironmentVariables(processConfig.Env)

	// While this should get caught earlier, just in case, validate that we
	// have something to run.
	if processConfig.Entrypoint == "" {
		err = errors.New("No entrypoint specified")
		logrus.Error(err)
		return -1, err
	}

	// Build the command line of the process
	createProcessParms.CommandLine = processConfig.Entrypoint
	for _, arg := range processConfig.Arguments {
		logrus.Debugln("appending ", arg)
		createProcessParms.CommandLine += " " + arg
	}
	logrus.Debugln("commandLine: ", createProcessParms.CommandLine)

	// Start the command running in the container.
	pid, stdin, stdout, stderr, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !processConfig.Tty, createProcessParms)
	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
		return -1, err
	}

	// Now that the process has been launched, begin copying data to and from
	// the named pipes for the std handles.
	setupPipes(stdin, stdout, stderr, pipes)

	// Note NOT c.ProcessConfig.Tty
	if processConfig.Tty {
		term = NewTtyConsole(c.ID, pid)
	} else {
		term = NewStdConsole()
	}
	processConfig.Terminal = term

	// Invoke the start callback
	if hooks.Start != nil {
		// A closed channel for OOM is returned here as it will be
		// non-blocking and return the correct result when read.
		chOOM := make(chan struct{})
		close(chOOM)
		hooks.Start(&c.ProcessConfig, int(pid), chOOM)
	}

	if exitCode, errno, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid, hcsshim.TimeoutInfinite); err != nil {
		if errno == hcsshim.Win32PipeHasBeenEnded {
			logrus.Debugf("Exiting Run() after WaitForProcessInComputeSystem failed with recognised error 0x%X", errno)
			return hcsshim.WaitErrExecFailed, nil
		}
		logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): 0x%X %s", errno, err)
		return -1, err
	}

	logrus.Debugln("Exiting Run()", c.ID)
	return int(exitCode), nil
}
示例#7
0
文件: run.go 项目: maaquib/docker
// Run implements the exec driver Driver interface
func (d *Driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, hooks execdriver.Hooks) (execdriver.ExitStatus, error) {

	var (
		term execdriver.Terminal
		err  error
	)

	// Make sure the client isn't asking for options which aren't supported
	err = checkSupportedOptions(c)
	if err != nil {
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	cu := &containerInit{
		SystemType:              "Container",
		Name:                    c.ID,
		Owner:                   defaultOwner,
		IsDummy:                 dummyMode,
		VolumePath:              c.Rootfs,
		IgnoreFlushesDuringBoot: c.FirstStart,
		LayerFolderPath:         c.LayerFolder,
		ProcessorWeight:         c.Resources.CPUShares,
		HostName:                c.Hostname,
	}

	for _, layerPath := range c.LayerPaths {
		_, filename := filepath.Split(layerPath)
		g, err := hcsshim.NameToGuid(filename)
		if err != nil {
			return execdriver.ExitStatus{ExitCode: -1}, err
		}
		cu.Layers = append(cu.Layers, layer{
			ID:   g.ToString(),
			Path: layerPath,
		})
	}

	// Add the mounts (volumes, bind mounts etc) to the structure
	mds := make([]mappedDir, len(c.Mounts))
	for i, mount := range c.Mounts {
		mds[i] = mappedDir{
			HostPath:      mount.Source,
			ContainerPath: mount.Destination,
			ReadOnly:      !mount.Writable}
	}
	cu.MappedDirectories = mds

	// TODO Windows. At some point, when there is CLI on docker run to
	// enable the IP Address of the container to be passed into docker run,
	// the IP Address needs to be wired through to HCS in the JSON. It
	// would be present in c.Network.Interface.IPAddress. See matching
	// TODO in daemon\container_windows.go, function populateCommand.

	if c.Network.Interface != nil {

		var pbs []portBinding

		// Enumerate through the port bindings specified by the user and convert
		// them into the internal structure matching the JSON blob that can be
		// understood by the HCS.
		for i, v := range c.Network.Interface.PortBindings {
			proto := strings.ToUpper(i.Proto())
			if proto != "TCP" && proto != "UDP" {
				return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid protocol %s", i.Proto())
			}

			if len(v) > 1 {
				return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support more than one host port in NAT settings")
			}

			for _, v2 := range v {
				var (
					iPort, ePort int
					err          error
				)
				if len(v2.HostIP) != 0 {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("Windows does not support host IP addresses in NAT settings")
				}
				if ePort, err = strconv.Atoi(v2.HostPort); err != nil {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid container port %s: %s", v2.HostPort, err)
				}
				if iPort, err = strconv.Atoi(i.Port()); err != nil {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("invalid internal port %s: %s", i.Port(), err)
				}
				if iPort < 0 || iPort > 65535 || ePort < 0 || ePort > 65535 {
					return execdriver.ExitStatus{ExitCode: -1}, fmt.Errorf("specified NAT port is not in allowed range")
				}
				pbs = append(pbs,
					portBinding{ExternalPort: ePort,
						InternalPort: iPort,
						Protocol:     proto})
			}
		}

		// TODO Windows: TP3 workaround. Allow the user to override the name of
		// the Container NAT device through an environment variable. This will
		// ultimately be a global daemon parameter on Windows, similar to -b
		// for the name of the virtual switch (aka bridge).
		cn := os.Getenv("DOCKER_CONTAINER_NAT")
		if len(cn) == 0 {
			cn = defaultContainerNAT
		}

		dev := device{
			DeviceType: "Network",
			Connection: &networkConnection{
				NetworkName: c.Network.Interface.Bridge,
				// TODO Windows: Fixme, next line. Needs HCS fix.
				EnableNat: false,
				Nat: natSettings{
					Name:         cn,
					PortBindings: pbs,
				},
			},
		}

		if c.Network.Interface.MacAddress != "" {
			windowsStyleMAC := strings.Replace(
				c.Network.Interface.MacAddress, ":", "-", -1)
			dev.Settings = networkSettings{
				MacAddress: windowsStyleMAC,
			}
		}
		cu.Devices = append(cu.Devices, dev)
	} else {
		logrus.Debugln("No network interface")
	}

	configurationb, err := json.Marshal(cu)
	if err != nil {
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	configuration := string(configurationb)

	err = hcsshim.CreateComputeSystem(c.ID, configuration)
	if err != nil {
		logrus.Debugln("Failed to create temporary container ", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Start the container
	logrus.Debugln("Starting container ", c.ID)
	err = hcsshim.StartComputeSystem(c.ID)
	if err != nil {
		logrus.Errorf("Failed to start compute system: %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}
	defer func() {
		// Stop the container
		if forceKill {
			logrus.Debugf("Forcibly terminating container %s", c.ID)
			if errno, err := hcsshim.TerminateComputeSystem(c.ID, hcsshim.TimeoutInfinite, "exec-run-defer"); err != nil {
				logrus.Warnf("Ignoring error from TerminateComputeSystem 0x%X %s", errno, err)
			}
		} else {
			logrus.Debugf("Shutting down container %s", c.ID)
			if errno, err := hcsshim.ShutdownComputeSystem(c.ID, hcsshim.TimeoutInfinite, "exec-run-defer"); err != nil {
				if errno != hcsshim.Win32SystemShutdownIsInProgress &&
					errno != hcsshim.Win32SpecifiedPathInvalid &&
					errno != hcsshim.Win32SystemCannotFindThePathSpecified {
					logrus.Warnf("Ignoring error from ShutdownComputeSystem 0x%X %s", errno, err)
				}
			}
		}
	}()

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   c.ProcessConfig.Tty,
		WorkingDirectory: c.WorkingDir,
		ConsoleSize:      c.ProcessConfig.ConsoleSize,
	}

	// Configure the environment for the process
	createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)

	// This should get caught earlier, but just in case - validate that we
	// have something to run
	if c.ProcessConfig.Entrypoint == "" {
		err = errors.New("No entrypoint specified")
		logrus.Error(err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Build the command line of the process
	createProcessParms.CommandLine = c.ProcessConfig.Entrypoint
	for _, arg := range c.ProcessConfig.Arguments {
		logrus.Debugln("appending ", arg)
		createProcessParms.CommandLine += " " + syscall.EscapeArg(arg)
	}
	logrus.Debugf("CommandLine: %s", createProcessParms.CommandLine)

	// Start the command running in the container.
	pid, stdin, stdout, stderr, _, err := hcsshim.CreateProcessInComputeSystem(c.ID, pipes.Stdin != nil, true, !c.ProcessConfig.Tty, createProcessParms)
	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Now that the process has been launched, begin copying data to and from
	// the named pipes for the std handles.
	setupPipes(stdin, stdout, stderr, pipes)

	//Save the PID as we'll need this in Kill()
	logrus.Debugf("PID %d", pid)
	c.ContainerPid = int(pid)

	if c.ProcessConfig.Tty {
		term = NewTtyConsole(c.ID, pid)
	} else {
		term = NewStdConsole()
	}
	c.ProcessConfig.Terminal = term

	// Maintain our list of active containers. We'll need this later for exec
	// and other commands.
	d.Lock()
	d.activeContainers[c.ID] = &activeContainer{
		command: c,
	}
	d.Unlock()

	if hooks.Start != nil {
		// A closed channel for OOM is returned here as it will be
		// non-blocking and return the correct result when read.
		chOOM := make(chan struct{})
		close(chOOM)
		hooks.Start(&c.ProcessConfig, int(pid), chOOM)
	}

	var (
		exitCode int32
		errno    uint32
	)
	exitCode, errno, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid, hcsshim.TimeoutInfinite)
	if err != nil {
		if errno != hcsshim.Win32PipeHasBeenEnded {
			logrus.Warnf("WaitForProcessInComputeSystem failed (container may have been killed): %s", err)
		}
		// Do NOT return err here as the container would have
		// started, otherwise docker will deadlock. It's perfectly legitimate
		// for WaitForProcessInComputeSystem to fail in situations such
		// as the container being killed on another thread.
		return execdriver.ExitStatus{ExitCode: hcsshim.WaitErrExecFailed}, nil
	}

	logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
	return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}
func (ctr *container) start() error {
	var err error

	// Start the container.  If this is a servicing container, this call will block
	// until the container is done with the servicing execution.
	logrus.Debugln("Starting container ", ctr.containerID)
	if err = hcsshim.StartComputeSystem(ctr.containerID); err != nil {
		logrus.Errorf("Failed to start compute system: %s", err)
		return err
	}

	for _, option := range ctr.options {
		if s, ok := option.(*ServicingOption); ok && s.IsServicing {
			// Since the servicing operation is complete when StartCommputeSystem returns without error,
			// we can shutdown (which triggers merge) and exit early.
			const shutdownTimeout = 5 * 60 * 1000  // 4 minutes
			const terminateTimeout = 1 * 60 * 1000 // 1 minute
			if err := hcsshim.ShutdownComputeSystem(ctr.containerID, shutdownTimeout, ""); err != nil {
				logrus.Errorf("Failed during cleanup of servicing container: %s", err)
				// Terminate the container, ignoring errors.
				if err2 := hcsshim.TerminateComputeSystem(ctr.containerID, terminateTimeout, ""); err2 != nil {
					logrus.Errorf("Failed to terminate container %s after shutdown failure: %q", ctr.containerID, err2)
				}
				return err
			}
			return nil
		}
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   ctr.ociSpec.Process.Terminal,
		WorkingDirectory: ctr.ociSpec.Process.Cwd,
		ConsoleSize:      ctr.ociSpec.Process.InitialConsoleSize,
	}

	// Configure the environment for the process
	createProcessParms.Environment = setupEnvironmentVariables(ctr.ociSpec.Process.Env)
	createProcessParms.CommandLine = strings.Join(ctr.ociSpec.Process.Args, " ")

	iopipe := &IOPipe{Terminal: ctr.ociSpec.Process.Terminal}

	// Start the command running in the container. Note we always tell HCS to
	// create stdout as it's required regardless of '-i' or '-t' options, so that
	// docker can always grab the output through logs. We also tell HCS to always
	// create stdin, even if it's not used - it will be closed shortly. Stderr
	// is only created if it we're not -t.
	var pid uint32
	var stdout, stderr io.ReadCloser
	pid, iopipe.Stdin, stdout, stderr, err = hcsshim.CreateProcessInComputeSystem(
		ctr.containerID,
		true,
		true,
		!ctr.ociSpec.Process.Terminal,
		createProcessParms)
	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)

		// Explicitly terminate the compute system here.
		if err2 := hcsshim.TerminateComputeSystem(ctr.containerID, hcsshim.TimeoutInfinite, "CreateProcessInComputeSystem failed"); err2 != nil {
			// Ignore this error, there's not a lot we can do except log it
			logrus.Warnf("Failed to TerminateComputeSystem after a failed CreateProcessInComputeSystem. Ignoring this.", err2)
		} else {
			logrus.Debugln("Cleaned up after failed CreateProcessInComputeSystem by calling TerminateComputeSystem")
		}
		return err
	}
	ctr.startedAt = time.Now()

	// TEMP: Work around Windows BS/DEL behavior.
	iopipe.Stdin = fixStdinBackspaceBehavior(iopipe.Stdin, ctr.ociSpec.Process.Terminal)

	// Convert io.ReadClosers to io.Readers
	if stdout != nil {
		iopipe.Stdout = openReaderFromPipe(stdout)
	}
	if stderr != nil {
		iopipe.Stderr = openReaderFromPipe(stderr)
	}

	// Save the PID
	logrus.Debugf("Process started - PID %d", pid)
	ctr.systemPid = uint32(pid)

	// Spin up a go routine waiting for exit to handle cleanup
	go ctr.waitExit(pid, InitFriendlyName, true)

	ctr.client.appendContainer(ctr)

	if err := ctr.client.backend.AttachStreams(ctr.containerID, *iopipe); err != nil {
		// OK to return the error here, as waitExit will handle tear-down in HCS
		return err
	}

	// Tell the docker engine that the container has started.
	si := StateInfo{
		CommonStateInfo: CommonStateInfo{
			State: StateStart,
			Pid:   ctr.systemPid, // Not sure this is needed? Double-check monitor.go in daemon BUGBUG @jhowardmsft
		}}
	return ctr.client.backend.StateChanged(ctr.containerID, si)

}
示例#9
0
func (d *driver) Run(c *execdriver.Command, pipes *execdriver.Pipes, startCallback execdriver.StartCallback) (execdriver.ExitStatus, error) {

	var (
		term                           execdriver.Terminal
		err                            error
		inListen, outListen, errListen *npipe.PipeListener
	)

	// Make sure the client isn't asking for options which aren't supported
	err = checkSupportedOptions(c)
	if err != nil {
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	cu := &containerInit{
		SystemType:              "Container",
		Name:                    c.ID,
		IsDummy:                 dummyMode,
		VolumePath:              c.Rootfs,
		IgnoreFlushesDuringBoot: c.FirstStart,
		LayerFolderPath:         c.LayerFolder,
	}

	for i := 0; i < len(c.LayerPaths); i++ {
		cu.Layers = append(cu.Layers, layer{
			Id:   hcsshim.NewGUID(c.LayerPaths[i]).ToString(),
			Path: c.LayerPaths[i],
		})
	}

	if c.Network.Interface != nil {
		dev := device{
			DeviceType: "Network",
			Connection: &networkConnection{
				NetworkName: c.Network.Interface.Bridge,
				EnableNat:   false,
			},
		}

		if c.Network.Interface.MacAddress != "" {
			windowsStyleMAC := strings.Replace(
				c.Network.Interface.MacAddress, ":", "-", -1)
			dev.Settings = networkSettings{
				MacAddress: windowsStyleMAC,
			}
		}

		logrus.Debugf("Virtual switch '%s', mac='%s'", c.Network.Interface.Bridge, c.Network.Interface.MacAddress)

		cu.Devices = append(cu.Devices, dev)
	} else {
		logrus.Debugln("No network interface")
	}

	configurationb, err := json.Marshal(cu)
	if err != nil {
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	configuration := string(configurationb)

	err = hcsshim.CreateComputeSystem(c.ID, configuration)
	if err != nil {
		logrus.Debugln("Failed to create temporary container ", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Start the container
	logrus.Debugln("Starting container ", c.ID)
	err = hcsshim.StartComputeSystem(c.ID)
	if err != nil {
		logrus.Errorf("Failed to start compute system: %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}
	defer func() {
		// Stop the container

		if terminateMode {
			logrus.Debugf("Terminating container %s", c.ID)
			if err := hcsshim.TerminateComputeSystem(c.ID); err != nil {
				// IMPORTANT: Don't fail if fails to change state. It could already
				// have been stopped through kill().
				// Otherwise, the docker daemon will hang in job wait()
				logrus.Warnf("Ignoring error from TerminateComputeSystem %s", err)
			}
		} else {
			logrus.Debugf("Shutting down container %s", c.ID)
			if err := hcsshim.ShutdownComputeSystem(c.ID); err != nil {
				// IMPORTANT: Don't fail if fails to change state. It could already
				// have been stopped through kill().
				// Otherwise, the docker daemon will hang in job wait()
				logrus.Warnf("Ignoring error from ShutdownComputeSystem %s", err)
			}
		}
	}()

	// We use a different pipe name between real and dummy mode in the HCS
	var serverPipeFormat, clientPipeFormat string
	if dummyMode {
		clientPipeFormat = `\\.\pipe\docker-run-%[1]s-%[2]s`
		serverPipeFormat = clientPipeFormat
	} else {
		clientPipeFormat = `\\.\pipe\docker-run-%[2]s`
		serverPipeFormat = `\\.\Containers\%[1]s\Device\NamedPipe\docker-run-%[2]s`
	}

	createProcessParms := hcsshim.CreateProcessParams{
		EmulateConsole:   c.ProcessConfig.Tty,
		WorkingDirectory: c.WorkingDir,
		ConsoleSize:      c.ProcessConfig.ConsoleSize,
	}

	// Configure the environment for the process
	createProcessParms.Environment = setupEnvironmentVariables(c.ProcessConfig.Env)

	// Connect stdin
	if pipes.Stdin != nil {
		stdInPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdin")
		createProcessParms.StdInPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdin")

		// Listen on the named pipe
		inListen, err = npipe.Listen(stdInPipe)
		if err != nil {
			logrus.Errorf("stdin failed to listen on %s err=%s", stdInPipe, err)
			return execdriver.ExitStatus{ExitCode: -1}, err
		}
		defer inListen.Close()

		// Launch a goroutine to do the accept. We do this so that we can
		// cause an otherwise blocking goroutine to gracefully close when
		// the caller (us) closes the listener
		go stdinAccept(inListen, stdInPipe, pipes.Stdin)
	}

	// Connect stdout
	stdOutPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stdout")
	createProcessParms.StdOutPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stdout")

	outListen, err = npipe.Listen(stdOutPipe)
	if err != nil {
		logrus.Errorf("stdout failed to listen on %s err=%s", stdOutPipe, err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}
	defer outListen.Close()
	go stdouterrAccept(outListen, stdOutPipe, pipes.Stdout)

	// No stderr on TTY.
	if !c.ProcessConfig.Tty {
		// Connect stderr
		stdErrPipe := fmt.Sprintf(serverPipeFormat, c.ID, "stderr")
		createProcessParms.StdErrPipe = fmt.Sprintf(clientPipeFormat, c.ID, "stderr")
		errListen, err = npipe.Listen(stdErrPipe)
		if err != nil {
			logrus.Errorf("stderr failed to listen on %s err=%s", stdErrPipe, err)
			return execdriver.ExitStatus{ExitCode: -1}, err
		}
		defer errListen.Close()
		go stdouterrAccept(errListen, stdErrPipe, pipes.Stderr)
	}

	// This should get caught earlier, but just in case - validate that we
	// have something to run
	if c.ProcessConfig.Entrypoint == "" {
		err = errors.New("No entrypoint specified")
		logrus.Error(err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	// Build the command line of the process
	createProcessParms.CommandLine = c.ProcessConfig.Entrypoint
	for _, arg := range c.ProcessConfig.Arguments {
		logrus.Debugln("appending ", arg)
		createProcessParms.CommandLine += " " + arg
	}
	logrus.Debugf("CommandLine: %s", createProcessParms.CommandLine)

	// Start the command running in the container.
	var pid uint32
	pid, err = hcsshim.CreateProcessInComputeSystem(c.ID, createProcessParms)

	if err != nil {
		logrus.Errorf("CreateProcessInComputeSystem() failed %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	//Save the PID as we'll need this in Kill()
	logrus.Debugf("PID %d", pid)
	c.ContainerPid = int(pid)

	if c.ProcessConfig.Tty {
		term = NewTtyConsole(c.ID, pid)
	} else {
		term = NewStdConsole()
	}
	c.ProcessConfig.Terminal = term

	// Maintain our list of active containers. We'll need this later for exec
	// and other commands.
	d.Lock()
	d.activeContainers[c.ID] = &activeContainer{
		command: c,
	}
	d.Unlock()

	// Invoke the start callback
	if startCallback != nil {
		startCallback(&c.ProcessConfig, int(pid))
	}

	var exitCode int32
	exitCode, err = hcsshim.WaitForProcessInComputeSystem(c.ID, pid)
	if err != nil {
		logrus.Errorf("Failed to WaitForProcessInComputeSystem %s", err)
		return execdriver.ExitStatus{ExitCode: -1}, err
	}

	logrus.Debugf("Exiting Run() exitCode %d id=%s", exitCode, c.ID)
	return execdriver.ExitStatus{ExitCode: int(exitCode)}, nil
}