func (l *L1L2BatchOrca) Prepend(req common.SetRequest) error {
//log.Println("prepend", string(req.Key))
metrics.IncCounter(MetricCmdPrependL2)
start := timer.Now()
err := l.l2.Prepend(req)
metrics.ObserveHist(HistPrependL2, timer.Since(start))
if err != nil {
// Prepending in L2 did not succeed. Don't try in L1 since this means L2
// may not have succeeded.
if err == common.ErrItemNotStored {
metrics.IncCounter(MetricCmdPrependNotStoredL2)
metrics.IncCounter(MetricCmdPrependNotStored)
return err
}
metrics.IncCounter(MetricCmdPrependErrorsL2)
metrics.IncCounter(MetricCmdPrependErrors)
return err
}
// L2 succeeded, so it's time to try L1. If L1 fails with a not found, we're
// still good since L1 is allowed to not have the data when L2 does. If
// there's an error, we need to fail because we're not in an unknown state
// where L1 possibly doesn't have the Prepend when L2 does. We don't recover
// from this but instead fail the request and let the client retry.
metrics.IncCounter(MetricCmdPrependL1)
start = timer.Now()
err = l.l1.Prepend(req)
metrics.ObserveHist(HistPrependL1, timer.Since(start))
if err != nil {
// Not stored in L1 is still fine. There's a possibility that a
// concurrent delete happened or that the data has just been pushed out
// of L1. Prepend will not bring data back into L1 as it's not necessarily
// going to be immediately read.
if err == common.ErrItemNotStored || err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdPrependNotStoredL1)
metrics.IncCounter(MetricCmdPrependStored)
return l.res.Prepend(req.Opaque, req.Quiet)
}
metrics.IncCounter(MetricCmdPrependErrorsL1)
metrics.IncCounter(MetricCmdPrependErrors)
return err
}
metrics.IncCounter(MetricCmdPrependStoredL1)
metrics.IncCounter(MetricCmdPrependStored)
return l.res.Prepend(req.Opaque, req.Quiet)
}
func (l *L1L2BatchOrca) Add(req common.SetRequest) error {
//log.Println("add", string(req.Key))
// Add in L2 first, since it has the larger state
metrics.IncCounter(MetricCmdAddL2)
start := timer.Now()
err := l.l2.Add(req)
metrics.ObserveHist(HistAddL2, timer.Since(start))
if err != nil {
// A key already existing is not an error per se, it's a part of the
// functionality of the add command to respond with a "not stored" in
// the form of a ErrKeyExists. Hence no error metrics.
if err == common.ErrKeyExists {
metrics.IncCounter(MetricCmdAddNotStoredL2)
metrics.IncCounter(MetricCmdAddNotStored)
return err
}
// otherwise we have a real error on our hands
metrics.IncCounter(MetricCmdAddErrorsL2)
metrics.IncCounter(MetricCmdAddErrors)
return err
}
metrics.IncCounter(MetricCmdAddStoredL2)
// Replace the entry in L1.
metrics.IncCounter(MetricCmdAddReplaceL1)
start = timer.Now()
err = l.l1.Replace(req)
metrics.ObserveHist(HistReplaceL1, timer.Since(start))
if err != nil {
if err == common.ErrKeyNotFound {
// For a replace not stored in L1, there's no problem.
// There is no hot data to replace
metrics.IncCounter(MetricCmdAddReplaceNotStoredL1)
} else {
metrics.IncCounter(MetricCmdAddReplaceErrorsL1)
metrics.IncCounter(MetricCmdAddErrors)
return err
}
} else {
metrics.IncCounter(MetricCmdAddReplaceStoredL1)
}
metrics.IncCounter(MetricCmdAddStored)
return l.res.Add(req.Opaque, req.Quiet)
}
func (l *L1L2Orca) Set(req common.SetRequest) error {
//log.Println("set", string(req.Key))
// Try L2 first
metrics.IncCounter(MetricCmdSetL2)
start := timer.Now()
err := l.l2.Set(req)
metrics.ObserveHist(HistSetL2, timer.Since(start))
// If we fail to set in L2, don't set in L1
if err != nil {
metrics.IncCounter(MetricCmdSetErrorsL2)
metrics.IncCounter(MetricCmdSetErrors)
return err
}
metrics.IncCounter(MetricCmdSetSuccessL2)
// Now set in L1. If L1 fails, we log the error and fail the request.
// If a user was writing a new piece of information, the error would be OK,
// since the next GET would be able to put the L2 information back into L1.
// In the case that the user was overwriting information, a failed set in L1
// and successful one in L2 would leave us inconsistent. If the response was
// positive in this situation, it would look like the server successfully
// processed the request but didn't store the information. Clients will
// retry failed writes. In this case L2 will get two writes for the same key
// but this is better because it is more correct overall, though less
// efficient. Note there are no retries at this level.
//
// It should be noted that errors on a straight set are nearly always fatal
// for the connection. It's likely that if this branch is taken that the
// connections to everyone will be severed (for this one client connection)
// and that the client will reconnect to try again.
metrics.IncCounter(MetricCmdSetL1)
start = timer.Now()
err = l.l1.Set(req)
metrics.ObserveHist(HistSetL1, timer.Since(start))
if err != nil {
metrics.IncCounter(MetricCmdSetErrorsL1)
metrics.IncCounter(MetricCmdSetErrors)
return err
}
metrics.IncCounter(MetricCmdSetSuccessL1)
metrics.IncCounter(MetricCmdSetSuccess)
return l.res.Set(req.Opaque, req.Quiet)
}
func TestMonoTimeIsNeverTheSame(t *testing.T) {
prev := timer.Now()
same := 0
for i := 0; i < 100000000; i++ {
now := timer.Now()
if now == prev {
same++
}
prev = now
}
t.Logf("Times were the same %d times", same)
}
func (l *L1OnlyOrca) Touch(req common.TouchRequest) error {
//log.Println("touch", string(req.Key))
metrics.IncCounter(MetricCmdTouchL1)
start := timer.Now()
err := l.l1.Touch(req)
metrics.ObserveHist(HistTouchL1, timer.Since(start))
if err == nil {
metrics.IncCounter(MetricCmdTouchHitsL1)
metrics.IncCounter(MetricCmdTouchHits)
l.res.Touch(req.Opaque)
} else if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdTouchMissesL1)
metrics.IncCounter(MetricCmdTouchMisses)
} else {
metrics.IncCounter(MetricCmdTouchMissesL1)
metrics.IncCounter(MetricCmdTouchMisses)
}
return err
}
func (l *L1OnlyOrca) Gat(req common.GATRequest) error {
//log.Println("gat", string(req.Key))
metrics.IncCounter(MetricCmdGatL1)
start := timer.Now()
res, err := l.l1.GAT(req)
metrics.ObserveHist(HistGatL1, timer.Since(start))
if err == nil {
if res.Miss {
metrics.IncCounter(MetricCmdGatMissesL1)
// TODO: Account for L2
metrics.IncCounter(MetricCmdGatMisses)
} else {
metrics.IncCounter(MetricCmdGatHits)
metrics.IncCounter(MetricCmdGatHitsL1)
}
l.res.GAT(res)
// There is no GetEnd call required here since this is only ever
// done in the binary protocol, where there's no END marker.
// Calling l.res.GetEnd was a no-op here and is just useless.
//l.res.GetEnd(0, false)
} else {
metrics.IncCounter(MetricCmdGatErrors)
metrics.IncCounter(MetricCmdGatErrorsL1)
}
return err
}
func main() {
var prot common.Prot
if f.Binary {
prot = binprot.BinProt{}
} else {
prot = textprot.TextProt{}
}
wg := new(sync.WaitGroup)
wg.Add(f.NumWorkers)
extraOps := f.NumOps % f.NumWorkers
opsPerWorker := f.NumOps / f.NumWorkers
start := timer.Now()
// spawn worker goroutines
for i := 0; i < f.NumWorkers; i++ {
numops := opsPerWorker
if i == 0 {
numops += extraOps
}
go worker(numops, prot, wg)
}
wg.Wait()
log.Println("Total comm time:", timer.Since(start))
}
func (l *L1OnlyOrca) Add(req common.SetRequest) error {
//log.Println("add", string(req.Key))
metrics.IncCounter(MetricCmdAddL1)
start := timer.Now()
err := l.l1.Add(req)
metrics.ObserveHist(HistAddL1, timer.Since(start))
if err == nil {
metrics.IncCounter(MetricCmdAddStoredL1)
metrics.IncCounter(MetricCmdAddStored)
err = l.res.Add(req.Opaque, req.Quiet)
} else if err == common.ErrKeyExists {
metrics.IncCounter(MetricCmdAddNotStoredL1)
metrics.IncCounter(MetricCmdAddNotStored)
} else {
metrics.IncCounter(MetricCmdAddErrorsL1)
metrics.IncCounter(MetricCmdAddErrors)
}
return err
}
func (l *L1OnlyOrca) Replace(req common.SetRequest) error {
//log.Println("replace", string(req.Key))
metrics.IncCounter(MetricCmdReplaceL1)
start := timer.Now()
err := l.l1.Replace(req)
metrics.ObserveHist(HistReplaceL1, timer.Since(start))
if err == nil {
metrics.IncCounter(MetricCmdReplaceStoredL1)
metrics.IncCounter(MetricCmdReplaceStored)
err = l.res.Replace(req.Opaque, req.Quiet)
} else if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdReplaceNotStoredL1)
metrics.IncCounter(MetricCmdReplaceNotStored)
} else {
metrics.IncCounter(MetricCmdReplaceErrorsL1)
metrics.IncCounter(MetricCmdReplaceErrors)
}
return err
}
func (l *L1OnlyOrca) Delete(req common.DeleteRequest) error {
//log.Println("delete", string(req.Key))
metrics.IncCounter(MetricCmdDeleteL1)
start := timer.Now()
err := l.l1.Delete(req)
metrics.ObserveHist(HistDeleteL1, timer.Since(start))
if err == nil {
metrics.IncCounter(MetricCmdDeleteHits)
metrics.IncCounter(MetricCmdDeleteHitsL1)
l.res.Delete(req.Opaque)
} else if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdDeleteMissesL1)
metrics.IncCounter(MetricCmdDeleteMisses)
} else {
metrics.IncCounter(MetricCmdDeleteErrorsL1)
metrics.IncCounter(MetricCmdDeleteErrors)
}
return err
}
func TestRegularIntervalsTimer(t *testing.T) {
for i := 0; i < 100; i++ {
start := timer.Now()
time.Sleep(10 * time.Millisecond)
dur := timer.Since(start)
t.Logf("10 ms sleep took %d nanoseconds with timer", dur)
}
}
func (l *L1L2BatchOrca) Set(req common.SetRequest) error {
//log.Println("set", string(req.Key))
// Try L2 first
metrics.IncCounter(MetricCmdSetL2)
start := timer.Now()
err := l.l2.Set(req)
metrics.ObserveHist(HistSetL2, timer.Since(start))
// If we fail to set in L2, don't do anything in L1
if err != nil {
metrics.IncCounter(MetricCmdSetErrorsL2)
metrics.IncCounter(MetricCmdSetErrors)
return err
}
metrics.IncCounter(MetricCmdSetSuccessL2)
// Replace the entry in L1.
metrics.IncCounter(MetricCmdSetReplaceL1)
start = timer.Now()
err = l.l1.Replace(req)
metrics.ObserveHist(HistReplaceL1, timer.Since(start))
if err != nil {
if err == common.ErrKeyNotFound {
// For a replace not stored in L1, there's no problem.
// There is no hot data to replace
metrics.IncCounter(MetricCmdSetReplaceNotStoredL1)
} else {
metrics.IncCounter(MetricCmdSetReplaceErrorsL1)
metrics.IncCounter(MetricCmdSetErrors)
return err
}
} else {
metrics.IncCounter(MetricCmdSetReplaceStoredL1)
}
metrics.IncCounter(MetricCmdSetSuccess)
return l.res.Set(req.Opaque, req.Quiet)
}
func communicator(prot common.Prot, conn net.Conn, tasks <-chan *common.Task, metrics chan<- metric, comms *sync.WaitGroup) {
r := rand.New(rand.NewSource(common.RandSeed()))
rw := bufio.NewReadWriter(bufio.NewReader(conn), bufio.NewWriter(conn))
for item := range tasks {
var err error
start := timer.Now()
switch item.Cmd {
case common.Set:
err = prot.Set(rw, item.Key, item.Value)
case common.Add:
err = prot.Add(rw, item.Key, item.Value)
case common.Replace:
err = prot.Replace(rw, item.Key, item.Value)
case common.Append:
err = prot.Append(rw, item.Key, item.Value)
case common.Prepend:
err = prot.Prepend(rw, item.Key, item.Value)
case common.Get:
_, err = prot.Get(rw, item.Key)
case common.Gat:
_, err = prot.GAT(rw, item.Key)
case common.Bget:
bk := batchkeys(r, item.Key)
_, err = prot.BatchGet(rw, bk)
bkpool.Put(bk)
case common.Delete:
err = prot.Delete(rw, item.Key)
case common.Touch:
err = prot.Touch(rw, item.Key)
}
if err != nil {
// don't print get misses, adds not stored, and replaces not stored
if !isMiss(err) {
fmt.Printf("Error performing operation %s on key %s: %s\n", item.Cmd, item.Key, err.Error())
}
// if the socket was closed, stop. Otherwise keep on hammering.
if err == io.EOF {
break
}
}
m := metricPool.Get().(metric)
m.d = timer.Since(start)
m.op = item.Cmd
m.miss = isMiss(err)
metrics <- m
taskPool.Put(item)
}
conn.Close()
comms.Done()
}
func TestMonotonicAndWallTimerDifference(t *testing.T) {
start := time.Now().UnixNano()
monostart := timer.Now()
for i := 0; i < 10; i++ {
diff := time.Now().UnixNano() - start
monodiff := timer.Since(monostart)
t.Logf("Wall: %d", diff)
t.Logf("Mono: %d", monodiff)
time.Sleep(1 * time.Second)
}
}
func (l *L1OnlyOrca) Set(req common.SetRequest) error {
//log.Println("set", string(req.Key))
metrics.IncCounter(MetricCmdSetL1)
start := timer.Now()
err := l.l1.Set(req)
metrics.ObserveHist(HistSetL1, timer.Since(start))
if err == nil {
metrics.IncCounter(MetricCmdSetSuccessL1)
metrics.IncCounter(MetricCmdSetSuccess)
err = l.res.Set(req.Opaque, req.Quiet)
} else {
metrics.IncCounter(MetricCmdSetErrorsL1)
metrics.IncCounter(MetricCmdSetErrors)
}
return err
}
func BenchmarkTimerNow(b *testing.B) {
for i := 0; i < b.N; i++ {
_ = timer.Now()
}
}
func (l *L1L2Orca) Touch(req common.TouchRequest) error {
//log.Println("touch", string(req.Key))
// Try L2 first
metrics.IncCounter(MetricCmdTouchL2)
start := timer.Now()
err := l.l2.Touch(req)
metrics.ObserveHist(HistTouchL2, timer.Since(start))
if err != nil {
// On a touch miss in L2 don't bother touch in L1. The data should be
// TTL'd out within a second. This is yet another place where it's
// possible to be inconsistent, but only for a short time. Any
// concurrent requests will see the same behavior as this one. If the
// touch misses here, any other request will see the same view.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdTouchMissesL2)
metrics.IncCounter(MetricCmdTouchMisses)
return err
}
// If we fail to touch in L2, don't touch in L1. If the touch succeeded
// but for some reason the communication failed, then this is still OK
// since L1 can TTL out while L2 still has the data. On the next get
// request the data would still be retrievable, albeit more slowly.
metrics.IncCounter(MetricCmdTouchErrorsL2)
metrics.IncCounter(MetricCmdTouchErrors)
return err
}
metrics.IncCounter(MetricCmdTouchHitsL2)
// In the case of concurrent touches with different values, it's possible
// that the touches for L1 and L2 interleave and produce an inconsistent
// state. The L2 could be touched long, then L2 and L1 touched short on
// another request, then L1 touched long. In this case the data in L1 would
// outlive L2. This situation is uncommon and is therefore discounted.
metrics.IncCounter(MetricCmdTouchL1)
start = timer.Now()
err = l.l1.Touch(req)
metrics.ObserveHist(HistTouchL1, timer.Since(start))
if err != nil {
// Touch misses in L1 after a hit in L2 are nto a big deal. The
// touch operation here explicitly does *not* act as a pre-warm putting
// data into L1. A miss here after a hit is the same as a hit.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdTouchMissesL1)
// Note that we increment the overall hits here (not misses) on
// purpose because L2 hit.
metrics.IncCounter(MetricCmdTouchHits)
return l.res.Touch(req.Opaque)
}
metrics.IncCounter(MetricCmdTouchErrorsL1)
metrics.IncCounter(MetricCmdTouchErrors)
return err
}
metrics.IncCounter(MetricCmdTouchHitsL1)
metrics.IncCounter(MetricCmdTouchHits)
return l.res.Touch(req.Opaque)
}
func (l *L1L2Orca) Get(req common.GetRequest) error {
metrics.IncCounterBy(MetricCmdGetKeys, uint64(len(req.Keys)))
//debugString := "get"
//for _, k := range req.Keys {
// debugString += " "
// debugString += string(k)
//}
//println(debugString)
metrics.IncCounter(MetricCmdGetL1)
metrics.IncCounterBy(MetricCmdGetKeysL1, uint64(len(req.Keys)))
start := timer.Now()
resChan, errChan := l.l1.Get(req)
var err error
//var lastres common.GetResponse
var l2keys [][]byte
var l2opaques []uint32
var l2quiets []bool
// Read all the responses back from L1.
// The contract is that the resChan will have GetResponse's for get hits and misses,
// and the errChan will have any other errors, such as an out of memory error from
// memcached. If any receive happens from errChan, there will be no more responses
// from resChan.
for {
select {
case res, ok := <-resChan:
if !ok {
resChan = nil
} else {
if res.Miss {
metrics.IncCounter(MetricCmdGetMissesL1)
l2keys = append(l2keys, res.Key)
l2opaques = append(l2opaques, res.Opaque)
l2quiets = append(l2quiets, res.Quiet)
} else {
metrics.IncCounter(MetricCmdGetHits)
metrics.IncCounter(MetricCmdGetHitsL1)
l.res.Get(res)
}
}
case getErr, ok := <-errChan:
if !ok {
errChan = nil
} else {
metrics.IncCounter(MetricCmdGetErrors)
metrics.IncCounter(MetricCmdGetErrorsL1)
err = getErr
}
}
if resChan == nil && errChan == nil {
break
}
}
// finish up metrics for overall L1 (batch) get operation
metrics.ObserveHist(HistGetL1, timer.Since(start))
// leave early on all hits
if len(l2keys) == 0 {
if err != nil {
return err
}
return l.res.GetEnd(req.NoopOpaque, req.NoopEnd)
}
// Time for the same dance with L2
req = common.GetRequest{
Keys: l2keys,
NoopEnd: req.NoopEnd,
NoopOpaque: req.NoopOpaque,
Opaques: l2opaques,
Quiet: l2quiets,
}
metrics.IncCounter(MetricCmdGetEL2)
metrics.IncCounterBy(MetricCmdGetEKeysL2, uint64(len(l2keys)))
start = timer.Now()
resChanE, errChan := l.l2.GetE(req)
for {
select {
case res, ok := <-resChanE:
if !ok {
resChanE = nil
} else {
if res.Miss {
metrics.IncCounter(MetricCmdGetEMissesL2)
// Missing L2 means a true miss
metrics.IncCounter(MetricCmdGetMisses)
} else {
metrics.IncCounter(MetricCmdGetEHitsL2)
//set in l1
setreq := common.SetRequest{
Key: res.Key,
Flags: res.Flags,
Exptime: res.Exptime,
Data: res.Data,
}
metrics.IncCounter(MetricCmdGetSetL1)
start2 := timer.Now()
err = l.l1.Set(setreq)
metrics.ObserveHist(HistSetL1, timer.Since(start2))
if err != nil {
metrics.IncCounter(MetricCmdGetSetErrorsL1)
return err
}
metrics.IncCounter(MetricCmdGetSetSucessL1)
// overall operation is considered a hit
metrics.IncCounter(MetricCmdGetHits)
}
getres := common.GetResponse{
Key: res.Key,
Flags: res.Flags,
Data: res.Data,
Miss: res.Miss,
Opaque: res.Opaque,
Quiet: res.Quiet,
}
l.res.Get(getres)
}
case getErr, ok := <-errChan:
if !ok {
errChan = nil
} else {
metrics.IncCounter(MetricCmdGetErrors)
metrics.IncCounter(MetricCmdGetEErrorsL2)
err = getErr
}
}
if resChanE == nil && errChan == nil {
break
}
}
// finish up metrics for overall L2 (batch) get operation
metrics.ObserveHist(HistGetL2, timer.Since(start))
if err == nil {
return l.res.GetEnd(req.NoopOpaque, req.NoopEnd)
}
return err
}
func (t TextParser) Parse() (common.Request, common.RequestType, uint64, error) {
data, err := t.reader.ReadString('\n')
start := timer.Now()
metrics.IncCounterBy(common.MetricBytesReadRemote, uint64(len(data)))
if err != nil {
if err == io.EOF {
log.Println("Connection closed")
} else {
log.Printf("Error while reading text command line: %s\n", err.Error())
}
return nil, common.RequestUnknown, start, err
}
clParts := strings.Split(strings.TrimSpace(data), " ")
switch clParts[0] {
case "set":
return setRequest(t.reader, clParts, common.RequestSet, start)
case "add":
return setRequest(t.reader, clParts, common.RequestAdd, start)
case "replace":
return setRequest(t.reader, clParts, common.RequestReplace, start)
case "append":
return setRequest(t.reader, clParts, common.RequestAppend, start)
case "prepend":
return setRequest(t.reader, clParts, common.RequestPrepend, start)
case "get":
if len(clParts) < 2 {
return nil, common.RequestGet, start, common.ErrBadRequest
}
var keys [][]byte
for _, key := range clParts[1:] {
keys = append(keys, []byte(key))
}
opaques := make([]uint32, len(keys))
quiet := make([]bool, len(keys))
return common.GetRequest{
Keys: keys,
Opaques: opaques,
Quiet: quiet,
NoopEnd: false,
}, common.RequestGet, start, nil
case "delete":
if len(clParts) != 2 {
return nil, common.RequestDelete, start, common.ErrBadRequest
}
return common.DeleteRequest{
Key: []byte(clParts[1]),
Opaque: uint32(0),
}, common.RequestDelete, start, nil
// TODO: Error handling for invalid cmd line
case "touch":
if len(clParts) != 3 {
return nil, common.RequestTouch, start, common.ErrBadRequest
}
key := []byte(clParts[1])
exptime, err := strconv.ParseUint(strings.TrimSpace(clParts[2]), 10, 32)
if err != nil {
log.Printf("Error parsing ttl for touch command: %s\n", err.Error())
return nil, common.RequestSet, start, common.ErrBadRequest
}
return common.TouchRequest{
Key: key,
Exptime: uint32(exptime),
Opaque: uint32(0),
}, common.RequestTouch, start, nil
case "noop":
if len(clParts) != 1 {
return nil, common.RequestNoop, start, common.ErrBadRequest
}
return common.NoopRequest{
Opaque: 0,
}, common.RequestNoop, start, nil
case "quit":
if len(clParts) != 1 {
return nil, common.RequestQuit, start, common.ErrBadRequest
}
return common.QuitRequest{
Opaque: 0,
Quiet: false,
}, common.RequestQuit, start, nil
case "version":
if len(clParts) != 1 {
return nil, common.RequestQuit, start, common.ErrBadRequest
}
return common.VersionRequest{
Opaque: 0,
}, common.RequestVersion, start, nil
default:
return nil, common.RequestUnknown, start, nil
}
}
func (b BinaryParser) Parse() (common.Request, common.RequestType, uint64, error) {
// read in the full header before any variable length fields
reqHeader, err := readRequestHeader(b.reader)
start := timer.Now()
defer reqHeadPool.Put(reqHeader)
if err != nil {
return nil, common.RequestUnknown, start, err
}
switch reqHeader.Opcode {
case OpcodeSet:
return setRequest(b.reader, reqHeader, common.RequestSet, false, start)
case OpcodeSetQ:
return setRequest(b.reader, reqHeader, common.RequestSet, true, start)
case OpcodeAdd:
return setRequest(b.reader, reqHeader, common.RequestAdd, false, start)
case OpcodeAddQ:
return setRequest(b.reader, reqHeader, common.RequestAdd, true, start)
case OpcodeReplace:
return setRequest(b.reader, reqHeader, common.RequestReplace, false, start)
case OpcodeReplaceQ:
return setRequest(b.reader, reqHeader, common.RequestReplace, true, start)
case OpcodeAppend:
return appendPrependRequest(b.reader, reqHeader, common.RequestAppend, false, start)
case OpcodeAppendQ:
return appendPrependRequest(b.reader, reqHeader, common.RequestAppend, true, start)
case OpcodePrepend:
return appendPrependRequest(b.reader, reqHeader, common.RequestPrepend, false, start)
case OpcodePrependQ:
return appendPrependRequest(b.reader, reqHeader, common.RequestPrepend, true, start)
case OpcodeGetQ:
req, err := readBatchGet(b.reader, reqHeader)
if err != nil {
log.Println("Error reading batch get")
return nil, common.RequestGet, start, err
}
return req, common.RequestGet, start, nil
case OpcodeGet:
// key
key, err := readString(b.reader, reqHeader.KeyLength)
if err != nil {
log.Println("Error reading key")
return nil, common.RequestGet, start, err
}
return common.GetRequest{
Keys: [][]byte{key},
Opaques: []uint32{reqHeader.OpaqueToken},
Quiet: []bool{false},
NoopEnd: false,
}, common.RequestGet, start, nil
// Expected only in applications behind Rend that reuse this parsing code
case OpcodeGetEQ:
req, err := readBatchGetE(b.reader, reqHeader)
if err != nil {
log.Println("Error reading batch get")
return nil, common.RequestGetE, start, err
}
return req, common.RequestGetE, start, nil
// Expected only in applications behind Rend that reuse this parsing code
case OpcodeGetE:
// key
key, err := readString(b.reader, reqHeader.KeyLength)
if err != nil {
log.Println("Error reading key")
return nil, common.RequestGetE, start, err
}
return common.GetRequest{
Keys: [][]byte{key},
Opaques: []uint32{reqHeader.OpaqueToken},
Quiet: []bool{false},
NoopEnd: false,
}, common.RequestGetE, start, nil
case OpcodeGat:
// exptime, key
exptime, err := readUInt32(b.reader)
if err != nil {
log.Println("Error reading exptime")
return nil, common.RequestGat, start, err
}
key, err := readString(b.reader, reqHeader.KeyLength)
if err != nil {
log.Println("Error reading key")
return nil, common.RequestGat, start, err
}
return common.GATRequest{
Key: key,
Exptime: exptime,
Opaque: reqHeader.OpaqueToken,
}, common.RequestGat, start, nil
case OpcodeDelete:
// key
key, err := readString(b.reader, reqHeader.KeyLength)
if err != nil {
log.Println("Error reading key")
return nil, common.RequestDelete, start, err
}
return common.DeleteRequest{
Key: key,
Opaque: reqHeader.OpaqueToken,
}, common.RequestDelete, start, nil
case OpcodeTouch:
// exptime, key
exptime, err := readUInt32(b.reader)
if err != nil {
log.Println("Error reading exptime")
return nil, common.RequestTouch, start, err
}
key, err := readString(b.reader, reqHeader.KeyLength)
if err != nil {
log.Println("Error reading key")
return nil, common.RequestTouch, start, err
}
return common.TouchRequest{
Key: key,
Exptime: exptime,
Opaque: reqHeader.OpaqueToken,
}, common.RequestTouch, start, nil
case OpcodeNoop:
return common.NoopRequest{
Opaque: reqHeader.OpaqueToken,
}, common.RequestNoop, start, nil
case OpcodeQuit:
return common.QuitRequest{
Opaque: reqHeader.OpaqueToken,
Quiet: false,
}, common.RequestQuit, start, nil
case OpcodeQuitQ:
return common.QuitRequest{
Opaque: reqHeader.OpaqueToken,
Quiet: true,
}, common.RequestQuit, start, nil
case OpcodeVersion:
return common.VersionRequest{
Opaque: reqHeader.OpaqueToken,
}, common.RequestVersion, start, nil
}
log.Printf("Error processing request: unknown command. Command: %X\nWhole request:%#v", reqHeader.Opcode, reqHeader)
return nil, common.RequestUnknown, start, common.ErrUnknownCmd
}
func (l *L1L2BatchOrca) Get(req common.GetRequest) error {
metrics.IncCounterBy(MetricCmdGetKeys, uint64(len(req.Keys)))
//debugString := "get"
//for _, k := range req.Keys {
// debugString += " "
// debugString += string(k)
//}
//println(debugString)
metrics.IncCounter(MetricCmdGetL1)
metrics.IncCounterBy(MetricCmdGetKeysL1, uint64(len(req.Keys)))
start := timer.Now()
resChan, errChan := l.l1.Get(req)
var err error
//var lastres common.GetResponse
var l2keys [][]byte
var l2opaques []uint32
var l2quiets []bool
// Read all the responses back from L1.
// The contract is that the resChan will have GetResponse's for get hits and misses,
// and the errChan will have any other errors, such as an out of memory error from
// memcached. If any receive happens from errChan, there will be no more responses
// from resChan.
for {
select {
case res, ok := <-resChan:
if !ok {
resChan = nil
} else {
if res.Miss {
metrics.IncCounter(MetricCmdGetMissesL1)
l2keys = append(l2keys, res.Key)
l2opaques = append(l2opaques, res.Opaque)
l2quiets = append(l2quiets, res.Quiet)
} else {
metrics.IncCounter(MetricCmdGetHits)
metrics.IncCounter(MetricCmdGetHitsL1)
l.res.Get(res)
}
}
case getErr, ok := <-errChan:
if !ok {
errChan = nil
} else {
metrics.IncCounter(MetricCmdGetErrors)
metrics.IncCounter(MetricCmdGetErrorsL1)
err = getErr
}
}
if resChan == nil && errChan == nil {
break
}
}
// record metrics before going to L2
metrics.ObserveHist(HistGetL1, timer.Since(start))
// leave early on all hits
if len(l2keys) == 0 {
if err != nil {
return err
}
return l.res.GetEnd(req.NoopOpaque, req.NoopEnd)
}
// Time for the same dance with L2
req = common.GetRequest{
Keys: l2keys,
NoopEnd: req.NoopEnd,
NoopOpaque: req.NoopOpaque,
Opaques: l2opaques,
Quiet: l2quiets,
}
metrics.IncCounter(MetricCmdGetL2)
metrics.IncCounterBy(MetricCmdGetKeysL2, uint64(len(l2keys)))
start = timer.Now()
resChan, errChan = l.l2.Get(req)
for {
select {
case res, ok := <-resChan:
if !ok {
resChan = nil
} else {
if res.Miss {
metrics.IncCounter(MetricCmdGetMissesL2)
// Missing L2 means a true miss
metrics.IncCounter(MetricCmdGetMisses)
} else {
metrics.IncCounter(MetricCmdGetHitsL2)
// For batch, don't set in l1. Typically batch users will read
// data once and not again, so setting in L1 will not be valuable.
// As well the data is typically just about to be replaced, making
// it doubly useless.
// overall operation is considered a hit
metrics.IncCounter(MetricCmdGetHits)
}
getres := common.GetResponse{
Key: res.Key,
Flags: res.Flags,
Data: res.Data,
Miss: res.Miss,
Opaque: res.Opaque,
Quiet: res.Quiet,
}
l.res.Get(getres)
}
case getErr, ok := <-errChan:
if !ok {
errChan = nil
} else {
metrics.IncCounter(MetricCmdGetErrors)
metrics.IncCounter(MetricCmdGetEErrorsL2)
err = getErr
}
}
if resChan == nil && errChan == nil {
break
}
}
metrics.ObserveHist(HistGetL2, timer.Since(start))
if err == nil {
return l.res.GetEnd(req.NoopOpaque, req.NoopEnd)
}
return err
}
func (l *L1L2Orca) Add(req common.SetRequest) error {
//log.Println("add", string(req.Key))
// Add in L2 first, since it has the larger state
metrics.IncCounter(MetricCmdAddL2)
start := timer.Now()
err := l.l2.Add(req)
metrics.ObserveHist(HistAddL2, timer.Since(start))
if err != nil {
// A key already existing is not an error per se, it's a part of the
// functionality of the add command to respond with a "not stored" in
// the form of a ErrKeyExists. Hence no error metrics.
if err == common.ErrKeyExists {
metrics.IncCounter(MetricCmdAddNotStoredL2)
metrics.IncCounter(MetricCmdAddNotStored)
return err
}
// otherwise we have a real error on our hands
metrics.IncCounter(MetricCmdAddErrorsL2)
metrics.IncCounter(MetricCmdAddErrors)
return err
}
metrics.IncCounter(MetricCmdAddStoredL2)
// Now on to L1. For L1 we also do an add operation to protect (partially)
// against concurrent operations modifying the same key. For concurrent sets
// that complete between the two stages, this will fail, leaving the cache
// consistent.
//
// There is a possibility in add that concurrent deletes will cause an
// inconsistent state. A concurrent delete could hit in L2 and miss in
// L1 between the two add operations, causing the L2 to be deleted and
// the L1 to have the data.
metrics.IncCounter(MetricCmdAddL1)
start = timer.Now()
err = l.l1.Add(req)
metrics.ObserveHist(HistAddL1, timer.Since(start))
if err != nil {
// This is kind of a problem. What has happened here is that the L2
// cache has successfully added the key but L1 did not. In this case
// we have to fail with a ErrKeyExists/Not Stored because the overall
// operation failed. If we assume a retry on the client, then it will
// likely fail again at the L2 step.
//
// One possible scenario here is that an add started and completed L2,
// then a set ran to full completion, overwriting the data in L2 then
// writing into L1, then the second step here ran and got an error.
if err == common.ErrKeyExists {
metrics.IncCounter(MetricCmdAddNotStoredL1)
metrics.IncCounter(MetricCmdAddNotStored)
return err
}
// otherwise we have a real error on our hands
metrics.IncCounter(MetricCmdAddErrorsL1)
metrics.IncCounter(MetricCmdAddErrors)
return err
}
metrics.IncCounter(MetricCmdAddStoredL1)
metrics.IncCounter(MetricCmdAddStored)
return l.res.Add(req.Opaque, req.Quiet)
}
func (l *L1L2BatchOrca) Append(req common.SetRequest) error {
//log.Println("append", string(req.Key))
// Ordering of append and prepend operations won't matter much unless
// there's a concurrent set that interleaves. In the case of a delete, the
// append will fail to work the second time (in L1) and the delete will not
// interfere. This append technically still succeeds if L1 doesn't work
// and L2 succeeded because data is allowed to be in L2 and not L1.
//
// With a set, we can get data appended (or prepended) only in L1 if a set
// completes both L2 and L1 between the L2 and L1 of this operation. This is
// an accepted risk which can be solved by the locking wrapper if it
// commonly happens.
metrics.IncCounter(MetricCmdAppendL2)
start := timer.Now()
err := l.l2.Append(req)
metrics.ObserveHist(HistAppendL2, timer.Since(start))
if err != nil {
// Appending in L2 did not succeed. Don't try in L1 since this means L2
// may not have succeeded.
if err == common.ErrItemNotStored {
metrics.IncCounter(MetricCmdAppendNotStoredL2)
metrics.IncCounter(MetricCmdAppendNotStored)
return err
}
metrics.IncCounter(MetricCmdAppendErrorsL2)
metrics.IncCounter(MetricCmdAppendErrors)
return err
}
// L2 succeeded, so it's time to try L1. If L1 fails with a not found, we're
// still good since L1 is allowed to not have the data when L2 does. If
// there's an error, we need to fail because we're not in an unknown state
// where L1 possibly doesn't have the append when L2 does. We don't recover
// from this but instead fail the request and let the client retry.
metrics.IncCounter(MetricCmdAppendL1)
start = timer.Now()
err = l.l1.Append(req)
metrics.ObserveHist(HistAppendL1, timer.Since(start))
if err != nil {
// Not stored in L1 is still fine. There's a possibility that a
// concurrent delete happened or that the data has just been pushed out
// of L1. Append will not bring data back into L1 as it's not necessarily
// going to be immediately read.
if err == common.ErrItemNotStored || err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdAppendNotStoredL1)
metrics.IncCounter(MetricCmdAppendStored)
return l.res.Append(req.Opaque, req.Quiet)
}
metrics.IncCounter(MetricCmdAppendErrorsL1)
metrics.IncCounter(MetricCmdAppendErrors)
return err
}
metrics.IncCounter(MetricCmdAppendStoredL1)
metrics.IncCounter(MetricCmdAppendStored)
return l.res.Append(req.Opaque, req.Quiet)
}
func (l *L1OnlyOrca) GetE(req common.GetRequest) error {
// For an L1 only orchestrator, this will fail if the backend is memcached.
// It should be talking to another rend-based server, such as the L2 for the
// EVCache server project.
metrics.IncCounterBy(MetricCmdGetEKeys, uint64(len(req.Keys)))
//debugString := "gete"
//for _, k := range req.Keys {
// debugString += " "
// debugString += string(k)
//}
//println(debugString)
metrics.IncCounter(MetricCmdGetEL1)
metrics.IncCounterBy(MetricCmdGetEKeysL1, uint64(len(req.Keys)))
start := timer.Now()
resChan, errChan := l.l1.GetE(req)
var err error
// Read all the responses back from l.l1.
// The contract is that the resChan will have GetEResponse's for get hits and misses,
// and the errChan will have any other errors, such as an out of memory error from
// memcached. If any receive happens from errChan, there will be no more responses
// from resChan.
for {
select {
case res, ok := <-resChan:
if !ok {
resChan = nil
} else {
if res.Miss {
metrics.IncCounter(MetricCmdGetEMissesL1)
metrics.IncCounter(MetricCmdGetEMisses)
} else {
metrics.IncCounter(MetricCmdGetEHits)
metrics.IncCounter(MetricCmdGetEHitsL1)
}
l.res.GetE(res)
}
case getErr, ok := <-errChan:
if !ok {
errChan = nil
} else {
metrics.IncCounter(MetricCmdGetEErrors)
metrics.IncCounter(MetricCmdGetEErrorsL1)
err = getErr
}
}
if resChan == nil && errChan == nil {
break
}
}
metrics.ObserveHist(HistGetEL1, timer.Since(start))
if err == nil {
l.res.GetEnd(req.NoopOpaque, req.NoopEnd)
}
return err
}
func (l *L1L2BatchOrca) Delete(req common.DeleteRequest) error {
//log.Println("delete", string(req.Key))
// Try L2 first
metrics.IncCounter(MetricCmdDeleteL2)
start := timer.Now()
err := l.l2.Delete(req)
metrics.ObserveHist(HistDeleteL2, timer.Since(start))
if err != nil {
// On a delete miss in L2 don't bother deleting in L1. There might be no
// key at all, or another request may be deleting the same key. In that
// case the other will finish up. Returning a key not found will trigger
// error handling to send back an error response.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdDeleteMissesL2)
metrics.IncCounter(MetricCmdDeleteMisses)
return err
}
// If we fail to delete in L2, don't delete in L1. This can leave us in
// an inconsistent state if the request succeeded in L2 but some
// communication error caused the problem. In the typical deployment of
// rend, the L1 and L2 caches are both on the same box with
// communication happening over a unix domain socket. In this case, the
// likelihood of this error path happening is very small.
metrics.IncCounter(MetricCmdDeleteErrorsL2)
metrics.IncCounter(MetricCmdDeleteErrors)
return err
}
metrics.IncCounter(MetricCmdDeleteHitsL2)
// Now delete in L1. This means we're temporarily inconsistent, but also
// eliminated the interleaving where the data is deleted from L1, read from
// L2, set in L1, then deleted in L2. By deleting from L2 first, if L1 goes
// missing then no other request can undo part of this request.
metrics.IncCounter(MetricCmdDeleteL1)
start = timer.Now()
err = l.l1.Delete(req)
metrics.ObserveHist(HistDeleteL1, timer.Since(start))
if err != nil {
// Delete misses in L1 are fine. If we get here, that means the delete
// in L2 hit. This isn't a miss per se since the overall effect is a
// delete. Concurrent deletes might interleave to produce this, or the
// data might have TTL'd out. Both cases are still fine.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdDeleteMissesL1)
metrics.IncCounter(MetricCmdDeleteHits)
// disregard the miss, don't return the error
return l.res.Delete(req.Opaque)
}
metrics.IncCounter(MetricCmdDeleteErrorsL1)
metrics.IncCounter(MetricCmdDeleteErrors)
return err
}
metrics.IncCounter(MetricCmdDeleteHitsL1)
metrics.IncCounter(MetricCmdDeleteHits)
return l.res.Delete(req.Opaque)
}
func (l *L1L2BatchOrca) Touch(req common.TouchRequest) error {
//log.Println("touch", string(req.Key))
// Try L2 first
metrics.IncCounter(MetricCmdTouchL2)
start := timer.Now()
err := l.l2.Touch(req)
metrics.ObserveHist(HistTouchL2, timer.Since(start))
if err != nil {
// On a touch miss in L2 don't bother touch in L1. The data should be
// TTL'd out within a second. This is yet another place where it's
// possible to be inconsistent, but only for a short time. Any
// concurrent requests will see the same behavior as this one. If the
// touch misses here, any other request will see the same view.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdTouchMissesL2)
metrics.IncCounter(MetricCmdTouchMisses)
return err
}
// If we fail to touch in L2, don't touch in L1. If the touch succeeded
// but for some reason the communication failed, then this is still OK
// since L1 can TTL out while L2 still has the data. On the next get
// request the data would still be retrievable, albeit more slowly.
metrics.IncCounter(MetricCmdTouchErrorsL2)
metrics.IncCounter(MetricCmdTouchErrors)
return err
}
metrics.IncCounter(MetricCmdTouchHitsL2)
// Try touching in L1 to touch hot data. I'd avoid doing anything in L1 here
// but it can be a problem if someone decides to touch data down instead of
// up to let it naturally expire. If I don't touch or delete in L1 then data
// in L1 might live longer. Touching keeps hot data hot, while delete is
// more disruptive.
metrics.IncCounter(MetricCmdTouchTouchL1)
start = timer.Now()
err = l.l1.Touch(req)
metrics.ObserveHist(HistTouchL1, timer.Since(start))
if err != nil {
if err == common.ErrKeyNotFound {
// For a touch miss in L1, there's no problem.
metrics.IncCounter(MetricCmdTouchTouchMissesL1)
} else {
metrics.IncCounter(MetricCmdTouchTouchErrorsL1)
metrics.IncCounter(MetricCmdTouchErrors)
return err
}
} else {
metrics.IncCounter(MetricCmdTouchTouchHitsL1)
}
metrics.IncCounter(MetricCmdTouchHits)
return l.res.Touch(req.Opaque)
}
func BenchmarkTimerSince(b *testing.B) {
start := timer.Now()
for i := 0; i < b.N; i++ {
_ = timer.Since(start)
}
}
func (l *L1L2Orca) Gat(req common.GATRequest) error {
//log.Println("gat", string(req.Key))
// Try L1 first
metrics.IncCounter(MetricCmdGatL1)
start := timer.Now()
res, err := l.l1.GAT(req)
metrics.ObserveHist(HistGatL1, timer.Since(start))
// Errors here are genrally fatal to the connection, as something has gone
// seriously wrong. Bail out early.
// I should note that this is different than the other commands, where there
// are some benevolent "errors" that include KeyNotFound or KeyExists. In
// both Get and GAT the mini-internal-protocol is different because the Get
// command uses a channel to send results back and an error channel to signal
// some kind of fatal problem. The result signals non-fatal "errors"; in this
// case it's ErrKeyNotFound --> res.Miss is true.
if err != nil {
metrics.IncCounter(MetricCmdGatErrorsL1)
metrics.IncCounter(MetricCmdGatErrors)
return err
}
if res.Miss {
// If we miss here, we have to GAT L2 to get the data, then put it back
// into L1 with the new TTL.
metrics.IncCounter(MetricCmdGatMissesL1)
metrics.IncCounter(MetricCmdGatL2)
start = timer.Now()
res, err = l.l2.GAT(req)
metrics.ObserveHist(HistGatL2, timer.Since(start))
// fatal error
if err != nil {
metrics.IncCounter(MetricCmdGatErrorsL2)
metrics.IncCounter(MetricCmdGatErrors)
return err
}
// A miss on L2 after L1 is a true miss
if res.Miss {
metrics.IncCounter(MetricCmdGatMissesL2)
metrics.IncCounter(MetricCmdGatMisses)
return l.res.GAT(res)
}
// Take the data from the L2 GAT and set into L1 with the new TTL.
// There's several problems that could arise from interleaving of other
// operations. Another GAT isn't a problem.
//
// Intermediate sets might get clobbered in L1 but remain in L2 if we
// used Set, but since we use Add we should not overwrite a Set that
// happens between the L2 GAT hit and subsequent L1 reconciliation.
//
// Deletes would be a possible problem since a delete hit in L2 and miss
// in L1 would interleave to have data in L1 not in L2. This is a risk
// that is understood and accepted. The typical use cases at Netflix
// will not use deletes concurrently with GATs.
setreq := common.SetRequest{
Key: req.Key,
Exptime: req.Exptime,
Flags: res.Flags,
Data: res.Data,
}
metrics.IncCounter(MetricCmdGatAddL1)
start2 := timer.Now()
err = l.l1.Add(setreq)
metrics.ObserveHist(HistAddL1, timer.Since(start2))
if err != nil {
// we were trampled in the middle of performing the GAT operation
// In this case, it's fine; no error for the overall op. We still
// want to track this with a metric, though, and return success.
if err == common.ErrKeyExists {
metrics.IncCounter(MetricCmdGatAddNotStoredL1)
} else {
metrics.IncCounter(MetricCmdGatAddErrorsL1)
// Gat errors here and not Add. The metrics for L1/L2 correspond to
// direct interaction with the two. THe overall metrics correspond
// to the more abstract orchestrator operation.
metrics.IncCounter(MetricCmdGatErrors)
return err
}
} else {
metrics.IncCounter(MetricCmdGatAddStoredL1)
}
// the overall operation succeeded
metrics.IncCounter(MetricCmdGatHits)
} else {
metrics.IncCounter(MetricCmdGatHitsL1)
// Touch in L2. This used to be a set operation, but touch allows the L2
// to have more control over the operation than a set does. This helps
// migrations internally at Netflix because we can choose to discount
// touch commands in L2 but not sets.
//
// The first possibility is a Set. A set into L2 would possibly cause a
// concurrent delete to not take, meaning the delete could say it was
// successful and then a subsequent get call would show the old data
// that was just deleted.
//
// Another option is to just send a touch, which allows us to send less
// data but gives the possibility of a touch miss on L2, which will be a
// problematic situation. If we get a touch miss, then we know we are
// inconsistent but we don't affect concurrent deletes.
//
// A third option is to use Replace, which could be helpful to avoid
// overriding concurrent deletes. This also might cause problems with
// othr sets at the same time, as it might overwrite a set that just
// finished.
//
// Many heavy users of EVCache at Netflix use GAT commands to lengthen
// TTLs of their data in use and to shorten the TTL of data they will
// not be using which is then async TTL'd out. I am explicitly
// discounting the concurrent delete situation here and accepting that
// they might not be exactly correct.
touchreq := common.TouchRequest{
Key: req.Key,
Exptime: req.Exptime,
}
metrics.IncCounter(MetricCmdGatTouchL2)
start2 := timer.Now()
err := l.l2.Touch(touchreq)
metrics.ObserveHist(HistTouchL2, timer.Since(start2))
if err != nil {
if err == common.ErrKeyNotFound {
// this is a problem. L1 had the item but L2 doesn't. To avoid an
// inconsistent view, return the same ErrNotFound and fail the op.
metrics.IncCounter(MetricInconsistencyDetected)
metrics.IncCounter(MetricCmdGatTouchMissesL2)
metrics.IncCounter(MetricCmdGatMisses)
} else {
// If there's a true error, return it as our error. The GAT
// succeeded in L1 but if L2 didn't take, then likely something
// is seriously wrong.
metrics.IncCounter(MetricCmdGatTouchErrorsL2)
metrics.IncCounter(MetricCmdGatErrors)
}
return err
}
metrics.IncCounter(MetricCmdGatTouchHitsL2)
// overall operation succeeded
metrics.IncCounter(MetricCmdGatHits)
}
return l.res.GAT(res)
}
func (l *L1L2Orca) Replace(req common.SetRequest) error {
//log.Println("replace", string(req.Key))
// Replace in L2 first, since it has the larger state
metrics.IncCounter(MetricCmdReplaceL2)
start := timer.Now()
err := l.l2.Replace(req)
metrics.ObserveHist(HistReplaceL2, timer.Since(start))
if err != nil {
// A key not existing is not an error per se, it's a part of the
// functionality of the replace command to respond with a "not stored"
// in the form of an ErrKeyNotFound. Hence no error metrics.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdReplaceNotStoredL2)
metrics.IncCounter(MetricCmdReplaceNotStored)
return err
}
// otherwise we have a real error on our hands
metrics.IncCounter(MetricCmdReplaceErrorsL2)
metrics.IncCounter(MetricCmdReplaceErrors)
return err
}
metrics.IncCounter(MetricCmdReplaceStoredL2)
// Now on to L1. For a replace, the L2 succeeding means that the key is
// successfully replaced in L2, but in the middle here "anything can happen"
// so we have to think about concurrent operations. In a concurrent set
// situation, both L2 and L1 might have the same value from the set. In this
// case an add will fail and cause correct behavior. In a concurrent delete
// that hits in L2 (for the newly replaced data) and hits in L1 (for the
// data that was about to be replaced) then an add will cause a consistency
// problem by setting a key that shouldn't exist in L1 because it's not in
// L2. set and replace have the opposite problem, since they might overwrite
// a legitimate set that happened concurrently in the middle of the two
// operations. There is no one operation that solves these, so:
//
// The use of replace here explicitly assumes there is no concurrent set for
// the same key.
//
// The other risk here is a concurrent replace for the same key, which will
// possibly interleave to produce inconsistency in L2 and L1.
metrics.IncCounter(MetricCmdReplaceL1)
start = timer.Now()
err = l.l1.Replace(req)
metrics.ObserveHist(HistReplaceL1, timer.Since(start))
if err != nil {
// In this case, the replace worked fine, and we don't worry about it not
// being replaced in L1 because it did not exist. In this case, L2 has
// the data and L1 is empty. This is still correct, and the next get
// would place the data back into L1. Hence, we do not return the error.
if err == common.ErrKeyNotFound {
metrics.IncCounter(MetricCmdReplaceNotStoredL1)
metrics.IncCounter(MetricCmdReplaceNotStored)
return l.res.Replace(req.Opaque, req.Quiet)
}
// otherwise we have a real error on our hands
metrics.IncCounter(MetricCmdReplaceErrorsL1)
metrics.IncCounter(MetricCmdReplaceErrors)
return err
}
metrics.IncCounter(MetricCmdReplaceStoredL1)
metrics.IncCounter(MetricCmdReplaceStored)
return l.res.Replace(req.Opaque, req.Quiet)
}
func (l *L1L2BatchOrca) Gat(req common.GATRequest) error {
//log.Println("gat", string(req.Key))
// Perform L2 for correctness, invalidate in L1 later
metrics.IncCounter(MetricCmdGatL2)
start := timer.Now()
res, err := l.l2.GAT(req)
metrics.ObserveHist(HistGatL2, timer.Since(start))
// Errors here are genrally fatal to the connection, as something has gone
// seriously wrong. Bail out early.
// I should note that this is different than the other commands, where there
// are some benevolent "errors" that include KeyNotFound or KeyExists. In
// both Get and GAT the mini-internal-protocol is different because the Get
// command uses a channel to send results back and an error channel to signal
// some kind of fatal problem. The result signals non-fatal "errors"; in this
// case it's ErrKeyNotFound --> res.Miss is true.
if err != nil {
metrics.IncCounter(MetricCmdGatErrorsL2)
metrics.IncCounter(MetricCmdGatErrors)
return err
}
if res.Miss {
// We got a true miss here. L1 is assumed to be missing the data if L2
// does not have it.
metrics.IncCounter(MetricCmdGatMissesL2)
metrics.IncCounter(MetricCmdGatMisses)
} else {
metrics.IncCounter(MetricCmdGatHitsL2)
// Success finding and touching the data in L2, but still need to touch
// in L1
touchreq := common.TouchRequest{
Key: req.Key,
Opaque: req.Opaque,
}
// Try touching in L1 to touch hot data. See touch impl for reasoning.
metrics.IncCounter(MetricCmdGatTouchL1)
start = timer.Now()
err = l.l1.Touch(touchreq)
metrics.ObserveHist(HistTouchL1, timer.Since(start))
if err != nil {
if err == common.ErrKeyNotFound {
// For a touch miss in L1, there's no problem.
metrics.IncCounter(MetricCmdGatTouchMissesL1)
} else {
metrics.IncCounter(MetricCmdGatTouchErrorsL1)
metrics.IncCounter(MetricCmdGatErrors)
return err
}
} else {
metrics.IncCounter(MetricCmdGatTouchHitsL1)
}
// overall operation succeeded
metrics.IncCounter(MetricCmdGatHits)
}
return l.res.GAT(res)
}
