func registerFlagInt(t reflect.Kind, fs *pflag.FlagSet, field interface{}, parts []string, vt int64, desc string) {
switch t {
case reflect.Int:
if len(parts) == 1 {
fs.IntVar(field.(*int), parts[0], int(vt), desc)
} else {
fs.IntVarP(field.(*int), parts[0], parts[1], int(vt), desc)
}
case reflect.Int8:
if len(parts) == 1 {
fs.Int8Var(field.(*int8), parts[0], int8(vt), desc)
} else {
fs.Int8VarP(field.(*int8), parts[0], parts[1], int8(vt), desc)
}
case reflect.Int32:
if len(parts) == 1 {
fs.Int32Var(field.(*int32), parts[0], int32(vt), desc)
} else {
fs.Int32VarP(field.(*int32), parts[0], parts[1], int32(vt), desc)
}
case reflect.Int64:
if len(parts) == 1 {
fs.Int64Var(field.(*int64), parts[0], int64(vt), desc)
} else {
fs.Int64VarP(field.(*int64), parts[0], parts[1], int64(vt), desc)
}
}
}
// AddFlags adds flags for a specific ProxyServer to the specified FlagSet
func (s *ProxyServerConfig) AddFlags(fs *pflag.FlagSet) {
fs.Var(componentconfig.IPVar{Val: &s.BindAddress}, "bind-address", "The IP address for the proxy server to serve on (set to 0.0.0.0 for all interfaces)")
fs.BoolVar(&s.DisableHyperInternalService, "disable-hyper-internal-service", s.DisableHyperInternalService, "Disable the internal haproxy service in Hyper pods")
fs.StringVar(&s.Master, "master", s.Master, "The address of the Kubernetes API server (overrides any value in kubeconfig)")
fs.Int32Var(&s.HealthzPort, "healthz-port", s.HealthzPort, "The port to bind the health check server. Use 0 to disable.")
fs.Var(componentconfig.IPVar{Val: &s.HealthzBindAddress}, "healthz-bind-address", "The IP address for the health check server to serve on, defaulting to 127.0.0.1 (set to 0.0.0.0 for all interfaces)")
fs.Int32Var(s.OOMScoreAdj, "oom-score-adj", util.Int32PtrDerefOr(s.OOMScoreAdj, int32(qos.KubeProxyOOMScoreAdj)), "The oom-score-adj value for kube-proxy process. Values must be within the range [-1000, 1000]")
fs.StringVar(&s.ResourceContainer, "resource-container", s.ResourceContainer, "Absolute name of the resource-only container to create and run the Kube-proxy in (Default: /kube-proxy).")
fs.MarkDeprecated("resource-container", "This feature will be removed in a later release.")
fs.StringVar(&s.Kubeconfig, "kubeconfig", s.Kubeconfig, "Path to kubeconfig file with authorization information (the master location is set by the master flag).")
fs.Var(componentconfig.PortRangeVar{Val: &s.PortRange}, "proxy-port-range", "Range of host ports (beginPort-endPort, inclusive) that may be consumed in order to proxy service traffic. If unspecified (0-0) then ports will be randomly chosen.")
fs.StringVar(&s.HostnameOverride, "hostname-override", s.HostnameOverride, "If non-empty, will use this string as identification instead of the actual hostname.")
fs.Var(&s.Mode, "proxy-mode", "Which proxy mode to use: 'userspace' (older) or 'iptables' (faster). If blank, look at the Node object on the Kubernetes API and respect the '"+ExperimentalProxyModeAnnotation+"' annotation if provided. Otherwise use the best-available proxy (currently iptables). If the iptables proxy is selected, regardless of how, but the system's kernel or iptables versions are insufficient, this always falls back to the userspace proxy.")
fs.Int32Var(s.IPTablesMasqueradeBit, "iptables-masquerade-bit", util.Int32PtrDerefOr(s.IPTablesMasqueradeBit, 14), "If using the pure iptables proxy, the bit of the fwmark space to mark packets requiring SNAT with. Must be within the range [0, 31].")
fs.DurationVar(&s.IPTablesSyncPeriod.Duration, "iptables-sync-period", s.IPTablesSyncPeriod.Duration, "How often iptables rules are refreshed (e.g. '5s', '1m', '2h22m'). Must be greater than 0.")
fs.DurationVar(&s.ConfigSyncPeriod, "config-sync-period", s.ConfigSyncPeriod, "How often configuration from the apiserver is refreshed. Must be greater than 0.")
fs.BoolVar(&s.MasqueradeAll, "masquerade-all", s.MasqueradeAll, "If using the pure iptables proxy, SNAT everything")
fs.StringVar(&s.ClusterCIDR, "cluster-cidr", s.ClusterCIDR, "The CIDR range of pods in the cluster. It is used to bridge traffic coming from outside of the cluster. If not provided, no off-cluster bridging will be performed.")
fs.BoolVar(&s.CleanupAndExit, "cleanup-iptables", s.CleanupAndExit, "If true cleanup iptables rules and exit.")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "Content type of requests sent to apiserver.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.DurationVar(&s.UDPIdleTimeout.Duration, "udp-timeout", s.UDPIdleTimeout.Duration, "How long an idle UDP connection will be kept open (e.g. '250ms', '2s'). Must be greater than 0. Only applicable for proxy-mode=userspace")
fs.Int32Var(&s.ConntrackMax, "conntrack-max", s.ConntrackMax, "Maximum number of NAT connections to track (0 to leave as-is)")
fs.DurationVar(&s.ConntrackTCPEstablishedTimeout.Duration, "conntrack-tcp-timeout-established", s.ConntrackTCPEstablishedTimeout.Duration, "Idle timeout for established TCP connections (0 to leave as-is)")
}
// AddFlags adds flags for a specific ExternalCMServer to the specified FlagSet
func (s *CloudControllerManagerServer) AddFlags(fs *pflag.FlagSet) {
fs.Int32Var(&s.Port, "port", s.Port, "The port that the cloud-controller-manager's http service runs on")
fs.Var(componentconfig.IPVar{Val: &s.Address}, "address", "The IP address to serve on (set to 0.0.0.0 for all interfaces)")
fs.StringVar(&s.CloudProvider, "cloud-provider", s.CloudProvider, "The provider of cloud services. Empty for no provider.")
fs.StringVar(&s.CloudConfigFile, "cloud-config", s.CloudConfigFile, "The path to the cloud provider configuration file. Empty string for no configuration file.")
fs.DurationVar(&s.MinResyncPeriod.Duration, "min-resync-period", s.MinResyncPeriod.Duration, "The resync period in reflectors will be random between MinResyncPeriod and 2*MinResyncPeriod")
fs.DurationVar(&s.NodeMonitorPeriod.Duration, "node-monitor-period", s.NodeMonitorPeriod.Duration,
"The period for syncing NodeStatus in NodeController.")
fs.StringVar(&s.ServiceAccountKeyFile, "service-account-private-key-file", s.ServiceAccountKeyFile, "Filename containing a PEM-encoded private RSA or ECDSA key used to sign service account tokens.")
fs.BoolVar(&s.UseServiceAccountCredentials, "use-service-account-credentials", s.UseServiceAccountCredentials, "If true, use individual service account credentials for each controller.")
fs.DurationVar(&s.RouteReconciliationPeriod.Duration, "route-reconciliation-period", s.RouteReconciliationPeriod.Duration, "The period for reconciling routes created for Nodes by cloud provider.")
fs.BoolVar(&s.ConfigureCloudRoutes, "configure-cloud-routes", true, "Should CIDRs allocated by allocate-node-cidrs be configured on the cloud provider.")
fs.BoolVar(&s.EnableProfiling, "profiling", true, "Enable profiling via web interface host:port/debug/pprof/")
fs.StringVar(&s.ClusterCIDR, "cluster-cidr", s.ClusterCIDR, "CIDR Range for Pods in cluster.")
fs.BoolVar(&s.AllocateNodeCIDRs, "allocate-node-cidrs", false, "Should CIDRs for Pods be allocated and set on the cloud provider.")
fs.StringVar(&s.Master, "master", s.Master, "The address of the Kubernetes API server (overrides any value in kubeconfig)")
fs.StringVar(&s.Kubeconfig, "kubeconfig", s.Kubeconfig, "Path to kubeconfig file with authorization and master location information.")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "Content type of requests sent to apiserver.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.DurationVar(&s.ControllerStartInterval.Duration, "controller-start-interval", s.ControllerStartInterval.Duration, "Interval between starting controller managers.")
leaderelection.BindFlags(&s.LeaderElection, fs)
config.DefaultFeatureGate.AddFlag(fs)
}
// AddFlags adds flags for a specific CMServer to the specified FlagSet
func (s *CMServer) AddFlags(fs *pflag.FlagSet) {
fs.IntVar(&s.Port, "port", s.Port, "The port that the controller-manager's http service runs on")
fs.Var(componentconfig.IPVar{Val: &s.Address}, "address", "The IP address to serve on (set to 0.0.0.0 for all interfaces)")
fs.StringVar(&s.CloudProvider, "cloud-provider", s.CloudProvider, "The provider for cloud services. Empty string for no provider.")
fs.StringVar(&s.CloudConfigFile, "cloud-config", s.CloudConfigFile, "The path to the cloud provider configuration file. Empty string for no configuration file.")
fs.IntVar(&s.ConcurrentEndpointSyncs, "concurrent-endpoint-syncs", s.ConcurrentEndpointSyncs, "The number of endpoint syncing operations that will be done concurrently. Larger number = faster endpoint updating, but more CPU (and network) load")
fs.IntVar(&s.ConcurrentRCSyncs, "concurrent_rc_syncs", s.ConcurrentRCSyncs, "The number of replication controllers that are allowed to sync concurrently. Larger number = more responsive replica management, but more CPU (and network) load")
fs.IntVar(&s.ConcurrentRSSyncs, "concurrent-replicaset-syncs", s.ConcurrentRSSyncs, "The number of replica sets that are allowed to sync concurrently. Larger number = more responsive replica management, but more CPU (and network) load")
fs.IntVar(&s.ConcurrentResourceQuotaSyncs, "concurrent-resource-quota-syncs", s.ConcurrentResourceQuotaSyncs, "The number of resource quotas that are allowed to sync concurrently. Larger number = more responsive quota management, but more CPU (and network) load")
fs.IntVar(&s.ConcurrentDeploymentSyncs, "concurrent-deployment-syncs", s.ConcurrentDeploymentSyncs, "The number of deployment objects that are allowed to sync concurrently. Larger number = more responsive deployments, but more CPU (and network) load")
fs.IntVar(&s.ConcurrentNamespaceSyncs, "concurrent-namespace-syncs", s.ConcurrentNamespaceSyncs, "The number of namespace objects that are allowed to sync concurrently. Larger number = more responsive namespace termination, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentSATokenSyncs, "concurrent-serviceaccount-token-syncs", s.ConcurrentSATokenSyncs, "The number of service account token objects that are allowed to sync concurrently. Larger number = more responsive token generation, but more CPU (and network) load")
fs.IntVar(&s.LookupCacheSizeForRC, "replication-controller-lookup-cache-size", s.LookupCacheSizeForRC, "The the size of lookup cache for replication controllers. Larger number = more responsive replica management, but more MEM load.")
fs.IntVar(&s.LookupCacheSizeForRS, "replicaset-lookup-cache-size", s.LookupCacheSizeForRS, "The the size of lookup cache for replicatsets. Larger number = more responsive replica management, but more MEM load.")
fs.IntVar(&s.LookupCacheSizeForDaemonSet, "daemonset-lookup-cache-size", s.LookupCacheSizeForDaemonSet, "The the size of lookup cache for daemonsets. Larger number = more responsive daemonsets, but more MEM load.")
fs.DurationVar(&s.ServiceSyncPeriod.Duration, "service-sync-period", s.ServiceSyncPeriod.Duration, "The period for syncing services with their external load balancers")
fs.DurationVar(&s.NodeSyncPeriod.Duration, "node-sync-period", s.NodeSyncPeriod.Duration, ""+
"The period for syncing nodes from cloudprovider. Longer periods will result in "+
"fewer calls to cloud provider, but may delay addition of new nodes to cluster.")
fs.DurationVar(&s.ResourceQuotaSyncPeriod.Duration, "resource-quota-sync-period", s.ResourceQuotaSyncPeriod.Duration, "The period for syncing quota usage status in the system")
fs.DurationVar(&s.NamespaceSyncPeriod.Duration, "namespace-sync-period", s.NamespaceSyncPeriod.Duration, "The period for syncing namespace life-cycle updates")
fs.DurationVar(&s.PVClaimBinderSyncPeriod.Duration, "pvclaimbinder-sync-period", s.PVClaimBinderSyncPeriod.Duration, "The period for syncing persistent volumes and persistent volume claims")
fs.DurationVar(&s.MinResyncPeriod.Duration, "min-resync-period", s.MinResyncPeriod.Duration, "The resync period in reflectors will be random between MinResyncPeriod and 2*MinResyncPeriod")
fs.StringVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathNFS, "pv-recycler-pod-template-filepath-nfs", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathNFS, "The file path to a pod definition used as a template for NFS persistent volume recycling")
fs.IntVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutNFS, "pv-recycler-minimum-timeout-nfs", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutNFS, "The minimum ActiveDeadlineSeconds to use for an NFS Recycler pod")
fs.IntVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutNFS, "pv-recycler-increment-timeout-nfs", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutNFS, "the increment of time added per Gi to ActiveDeadlineSeconds for an NFS scrubber pod")
fs.StringVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathHostPath, "pv-recycler-pod-template-filepath-hostpath", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathHostPath, "The file path to a pod definition used as a template for HostPath persistent volume recycling. This is for development and testing only and will not work in a multi-node cluster.")
fs.IntVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutHostPath, "pv-recycler-minimum-timeout-hostpath", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutHostPath, "The minimum ActiveDeadlineSeconds to use for a HostPath Recycler pod. This is for development and testing only and will not work in a multi-node cluster.")
fs.IntVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutHostPath, "pv-recycler-timeout-increment-hostpath", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutHostPath, "the increment of time added per Gi to ActiveDeadlineSeconds for a HostPath scrubber pod. This is for development and testing only and will not work in a multi-node cluster.")
fs.BoolVar(&s.VolumeConfiguration.EnableHostPathProvisioning, "enable-hostpath-provisioner", s.VolumeConfiguration.EnableHostPathProvisioning, "Enable HostPath PV provisioning when running without a cloud provider. This allows testing and development of provisioning features. HostPath provisioning is not supported in any way, won't work in a multi-node cluster, and should not be used for anything other than testing or development.")
fs.IntVar(&s.TerminatedPodGCThreshold, "terminated-pod-gc-threshold", s.TerminatedPodGCThreshold, "Number of terminated pods that can exist before the terminated pod garbage collector starts deleting terminated pods. If <= 0, the terminated pod garbage collector is disabled.")
fs.DurationVar(&s.HorizontalPodAutoscalerSyncPeriod.Duration, "horizontal-pod-autoscaler-sync-period", s.HorizontalPodAutoscalerSyncPeriod.Duration, "The period for syncing the number of pods in horizontal pod autoscaler.")
fs.DurationVar(&s.DeploymentControllerSyncPeriod.Duration, "deployment-controller-sync-period", s.DeploymentControllerSyncPeriod.Duration, "Period for syncing the deployments.")
fs.DurationVar(&s.PodEvictionTimeout.Duration, "pod-eviction-timeout", s.PodEvictionTimeout.Duration, "The grace period for deleting pods on failed nodes.")
fs.Float32Var(&s.DeletingPodsQps, "deleting-pods-qps", 0.1, "Number of nodes per second on which pods are deleted in case of node failure.")
fs.IntVar(&s.DeletingPodsBurst, "deleting-pods-burst", 10, "Number of nodes on which pods are bursty deleted in case of node failure. For more details look into RateLimiter.")
fs.IntVar(&s.RegisterRetryCount, "register-retry-count", s.RegisterRetryCount, ""+
"The number of retries for initial node registration. Retry interval equals node-sync-period.")
fs.MarkDeprecated("register-retry-count", "This flag is currently no-op and will be deleted.")
fs.DurationVar(&s.NodeMonitorGracePeriod.Duration, "node-monitor-grace-period", s.NodeMonitorGracePeriod.Duration,
"Amount of time which we allow running Node to be unresponsive before marking it unhealty. "+
"Must be N times more than kubelet's nodeStatusUpdateFrequency, "+
"where N means number of retries allowed for kubelet to post node status.")
fs.DurationVar(&s.NodeStartupGracePeriod.Duration, "node-startup-grace-period", s.NodeStartupGracePeriod.Duration,
"Amount of time which we allow starting Node to be unresponsive before marking it unhealty.")
fs.DurationVar(&s.NodeMonitorPeriod.Duration, "node-monitor-period", s.NodeMonitorPeriod.Duration,
"The period for syncing NodeStatus in NodeController.")
fs.StringVar(&s.ServiceAccountKeyFile, "service-account-private-key-file", s.ServiceAccountKeyFile, "Filename containing a PEM-encoded private RSA key used to sign service account tokens.")
fs.BoolVar(&s.EnableProfiling, "profiling", true, "Enable profiling via web interface host:port/debug/pprof/")
fs.StringVar(&s.ClusterName, "cluster-name", s.ClusterName, "The instance prefix for the cluster")
fs.StringVar(&s.ClusterCIDR, "cluster-cidr", s.ClusterCIDR, "CIDR Range for Pods in cluster.")
fs.BoolVar(&s.AllocateNodeCIDRs, "allocate-node-cidrs", false, "Should CIDRs for Pods be allocated and set on the cloud provider.")
fs.StringVar(&s.Master, "master", s.Master, "The address of the Kubernetes API server (overrides any value in kubeconfig)")
fs.StringVar(&s.Kubeconfig, "kubeconfig", s.Kubeconfig, "Path to kubeconfig file with authorization and master location information.")
fs.StringVar(&s.RootCAFile, "root-ca-file", s.RootCAFile, "If set, this root certificate authority will be included in service account's token secret. This must be a valid PEM-encoded CA bundle.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.IntVar(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
leaderelection.BindFlags(&s.LeaderElection, fs)
}
// GLog binds the log flags from the default Google "flag" package into a pflag.FlagSet.
func GLog(flags *pflag.FlagSet) {
from := flag.CommandLine
if flag := from.Lookup("v"); flag != nil {
level := flag.Value.(*glog.Level)
levelPtr := (*int32)(level)
flags.Int32Var(levelPtr, "loglevel", 0, "Set the level of log output (0-5)")
}
}
func setupGlog(flags *pflag.FlagSet) {
from := flag.CommandLine
if fflag := from.Lookup("v"); fflag != nil {
level := fflag.Value.(*glog.Level)
levelPtr := (*int32)(level)
flags.Int32Var(levelPtr, "loglevel", 0, "Set the level of log output (0-5)")
}
// FIXME currently glog has only option to redirect output to stderr
// the preferred for STI would be to redirect to stdout
flag.CommandLine.Set("logtostderr", "true")
}
// GLog binds the log flags from the default Google "flag" package into a pflag.FlagSet.
func GLog(flags *pflag.FlagSet) {
from := flag.CommandLine
if flag := from.Lookup("v"); flag != nil {
level := flag.Value.(*glog.Level)
levelPtr := (*int32)(level)
flags.Int32Var(levelPtr, "loglevel", 0, "Set the level of log output (0-5)")
}
if flag := from.Lookup("vmodule"); flag != nil {
value := flag.Value
flags.Var(pflagValue{value}, "logspec", "Set per module logging with file|pattern=LEVEL,...")
}
}
// AddFlags adds flags for a specific SchedulerServer to the specified FlagSet
func (s *SchedulerServer) AddFlags(fs *pflag.FlagSet) {
fs.Int32Var(&s.Port, "port", s.Port, "The port that the scheduler's http service runs on")
fs.StringVar(&s.Address, "address", s.Address, "The IP address to serve on (set to 0.0.0.0 for all interfaces)")
fs.StringVar(&s.AlgorithmProvider, "algorithm-provider", s.AlgorithmProvider, "The scheduling algorithm provider to use, one of: "+factory.ListAlgorithmProviders())
fs.StringVar(&s.PolicyConfigFile, "policy-config-file", s.PolicyConfigFile, "File with scheduler policy configuration")
fs.BoolVar(&s.EnableProfiling, "profiling", true, "Enable profiling via web interface host:port/debug/pprof/")
fs.StringVar(&s.Master, "master", s.Master, "The address of the Kubernetes API server (overrides any value in kubeconfig)")
fs.StringVar(&s.Kubeconfig, "kubeconfig", s.Kubeconfig, "Path to kubeconfig file with authorization and master location information.")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "Content type of requests sent to apiserver.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.StringVar(&s.SchedulerName, "scheduler-name", s.SchedulerName, "Name of the scheduler, used to select which pods will be processed by this scheduler, based on pod's annotation with key 'scheduler.alpha.kubernetes.io/name'")
fs.IntVar(&s.HardPodAffinitySymmetricWeight, "hard-pod-affinity-symmetric-weight", api.DefaultHardPodAffinitySymmetricWeight,
"RequiredDuringScheduling affinity is not symmetric, but there is an implicit PreferredDuringScheduling affinity rule corresponding "+
"to every RequiredDuringScheduling affinity rule. --hard-pod-affinity-symmetric-weight represents the weight of implicit PreferredDuringScheduling affinity rule.")
fs.StringVar(&s.FailureDomains, "failure-domains", api.DefaultFailureDomains, "Indicate the \"all topologies\" set for an empty topologyKey when it's used for PreferredDuringScheduling pod anti-affinity.")
leaderelection.BindFlags(&s.LeaderElection, fs)
config.DefaultFeatureGate.AddFlag(fs)
}
// AddFlags adds flags for a specific SchedulerServer to the specified FlagSet
func (s *SchedulerServer) AddFlags(fs *pflag.FlagSet) {
fs.Int32Var(&s.Port, "port", s.Port, "The port that the scheduler's http service runs on")
fs.StringVar(&s.Address, "address", s.Address, "The IP address to serve on (set to 0.0.0.0 for all interfaces)")
fs.StringVar(&s.AlgorithmProvider, "algorithm-provider", s.AlgorithmProvider, "The scheduling algorithm provider to use, one of: "+factory.ListAlgorithmProviders())
fs.StringVar(&s.PolicyConfigFile, "policy-config-file", s.PolicyConfigFile, "File with scheduler policy configuration")
fs.BoolVar(&s.EnableProfiling, "profiling", true, "Enable profiling via web interface host:port/debug/pprof/")
fs.StringVar(&s.Master, "master", s.Master, "The address of the Kubernetes API server (overrides any value in kubeconfig)")
fs.StringVar(&s.Kubeconfig, "kubeconfig", s.Kubeconfig, "Path to kubeconfig file with authorization and master location information.")
var unusedBindPodsQPS float32
fs.Float32Var(&unusedBindPodsQPS, "bind-pods-qps", 0, "unused, use --kube-api-qps")
fs.MarkDeprecated("bind-pods-qps", "flag is unused and will be removed. Use kube-api-qps instead.")
var unusedBindPodsBurst int32
fs.Int32Var(&unusedBindPodsBurst, "bind-pods-burst", 0, "unused, use --kube-api-burst")
fs.MarkDeprecated("bind-pods-burst", "flag is unused and will be removed. Use kube-api-burst instead.")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "ContentType of requests sent to apiserver. Passing application/vnd.kubernetes.protobuf is an experimental feature now.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.StringVar(&s.SchedulerName, "scheduler-name", s.SchedulerName, "Name of the scheduler, used to select which pods will be processed by this scheduler, based on pod's annotation with key 'scheduler.alpha.kubernetes.io/name'")
leaderelection.BindFlags(&s.LeaderElection, fs)
}
// AddFlags adds flags for a specific KubeletServer to the specified FlagSet
func (s *KubeletServer) AddFlags(fs *pflag.FlagSet) {
fs.StringVar(&s.Config, "config", s.Config, "Path to the config file or directory of files")
fs.DurationVar(&s.SyncFrequency.Duration, "sync-frequency", s.SyncFrequency.Duration, "Max period between synchronizing running containers and config")
fs.DurationVar(&s.FileCheckFrequency.Duration, "file-check-frequency", s.FileCheckFrequency.Duration, "Duration between checking config files for new data")
fs.DurationVar(&s.HTTPCheckFrequency.Duration, "http-check-frequency", s.HTTPCheckFrequency.Duration, "Duration between checking http for new data")
fs.StringVar(&s.ManifestURL, "manifest-url", s.ManifestURL, "URL for accessing the container manifest")
fs.StringVar(&s.ManifestURLHeader, "manifest-url-header", s.ManifestURLHeader, "HTTP header to use when accessing the manifest URL, with the key separated from the value with a ':', as in 'key:value'")
fs.BoolVar(&s.EnableServer, "enable-server", s.EnableServer, "Enable the Kubelet's server")
fs.Var(componentconfig.IPVar{Val: &s.Address}, "address", "The IP address for the Kubelet to serve on (set to 0.0.0.0 for all interfaces)")
fs.UintVar(&s.Port, "port", s.Port, "The port for the Kubelet to serve on.")
fs.UintVar(&s.ReadOnlyPort, "read-only-port", s.ReadOnlyPort, "The read-only port for the Kubelet to serve on with no authentication/authorization (set to 0 to disable)")
fs.StringVar(&s.TLSCertFile, "tls-cert-file", s.TLSCertFile, ""+
"File containing x509 Certificate for HTTPS. (CA cert, if any, concatenated after server cert). "+
"If --tls-cert-file and --tls-private-key-file are not provided, a self-signed certificate and key "+
"are generated for the public address and saved to the directory passed to --cert-dir.")
fs.StringVar(&s.TLSPrivateKeyFile, "tls-private-key-file", s.TLSPrivateKeyFile, "File containing x509 private key matching --tls-cert-file.")
fs.StringVar(&s.CertDirectory, "cert-dir", s.CertDirectory, "The directory where the TLS certs are located (by default /var/run/kubernetes). "+
"If --tls-cert-file and --tls-private-key-file are provided, this flag will be ignored.")
fs.StringVar(&s.HostnameOverride, "hostname-override", s.HostnameOverride, "If non-empty, will use this string as identification instead of the actual hostname.")
fs.StringVar(&s.PodInfraContainerImage, "pod-infra-container-image", s.PodInfraContainerImage, "The image whose network/ipc namespaces containers in each pod will use.")
fs.StringVar(&s.DockerEndpoint, "docker-endpoint", s.DockerEndpoint, "If non-empty, use this for the docker endpoint to communicate with")
fs.StringVar(&s.RootDirectory, "root-dir", s.RootDirectory, "Directory path for managing kubelet files (volume mounts,etc).")
fs.StringVar(&s.SeccompProfileRoot, "seccomp-profile-root", s.SeccompProfileRoot, "Directory path for seccomp profiles.")
fs.BoolVar(&s.AllowPrivileged, "allow-privileged", s.AllowPrivileged, "If true, allow containers to request privileged mode. [default=false]")
fs.StringVar(&s.HostNetworkSources, "host-network-sources", s.HostNetworkSources, "Comma-separated list of sources from which the Kubelet allows pods to use of host network. [default=\"*\"]")
fs.StringVar(&s.HostPIDSources, "host-pid-sources", s.HostPIDSources, "Comma-separated list of sources from which the Kubelet allows pods to use the host pid namespace. [default=\"*\"]")
fs.StringVar(&s.HostIPCSources, "host-ipc-sources", s.HostIPCSources, "Comma-separated list of sources from which the Kubelet allows pods to use the host ipc namespace. [default=\"*\"]")
fs.Float64Var(&s.RegistryPullQPS, "registry-qps", s.RegistryPullQPS, "If > 0, limit registry pull QPS to this value. If 0, unlimited. [default=5.0]")
fs.Int32Var(&s.RegistryBurst, "registry-burst", s.RegistryBurst, "Maximum size of a bursty pulls, temporarily allows pulls to burst to this number, while still not exceeding registry-qps. Only used if --registry-qps > 0")
fs.Float32Var(&s.EventRecordQPS, "event-qps", s.EventRecordQPS, "If > 0, limit event creations per second to this value. If 0, unlimited.")
fs.Int32Var(&s.EventBurst, "event-burst", s.EventBurst, "Maximum size of a bursty event records, temporarily allows event records to burst to this number, while still not exceeding event-qps. Only used if --event-qps > 0")
fs.BoolVar(&s.RunOnce, "runonce", s.RunOnce, "If true, exit after spawning pods from local manifests or remote urls. Exclusive with --api-servers, and --enable-server")
fs.BoolVar(&s.EnableDebuggingHandlers, "enable-debugging-handlers", s.EnableDebuggingHandlers, "Enables server endpoints for log collection and local running of containers and commands")
fs.DurationVar(&s.MinimumGCAge.Duration, "minimum-container-ttl-duration", s.MinimumGCAge.Duration, "Minimum age for a finished container before it is garbage collected. Examples: '300ms', '10s' or '2h45m'")
fs.Int32Var(&s.MaxPerPodContainerCount, "maximum-dead-containers-per-container", s.MaxPerPodContainerCount, "Maximum number of old instances to retain per container. Each container takes up some disk space. Default: 2.")
fs.Int32Var(&s.MaxContainerCount, "maximum-dead-containers", s.MaxContainerCount, "Maximum number of old instances of containers to retain globally. Each container takes up some disk space. Default: 100.")
fs.Var(&s.AuthPath, "auth-path", "Path to .kubernetes_auth file, specifying how to authenticate to API server.")
fs.MarkDeprecated("auth-path", "will be removed in a future version")
fs.Var(&s.KubeConfig, "kubeconfig", "Path to a kubeconfig file, specifying how to authenticate to API server (the master location is set by the api-servers flag).")
fs.UintVar(&s.CAdvisorPort, "cadvisor-port", s.CAdvisorPort, "The port of the localhost cAdvisor endpoint")
fs.Int32Var(&s.HealthzPort, "healthz-port", s.HealthzPort, "The port of the localhost healthz endpoint")
fs.Var(componentconfig.IPVar{Val: &s.HealthzBindAddress}, "healthz-bind-address", "The IP address for the healthz server to serve on, defaulting to 127.0.0.1 (set to 0.0.0.0 for all interfaces)")
fs.Int32Var(&s.OOMScoreAdj, "oom-score-adj", s.OOMScoreAdj, "The oom-score-adj value for kubelet process. Values must be within the range [-1000, 1000]")
fs.StringSliceVar(&s.APIServerList, "api-servers", []string{}, "List of Kubernetes API servers for publishing events, and reading pods and services. (ip:port), comma separated.")
fs.BoolVar(&s.RegisterNode, "register-node", s.RegisterNode, "Register the node with the apiserver (defaults to true if --api-servers is set)")
fs.StringVar(&s.ClusterDomain, "cluster-domain", s.ClusterDomain, "Domain for this cluster. If set, kubelet will configure all containers to search this domain in addition to the host's search domains")
fs.StringVar(&s.MasterServiceNamespace, "master-service-namespace", s.MasterServiceNamespace, "The namespace from which the kubernetes master services should be injected into pods")
fs.StringVar(&s.ClusterDNS, "cluster-dns", s.ClusterDNS, "IP address for a cluster DNS server. This value is used for containers' DNS server in case of Pods with \"dnsPolicy=ClusterFirst\"")
fs.DurationVar(&s.StreamingConnectionIdleTimeout.Duration, "streaming-connection-idle-timeout", s.StreamingConnectionIdleTimeout.Duration, "Maximum time a streaming connection can be idle before the connection is automatically closed. 0 indicates no timeout. Example: '5m'")
fs.DurationVar(&s.NodeStatusUpdateFrequency.Duration, "node-status-update-frequency", s.NodeStatusUpdateFrequency.Duration, "Specifies how often kubelet posts node status to master. Note: be cautious when changing the constant, it must work with nodeMonitorGracePeriod in nodecontroller. Default: 10s")
bindableNodeLabels := config.ConfigurationMap(s.NodeLabels)
fs.Var(&bindableNodeLabels, "node-labels", "<Warning: Alpha feature> Labels to add when registering the node in the cluster. Labels must be key=value pairs separated by ','.")
fs.DurationVar(&s.ImageMinimumGCAge.Duration, "minimum-image-ttl-duration", s.ImageMinimumGCAge.Duration, "Minimum age for a unused image before it is garbage collected. Examples: '300ms', '10s' or '2h45m'. Default: '2m'")
fs.Int32Var(&s.ImageGCHighThresholdPercent, "image-gc-high-threshold", s.ImageGCHighThresholdPercent, "The percent of disk usage after which image garbage collection is always run. Default: 90%")
fs.Int32Var(&s.ImageGCLowThresholdPercent, "image-gc-low-threshold", s.ImageGCLowThresholdPercent, "The percent of disk usage before which image garbage collection is never run. Lowest disk usage to garbage collect to. Default: 80%")
fs.Int32Var(&s.LowDiskSpaceThresholdMB, "low-diskspace-threshold-mb", s.LowDiskSpaceThresholdMB, "The absolute free disk space, in MB, to maintain. When disk space falls below this threshold, new pods would be rejected. Default: 256")
fs.DurationVar(&s.VolumeStatsAggPeriod.Duration, "volume-stats-agg-period", s.VolumeStatsAggPeriod.Duration, "Specifies interval for kubelet to calculate and cache the volume disk usage for all pods and volumes. To disable volume calculations, set to 0. Default: '1m'")
fs.StringVar(&s.NetworkPluginName, "network-plugin", s.NetworkPluginName, "<Warning: Alpha feature> The name of the network plugin to be invoked for various events in kubelet/pod lifecycle")
fs.StringVar(&s.NetworkPluginDir, "network-plugin-dir", s.NetworkPluginDir, "<Warning: Alpha feature> The full path of the directory in which to search for network plugins")
fs.StringVar(&s.VolumePluginDir, "volume-plugin-dir", s.VolumePluginDir, "<Warning: Alpha feature> The full path of the directory in which to search for additional third party volume plugins")
fs.StringVar(&s.CloudProvider, "cloud-provider", s.CloudProvider, "The provider for cloud services. Empty string for no provider.")
fs.StringVar(&s.CloudConfigFile, "cloud-config", s.CloudConfigFile, "The path to the cloud provider configuration file. Empty string for no configuration file.")
fs.StringVar(&s.KubeletCgroups, "resource-container", s.KubeletCgroups, "Optional absolute name of the resource-only container to create and run the Kubelet in.")
fs.MarkDeprecated("resource-container", "Use --kubelet-cgroups instead. Will be removed in a future version.")
fs.StringVar(&s.KubeletCgroups, "kubelet-cgroups", s.KubeletCgroups, "Optional absolute name of cgroups to create and run the Kubelet in.")
fs.StringVar(&s.SystemCgroups, "system-container", s.SystemCgroups, "Optional resource-only container in which to place all non-kernel processes that are not already in a container. Empty for no container. Rolling back the flag requires a reboot. (Default: \"\").")
fs.MarkDeprecated("system-container", "Use --system-cgroups instead. Will be removed in a future version.")
fs.StringVar(&s.SystemCgroups, "system-cgroups", s.SystemCgroups, "Optional absolute name of cgroups in which to place all non-kernel processes that are not already inside a cgroup under `/`. Empty for no container. Rolling back the flag requires a reboot. (Default: \"\").")
fs.StringVar(&s.CgroupRoot, "cgroup-root", s.CgroupRoot, "Optional root cgroup to use for pods. This is handled by the container runtime on a best effort basis. Default: '', which means use the container runtime default.")
fs.StringVar(&s.ContainerRuntime, "container-runtime", s.ContainerRuntime, "The container runtime to use. Possible values: 'docker', 'rkt'. Default: 'docker'.")
fs.StringVar(&s.LockFilePath, "lock-file", s.LockFilePath, "<Warning: Alpha feature> The path to file for kubelet to use as a lock file.")
fs.BoolVar(&s.ExitOnLockContention, "exit-on-lock-contention", s.ExitOnLockContention, "Whether kubelet should exit upon lock-file contention.")
fs.StringVar(&s.RktPath, "rkt-path", s.RktPath, "Path of rkt binary. Leave empty to use the first rkt in $PATH. Only used if --container-runtime='rkt'.")
fs.StringVar(&s.RktAPIEndpoint, "rkt-api-endpoint", s.RktAPIEndpoint, "The endpoint of the rkt API service to communicate with. Only used if --container-runtime='rkt'.")
fs.StringVar(&s.RktStage1Image, "rkt-stage1-image", s.RktStage1Image, "image to use as stage1. Local paths and http/https URLs are supported. If empty, the 'stage1.aci' in the same directory as '--rkt-path' will be used.")
fs.MarkDeprecated("rkt-stage1-image", "Will be removed in a future version. The default stage1 image will be specified by the rkt configurations, see https://github.com/coreos/rkt/blob/master/Documentation/configuration.md for more details.")
fs.BoolVar(&s.ConfigureCBR0, "configure-cbr0", s.ConfigureCBR0, "If true, kubelet will configure cbr0 based on Node.Spec.PodCIDR.")
fs.StringVar(&s.HairpinMode, "hairpin-mode", s.HairpinMode, "How should the kubelet setup hairpin NAT. This allows endpoints of a Service to loadbalance back to themselves if they should try to access their own Service. Valid values are \"promiscuous-bridge\", \"hairpin-veth\" and \"none\".")
fs.BoolVar(&s.BabysitDaemons, "babysit-daemons", s.BabysitDaemons, "If true, the node has babysitter process monitoring docker and kubelet.")
fs.MarkDeprecated("babysit-daemons", "Will be removed in a future version.")
fs.Int32Var(&s.MaxPods, "max-pods", s.MaxPods, "Number of Pods that can run on this Kubelet.")
fs.Int32Var(&s.NvidiaGPUs, "experimental-nvidia-gpus", s.NvidiaGPUs, "Number of NVIDIA GPU devices on this node. Only 0 (default) and 1 are currently supported.")
fs.StringVar(&s.DockerExecHandlerName, "docker-exec-handler", s.DockerExecHandlerName, "Handler to use when executing a command in a container. Valid values are 'native' and 'nsenter'. Defaults to 'native'.")
fs.StringVar(&s.NonMasqueradeCIDR, "non-masquerade-cidr", s.NonMasqueradeCIDR, "Traffic to IPs outside this range will use IP masquerade.")
fs.StringVar(&s.PodCIDR, "pod-cidr", "", "The CIDR to use for pod IP addresses, only used in standalone mode. In cluster mode, this is obtained from the master.")
fs.StringVar(&s.ResolverConfig, "resolv-conf", s.ResolverConfig, "Resolver configuration file used as the basis for the container DNS resolution configuration.")
fs.BoolVar(&s.CPUCFSQuota, "cpu-cfs-quota", s.CPUCFSQuota, "Enable CPU CFS quota enforcement for containers that specify CPU limits")
// Flags intended for testing, not recommended used in production environments.
fs.BoolVar(&s.ReallyCrashForTesting, "really-crash-for-testing", s.ReallyCrashForTesting, "If true, when panics occur crash. Intended for testing.")
fs.Float64Var(&s.ChaosChance, "chaos-chance", s.ChaosChance, "If > 0.0, introduce random client errors and latency. Intended for testing. [default=0.0]")
fs.BoolVar(&s.Containerized, "containerized", s.Containerized, "Experimental support for running kubelet in a container. Intended for testing. [default=false]")
fs.Uint64Var(&s.MaxOpenFiles, "max-open-files", s.MaxOpenFiles, "Number of files that can be opened by Kubelet process. [default=1000000]")
fs.BoolVar(&s.ReconcileCIDR, "reconcile-cidr", s.ReconcileCIDR, "Reconcile node CIDR with the CIDR specified by the API server. No-op if register-node or configure-cbr0 is false. [default=true]")
fs.Var(&s.SystemReserved, "system-reserved", "A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for non-kubernetes components. Currently only cpu and memory are supported. See http://releases.k8s.io/HEAD/docs/user-guide/compute-resources.md for more detail. [default=none]")
fs.Var(&s.KubeReserved, "kube-reserved", "A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for kubernetes system components. Currently only cpu and memory are supported. See http://releases.k8s.io/HEAD/docs/user-guide/compute-resources.md for more detail. [default=none]")
fs.BoolVar(&s.RegisterSchedulable, "register-schedulable", s.RegisterSchedulable, "Register the node as schedulable. No-op if register-node is false. [default=true]")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "Content type of requests sent to apiserver.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.BoolVar(&s.SerializeImagePulls, "serialize-image-pulls", s.SerializeImagePulls, "Pull images one at a time. We recommend *not* changing the default value on nodes that run docker daemon with version < 1.9 or an Aufs storage backend. Issue #10959 has more details. [default=true]")
fs.BoolVar(&s.ExperimentalFlannelOverlay, "experimental-flannel-overlay", s.ExperimentalFlannelOverlay, "Experimental support for starting the kubelet with the default overlay network (flannel). Assumes flanneld is already running in client mode. [default=false]")
fs.DurationVar(&s.OutOfDiskTransitionFrequency.Duration, "outofdisk-transition-frequency", s.OutOfDiskTransitionFrequency.Duration, "Duration for which the kubelet has to wait before transitioning out of out-of-disk node condition status. Default: 5m0s")
fs.StringVar(&s.NodeIP, "node-ip", s.NodeIP, "IP address of the node. If set, kubelet will use this IP address for the node")
fs.BoolVar(&s.EnableCustomMetrics, "enable-custom-metrics", s.EnableCustomMetrics, "Support for gathering custom metrics.")
fs.StringVar(&s.RuntimeCgroups, "runtime-cgroups", s.RuntimeCgroups, "Optional absolute name of cgroups to create and run the runtime in.")
fs.StringVar(&s.EvictionHard, "eviction-hard", s.EvictionHard, "A set of eviction thresholds (e.g. memory.available<1Gi) that if met would trigger a pod eviction.")
fs.StringVar(&s.EvictionSoft, "eviction-soft", s.EvictionSoft, "A set of eviction thresholds (e.g. memory.available<1.5Gi) that if met over a corresponding grace period would trigger a pod eviction.")
fs.StringVar(&s.EvictionSoftGracePeriod, "eviction-soft-grace-period", s.EvictionSoftGracePeriod, "A set of eviction grace periods (e.g. memory.available=1m30s) that correspond to how long a soft eviction threshold must hold before triggering a pod eviction.")
fs.DurationVar(&s.EvictionPressureTransitionPeriod.Duration, "eviction-pressure-transition-period", s.EvictionPressureTransitionPeriod.Duration, "Duration for which the kubelet has to wait before transitioning out of an eviction pressure condition.")
fs.Int32Var(&s.EvictionMaxPodGracePeriod, "eviction-max-pod-grace-period", s.EvictionMaxPodGracePeriod, "Maximum allowed grace period (in seconds) to use when terminating pods in response to a soft eviction threshold being met. If negative, defer to pod specified value.")
fs.Int32Var(&s.PodsPerCore, "pods-per-core", s.PodsPerCore, "Number of Pods per core that can run on this Kubelet. The total number of Pods on this Kubelet cannot exceed max-pods, so max-pods will be used if this caulcation results in a larger number of Pods allowed on the Kubelet. A value of 0 disables this limit.")
}
func (ms *MinionServer) AddExecutorFlags(fs *pflag.FlagSet) {
ms.KubeletExecutorServer.AddFlags(fs)
// hack to forward log verbosity flag to the executor
fs.Int32Var(&ms.logVerbosity, "v", ms.logVerbosity, "log level for V logs")
}
// AddFlags adds flags for a specific KubeletServer to the specified FlagSet
func (s *KubeletServer) AddFlags(fs *pflag.FlagSet) {
// TODO(#34726:1.8.0): Remove the opt-in for failing when swap is enabled.
fs.BoolVar(&s.ExperimentalFailSwapOn, "experimental-fail-swap-on", s.ExperimentalFailSwapOn, "Makes the Kubelet fail to start if swap is enabled on the node. This is a temporary opton to maintain legacy behavior, failing due to swap enabled will happen by default in v1.6.")
fs.Var(&s.KubeConfig, "kubeconfig", "Path to a kubeconfig file, specifying how to connect to the API server. --api-servers will be used for the location unless --require-kubeconfig is set.")
fs.BoolVar(&s.RequireKubeConfig, "require-kubeconfig", s.RequireKubeConfig, "If true the Kubelet will exit if there are configuration errors, and will ignore the value of --api-servers in favor of the server defined in the kubeconfig file.")
// DEPRECATED: Remove these flags at the beginning of 1.5.
fs.Var(&s.AuthPath, "auth-path", "Path to .kubernetes_auth file, specifying how to authenticate to API server.")
fs.MarkDeprecated("auth-path", "will be removed in a future version")
fs.StringSliceVar(&s.APIServerList, "api-servers", []string{}, "List of Kubernetes API servers for publishing events, and reading pods and services. (ip:port), comma separated.")
fs.MarkDeprecated("api-servers", "Use --kubeconfig instead. Will be removed in a future version.")
fs.StringVar(&s.PodManifestPath, "config", s.PodManifestPath, "Path to to the directory containing pod manifest files to run, or the path to a single pod manifest file.")
fs.MarkDeprecated("config", "Use --pod-manifest-path instead. Will be removed in a future version.")
fs.StringVar(&s.PodManifestPath, "pod-manifest-path", s.PodManifestPath, "Path to to the directory containing pod manifest files to run, or the path to a single pod manifest file.")
fs.DurationVar(&s.SyncFrequency.Duration, "sync-frequency", s.SyncFrequency.Duration, "Max period between synchronizing running containers and config")
fs.DurationVar(&s.FileCheckFrequency.Duration, "file-check-frequency", s.FileCheckFrequency.Duration, "Duration between checking config files for new data")
fs.DurationVar(&s.HTTPCheckFrequency.Duration, "http-check-frequency", s.HTTPCheckFrequency.Duration, "Duration between checking http for new data")
fs.StringVar(&s.ManifestURL, "manifest-url", s.ManifestURL, "URL for accessing the container manifest")
fs.StringVar(&s.ManifestURLHeader, "manifest-url-header", s.ManifestURLHeader, "HTTP header to use when accessing the manifest URL, with the key separated from the value with a ':', as in 'key:value'")
fs.BoolVar(&s.EnableServer, "enable-server", s.EnableServer, "Enable the Kubelet's server")
fs.Var(componentconfig.IPVar{Val: &s.Address}, "address", "The IP address for the Kubelet to serve on (set to 0.0.0.0 for all interfaces)")
fs.Int32Var(&s.Port, "port", s.Port, "The port for the Kubelet to serve on.")
fs.Int32Var(&s.ReadOnlyPort, "read-only-port", s.ReadOnlyPort, "The read-only port for the Kubelet to serve on with no authentication/authorization (set to 0 to disable)")
// Authentication
fs.BoolVar(&s.Authentication.Anonymous.Enabled, "anonymous-auth", s.Authentication.Anonymous.Enabled, ""+
"Enables anonymous requests to the Kubelet server. Requests that are not rejected by another "+
"authentication method are treated as anonymous requests. Anonymous requests have a username "+
"of system:anonymous, and a group name of system:unauthenticated.")
fs.BoolVar(&s.Authentication.Webhook.Enabled, "authentication-token-webhook", s.Authentication.Webhook.Enabled, ""+
"Use the TokenReview API to determine authentication for bearer tokens.")
fs.DurationVar(&s.Authentication.Webhook.CacheTTL.Duration, "authentication-token-webhook-cache-ttl", s.Authentication.Webhook.CacheTTL.Duration, ""+
"The duration to cache responses from the webhook token authenticator.")
fs.StringVar(&s.Authentication.X509.ClientCAFile, "client-ca-file", s.Authentication.X509.ClientCAFile, ""+
"If set, any request presenting a client certificate signed by one of the authorities in the client-ca-file "+
"is authenticated with an identity corresponding to the CommonName of the client certificate.")
// Authorization
fs.StringVar((*string)(&s.Authorization.Mode), "authorization-mode", string(s.Authorization.Mode), ""+
"Authorization mode for Kubelet server. Valid options are AlwaysAllow or Webhook. "+
"Webhook mode uses the SubjectAccessReview API to determine authorization.")
fs.DurationVar(&s.Authorization.Webhook.CacheAuthorizedTTL.Duration, "authorization-webhook-cache-authorized-ttl", s.Authorization.Webhook.CacheAuthorizedTTL.Duration, ""+
"The duration to cache 'authorized' responses from the webhook authorizer.")
fs.DurationVar(&s.Authorization.Webhook.CacheUnauthorizedTTL.Duration, "authorization-webhook-cache-unauthorized-ttl", s.Authorization.Webhook.CacheUnauthorizedTTL.Duration, ""+
"The duration to cache 'unauthorized' responses from the webhook authorizer.")
fs.StringVar(&s.TLSCertFile, "tls-cert-file", s.TLSCertFile, ""+
"File containing x509 Certificate for HTTPS. (CA cert, if any, concatenated after server cert). "+
"If --tls-cert-file and --tls-private-key-file are not provided, a self-signed certificate and key "+
"are generated for the public address and saved to the directory passed to --cert-dir.")
fs.StringVar(&s.TLSPrivateKeyFile, "tls-private-key-file", s.TLSPrivateKeyFile, "File containing x509 private key matching --tls-cert-file.")
fs.StringVar(&s.CertDirectory, "cert-dir", s.CertDirectory, "The directory where the TLS certs are located (by default /var/run/kubernetes). "+
"If --tls-cert-file and --tls-private-key-file are provided, this flag will be ignored.")
fs.StringVar(&s.BootstrapKubeconfig, "experimental-bootstrap-kubeconfig", s.BootstrapKubeconfig, "<Warning: Experimental feature> Path to a kubeconfig file that will be used to get client certificate for kubelet. "+
"If the file specified by --kubeconfig does not exist, the bootstrap kubeconfig is used to request a client certificate from the API server. "+
"On success, a kubeconfig file referencing the generated key and obtained certificate is written to the path specified by --kubeconfig. "+
"The certificate and key file will be stored in the directory pointed by --cert-dir.")
fs.StringVar(&s.HostnameOverride, "hostname-override", s.HostnameOverride, "If non-empty, will use this string as identification instead of the actual hostname.")
fs.StringVar(&s.PodInfraContainerImage, "pod-infra-container-image", s.PodInfraContainerImage, "The image whose network/ipc namespaces containers in each pod will use.")
fs.StringVar(&s.DockerEndpoint, "docker-endpoint", s.DockerEndpoint, "Use this for the docker endpoint to communicate with")
fs.StringVar(&s.RootDirectory, "root-dir", s.RootDirectory, "Directory path for managing kubelet files (volume mounts,etc).")
fs.StringVar(&s.SeccompProfileRoot, "seccomp-profile-root", s.SeccompProfileRoot, "Directory path for seccomp profiles.")
fs.BoolVar(&s.AllowPrivileged, "allow-privileged", s.AllowPrivileged, "If true, allow containers to request privileged mode. [default=false]")
fs.StringSliceVar(&s.HostNetworkSources, "host-network-sources", s.HostNetworkSources, "Comma-separated list of sources from which the Kubelet allows pods to use of host network. [default=\"*\"]")
fs.StringSliceVar(&s.HostPIDSources, "host-pid-sources", s.HostPIDSources, "Comma-separated list of sources from which the Kubelet allows pods to use the host pid namespace. [default=\"*\"]")
fs.StringSliceVar(&s.HostIPCSources, "host-ipc-sources", s.HostIPCSources, "Comma-separated list of sources from which the Kubelet allows pods to use the host ipc namespace. [default=\"*\"]")
fs.Int32Var(&s.RegistryPullQPS, "registry-qps", s.RegistryPullQPS, "If > 0, limit registry pull QPS to this value. If 0, unlimited. [default=5.0]")
fs.Int32Var(&s.RegistryBurst, "registry-burst", s.RegistryBurst, "Maximum size of a bursty pulls, temporarily allows pulls to burst to this number, while still not exceeding registry-qps. Only used if --registry-qps > 0")
fs.Int32Var(&s.EventRecordQPS, "event-qps", s.EventRecordQPS, "If > 0, limit event creations per second to this value. If 0, unlimited.")
fs.Int32Var(&s.EventBurst, "event-burst", s.EventBurst, "Maximum size of a bursty event records, temporarily allows event records to burst to this number, while still not exceeding event-qps. Only used if --event-qps > 0")
fs.BoolVar(&s.RunOnce, "runonce", s.RunOnce, "If true, exit after spawning pods from local manifests or remote urls. Exclusive with --api-servers, and --enable-server")
fs.BoolVar(&s.EnableDebuggingHandlers, "enable-debugging-handlers", s.EnableDebuggingHandlers, "Enables server endpoints for log collection and local running of containers and commands")
fs.DurationVar(&s.MinimumGCAge.Duration, "minimum-container-ttl-duration", s.MinimumGCAge.Duration, "Minimum age for a finished container before it is garbage collected. Examples: '300ms', '10s' or '2h45m'")
fs.MarkDeprecated("minimum-container-ttl-duration", "Use --eviction-hard or --eviction-soft instead. Will be removed in a future version.")
fs.Int32Var(&s.MaxPerPodContainerCount, "maximum-dead-containers-per-container", s.MaxPerPodContainerCount, "Maximum number of old instances to retain per container. Each container takes up some disk space. Default: 1.")
fs.MarkDeprecated("maximum-dead-containers-per-container", "Use --eviction-hard or --eviction-soft instead. Will be removed in a future version.")
fs.Int32Var(&s.MaxContainerCount, "maximum-dead-containers", s.MaxContainerCount, "Maximum number of old instances of containers to retain globally. Each container takes up some disk space. To disable, set to a negative number. Default: -1.")
fs.MarkDeprecated("maximum-dead-containers", "Use --eviction-hard or --eviction-soft instead. Will be removed in a future version.")
fs.Int32Var(&s.CAdvisorPort, "cadvisor-port", s.CAdvisorPort, "The port of the localhost cAdvisor endpoint")
fs.Int32Var(&s.HealthzPort, "healthz-port", s.HealthzPort, "The port of the localhost healthz endpoint")
fs.Var(componentconfig.IPVar{Val: &s.HealthzBindAddress}, "healthz-bind-address", "The IP address for the healthz server to serve on, defaulting to 127.0.0.1 (set to 0.0.0.0 for all interfaces)")
fs.Int32Var(&s.OOMScoreAdj, "oom-score-adj", s.OOMScoreAdj, "The oom-score-adj value for kubelet process. Values must be within the range [-1000, 1000]")
fs.BoolVar(&s.RegisterNode, "register-node", s.RegisterNode, "Register the node with the apiserver (defaults to true if --api-servers is set)")
fs.StringVar(&s.ClusterDomain, "cluster-domain", s.ClusterDomain, "Domain for this cluster. If set, kubelet will configure all containers to search this domain in addition to the host's search domains")
fs.StringVar(&s.MasterServiceNamespace, "master-service-namespace", s.MasterServiceNamespace, "The namespace from which the kubernetes master services should be injected into pods")
fs.StringVar(&s.ClusterDNS, "cluster-dns", s.ClusterDNS, "IP address for a cluster DNS server. This value is used for containers' DNS server in case of Pods with \"dnsPolicy=ClusterFirst\"")
fs.DurationVar(&s.StreamingConnectionIdleTimeout.Duration, "streaming-connection-idle-timeout", s.StreamingConnectionIdleTimeout.Duration, "Maximum time a streaming connection can be idle before the connection is automatically closed. 0 indicates no timeout. Example: '5m'")
fs.DurationVar(&s.NodeStatusUpdateFrequency.Duration, "node-status-update-frequency", s.NodeStatusUpdateFrequency.Duration, "Specifies how often kubelet posts node status to master. Note: be cautious when changing the constant, it must work with nodeMonitorGracePeriod in nodecontroller. Default: 10s")
s.NodeLabels = make(map[string]string)
bindableNodeLabels := utilconfig.ConfigurationMap(s.NodeLabels)
fs.Var(&bindableNodeLabels, "node-labels", "<Warning: Alpha feature> Labels to add when registering the node in the cluster. Labels must be key=value pairs separated by ','.")
fs.DurationVar(&s.ImageMinimumGCAge.Duration, "minimum-image-ttl-duration", s.ImageMinimumGCAge.Duration, "Minimum age for an unused image before it is garbage collected. Examples: '300ms', '10s' or '2h45m'. Default: '2m'")
fs.Int32Var(&s.ImageGCHighThresholdPercent, "image-gc-high-threshold", s.ImageGCHighThresholdPercent, "The percent of disk usage after which image garbage collection is always run. Default: 90%")
fs.Int32Var(&s.ImageGCLowThresholdPercent, "image-gc-low-threshold", s.ImageGCLowThresholdPercent, "The percent of disk usage before which image garbage collection is never run. Lowest disk usage to garbage collect to. Default: 80%")
fs.Int32Var(&s.LowDiskSpaceThresholdMB, "low-diskspace-threshold-mb", s.LowDiskSpaceThresholdMB, "The absolute free disk space, in MB, to maintain. When disk space falls below this threshold, new pods would be rejected. Default: 256")
fs.DurationVar(&s.VolumeStatsAggPeriod.Duration, "volume-stats-agg-period", s.VolumeStatsAggPeriod.Duration, "Specifies interval for kubelet to calculate and cache the volume disk usage for all pods and volumes. To disable volume calculations, set to 0. Default: '1m'")
fs.StringVar(&s.NetworkPluginName, "network-plugin", s.NetworkPluginName, "<Warning: Alpha feature> The name of the network plugin to be invoked for various events in kubelet/pod lifecycle")
fs.StringVar(&s.NetworkPluginDir, "network-plugin-dir", s.NetworkPluginDir, "<Warning: Alpha feature> The full path of the directory in which to search for network plugins or CNI config")
fs.StringVar(&s.CNIConfDir, "cni-conf-dir", s.CNIConfDir, "<Warning: Alpha feature> The full path of the directory in which to search for CNI config files. Default: /etc/cni/net.d")
fs.StringVar(&s.CNIBinDir, "cni-bin-dir", s.CNIBinDir, "<Warning: Alpha feature> The full path of the directory in which to search for CNI plugin binaries. Default: /opt/cni/bin")
fs.Int32Var(&s.NetworkPluginMTU, "network-plugin-mtu", s.NetworkPluginMTU, "<Warning: Alpha feature> The MTU to be passed to the network plugin, to override the default. Set to 0 to use the default 1460 MTU.")
fs.StringVar(&s.VolumePluginDir, "volume-plugin-dir", s.VolumePluginDir, "<Warning: Alpha feature> The full path of the directory in which to search for additional third party volume plugins")
fs.StringVar(&s.CloudProvider, "cloud-provider", s.CloudProvider, "The provider for cloud services. By default, kubelet will attempt to auto-detect the cloud provider. Specify empty string for running with no cloud provider. [default=auto-detect]")
fs.StringVar(&s.CloudConfigFile, "cloud-config", s.CloudConfigFile, "The path to the cloud provider configuration file. Empty string for no configuration file.")
fs.StringVar(&s.FeatureGates, "feature-gates", s.FeatureGates, "A set of key=value pairs that describe feature gates for alpha/experimental features. "+
"Options are:\n"+strings.Join(utilconfig.DefaultFeatureGate.KnownFeatures(), "\n"))
fs.StringVar(&s.KubeletCgroups, "resource-container", s.KubeletCgroups, "Optional absolute name of the resource-only container to create and run the Kubelet in.")
fs.MarkDeprecated("resource-container", "Use --kubelet-cgroups instead. Will be removed in a future version.")
fs.StringVar(&s.KubeletCgroups, "kubelet-cgroups", s.KubeletCgroups, "Optional absolute name of cgroups to create and run the Kubelet in.")
fs.StringVar(&s.SystemCgroups, "system-container", s.SystemCgroups, "Optional resource-only container in which to place all non-kernel processes that are not already in a container. Empty for no container. Rolling back the flag requires a reboot. (Default: \"\").")
fs.MarkDeprecated("system-container", "Use --system-cgroups instead. Will be removed in a future version.")
fs.StringVar(&s.SystemCgroups, "system-cgroups", s.SystemCgroups, "Optional absolute name of cgroups in which to place all non-kernel processes that are not already inside a cgroup under `/`. Empty for no container. Rolling back the flag requires a reboot. (Default: \"\").")
fs.BoolVar(&s.ExperimentalCgroupsPerQOS, "experimental-cgroups-per-qos", s.ExperimentalCgroupsPerQOS, "Enable creation of QoS cgroup hierarchy, if true top level QoS and pod cgroups are created.")
fs.StringVar(&s.CgroupDriver, "cgroup-driver", s.CgroupDriver, "Driver that the kubelet uses to manipulate cgroups on the host. Possible values: 'cgroupfs', 'systemd'")
fs.StringVar(&s.CgroupRoot, "cgroup-root", s.CgroupRoot, "Optional root cgroup to use for pods. This is handled by the container runtime on a best effort basis. Default: '', which means use the container runtime default.")
fs.StringVar(&s.ContainerRuntime, "container-runtime", s.ContainerRuntime, "The container runtime to use. Possible values: 'docker', 'rkt'. Default: 'docker'.")
fs.DurationVar(&s.RuntimeRequestTimeout.Duration, "runtime-request-timeout", s.RuntimeRequestTimeout.Duration, "Timeout of all runtime requests except long running request - pull, logs, exec and attach. When timeout exceeded, kubelet will cancel the request, throw out an error and retry later. Default: 2m0s")
fs.StringVar(&s.LockFilePath, "lock-file", s.LockFilePath, "<Warning: Alpha feature> The path to file for kubelet to use as a lock file.")
fs.BoolVar(&s.ExitOnLockContention, "exit-on-lock-contention", s.ExitOnLockContention, "Whether kubelet should exit upon lock-file contention.")
fs.StringVar(&s.RktPath, "rkt-path", s.RktPath, "Path of rkt binary. Leave empty to use the first rkt in $PATH. Only used if --container-runtime='rkt'.")
fs.StringVar(&s.ExperimentalMounterPath, "experimental-mounter-path", s.ExperimentalMounterPath, "[Experimental] Path of mounter binary. Leave empty to use the default mount.")
fs.StringVar(&s.RktAPIEndpoint, "rkt-api-endpoint", s.RktAPIEndpoint, "The endpoint of the rkt API service to communicate with. Only used if --container-runtime='rkt'.")
fs.StringVar(&s.RktStage1Image, "rkt-stage1-image", s.RktStage1Image, "image to use as stage1. Local paths and http/https URLs are supported. If empty, the 'stage1.aci' in the same directory as '--rkt-path' will be used.")
fs.MarkDeprecated("rkt-stage1-image", "Will be removed in a future version. The default stage1 image will be specified by the rkt configurations, see https://github.com/coreos/rkt/blob/master/Documentation/configuration.md for more details.")
fs.StringVar(&s.HairpinMode, "hairpin-mode", s.HairpinMode, "How should the kubelet setup hairpin NAT. This allows endpoints of a Service to loadbalance back to themselves if they should try to access their own Service. Valid values are \"promiscuous-bridge\", \"hairpin-veth\" and \"none\".")
fs.BoolVar(&s.BabysitDaemons, "babysit-daemons", s.BabysitDaemons, "If true, the node has babysitter process monitoring docker and kubelet.")
fs.MarkDeprecated("babysit-daemons", "Will be removed in a future version.")
fs.Int32Var(&s.MaxPods, "max-pods", s.MaxPods, "Number of Pods that can run on this Kubelet.")
fs.Int32Var(&s.NvidiaGPUs, "experimental-nvidia-gpus", s.NvidiaGPUs, "Number of NVIDIA GPU devices on this node. Only 0 (default) and 1 are currently supported.")
fs.StringVar(&s.DockerExecHandlerName, "docker-exec-handler", s.DockerExecHandlerName, "Handler to use when executing a command in a container. Valid values are 'native' and 'nsenter'. Defaults to 'native'.")
fs.StringVar(&s.NonMasqueradeCIDR, "non-masquerade-cidr", s.NonMasqueradeCIDR, "Traffic to IPs outside this range will use IP masquerade.")
fs.StringVar(&s.PodCIDR, "pod-cidr", "", "The CIDR to use for pod IP addresses, only used in standalone mode. In cluster mode, this is obtained from the master.")
fs.StringVar(&s.ResolverConfig, "resolv-conf", s.ResolverConfig, "Resolver configuration file used as the basis for the container DNS resolution configuration.")
fs.BoolVar(&s.CPUCFSQuota, "cpu-cfs-quota", s.CPUCFSQuota, "Enable CPU CFS quota enforcement for containers that specify CPU limits")
fs.BoolVar(&s.EnableControllerAttachDetach, "enable-controller-attach-detach", s.EnableControllerAttachDetach, "Enables the Attach/Detach controller to manage attachment/detachment of volumes scheduled to this node, and disables kubelet from executing any attach/detach operations")
fs.BoolVar(&s.MakeIPTablesUtilChains, "make-iptables-util-chains", s.MakeIPTablesUtilChains, "If true, kubelet will ensure iptables utility rules are present on host.")
fs.Int32Var(&s.IPTablesMasqueradeBit, "iptables-masquerade-bit", s.IPTablesMasqueradeBit, "The bit of the fwmark space to mark packets for SNAT. Must be within the range [0, 31]. Please match this parameter with corresponding parameter in kube-proxy.")
fs.Int32Var(&s.IPTablesDropBit, "iptables-drop-bit", s.IPTablesDropBit, "The bit of the fwmark space to mark packets for dropping. Must be within the range [0, 31].")
fs.StringSliceVar(&s.AllowedUnsafeSysctls, "experimental-allowed-unsafe-sysctls", s.AllowedUnsafeSysctls, "Comma-separated whitelist of unsafe sysctls or unsafe sysctl patterns (ending in *). Use these at your own risk.")
// Flags intended for testing, not recommended used in production environments.
fs.BoolVar(&s.ReallyCrashForTesting, "really-crash-for-testing", s.ReallyCrashForTesting, "If true, when panics occur crash. Intended for testing.")
fs.Float64Var(&s.ChaosChance, "chaos-chance", s.ChaosChance, "If > 0.0, introduce random client errors and latency. Intended for testing. [default=0.0]")
fs.BoolVar(&s.Containerized, "containerized", s.Containerized, "Experimental support for running kubelet in a container. Intended for testing. [default=false]")
fs.Int64Var(&s.MaxOpenFiles, "max-open-files", s.MaxOpenFiles, "Number of files that can be opened by Kubelet process. [default=1000000]")
fs.BoolVar(&s.ReconcileCIDR, "reconcile-cidr", s.ReconcileCIDR, "Reconcile node CIDR with the CIDR specified by the API server. This flag has no function anymore.")
fs.MarkDeprecated("reconcile-cidr", "The old --configure-cbr0 networking mode has been removed, so this flag has no function anymore. Will be removed in v1.6.")
fs.Var(&s.SystemReserved, "system-reserved", "A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for non-kubernetes components. Currently only cpu and memory are supported. See http://kubernetes.io/docs/user-guide/compute-resources for more detail. [default=none]")
fs.Var(&s.KubeReserved, "kube-reserved", "A set of ResourceName=ResourceQuantity (e.g. cpu=200m,memory=150G) pairs that describe resources reserved for kubernetes system components. Currently only cpu and memory are supported. See http://kubernetes.io/docs/user-guide/compute-resources for more detail. [default=none]")
fs.BoolVar(&s.RegisterSchedulable, "register-schedulable", s.RegisterSchedulable, "Register the node as schedulable. Won't have any effect if register-node is false. [default=true]")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "Content type of requests sent to apiserver.")
fs.Int32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.BoolVar(&s.SerializeImagePulls, "serialize-image-pulls", s.SerializeImagePulls, "Pull images one at a time. We recommend *not* changing the default value on nodes that run docker daemon with version < 1.9 or an Aufs storage backend. Issue #10959 has more details. [default=true]")
fs.DurationVar(&s.OutOfDiskTransitionFrequency.Duration, "outofdisk-transition-frequency", s.OutOfDiskTransitionFrequency.Duration, "Duration for which the kubelet has to wait before transitioning out of out-of-disk node condition status. Default: 5m0s")
fs.StringVar(&s.NodeIP, "node-ip", s.NodeIP, "IP address of the node. If set, kubelet will use this IP address for the node")
fs.BoolVar(&s.EnableCustomMetrics, "enable-custom-metrics", s.EnableCustomMetrics, "Support for gathering custom metrics.")
fs.StringVar(&s.RuntimeCgroups, "runtime-cgroups", s.RuntimeCgroups, "Optional absolute name of cgroups to create and run the runtime in.")
fs.StringVar(&s.EvictionHard, "eviction-hard", s.EvictionHard, "A set of eviction thresholds (e.g. memory.available<1Gi) that if met would trigger a pod eviction.")
fs.StringVar(&s.EvictionSoft, "eviction-soft", s.EvictionSoft, "A set of eviction thresholds (e.g. memory.available<1.5Gi) that if met over a corresponding grace period would trigger a pod eviction.")
fs.StringVar(&s.EvictionSoftGracePeriod, "eviction-soft-grace-period", s.EvictionSoftGracePeriod, "A set of eviction grace periods (e.g. memory.available=1m30s) that correspond to how long a soft eviction threshold must hold before triggering a pod eviction.")
fs.DurationVar(&s.EvictionPressureTransitionPeriod.Duration, "eviction-pressure-transition-period", s.EvictionPressureTransitionPeriod.Duration, "Duration for which the kubelet has to wait before transitioning out of an eviction pressure condition.")
fs.Int32Var(&s.EvictionMaxPodGracePeriod, "eviction-max-pod-grace-period", s.EvictionMaxPodGracePeriod, "Maximum allowed grace period (in seconds) to use when terminating pods in response to a soft eviction threshold being met. If negative, defer to pod specified value.")
fs.StringVar(&s.EvictionMinimumReclaim, "eviction-minimum-reclaim", s.EvictionMinimumReclaim, "A set of minimum reclaims (e.g. imagefs.available=2Gi) that describes the minimum amount of resource the kubelet will reclaim when performing a pod eviction if that resource is under pressure.")
fs.Int32Var(&s.PodsPerCore, "pods-per-core", s.PodsPerCore, "Number of Pods per core that can run on this Kubelet. The total number of Pods on this Kubelet cannot exceed max-pods, so max-pods will be used if this calculation results in a larger number of Pods allowed on the Kubelet. A value of 0 disables this limit.")
fs.BoolVar(&s.ProtectKernelDefaults, "protect-kernel-defaults", s.ProtectKernelDefaults, "Default kubelet behaviour for kernel tuning. If set, kubelet errors if any of kernel tunables is different than kubelet defaults.")
// CRI flags.
fs.BoolVar(&s.EnableCRI, "experimental-cri", s.EnableCRI, "[Experimental] Enable the Container Runtime Interface (CRI) integration. If --container-runtime is set to \"remote\", Kubelet will communicate with the runtime/image CRI server listening on the endpoint specified by --remote-runtime-endpoint/--remote-image-endpoint. If --container-runtime is set to \"docker\", Kubelet will launch a in-process CRI server on behalf of docker, and communicate over a default endpoint.")
fs.StringVar(&s.RemoteRuntimeEndpoint, "container-runtime-endpoint", s.RemoteRuntimeEndpoint, "[Experimental] The unix socket endpoint of remote runtime service. The endpoint is used only when CRI integration is enabled (--experimental-cri)")
fs.StringVar(&s.RemoteImageEndpoint, "image-service-endpoint", s.RemoteImageEndpoint, "[Experimental] The unix socket endpoint of remote image service. If not specified, it will be the same with container-runtime-endpoint by default. The endpoint is used only when CRI integration is enabled (--experimental-cri)")
fs.BoolVar(&s.ExperimentalCheckNodeCapabilitiesBeforeMount, "experimental-check-node-capabilities-before-mount", s.ExperimentalCheckNodeCapabilitiesBeforeMount, "[Experimental] if set true, the kubelet will check the underlying node for required componenets (binaries, etc.) before performing the mount")
}
// AddFlags adds flags for a specific CMServer to the specified FlagSet
func (s *CMServer) AddFlags(fs *pflag.FlagSet) {
fs.Int32Var(&s.Port, "port", s.Port, "The port that the controller-manager's http service runs on")
fs.Var(componentconfig.IPVar{Val: &s.Address}, "address", "The IP address to serve on (set to 0.0.0.0 for all interfaces)")
fs.StringVar(&s.CloudProvider, "cloud-provider", s.CloudProvider, "The provider for cloud services. Empty string for no provider.")
fs.StringVar(&s.CloudConfigFile, "cloud-config", s.CloudConfigFile, "The path to the cloud provider configuration file. Empty string for no configuration file.")
fs.Int32Var(&s.ConcurrentEndpointSyncs, "concurrent-endpoint-syncs", s.ConcurrentEndpointSyncs, "The number of endpoint syncing operations that will be done concurrently. Larger number = faster endpoint updating, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentServiceSyncs, "concurrent-service-syncs", s.ConcurrentServiceSyncs, "The number of services that are allowed to sync concurrently. Larger number = more responsive service management, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentRCSyncs, "concurrent_rc_syncs", s.ConcurrentRCSyncs, "The number of replication controllers that are allowed to sync concurrently. Larger number = more responsive replica management, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentRSSyncs, "concurrent-replicaset-syncs", s.ConcurrentRSSyncs, "The number of replica sets that are allowed to sync concurrently. Larger number = more responsive replica management, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentResourceQuotaSyncs, "concurrent-resource-quota-syncs", s.ConcurrentResourceQuotaSyncs, "The number of resource quotas that are allowed to sync concurrently. Larger number = more responsive quota management, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentDeploymentSyncs, "concurrent-deployment-syncs", s.ConcurrentDeploymentSyncs, "The number of deployment objects that are allowed to sync concurrently. Larger number = more responsive deployments, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentNamespaceSyncs, "concurrent-namespace-syncs", s.ConcurrentNamespaceSyncs, "The number of namespace objects that are allowed to sync concurrently. Larger number = more responsive namespace termination, but more CPU (and network) load")
fs.Int32Var(&s.ConcurrentSATokenSyncs, "concurrent-serviceaccount-token-syncs", s.ConcurrentSATokenSyncs, "The number of service account token objects that are allowed to sync concurrently. Larger number = more responsive token generation, but more CPU (and network) load")
fs.Int32Var(&s.LookupCacheSizeForRC, "replication-controller-lookup-cache-size", s.LookupCacheSizeForRC, "The the size of lookup cache for replication controllers. Larger number = more responsive replica management, but more MEM load.")
fs.Int32Var(&s.LookupCacheSizeForRS, "replicaset-lookup-cache-size", s.LookupCacheSizeForRS, "The the size of lookup cache for replicatsets. Larger number = more responsive replica management, but more MEM load.")
fs.Int32Var(&s.LookupCacheSizeForDaemonSet, "daemonset-lookup-cache-size", s.LookupCacheSizeForDaemonSet, "The the size of lookup cache for daemonsets. Larger number = more responsive daemonsets, but more MEM load.")
fs.DurationVar(&s.ServiceSyncPeriod.Duration, "service-sync-period", s.ServiceSyncPeriod.Duration, "The period for syncing services with their external load balancers")
fs.DurationVar(&s.NodeSyncPeriod.Duration, "node-sync-period", s.NodeSyncPeriod.Duration, ""+
"The period for syncing nodes from cloudprovider. Longer periods will result in "+
"fewer calls to cloud provider, but may delay addition of new nodes to cluster.")
fs.DurationVar(&s.ResourceQuotaSyncPeriod.Duration, "resource-quota-sync-period", s.ResourceQuotaSyncPeriod.Duration, "The period for syncing quota usage status in the system")
fs.DurationVar(&s.NamespaceSyncPeriod.Duration, "namespace-sync-period", s.NamespaceSyncPeriod.Duration, "The period for syncing namespace life-cycle updates")
fs.DurationVar(&s.PVClaimBinderSyncPeriod.Duration, "pvclaimbinder-sync-period", s.PVClaimBinderSyncPeriod.Duration, "The period for syncing persistent volumes and persistent volume claims")
fs.DurationVar(&s.MinResyncPeriod.Duration, "min-resync-period", s.MinResyncPeriod.Duration, "The resync period in reflectors will be random between MinResyncPeriod and 2*MinResyncPeriod")
fs.StringVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathNFS, "pv-recycler-pod-template-filepath-nfs", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathNFS, "The file path to a pod definition used as a template for NFS persistent volume recycling")
fs.Int32Var(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutNFS, "pv-recycler-minimum-timeout-nfs", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutNFS, "The minimum ActiveDeadlineSeconds to use for an NFS Recycler pod")
fs.Int32Var(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutNFS, "pv-recycler-increment-timeout-nfs", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutNFS, "the increment of time added per Gi to ActiveDeadlineSeconds for an NFS scrubber pod")
fs.StringVar(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathHostPath, "pv-recycler-pod-template-filepath-hostpath", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.PodTemplateFilePathHostPath, "The file path to a pod definition used as a template for HostPath persistent volume recycling. This is for development and testing only and will not work in a multi-node cluster.")
fs.Int32Var(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutHostPath, "pv-recycler-minimum-timeout-hostpath", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.MinimumTimeoutHostPath, "The minimum ActiveDeadlineSeconds to use for a HostPath Recycler pod. This is for development and testing only and will not work in a multi-node cluster.")
fs.Int32Var(&s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutHostPath, "pv-recycler-timeout-increment-hostpath", s.VolumeConfiguration.PersistentVolumeRecyclerConfiguration.IncrementTimeoutHostPath, "the increment of time added per Gi to ActiveDeadlineSeconds for a HostPath scrubber pod. This is for development and testing only and will not work in a multi-node cluster.")
fs.BoolVar(&s.VolumeConfiguration.EnableHostPathProvisioning, "enable-hostpath-provisioner", s.VolumeConfiguration.EnableHostPathProvisioning, "Enable HostPath PV provisioning when running without a cloud provider. This allows testing and development of provisioning features. HostPath provisioning is not supported in any way, won't work in a multi-node cluster, and should not be used for anything other than testing or development.")
fs.BoolVar(&s.VolumeConfiguration.EnableDynamicProvisioning, "enable-dynamic-provisioning", s.VolumeConfiguration.EnableDynamicProvisioning, "Enable dynamic provisioning for environments that support it.")
fs.StringVar(&s.VolumeConfiguration.FlexVolumePluginDir, "flex-volume-plugin-dir", s.VolumeConfiguration.FlexVolumePluginDir, "Full path of the directory in which the flex volume plugin should search for additional third party volume plugins.")
fs.Int32Var(&s.TerminatedPodGCThreshold, "terminated-pod-gc-threshold", s.TerminatedPodGCThreshold, "Number of terminated pods that can exist before the terminated pod garbage collector starts deleting terminated pods. If <= 0, the terminated pod garbage collector is disabled.")
fs.DurationVar(&s.HorizontalPodAutoscalerSyncPeriod.Duration, "horizontal-pod-autoscaler-sync-period", s.HorizontalPodAutoscalerSyncPeriod.Duration, "The period for syncing the number of pods in horizontal pod autoscaler.")
fs.DurationVar(&s.DeploymentControllerSyncPeriod.Duration, "deployment-controller-sync-period", s.DeploymentControllerSyncPeriod.Duration, "Period for syncing the deployments.")
fs.DurationVar(&s.PodEvictionTimeout.Duration, "pod-eviction-timeout", s.PodEvictionTimeout.Duration, "The grace period for deleting pods on failed nodes.")
fs.Float32Var(&s.DeletingPodsQps, "deleting-pods-qps", 0.1, "Number of nodes per second on which pods are deleted in case of node failure.")
fs.MarkDeprecated("deleting-pods-qps", "This flag is currently no-op and will be deleted.")
fs.Int32Var(&s.DeletingPodsBurst, "deleting-pods-burst", 0, "Number of nodes on which pods are bursty deleted in case of node failure. For more details look into RateLimiter.")
fs.MarkDeprecated("deleting-pods-burst", "This flag is currently no-op and will be deleted.")
fs.Int32Var(&s.RegisterRetryCount, "register-retry-count", s.RegisterRetryCount, ""+
"The number of retries for initial node registration. Retry interval equals node-sync-period.")
fs.MarkDeprecated("register-retry-count", "This flag is currently no-op and will be deleted.")
fs.DurationVar(&s.NodeMonitorGracePeriod.Duration, "node-monitor-grace-period", s.NodeMonitorGracePeriod.Duration,
"Amount of time which we allow running Node to be unresponsive before marking it unhealthy. "+
"Must be N times more than kubelet's nodeStatusUpdateFrequency, "+
"where N means number of retries allowed for kubelet to post node status.")
fs.DurationVar(&s.NodeStartupGracePeriod.Duration, "node-startup-grace-period", s.NodeStartupGracePeriod.Duration,
"Amount of time which we allow starting Node to be unresponsive before marking it unhealthy.")
fs.DurationVar(&s.NodeMonitorPeriod.Duration, "node-monitor-period", s.NodeMonitorPeriod.Duration,
"The period for syncing NodeStatus in NodeController.")
fs.StringVar(&s.ServiceAccountKeyFile, "service-account-private-key-file", s.ServiceAccountKeyFile, "Filename containing a PEM-encoded private RSA key used to sign service account tokens.")
fs.StringVar(&s.ClusterSigningCertFile, "cluster-signing-cert-file", s.ClusterSigningCertFile, "Filename containing a PEM-encoded X509 CA certificate used to issue cluster-scoped certificates")
fs.StringVar(&s.ClusterSigningKeyFile, "cluster-signing-key-file", s.ClusterSigningKeyFile, "Filename containing a PEM-encoded RSA or ECDSA private key used to sign cluster-scoped certificates")
fs.StringVar(&s.ApproveAllKubeletCSRsForGroup, "insecure-experimental-approve-all-kubelet-csrs-for-group", s.ApproveAllKubeletCSRsForGroup, "The group for which the controller-manager will auto approve all CSRs for kubelet client certificates.")
fs.BoolVar(&s.EnableProfiling, "profiling", true, "Enable profiling via web interface host:port/debug/pprof/")
fs.StringVar(&s.ClusterName, "cluster-name", s.ClusterName, "The instance prefix for the cluster")
fs.StringVar(&s.ClusterCIDR, "cluster-cidr", s.ClusterCIDR, "CIDR Range for Pods in cluster.")
fs.StringVar(&s.ServiceCIDR, "service-cluster-ip-range", s.ServiceCIDR, "CIDR Range for Services in cluster.")
fs.Int32Var(&s.NodeCIDRMaskSize, "node-cidr-mask-size", s.NodeCIDRMaskSize, "Mask size for node cidr in cluster.")
fs.BoolVar(&s.AllocateNodeCIDRs, "allocate-node-cidrs", false, "Should CIDRs for Pods be allocated and set on the cloud provider.")
fs.BoolVar(&s.ConfigureCloudRoutes, "configure-cloud-routes", true, "Should CIDRs allocated by allocate-node-cidrs be configured on the cloud provider.")
fs.StringVar(&s.Master, "master", s.Master, "The address of the Kubernetes API server (overrides any value in kubeconfig)")
fs.StringVar(&s.Kubeconfig, "kubeconfig", s.Kubeconfig, "Path to kubeconfig file with authorization and master location information.")
fs.StringVar(&s.RootCAFile, "root-ca-file", s.RootCAFile, "If set, this root certificate authority will be included in service account's token secret. This must be a valid PEM-encoded CA bundle.")
fs.StringVar(&s.ContentType, "kube-api-content-type", s.ContentType, "Content type of requests sent to apiserver.")
fs.Float32Var(&s.KubeAPIQPS, "kube-api-qps", s.KubeAPIQPS, "QPS to use while talking with kubernetes apiserver")
fs.Int32Var(&s.KubeAPIBurst, "kube-api-burst", s.KubeAPIBurst, "Burst to use while talking with kubernetes apiserver")
fs.DurationVar(&s.ControllerStartInterval.Duration, "controller-start-interval", s.ControllerStartInterval.Duration, "Interval between starting controller managers.")
fs.BoolVar(&s.EnableGarbageCollector, "enable-garbage-collector", s.EnableGarbageCollector, "Enables the generic garbage collector. MUST be synced with the corresponding flag of the kube-apiserver.")
fs.Int32Var(&s.ConcurrentGCSyncs, "concurrent-gc-syncs", s.ConcurrentGCSyncs, "The number of garbage collector workers that are allowed to sync concurrently.")
fs.Float32Var(&s.NodeEvictionRate, "node-eviction-rate", 0.1, "Number of nodes per second on which pods are deleted in case of node failure when a zone is healthy (see --unhealthy-zone-threshold for definition of healthy/unhealthy). Zone refers to entire cluster in non-multizone clusters.")
fs.Float32Var(&s.SecondaryNodeEvictionRate, "secondary-node-eviction-rate", 0.01, "Number of nodes per second on which pods are deleted in case of node failure when a zone is unhealthy (see --unhealthy-zone-threshold for definition of healthy/unhealthy). Zone refers to entire cluster in non-multizone clusters. This value is implicitly overridden to 0 if the cluster size is smaller than --large-cluster-size-threshold.")
fs.Int32Var(&s.LargeClusterSizeThreshold, "large-cluster-size-threshold", 50, "Number of nodes from which NodeController treats the cluster as large for the eviction logic purposes. --secondary-node-eviction-rate is implicitly overridden to 0 for clusters this size or smaller.")
fs.Float32Var(&s.UnhealthyZoneThreshold, "unhealthy-zone-threshold", 0.55, "Fraction of Nodes in a zone which needs to be not Ready (minimum 3) for zone to be treated as unhealthy. ")
leaderelection.BindFlags(&s.LeaderElection, fs)
config.DefaultFeatureGate.AddFlag(fs)
}
