func (ip6 *IPv6) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
ip6.Version = uint8(data[0]) >> 4
ip6.TrafficClass = uint8((binary.BigEndian.Uint16(data[0:2]) >> 4) & 0x00FF)
ip6.FlowLabel = binary.BigEndian.Uint32(data[0:4]) & 0x000FFFFF
ip6.Length = binary.BigEndian.Uint16(data[4:6])
ip6.NextHeader = IPProtocol(data[6])
ip6.HopLimit = data[7]
ip6.SrcIP = data[8:24]
ip6.DstIP = data[24:40]
ip6.HopByHop = nil
// We initially set the payload to all bytes after 40. ip6.Length or the
// HopByHop jumbogram option can both change this eventually, though.
ip6.BaseLayer = BaseLayer{data[:40], data[40:]}
// We treat a HopByHop IPv6 option as part of the IPv6 packet, since its
// options are crucial for understanding what's actually happening per packet.
if ip6.NextHeader == IPProtocolIPv6HopByHop {
ip6.hbh.DecodeFromBytes(ip6.Payload, df)
hbhLen := len(ip6.hbh.Contents)
// Reset IPv6 contents to include the HopByHop header.
ip6.BaseLayer = BaseLayer{data[:40+hbhLen], data[40+hbhLen:]}
ip6.HopByHop = &ip6.hbh
if ip6.Length == 0 {
for _, o := range ip6.hbh.Options {
if o.OptionType == IPv6HopByHopOptionJumbogram {
if len(o.OptionData) != 4 {
return fmt.Errorf("Invalid jumbo packet option length")
}
payloadLength := binary.BigEndian.Uint32(o.OptionData)
pEnd := int(payloadLength)
if pEnd > len(ip6.Payload) {
df.SetTruncated()
} else {
ip6.Payload = ip6.Payload[:pEnd]
ip6.hbh.Payload = ip6.Payload
}
return nil
}
}
return fmt.Errorf("IPv6 length 0, but HopByHop header does not have jumbogram option")
}
}
if ip6.Length == 0 {
return fmt.Errorf("IPv6 length 0, but next header is %v, not HopByHop", ip6.NextHeader)
} else {
pEnd := int(ip6.Length)
if pEnd > len(ip6.Payload) {
df.SetTruncated()
pEnd = len(ip6.Payload)
}
ip6.Payload = ip6.Payload[:pEnd]
}
return nil
}
func (i *ICMPv4) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
if len(data) < 8 {
df.SetTruncated()
return tooShort
}
i.TypeCode = ICMPv4TypeCode(binary.BigEndian.Uint16(data[:2]))
i.Checksum = binary.BigEndian.Uint16(data[2:4])
i.Id = binary.BigEndian.Uint16(data[4:6])
i.Seq = binary.BigEndian.Uint16(data[6:8])
i.BaseLayer = BaseLayer{data[:8], data[8:]}
return nil
}
func (eth *Ethernet) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
if len(data) < 14 {
return errors.New("Ethernet packet too small")
}
eth.DstMAC = net.HardwareAddr(data[0:6])
eth.SrcMAC = net.HardwareAddr(data[6:12])
eth.EthernetType = EthernetType(binary.BigEndian.Uint16(data[12:14]))
eth.BaseLayer = BaseLayer{data[:14], data[14:]}
if eth.EthernetType < 0x0600 {
eth.Length = uint16(eth.EthernetType)
eth.EthernetType = EthernetTypeLLC
if cmp := len(eth.Payload) - int(eth.Length); cmp < 0 {
df.SetTruncated()
} else if cmp > 0 {
// Strip off bytes at the end, since we have too many bytes
eth.Payload = eth.Payload[:len(eth.Payload)-cmp]
}
// fmt.Println(eth)
}
return nil
}
func (udp *UDP) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
udp.SrcPort = UDPPort(binary.BigEndian.Uint16(data[0:2]))
udp.sPort = data[0:2]
udp.DstPort = UDPPort(binary.BigEndian.Uint16(data[2:4]))
udp.dPort = data[2:4]
udp.Length = binary.BigEndian.Uint16(data[4:6])
udp.Checksum = binary.BigEndian.Uint16(data[6:8])
udp.BaseLayer = BaseLayer{Contents: data[:8]}
switch {
case udp.Length >= 8:
hlen := int(udp.Length)
if hlen > len(data) {
df.SetTruncated()
hlen = len(data)
}
udp.Payload = data[8:hlen]
case udp.Length == 0: // Jumbogram, use entire rest of data
udp.Payload = data[8:]
default:
return fmt.Errorf("UDP packet too small: %d bytes", udp.Length)
}
return nil
}
// DecodeFromBytes decodes the given bytes into this layer.
func (ip *IPv4) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
flagsfrags := binary.BigEndian.Uint16(data[6:8])
ip.Version = uint8(data[0]) >> 4
ip.IHL = uint8(data[0]) & 0x0F
ip.TOS = data[1]
ip.Length = binary.BigEndian.Uint16(data[2:4])
ip.Id = binary.BigEndian.Uint16(data[4:6])
ip.Flags = IPv4Flag(flagsfrags >> 13)
ip.FragOffset = flagsfrags & 0x1FFF
ip.TTL = data[8]
ip.Protocol = IPProtocol(data[9])
ip.Checksum = binary.BigEndian.Uint16(data[10:12])
ip.SrcIP = data[12:16]
ip.DstIP = data[16:20]
// Set up an initial guess for contents/payload... we'll reset these soon.
ip.BaseLayer = BaseLayer{Contents: data}
if ip.Length < 20 {
return fmt.Errorf("Invalid (too small) IP length (%d < 20)", ip.Length)
} else if ip.IHL < 5 {
return fmt.Errorf("Invalid (too small) IP header length (%d < 5)", ip.IHL)
} else if int(ip.IHL*4) > int(ip.Length) {
return fmt.Errorf("Invalid IP header length > IP length (%d > %d)", ip.IHL, ip.Length)
}
if cmp := len(data) - int(ip.Length); cmp > 0 {
data = data[:ip.Length]
} else if cmp < 0 {
df.SetTruncated()
if int(ip.IHL)*4 > len(data) {
return fmt.Errorf("Not all IP header bytes available")
}
}
ip.Contents = data[:ip.IHL*4]
ip.Payload = data[ip.IHL*4:]
// From here on, data contains the header options.
data = data[20 : ip.IHL*4]
// Pull out IP options
for len(data) > 0 {
if ip.Options == nil {
// Pre-allocate to avoid growing the slice too much.
ip.Options = make([]IPv4Option, 0, 4)
}
opt := IPv4Option{OptionType: data[0]}
switch opt.OptionType {
case 0: // End of options
opt.OptionLength = 1
ip.Options = append(ip.Options, opt)
ip.Padding = data[1:]
break
case 1: // 1 byte padding
opt.OptionLength = 1
default:
opt.OptionLength = data[1]
opt.OptionData = data[2:opt.OptionLength]
}
if len(data) >= int(opt.OptionLength) {
data = data[opt.OptionLength:]
} else {
return fmt.Errorf("IP option length exceeds remaining IP header size, option type %v length %v", opt.OptionType, opt.OptionLength)
}
ip.Options = append(ip.Options, opt)
}
return nil
}
// DecodeFromBytes decodes the slice into the DNS struct.
func (d *DNS) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
d.buffer = d.buffer[:0]
if len(data) < 12 {
df.SetTruncated()
return fmt.Errorf("DNS packet too short")
}
d.ID = binary.BigEndian.Uint16(data[:2])
d.QR = data[2]&0x80 != 0
d.OpCode = DNSOpCode(data[2]>>3) & 0x0F
d.AA = data[2]&0x04 != 0
d.TC = data[2]&0x02 != 0
d.RD = data[2]&0x01 != 0
d.RA = data[3]&0x80 != 0
d.Z = uint8(data[3]>>4) & 0x7
d.ResponseCode = DNSResponseCode(data[3] & 0xF)
d.QDCount = binary.BigEndian.Uint16(data[4:6])
d.ANCount = binary.BigEndian.Uint16(data[6:8])
d.NSCount = binary.BigEndian.Uint16(data[8:10])
d.ARCount = binary.BigEndian.Uint16(data[10:12])
d.Questions = d.Questions[:0]
d.Answers = d.Answers[:0]
d.Authorities = d.Authorities[:0]
d.Additionals = d.Additionals[:0]
offset := 12
var err error
for i := 0; i < int(d.QDCount); i++ {
var q DNSQuestion
if offset, err = q.decode(data, offset, df, &d.buffer); err != nil {
return err
}
d.Questions = append(d.Questions, q)
}
// For some horrible reason, if we do the obvious thing in this loop:
// var r DNSResourceRecord
// if blah := r.decode(blah); err != nil {
// return err
// }
// d.Foo = append(d.Foo, r)
// the Go compiler thinks that 'r' escapes to the heap, causing a malloc for
// every Answer, Authority, and Additional. To get around this, we do
// something really silly: we append an empty resource record to our slice,
// then use the last value in the slice to call decode. Since the value is
// already in the slice, there's no WAY it can escape... on the other hand our
// code is MUCH uglier :(
for i := 0; i < int(d.ANCount); i++ {
d.Answers = append(d.Answers, DNSResourceRecord{})
if offset, err = d.Answers[i].decode(data, offset, df, &d.buffer); err != nil {
d.Answers = d.Answers[:i] // strip off erroneous value
return err
}
}
for i := 0; i < int(d.NSCount); i++ {
d.Authorities = append(d.Authorities, DNSResourceRecord{})
if offset, err = d.Authorities[i].decode(data, offset, df, &d.buffer); err != nil {
d.Authorities = d.Authorities[:i] // strip off erroneous value
return err
}
}
for i := 0; i < int(d.ARCount); i++ {
d.Additionals = append(d.Additionals, DNSResourceRecord{})
if offset, err = d.Additionals[i].decode(data, offset, df, &d.buffer); err != nil {
d.Additionals = d.Additionals[:i] // strip off erroneous value
return err
}
}
if uint16(len(d.Questions)) != d.QDCount {
return errors.New("Invalid query decoding, not the right number of questions")
} else if uint16(len(d.Answers)) != d.ANCount {
return errors.New("Invalid query decoding, not the right number of answers")
} else if uint16(len(d.Authorities)) != d.NSCount {
return errors.New("Invalid query decoding, not the right number of authorities")
} else if uint16(len(d.Additionals)) != d.ARCount {
return errors.New("Invalid query decoding, not the right number of additionals info")
}
return nil
}
func (tcp *TCP) DecodeFromBytes(data []byte, df gopacket.DecodeFeedback) error {
tcp.SrcPort = TCPPort(binary.BigEndian.Uint16(data[0:2]))
tcp.sPort = data[0:2]
tcp.DstPort = TCPPort(binary.BigEndian.Uint16(data[2:4]))
tcp.dPort = data[2:4]
tcp.Seq = binary.BigEndian.Uint32(data[4:8])
tcp.Ack = binary.BigEndian.Uint32(data[8:12])
tcp.DataOffset = data[12] >> 4
tcp.FIN = data[13]&0x01 != 0
tcp.SYN = data[13]&0x02 != 0
tcp.RST = data[13]&0x04 != 0
tcp.PSH = data[13]&0x08 != 0
tcp.ACK = data[13]&0x10 != 0
tcp.URG = data[13]&0x20 != 0
tcp.ECE = data[13]&0x40 != 0
tcp.CWR = data[13]&0x80 != 0
tcp.NS = data[12]&0x01 != 0
tcp.Window = binary.BigEndian.Uint16(data[14:16])
tcp.Checksum = binary.BigEndian.Uint16(data[16:18])
tcp.Urgent = binary.BigEndian.Uint16(data[18:20])
tcp.Options = tcp.opts[:0]
if tcp.DataOffset < 5 {
return fmt.Errorf("Invalid TCP data offset %d < 5", tcp.DataOffset)
}
dataStart := int(tcp.DataOffset) * 4
if dataStart > len(data) {
df.SetTruncated()
tcp.Payload = nil
tcp.Contents = data
return errors.New("TCP data offset greater than packet length")
}
tcp.Contents = data[:dataStart]
tcp.Payload = data[dataStart:]
// From here on, data points just to the header options.
data = data[20:dataStart]
for len(data) > 0 {
if tcp.Options == nil {
// Pre-allocate to avoid allocating a slice.
tcp.Options = tcp.opts[:0]
}
tcp.Options = append(tcp.Options, TCPOption{OptionType: data[0]})
opt := &tcp.Options[len(tcp.Options)-1]
switch opt.OptionType {
case 0: // End of options
opt.OptionLength = 1
tcp.Padding = data[1:]
break
case 1: // 1 byte padding
opt.OptionLength = 1
default:
opt.OptionLength = data[1]
if opt.OptionLength < 2 {
return fmt.Errorf("Invalid TCP option length %d < 2", opt.OptionLength)
} else if int(opt.OptionLength) > len(data) {
return fmt.Errorf("Invalid TCP option length %d exceeds remaining %d bytes", opt.OptionLength, len(data))
}
opt.OptionData = data[2:opt.OptionLength]
}
data = data[opt.OptionLength:]
}
return nil
}