示例#1
0
// InitializeTLS checks for a configured TLSCertFile and TLSPrivateKeyFile: if unspecified a new self-signed
// certificate and key file are generated. Returns a configured server.TLSOptions object.
func InitializeTLS(kc *componentconfig.KubeletConfiguration) (*server.TLSOptions, error) {
	if kc.TLSCertFile == "" && kc.TLSPrivateKeyFile == "" {
		kc.TLSCertFile = path.Join(kc.CertDirectory, "kubelet.crt")
		kc.TLSPrivateKeyFile = path.Join(kc.CertDirectory, "kubelet.key")
		if !certutil.CanReadCertOrKey(kc.TLSCertFile, kc.TLSPrivateKeyFile) {
			if err := certutil.GenerateSelfSignedCert(nodeutil.GetHostname(kc.HostnameOverride), kc.TLSCertFile, kc.TLSPrivateKeyFile, nil, nil); err != nil {
				return nil, fmt.Errorf("unable to generate self signed cert: %v", err)
			}
			glog.V(4).Infof("Using self-signed cert (%s, %s)", kc.TLSCertFile, kc.TLSPrivateKeyFile)
		}
	}
	tlsOptions := &server.TLSOptions{
		Config: &tls.Config{
			// Can't use SSLv3 because of POODLE and BEAST
			// Can't use TLSv1.0 because of POODLE and BEAST using CBC cipher
			// Can't use TLSv1.1 because of RC4 cipher usage
			MinVersion: tls.VersionTLS12,
		},
		CertFile: kc.TLSCertFile,
		KeyFile:  kc.TLSPrivateKeyFile,
	}

	if len(kc.Authentication.X509.ClientCAFile) > 0 {
		clientCAs, err := cert.NewPool(kc.Authentication.X509.ClientCAFile)
		if err != nil {
			return nil, fmt.Errorf("unable to load client CA file %s: %v", kc.Authentication.X509.ClientCAFile, err)
		}
		// Specify allowed CAs for client certificates
		tlsOptions.Config.ClientCAs = clientCAs
		// Populate PeerCertificates in requests, but don't reject connections without verified certificates
		tlsOptions.Config.ClientAuth = tls.RequestClientCert
	}

	return tlsOptions, nil
}
示例#2
0
// InitializeTLS checks for a configured TLSCertFile and TLSPrivateKeyFile: if unspecified a new self-signed
// certificate and key file are generated. Returns a configured server.TLSOptions object.
func InitializeTLS(s *options.KubeletServer) (*server.TLSOptions, error) {
	if s.TLSCertFile == "" && s.TLSPrivateKeyFile == "" {
		s.TLSCertFile = path.Join(s.CertDirectory, "kubelet.crt")
		s.TLSPrivateKeyFile = path.Join(s.CertDirectory, "kubelet.key")
		if crypto.ShouldGenSelfSignedCerts(s.TLSCertFile, s.TLSPrivateKeyFile) {
			if err := crypto.GenerateSelfSignedCert(nodeutil.GetHostname(s.HostnameOverride), s.TLSCertFile, s.TLSPrivateKeyFile, nil, nil); err != nil {
				return nil, fmt.Errorf("unable to generate self signed cert: %v", err)
			}
			glog.V(4).Infof("Using self-signed cert (%s, %s)", s.TLSCertFile, s.TLSPrivateKeyFile)
		}
	}
	tlsOptions := &server.TLSOptions{
		Config: &tls.Config{
			// Can't use SSLv3 because of POODLE and BEAST
			// Can't use TLSv1.0 because of POODLE and BEAST using CBC cipher
			// Can't use TLSv1.1 because of RC4 cipher usage
			MinVersion: tls.VersionTLS12,
			// Populate PeerCertificates in requests, but don't yet reject connections without certificates.
			ClientAuth: tls.RequestClientCert,
		},
		CertFile: s.TLSCertFile,
		KeyFile:  s.TLSPrivateKeyFile,
	}
	return tlsOptions, nil
}
示例#3
0
// RunKubelet is responsible for setting up and running a kubelet.  It is used in three different applications:
//   1 Integration tests
//   2 Kubelet binary
//   3 Standalone 'kubernetes' binary
// Eventually, #2 will be replaced with instances of #3
func RunKubelet(kcfg *KubeletConfig, builder KubeletBuilder) error {
	kcfg.Hostname = nodeutil.GetHostname(kcfg.HostnameOverride)

	if len(kcfg.NodeName) == 0 {
		// Query the cloud provider for our node name, default to Hostname
		nodeName := kcfg.Hostname
		if kcfg.Cloud != nil {
			var err error
			instances, ok := kcfg.Cloud.Instances()
			if !ok {
				return fmt.Errorf("failed to get instances from cloud provider")
			}

			nodeName, err = instances.CurrentNodeName(kcfg.Hostname)
			if err != nil {
				return fmt.Errorf("error fetching current instance name from cloud provider: %v", err)
			}

			glog.V(2).Infof("cloud provider determined current node name to be %s", nodeName)
		}

		kcfg.NodeName = nodeName
	}

	eventBroadcaster := record.NewBroadcaster()
	kcfg.Recorder = eventBroadcaster.NewRecorder(api.EventSource{Component: "kubelet", Host: kcfg.NodeName})
	eventBroadcaster.StartLogging(glog.V(3).Infof)
	if kcfg.KubeClient != nil {
		glog.V(4).Infof("Sending events to api server.")
		eventBroadcaster.StartRecordingToSink(kcfg.KubeClient.Events(""))
	} else {
		glog.Warning("No api server defined - no events will be sent to API server.")
	}
	capabilities.Setup(kcfg.AllowPrivileged, kcfg.HostNetworkSources, 0)

	credentialprovider.SetPreferredDockercfgPath(kcfg.RootDirectory)

	if builder == nil {
		builder = createAndInitKubelet
	}
	if kcfg.OSInterface == nil {
		kcfg.OSInterface = kubecontainer.RealOS{}
	}
	k, podCfg, err := builder(kcfg)
	if err != nil {
		return fmt.Errorf("failed to create kubelet: %v", err)
	}
	// process pods and exit.
	if kcfg.Runonce {
		if _, err := k.RunOnce(podCfg.Updates()); err != nil {
			return fmt.Errorf("runonce failed: %v", err)
		}
		glog.Infof("Started kubelet as runonce")
	} else {
		startKubelet(k, podCfg, kcfg)
		glog.Infof("Started kubelet")
	}
	return nil
}
示例#4
0
func (hc HostnameCheck) Check() (warnings, errors []error) {
	errors = []error{}
	hostname := node.GetHostname("")
	for _, msg := range validation.ValidateNodeName(hostname, false) {
		errors = append(errors, fmt.Errorf("hostname \"%s\" %s", hostname, msg))
	}
	return nil, errors
}
示例#5
0
// Tries to download the kubelet-<node-name> configmap from "kube-system" namespace via the API server and returns a JSON string or error
func getRemoteKubeletConfig(s *options.KubeletServer, kubeDeps *kubelet.KubeletDeps) (string, error) {
	// TODO(mtaufen): should probably cache clientset and pass into this function rather than regenerate on every request
	kubeClient, err := getKubeClient(s)
	if err != nil {
		return "", err
	}

	configmap, err := func() (*v1.ConfigMap, error) {
		var nodename types.NodeName
		hostname := nodeutil.GetHostname(s.HostnameOverride)

		if kubeDeps != nil && kubeDeps.Cloud != nil {
			instances, ok := kubeDeps.Cloud.Instances()
			if !ok {
				err = fmt.Errorf("failed to get instances from cloud provider, can't determine nodename.")
				return nil, err
			}
			nodename, err = instances.CurrentNodeName(hostname)
			if err != nil {
				err = fmt.Errorf("error fetching current instance name from cloud provider: %v", err)
				return nil, err
			}
			// look for kubelet-<node-name> configmap from "kube-system"
			configmap, err := kubeClient.CoreV1Client.ConfigMaps("kube-system").Get(fmt.Sprintf("kubelet-%s", nodename))
			if err != nil {
				return nil, err
			}
			return configmap, nil
		}
		// No cloud provider yet, so can't get the nodename via Cloud.Instances().CurrentNodeName(hostname), try just using the hostname
		configmap, err := kubeClient.CoreV1Client.ConfigMaps("kube-system").Get(fmt.Sprintf("kubelet-%s", hostname))
		if err != nil {
			return nil, fmt.Errorf("cloud provider was nil, and attempt to use hostname to find config resulted in: %v", err)
		}
		return configmap, nil
	}()
	if err != nil {
		return "", err
	}

	// When we create the KubeletConfiguration configmap, we put a json string
	// representation of the config in a `kubelet.config` key.
	jsonstr, ok := configmap.Data["kubelet.config"]
	if !ok {
		return "", fmt.Errorf("KubeletConfiguration configmap did not contain a value with key `kubelet.config`")
	}

	return jsonstr, nil
}
示例#6
0
func newCinderDiskUtil(cinderConfigFile string, isNoMountSupported bool) *CinderDiskUtil {
	result := &CinderDiskUtil{}

	if cinderConfigFile != "" {
		cinderClient, err := newCinderClient(cinderConfigFile)
		if err != nil {
			glog.Warningf("Init cinder client failed: %v", err)
		} else {
			result.cinderBaremetalUtil = &CinderBaremetalUtil{
				client:             cinderClient,
				hostname:           node.GetHostname(""),
				isNoMountSupported: isNoMountSupported,
			}
		}
	} else {
		glog.V(4).Info("Cinder volume configure is not provided")
	}

	return result
}
示例#7
0
文件: server.go 项目: sztsian/origin
// InitializeTLS checks for a configured TLSCertFile and TLSPrivateKeyFile: if unspecified a new self-signed
// certificate and key file are generated. Returns a configured kubelet.TLSOptions object.
func (s *KubeletServer) InitializeTLS() (*kubelet.TLSOptions, error) {
	if s.TLSCertFile == "" && s.TLSPrivateKeyFile == "" {
		s.TLSCertFile = path.Join(s.CertDirectory, "kubelet.crt")
		s.TLSPrivateKeyFile = path.Join(s.CertDirectory, "kubelet.key")
		if err := util.GenerateSelfSignedCert(nodeutil.GetHostname(s.HostnameOverride), s.TLSCertFile, s.TLSPrivateKeyFile, nil, nil); err != nil {
			return nil, fmt.Errorf("unable to generate self signed cert: %v", err)
		}
		glog.V(4).Infof("Using self-signed cert (%s, %s)", s.TLSCertFile, s.TLSPrivateKeyFile)
	}
	tlsOptions := &kubelet.TLSOptions{
		Config: &tls.Config{
			// Change default from SSLv3 to TLSv1.0 (because of POODLE vulnerability).
			MinVersion: tls.VersionTLS10,
			// Populate PeerCertificates in requests, but don't yet reject connections without certificates.
			ClientAuth: tls.RequestClientCert,
		},
		CertFile: s.TLSCertFile,
		KeyFile:  s.TLSPrivateKeyFile,
	}
	return tlsOptions, nil
}
示例#8
0
// Run runs the specified ProxyServer.  This should never exit.
func (s *ProxyServer) Run(_ []string) error {
	// TODO(vmarmol): Use container config for this.
	oomAdjuster := oom.NewOomAdjuster()
	if err := oomAdjuster.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.V(2).Info(err)
	}

	// Run in its own container.
	if err := util.RunInResourceContainer(s.ResourceContainer); err != nil {
		glog.Warningf("Failed to start in resource-only container %q: %v", s.ResourceContainer, err)
	} else {
		glog.V(2).Infof("Running in resource-only container %q", s.ResourceContainer)
	}

	// define api config source
	if s.Kubeconfig == "" && s.Master == "" {
		glog.Warningf("Neither --kubeconfig nor --master was specified.  Using default API client.  This might not work.")
	}

	// This creates a client, first loading any specified kubeconfig
	// file, and then overriding the Master flag, if non-empty.
	kubeconfig, err := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(
		&clientcmd.ClientConfigLoadingRules{ExplicitPath: s.Kubeconfig},
		&clientcmd.ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: s.Master}}).ClientConfig()
	if err != nil {
		return err
	}

	client, err := client.New(kubeconfig)
	if err != nil {
		glog.Fatalf("Invalid API configuration: %v", err)
	}

	// Add event recorder
	Hostname := nodeutil.GetHostname(s.HostnameOverride)
	eventBroadcaster := record.NewBroadcaster()
	s.Recorder = eventBroadcaster.NewRecorder(api.EventSource{Component: "kube-proxy", Host: Hostname})
	eventBroadcaster.StartRecordingToSink(client.Events(""))

	s.nodeRef = &api.ObjectReference{
		Kind:      "Node",
		Name:      Hostname,
		UID:       types.UID(Hostname),
		Namespace: "",
	}

	// Birth Cry
	s.birthCry()

	serviceConfig := config.NewServiceConfig()
	endpointsConfig := config.NewEndpointsConfig()

	protocol := iptables.ProtocolIpv4
	if s.BindAddress.To4() == nil {
		protocol = iptables.ProtocolIpv6
	}
	loadBalancer := userspace.NewLoadBalancerRR()
	proxier, err := userspace.NewProxier(loadBalancer, s.BindAddress, iptables.New(exec.New(), protocol), s.PortRange)
	if err != nil {
		glog.Fatalf("Unable to create proxer: %v", err)
	}

	// Wire proxier to handle changes to services
	serviceConfig.RegisterHandler(proxier)
	// And wire loadBalancer to handle changes to endpoints to services
	endpointsConfig.RegisterHandler(loadBalancer)

	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.

	config.NewSourceAPI(
		client,
		30*time.Second,
		serviceConfig.Channel("api"),
		endpointsConfig.Channel("api"),
	)

	if s.HealthzPort > 0 {
		go util.Forever(func() {
			err := http.ListenAndServe(s.HealthzBindAddress.String()+":"+strconv.Itoa(s.HealthzPort), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second)
	}

	// Just loop forever for now...
	proxier.SyncLoop()
	return nil
}
示例#9
0
// NewProxyServerDefault creates a new ProxyServer object with default parameters.
func NewProxyServerDefault(config *options.ProxyServerConfig) (*ProxyServer, error) {
	if c, err := configz.New("componentconfig"); err == nil {
		c.Set(config.KubeProxyConfiguration)
	} else {
		glog.Errorf("unable to register configz: %s", err)
	}
	protocol := utiliptables.ProtocolIpv4
	if net.ParseIP(config.BindAddress).To4() == nil {
		protocol = utiliptables.ProtocolIpv6
	}

	// Create a iptables utils.
	execer := exec.New()
	dbus := utildbus.New()
	iptInterface := utiliptables.New(execer, dbus, protocol)

	// We omit creation of pretty much everything if we run in cleanup mode
	if config.CleanupAndExit {
		return &ProxyServer{
			Config:       config,
			IptInterface: iptInterface,
		}, nil
	}

	// TODO(vmarmol): Use container config for this.
	var oomAdjuster *oom.OOMAdjuster
	if config.OOMScoreAdj != nil {
		oomAdjuster = oom.NewOOMAdjuster()
		if err := oomAdjuster.ApplyOOMScoreAdj(0, int(*config.OOMScoreAdj)); err != nil {
			glog.V(2).Info(err)
		}
	}

	if config.ResourceContainer != "" {
		// Run in its own container.
		if err := resourcecontainer.RunInResourceContainer(config.ResourceContainer); err != nil {
			glog.Warningf("Failed to start in resource-only container %q: %v", config.ResourceContainer, err)
		} else {
			glog.V(2).Infof("Running in resource-only container %q", config.ResourceContainer)
		}
	}

	// Create a Kube Client
	// define api config source
	if config.Kubeconfig == "" && config.Master == "" {
		glog.Warningf("Neither --kubeconfig nor --master was specified.  Using default API client.  This might not work.")
	}
	// This creates a client, first loading any specified kubeconfig
	// file, and then overriding the Master flag, if non-empty.
	kubeconfig, err := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(
		&clientcmd.ClientConfigLoadingRules{ExplicitPath: config.Kubeconfig},
		&clientcmd.ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: config.Master}}).ClientConfig()
	if err != nil {
		return nil, err
	}

	kubeconfig.ContentType = config.ContentType
	// Override kubeconfig qps/burst settings from flags
	kubeconfig.QPS = config.KubeAPIQPS
	kubeconfig.Burst = int(config.KubeAPIBurst)

	client, err := clientset.NewForConfig(kubeconfig)
	if err != nil {
		glog.Fatalf("Invalid API configuration: %v", err)
	}

	// Create event recorder
	hostname := nodeutil.GetHostname(config.HostnameOverride)
	eventBroadcaster := record.NewBroadcaster()
	recorder := eventBroadcaster.NewRecorder(api.EventSource{Component: "kube-proxy", Host: hostname})

	var proxier proxy.ProxyProvider
	var endpointsHandler proxyconfig.EndpointsConfigHandler

	proxyMode := getProxyMode(string(config.Mode), client.Core().Nodes(), hostname, iptInterface, iptables.LinuxKernelCompatTester{})
	if proxyMode == proxyModeIPTables {
		glog.V(0).Info("Using iptables Proxier.")
		if config.IPTablesMasqueradeBit == nil {
			// IPTablesMasqueradeBit must be specified or defaulted.
			return nil, fmt.Errorf("Unable to read IPTablesMasqueradeBit from config")
		}
		proxierIPTables, err := iptables.NewProxier(iptInterface, utilsysctl.New(), execer, config.IPTablesSyncPeriod.Duration, config.MasqueradeAll, int(*config.IPTablesMasqueradeBit), config.ClusterCIDR, hostname, getNodeIP(client, hostname))
		if err != nil {
			glog.Fatalf("Unable to create proxier: %v", err)
		}
		proxier = proxierIPTables
		endpointsHandler = proxierIPTables
		// No turning back. Remove artifacts that might still exist from the userspace Proxier.
		glog.V(0).Info("Tearing down userspace rules.")
		userspace.CleanupLeftovers(iptInterface)
	} else {
		glog.V(0).Info("Using userspace Proxier.")
		// This is a proxy.LoadBalancer which NewProxier needs but has methods we don't need for
		// our config.EndpointsConfigHandler.
		loadBalancer := userspace.NewLoadBalancerRR()
		// set EndpointsConfigHandler to our loadBalancer
		endpointsHandler = loadBalancer

		proxierUserspace, err := userspace.NewProxier(
			loadBalancer,
			net.ParseIP(config.BindAddress),
			iptInterface,
			*utilnet.ParsePortRangeOrDie(config.PortRange),
			config.IPTablesSyncPeriod.Duration,
			config.UDPIdleTimeout.Duration,
		)
		if err != nil {
			glog.Fatalf("Unable to create proxier: %v", err)
		}
		proxier = proxierUserspace
		// Remove artifacts from the pure-iptables Proxier.
		glog.V(0).Info("Tearing down pure-iptables proxy rules.")
		iptables.CleanupLeftovers(iptInterface)
	}
	iptInterface.AddReloadFunc(proxier.Sync)

	// Create configs (i.e. Watches for Services and Endpoints)
	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.
	serviceConfig := proxyconfig.NewServiceConfig()
	serviceConfig.RegisterHandler(proxier)

	endpointsConfig := proxyconfig.NewEndpointsConfig()
	endpointsConfig.RegisterHandler(endpointsHandler)

	proxyconfig.NewSourceAPI(
		client.Core().RESTClient(),
		config.ConfigSyncPeriod,
		serviceConfig.Channel("api"),
		endpointsConfig.Channel("api"),
	)

	config.NodeRef = &api.ObjectReference{
		Kind:      "Node",
		Name:      hostname,
		UID:       types.UID(hostname),
		Namespace: "",
	}

	conntracker := realConntracker{}

	return NewProxyServer(client, config, iptInterface, proxier, eventBroadcaster, recorder, conntracker, proxyMode)
}
示例#10
0
func (util *RBDUtil) rbdLock(b rbdBuilder, lock bool) error {
	var err error
	var output, locker string
	var cmd []byte
	var secret_opt []string

	if b.Secret != "" {
		secret_opt = []string{"--key=" + b.Secret}
	} else {
		secret_opt = []string{"-k", b.Keyring}
	}
	// construct lock id using host name and a magic prefix
	lock_id := "kubelet_lock_magic_" + node.GetHostname("")

	l := len(b.Mon)
	// avoid mount storm, pick a host randomly
	start := rand.Int() % l
	// iterate all hosts until mount succeeds.
	for i := start; i < start+l; i++ {
		mon := b.Mon[i%l]
		// cmd "rbd lock list" serves two purposes:
		// for fencing, check if lock already held for this host
		// this edge case happens if host crashes in the middle of acquiring lock and mounting rbd
		// for defencing, get the locker name, something like "client.1234"
		cmd, err = b.plugin.execCommand("rbd",
			append([]string{"lock", "list", b.Image, "--pool", b.Pool, "--id", b.Id, "-m", mon}, secret_opt...))
		output = string(cmd)

		if err != nil {
			continue
		}

		if lock {
			// check if lock is already held for this host by matching lock_id and rbd lock id
			if strings.Contains(output, lock_id) {
				// this host already holds the lock, exit
				glog.V(1).Infof("rbd: lock already held for %s", lock_id)
				return nil
			}
			// hold a lock: rbd lock add
			cmd, err = b.plugin.execCommand("rbd",
				append([]string{"lock", "add", b.Image, lock_id, "--pool", b.Pool, "--id", b.Id, "-m", mon}, secret_opt...))
		} else {
			// defencing, find locker name
			ind := strings.LastIndex(output, lock_id) - 1
			for i := ind; i >= 0; i-- {
				if output[i] == '\n' {
					locker = output[(i + 1):ind]
					break
				}
			}
			// remove a lock: rbd lock remove
			cmd, err = b.plugin.execCommand("rbd",
				append([]string{"lock", "remove", b.Image, lock_id, locker, "--pool", b.Pool, "--id", b.Id, "-m", mon}, secret_opt...))
		}

		if err == nil {
			//lock is acquired
			break
		}
	}
	return err
}
示例#11
0
func run(s *options.KubeletServer, kubeDeps *kubelet.KubeletDeps) (err error) {
	// TODO: this should be replaced by a --standalone flag
	standaloneMode := (len(s.APIServerList) == 0 && !s.RequireKubeConfig)

	if s.ExitOnLockContention && s.LockFilePath == "" {
		return errors.New("cannot exit on lock file contention: no lock file specified")
	}

	done := make(chan struct{})
	if s.LockFilePath != "" {
		glog.Infof("acquiring file lock on %q", s.LockFilePath)
		if err := flock.Acquire(s.LockFilePath); err != nil {
			return fmt.Errorf("unable to acquire file lock on %q: %v", s.LockFilePath, err)
		}
		if s.ExitOnLockContention {
			glog.Infof("watching for inotify events for: %v", s.LockFilePath)
			if err := watchForLockfileContention(s.LockFilePath, done); err != nil {
				return err
			}
		}
	}

	// Set feature gates based on the value in KubeletConfiguration
	err = utilconfig.DefaultFeatureGate.Set(s.KubeletConfiguration.FeatureGates)
	if err != nil {
		return err
	}

	// Register current configuration with /configz endpoint
	cfgz, cfgzErr := initConfigz(&s.KubeletConfiguration)
	if utilconfig.DefaultFeatureGate.DynamicKubeletConfig() {
		// Look for config on the API server. If it exists, replace s.KubeletConfiguration
		// with it and continue. initKubeletConfigSync also starts the background thread that checks for new config.

		// Don't do dynamic Kubelet configuration in runonce mode
		if s.RunOnce == false {
			remoteKC, err := initKubeletConfigSync(s)
			if err == nil {
				// Update s (KubeletServer) with new config from API server
				s.KubeletConfiguration = *remoteKC
				// Ensure that /configz is up to date with the new config
				if cfgzErr != nil {
					glog.Errorf("was unable to register configz before due to %s, will not be able to set now", cfgzErr)
				} else {
					setConfigz(cfgz, &s.KubeletConfiguration)
				}
				// Update feature gates from the new config
				err = utilconfig.DefaultFeatureGate.Set(s.KubeletConfiguration.FeatureGates)
				if err != nil {
					return err
				}
			}
		}
	}

	if kubeDeps == nil {
		var kubeClient, eventClient *clientset.Clientset
		var cloud cloudprovider.Interface

		if s.CloudProvider != componentconfigv1alpha1.AutoDetectCloudProvider {
			cloud, err = cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
			if err != nil {
				return err
			}
			if cloud == nil {
				glog.V(2).Infof("No cloud provider specified: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)
			} else {
				glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)
			}
		}

		if s.BootstrapKubeconfig != "" {
			nodeName, err := getNodeName(cloud, nodeutil.GetHostname(s.HostnameOverride))
			if err != nil {
				return err
			}
			if err := bootstrapClientCert(s.KubeConfig.Value(), s.BootstrapKubeconfig, s.CertDirectory, nodeName); err != nil {
				return err
			}
		}

		clientConfig, err := CreateAPIServerClientConfig(s)
		if err == nil {
			kubeClient, err = clientset.NewForConfig(clientConfig)
			if err != nil {
				glog.Warningf("New kubeClient from clientConfig error: %v", err)
			}
			// make a separate client for events
			eventClientConfig := *clientConfig
			eventClientConfig.QPS = float32(s.EventRecordQPS)
			eventClientConfig.Burst = int(s.EventBurst)
			eventClient, err = clientset.NewForConfig(&eventClientConfig)
		} else {
			if s.RequireKubeConfig {
				return fmt.Errorf("invalid kubeconfig: %v", err)
			}
			if standaloneMode {
				glog.Warningf("No API client: %v", err)
			}
		}

		kubeDeps, err = UnsecuredKubeletDeps(s)
		if err != nil {
			return err
		}

		kubeDeps.Cloud = cloud
		kubeDeps.KubeClient = kubeClient
		kubeDeps.EventClient = eventClient
	}

	if kubeDeps.Auth == nil {
		nodeName, err := getNodeName(kubeDeps.Cloud, nodeutil.GetHostname(s.HostnameOverride))
		if err != nil {
			return err
		}
		auth, err := buildAuth(nodeName, kubeDeps.KubeClient, s.KubeletConfiguration)
		if err != nil {
			return err
		}
		kubeDeps.Auth = auth
	}

	if kubeDeps.CAdvisorInterface == nil {
		kubeDeps.CAdvisorInterface, err = cadvisor.New(uint(s.CAdvisorPort), s.ContainerRuntime, s.RootDirectory)
		if err != nil {
			return err
		}
	}

	if kubeDeps.ContainerManager == nil {
		if s.SystemCgroups != "" && s.CgroupRoot == "" {
			return fmt.Errorf("invalid configuration: system container was specified and cgroup root was not specified")
		}
		kubeDeps.ContainerManager, err = cm.NewContainerManager(
			kubeDeps.Mounter,
			kubeDeps.CAdvisorInterface,
			cm.NodeConfig{
				RuntimeCgroupsName:    s.RuntimeCgroups,
				SystemCgroupsName:     s.SystemCgroups,
				KubeletCgroupsName:    s.KubeletCgroups,
				ContainerRuntime:      s.ContainerRuntime,
				CgroupsPerQOS:         s.ExperimentalCgroupsPerQOS,
				CgroupRoot:            s.CgroupRoot,
				CgroupDriver:          s.CgroupDriver,
				ProtectKernelDefaults: s.ProtectKernelDefaults,
				EnableCRI:             s.EnableCRI,
			},
			s.ExperimentalFailSwapOn)

		if err != nil {
			return err
		}
	}

	if err := checkPermissions(); err != nil {
		glog.Error(err)
	}

	utilruntime.ReallyCrash = s.ReallyCrashForTesting

	rand.Seed(time.Now().UTC().UnixNano())

	// TODO(vmarmol): Do this through container config.
	oomAdjuster := kubeDeps.OOMAdjuster
	if err := oomAdjuster.ApplyOOMScoreAdj(0, int(s.OOMScoreAdj)); err != nil {
		glog.Warning(err)
	}

	if err := RunKubelet(&s.KubeletConfiguration, kubeDeps, s.RunOnce, standaloneMode); err != nil {
		return err
	}

	if s.HealthzPort > 0 {
		healthz.DefaultHealthz()
		go wait.Until(func() {
			err := http.ListenAndServe(net.JoinHostPort(s.HealthzBindAddress, strconv.Itoa(int(s.HealthzPort))), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second, wait.NeverStop)
	}

	if s.RunOnce {
		return nil
	}

	<-done
	return nil
}
示例#12
0
// RunKubelet is responsible for setting up and running a kubelet.  It is used in three different applications:
//   1 Integration tests
//   2 Kubelet binary
//   3 Standalone 'kubernetes' binary
// Eventually, #2 will be replaced with instances of #3
func RunKubelet(kubeCfg *componentconfig.KubeletConfiguration, kubeDeps *kubelet.KubeletDeps, runOnce bool, standaloneMode bool) error {
	hostname := nodeutil.GetHostname(kubeCfg.HostnameOverride)
	// Query the cloud provider for our node name, default to hostname if kcfg.Cloud == nil
	nodeName, err := getNodeName(kubeDeps.Cloud, hostname)
	if err != nil {
		return err
	}

	eventBroadcaster := record.NewBroadcaster()
	kubeDeps.Recorder = eventBroadcaster.NewRecorder(v1.EventSource{Component: "kubelet", Host: string(nodeName)})
	eventBroadcaster.StartLogging(glog.V(3).Infof)
	if kubeDeps.EventClient != nil {
		glog.V(4).Infof("Sending events to api server.")
		eventBroadcaster.StartRecordingToSink(&v1core.EventSinkImpl{Interface: kubeDeps.EventClient.Events("")})
	} else {
		glog.Warning("No api server defined - no events will be sent to API server.")
	}

	// TODO(mtaufen): I moved the validation of these fields here, from UnsecuredKubeletConfig,
	//                so that I could remove the associated fields from KubeletConfig. I would
	//                prefer this to be done as part of an independent validation step on the
	//                KubeletConfiguration. But as far as I can tell, we don't have an explicit
	//                place for validation of the KubeletConfiguration yet.
	hostNetworkSources, err := kubetypes.GetValidatedSources(kubeCfg.HostNetworkSources)
	if err != nil {
		return err
	}

	hostPIDSources, err := kubetypes.GetValidatedSources(kubeCfg.HostPIDSources)
	if err != nil {
		return err
	}

	hostIPCSources, err := kubetypes.GetValidatedSources(kubeCfg.HostIPCSources)
	if err != nil {
		return err
	}

	privilegedSources := capabilities.PrivilegedSources{
		HostNetworkSources: hostNetworkSources,
		HostPIDSources:     hostPIDSources,
		HostIPCSources:     hostIPCSources,
	}
	capabilities.Setup(kubeCfg.AllowPrivileged, privilegedSources, 0)

	credentialprovider.SetPreferredDockercfgPath(kubeCfg.RootDirectory)
	glog.V(2).Infof("Using root directory: %v", kubeCfg.RootDirectory)

	builder := kubeDeps.Builder
	if builder == nil {
		builder = CreateAndInitKubelet
	}
	if kubeDeps.OSInterface == nil {
		kubeDeps.OSInterface = kubecontainer.RealOS{}
	}
	k, err := builder(kubeCfg, kubeDeps, standaloneMode)
	if err != nil {
		return fmt.Errorf("failed to create kubelet: %v", err)
	}

	// NewMainKubelet should have set up a pod source config if one didn't exist
	// when the builder was run. This is just a precaution.
	if kubeDeps.PodConfig == nil {
		return fmt.Errorf("failed to create kubelet, pod source config was nil!")
	}
	podCfg := kubeDeps.PodConfig

	rlimit.RlimitNumFiles(uint64(kubeCfg.MaxOpenFiles))

	// TODO(dawnchen): remove this once we deprecated old debian containervm images.
	// This is a workaround for issue: https://github.com/opencontainers/runc/issues/726
	// The current chosen number is consistent with most of other os dist.
	const maxkeysPath = "/proc/sys/kernel/keys/root_maxkeys"
	const minKeys uint64 = 1000000
	key, err := ioutil.ReadFile(maxkeysPath)
	if err != nil {
		glog.Errorf("Cannot read keys quota in %s", maxkeysPath)
	} else {
		fields := strings.Fields(string(key))
		nkey, _ := strconv.ParseUint(fields[0], 10, 64)
		if nkey < minKeys {
			glog.Infof("Setting keys quota in %s to %d", maxkeysPath, minKeys)
			err = ioutil.WriteFile(maxkeysPath, []byte(fmt.Sprintf("%d", uint64(minKeys))), 0644)
			if err != nil {
				glog.Warningf("Failed to update %s: %v", maxkeysPath, err)
			}
		}
	}
	const maxbytesPath = "/proc/sys/kernel/keys/root_maxbytes"
	const minBytes uint64 = 25000000
	bytes, err := ioutil.ReadFile(maxbytesPath)
	if err != nil {
		glog.Errorf("Cannot read keys bytes in %s", maxbytesPath)
	} else {
		fields := strings.Fields(string(bytes))
		nbyte, _ := strconv.ParseUint(fields[0], 10, 64)
		if nbyte < minBytes {
			glog.Infof("Setting keys bytes in %s to %d", maxbytesPath, minBytes)
			err = ioutil.WriteFile(maxbytesPath, []byte(fmt.Sprintf("%d", uint64(minBytes))), 0644)
			if err != nil {
				glog.Warningf("Failed to update %s: %v", maxbytesPath, err)
			}
		}
	}

	// process pods and exit.
	if runOnce {
		if _, err := k.RunOnce(podCfg.Updates()); err != nil {
			return fmt.Errorf("runonce failed: %v", err)
		}
		glog.Infof("Started kubelet %s as runonce", version.Get().String())
	} else {
		startKubelet(k, podCfg, kubeCfg, kubeDeps)
		glog.Infof("Started kubelet %s", version.Get().String())
	}
	return nil
}
示例#13
0
// NewProxyServerDefault creates a new ProxyServer object with default parameters.
func NewProxyServerDefault(config *ProxyServerConfig) (*ProxyServer, error) {
	protocol := utiliptables.ProtocolIpv4
	if config.BindAddress.To4() == nil {
		protocol = utiliptables.ProtocolIpv6
	}

	// Create a iptables utils.
	execer := exec.New()
	dbus := utildbus.New()
	iptInterface := utiliptables.New(execer, dbus, protocol)

	// We ommit creation of pretty much everything if we run in cleanup mode
	if config.CleanupAndExit {
		return &ProxyServer{
			Config:       config,
			IptInterface: iptInterface,
		}, nil
	}

	// TODO(vmarmol): Use container config for this.
	var oomAdjuster *oom.OOMAdjuster
	if config.OOMScoreAdj != 0 {
		oomAdjuster = oom.NewOOMAdjuster()
		if err := oomAdjuster.ApplyOOMScoreAdj(0, config.OOMScoreAdj); err != nil {
			glog.V(2).Info(err)
		}
	}

	if config.ResourceContainer != "" {
		// Run in its own container.
		if err := util.RunInResourceContainer(config.ResourceContainer); err != nil {
			glog.Warningf("Failed to start in resource-only container %q: %v", config.ResourceContainer, err)
		} else {
			glog.V(2).Infof("Running in resource-only container %q", config.ResourceContainer)
		}
	}

	// Create a Kube Client
	// define api config source
	if config.Kubeconfig == "" && config.Master == "" {
		glog.Warningf("Neither --kubeconfig nor --master was specified.  Using default API client.  This might not work.")
	}
	// This creates a client, first loading any specified kubeconfig
	// file, and then overriding the Master flag, if non-empty.
	kubeconfig, err := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(
		&clientcmd.ClientConfigLoadingRules{ExplicitPath: config.Kubeconfig},
		&clientcmd.ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: config.Master}}).ClientConfig()
	if err != nil {
		return nil, err
	}

	// Override kubeconfig qps/burst settings from flags
	kubeconfig.QPS = config.KubeApiQps
	kubeconfig.Burst = config.KubeApiBurst

	client, err := kubeclient.New(kubeconfig)
	if err != nil {
		glog.Fatalf("Invalid API configuration: %v", err)
	}

	// Create event recorder
	hostname := nodeutil.GetHostname(config.HostnameOverride)
	eventBroadcaster := record.NewBroadcaster()
	recorder := eventBroadcaster.NewRecorder(api.EventSource{Component: "kube-proxy", Host: hostname})
	eventBroadcaster.StartRecordingToSink(client.Events(""))

	var proxier proxy.ProxyProvider
	var endpointsHandler proxyconfig.EndpointsConfigHandler

	useIptablesProxy := false
	if mayTryIptablesProxy(config.ProxyMode, client.Nodes(), hostname) {
		var err error
		// guaranteed false on error, error only necessary for debugging
		useIptablesProxy, err = iptables.ShouldUseIptablesProxier()
		if err != nil {
			glog.Errorf("Can't determine whether to use iptables proxy, using userspace proxier: %v", err)
		}
	}

	if useIptablesProxy {
		glog.V(2).Info("Using iptables Proxier.")
		proxierIptables, err := iptables.NewProxier(iptInterface, execer, config.IptablesSyncPeriod, config.MasqueradeAll)
		if err != nil {
			glog.Fatalf("Unable to create proxier: %v", err)
		}
		proxier = proxierIptables
		endpointsHandler = proxierIptables
		// No turning back. Remove artifacts that might still exist from the userspace Proxier.
		glog.V(2).Info("Tearing down userspace rules. Errors here are acceptable.")
		userspace.CleanupLeftovers(iptInterface)
	} else {
		glog.V(2).Info("Using userspace Proxier.")
		// This is a proxy.LoadBalancer which NewProxier needs but has methods we don't need for
		// our config.EndpointsConfigHandler.
		loadBalancer := userspace.NewLoadBalancerRR()
		// set EndpointsConfigHandler to our loadBalancer
		endpointsHandler = loadBalancer

		proxierUserspace, err := userspace.NewProxier(loadBalancer, config.BindAddress, iptInterface, config.PortRange, config.IptablesSyncPeriod)
		if err != nil {
			glog.Fatalf("Unable to create proxier: %v", err)
		}
		proxier = proxierUserspace
		// Remove artifacts from the pure-iptables Proxier.
		glog.V(2).Info("Tearing down pure-iptables proxy rules. Errors here are acceptable.")
		iptables.CleanupLeftovers(iptInterface)
	}
	iptInterface.AddReloadFunc(proxier.Sync)

	// Create configs (i.e. Watches for Services and Endpoints)
	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.
	serviceConfig := proxyconfig.NewServiceConfig()
	serviceConfig.RegisterHandler(proxier)

	endpointsConfig := proxyconfig.NewEndpointsConfig()
	endpointsConfig.RegisterHandler(endpointsHandler)

	proxyconfig.NewSourceAPI(
		client,
		config.ConfigSyncPeriod,
		serviceConfig.Channel("api"),
		endpointsConfig.Channel("api"),
	)

	config.nodeRef = &api.ObjectReference{
		Kind:      "Node",
		Name:      hostname,
		UID:       types.UID(hostname),
		Namespace: "",
	}
	return NewProxyServer(config, iptInterface, proxier, recorder)
}
示例#14
0
func run(s *options.KubeletServer, kcfg *KubeletConfig) (err error) {
	if s.ExitOnLockContention && s.LockFilePath == "" {
		return errors.New("cannot exit on lock file contention: no lock file specified")
	}

	done := make(chan struct{})
	if s.LockFilePath != "" {
		glog.Infof("acquiring lock on %q", s.LockFilePath)
		if err := flock.Acquire(s.LockFilePath); err != nil {
			return fmt.Errorf("unable to acquire file lock on %q: %v", s.LockFilePath, err)
		}
		if s.ExitOnLockContention {
			glog.Infof("watching for inotify events for: %v", s.LockFilePath)
			if err := watchForLockfileContention(s.LockFilePath, done); err != nil {
				return err
			}
		}
	}
	if c, err := configz.New("componentconfig"); err == nil {
		c.Set(s.KubeletConfiguration)
	} else {
		glog.Errorf("unable to register configz: %s", err)
	}

	if kcfg == nil {
		var kubeClient, eventClient *clientset.Clientset
		var autoDetectCloudProvider bool
		var cloud cloudprovider.Interface

		if s.CloudProvider == kubeExternal.AutoDetectCloudProvider {
			autoDetectCloudProvider = true
		} else {
			cloud, err = cloudprovider.InitCloudProvider(s.CloudProvider, s.CloudConfigFile)
			if err != nil {
				return err
			}
			if cloud == nil {
				glog.V(2).Infof("No cloud provider specified: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)
			} else {
				glog.V(2).Infof("Successfully initialized cloud provider: %q from the config file: %q\n", s.CloudProvider, s.CloudConfigFile)
			}
		}

		if s.BootstrapKubeconfig != "" {
			nodeName, err := getNodeName(cloud, nodeutil.GetHostname(s.HostnameOverride))
			if err != nil {
				return err
			}
			if err := bootstrapClientCert(s.KubeConfig.Value(), s.BootstrapKubeconfig, s.CertDirectory, nodeName); err != nil {
				return err
			}
		}

		clientConfig, err := CreateAPIServerClientConfig(s)
		if err == nil {
			kubeClient, err = clientset.NewForConfig(clientConfig)

			// make a separate client for events
			eventClientConfig := *clientConfig
			eventClientConfig.QPS = float32(s.EventRecordQPS)
			eventClientConfig.Burst = int(s.EventBurst)
			eventClient, err = clientset.NewForConfig(&eventClientConfig)
		}
		if err != nil {
			if s.RequireKubeConfig {
				return fmt.Errorf("invalid kubeconfig: %v", err)
			}
			// TODO: this should be replaced by a --standalone flag
			if len(s.APIServerList) > 0 {
				glog.Warningf("No API client: %v", err)
			}
		}

		cfg, err := UnsecuredKubeletConfig(s)
		if err != nil {
			return err
		}

		kcfg = cfg
		kcfg.AutoDetectCloudProvider = autoDetectCloudProvider
		kcfg.Cloud = cloud
		kcfg.KubeClient = kubeClient
		kcfg.EventClient = eventClient
	}

	if kcfg.CAdvisorInterface == nil {
		kcfg.CAdvisorInterface, err = cadvisor.New(uint(s.CAdvisorPort), kcfg.ContainerRuntime)
		if err != nil {
			return err
		}
	}

	if kcfg.ContainerManager == nil {
		if kcfg.SystemCgroups != "" && kcfg.CgroupRoot == "" {
			return fmt.Errorf("invalid configuration: system container was specified and cgroup root was not specified")
		}
		kcfg.ContainerManager, err = cm.NewContainerManager(kcfg.Mounter, kcfg.CAdvisorInterface, cm.NodeConfig{
			RuntimeCgroupsName:    kcfg.RuntimeCgroups,
			SystemCgroupsName:     kcfg.SystemCgroups,
			KubeletCgroupsName:    kcfg.KubeletCgroups,
			ContainerRuntime:      kcfg.ContainerRuntime,
			CgroupsPerQOS:         kcfg.CgroupsPerQOS,
			CgroupRoot:            kcfg.CgroupRoot,
			ProtectKernelDefaults: kcfg.ProtectKernelDefaults,
		})
		if err != nil {
			return err
		}
	}

	if err := checkPermissions(); err != nil {
		glog.Error(err)
	}

	runtime.ReallyCrash = s.ReallyCrashForTesting
	rand.Seed(time.Now().UTC().UnixNano())

	// TODO(vmarmol): Do this through container config.
	oomAdjuster := kcfg.OOMAdjuster
	if err := oomAdjuster.ApplyOOMScoreAdj(0, int(s.OOMScoreAdj)); err != nil {
		glog.Warning(err)
	}

	if err := RunKubelet(kcfg); err != nil {
		return err
	}

	if s.HealthzPort > 0 {
		healthz.DefaultHealthz()
		go wait.Until(func() {
			err := http.ListenAndServe(net.JoinHostPort(s.HealthzBindAddress, strconv.Itoa(int(s.HealthzPort))), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second, wait.NeverStop)
	}

	if s.RunOnce {
		return nil
	}

	<-done
	return nil
}
示例#15
0
// RunKubelet is responsible for setting up and running a kubelet.  It is used in three different applications:
//   1 Integration tests
//   2 Kubelet binary
//   3 Standalone 'kubernetes' binary
// Eventually, #2 will be replaced with instances of #3
func RunKubelet(kcfg *KubeletConfig) error {
	kcfg.Hostname = nodeutil.GetHostname(kcfg.HostnameOverride)

	if len(kcfg.NodeName) == 0 {
		// Query the cloud provider for our node name, default to Hostname
		nodeName := kcfg.Hostname
		if kcfg.Cloud != nil {
			var err error
			instances, ok := kcfg.Cloud.Instances()
			if !ok {
				return fmt.Errorf("failed to get instances from cloud provider")
			}

			nodeName, err = instances.CurrentNodeName(kcfg.Hostname)
			if err != nil {
				return fmt.Errorf("error fetching current instance name from cloud provider: %v", err)
			}

			glog.V(2).Infof("cloud provider determined current node name to be %s", nodeName)
		}

		kcfg.NodeName = nodeName
	}

	eventBroadcaster := record.NewBroadcaster()
	kcfg.Recorder = eventBroadcaster.NewRecorder(api.EventSource{Component: "kubelet", Host: kcfg.NodeName})
	eventBroadcaster.StartLogging(glog.V(3).Infof)
	if kcfg.EventClient != nil {
		glog.V(4).Infof("Sending events to api server.")
		eventBroadcaster.StartRecordingToSink(&unversionedcore.EventSinkImpl{Interface: kcfg.EventClient.Events("")})
	} else {
		glog.Warning("No api server defined - no events will be sent to API server.")
	}

	privilegedSources := capabilities.PrivilegedSources{
		HostNetworkSources: kcfg.HostNetworkSources,
		HostPIDSources:     kcfg.HostPIDSources,
		HostIPCSources:     kcfg.HostIPCSources,
	}
	capabilities.Setup(kcfg.AllowPrivileged, privilegedSources, 0)

	credentialprovider.SetPreferredDockercfgPath(kcfg.RootDirectory)
	glog.V(2).Infof("Using root directory: %v", kcfg.RootDirectory)

	builder := kcfg.Builder
	if builder == nil {
		builder = CreateAndInitKubelet
	}
	if kcfg.OSInterface == nil {
		kcfg.OSInterface = kubecontainer.RealOS{}
	}
	k, podCfg, err := builder(kcfg)
	if err != nil {
		return fmt.Errorf("failed to create kubelet: %v", err)
	}

	rlimit.RlimitNumFiles(kcfg.MaxOpenFiles)

	// TODO(dawnchen): remove this once we deprecated old debian containervm images.
	// This is a workaround for issue: https://github.com/opencontainers/runc/issues/726
	// The current chosen number is consistent with most of other os dist.
	const maxkeysPath = "/proc/sys/kernel/keys/root_maxkeys"
	const minKeys uint64 = 1000000
	key, err := ioutil.ReadFile(maxkeysPath)
	if err != nil {
		glog.Errorf("Cannot read keys quota in %s", maxkeysPath)
	} else {
		fields := strings.Fields(string(key))
		nkey, _ := strconv.ParseUint(fields[0], 10, 64)
		if nkey < minKeys {
			glog.Infof("Setting keys quota in %s to %d", maxkeysPath, minKeys)
			err = ioutil.WriteFile(maxkeysPath, []byte(fmt.Sprintf("%d", uint64(minKeys))), 0644)
			if err != nil {
				glog.Warningf("Failed to update %s: %v", maxkeysPath, err)
			}
		}
	}
	const maxbytesPath = "/proc/sys/kernel/keys/root_maxbytes"
	const minBytes uint64 = 25000000
	bytes, err := ioutil.ReadFile(maxbytesPath)
	if err != nil {
		glog.Errorf("Cannot read keys bytes in %s", maxbytesPath)
	} else {
		fields := strings.Fields(string(bytes))
		nbyte, _ := strconv.ParseUint(fields[0], 10, 64)
		if nbyte < minBytes {
			glog.Infof("Setting keys bytes in %s to %d", maxbytesPath, minBytes)
			err = ioutil.WriteFile(maxbytesPath, []byte(fmt.Sprintf("%d", uint64(minBytes))), 0644)
			if err != nil {
				glog.Warningf("Failed to update %s: %v", maxbytesPath, err)
			}
		}
	}

	// process pods and exit.
	if kcfg.Runonce {
		if _, err := k.RunOnce(podCfg.Updates()); err != nil {
			return fmt.Errorf("runonce failed: %v", err)
		}
		glog.Infof("Started kubelet %s as runonce", version.Get().String())
	} else {
		startKubelet(k, podCfg, kcfg)
		glog.Infof("Started kubelet %s", version.Get().String())
	}
	return nil
}
示例#16
0
文件: node.go 项目: pweil-/origin
// RunProxy starts the proxy
func (c *NodeConfig) RunProxy() {
	protocol := utiliptables.ProtocolIpv4
	bindAddr := net.ParseIP(c.ProxyConfig.BindAddress)
	if bindAddr.To4() == nil {
		protocol = utiliptables.ProtocolIpv6
	}

	portRange := utilnet.ParsePortRangeOrDie(c.ProxyConfig.PortRange)

	hostname := utilnode.GetHostname(c.KubeletServer.HostnameOverride)

	eventBroadcaster := record.NewBroadcaster()
	eventBroadcaster.StartRecordingToSink(c.Client.Events(""))
	recorder := eventBroadcaster.NewRecorder(kapi.EventSource{Component: "kube-proxy", Host: hostname})

	execer := kexec.New()
	dbus := utildbus.New()
	iptInterface := utiliptables.New(execer, dbus, protocol)

	var proxier proxy.ProxyProvider
	var endpointsHandler pconfig.EndpointsConfigHandler

	switch c.ProxyConfig.Mode {
	case componentconfig.ProxyModeIPTables:
		glog.V(0).Info("Using iptables Proxier.")
		if c.ProxyConfig.IPTablesMasqueradeBit == nil {
			// IPTablesMasqueradeBit must be specified or defaulted.
			glog.Fatalf("Unable to read IPTablesMasqueradeBit from config")
		}
		proxierIptables, err := iptables.NewProxier(
			iptInterface,
			utilsysctl.New(),
			execer,
			c.ProxyConfig.IPTablesSyncPeriod.Duration,
			c.ProxyConfig.MasqueradeAll,
			int(*c.ProxyConfig.IPTablesMasqueradeBit),
			c.ProxyConfig.ClusterCIDR,
			hostname,
			getNodeIP(c.Client, hostname),
		)
		if err != nil {
			if c.Containerized {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy: %v\n When running in a container, you must run the container in the host network namespace with --net=host and with --privileged", err)
			} else {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy. You must run this process as root to use the service proxy: %v", err)
			}
		}
		proxier = proxierIptables
		endpointsHandler = proxierIptables
		// No turning back. Remove artifacts that might still exist from the userspace Proxier.
		glog.V(0).Info("Tearing down userspace rules.")
		userspace.CleanupLeftovers(iptInterface)
	case componentconfig.ProxyModeUserspace:
		glog.V(0).Info("Using userspace Proxier.")
		// This is a proxy.LoadBalancer which NewProxier needs but has methods we don't need for
		// our config.EndpointsConfigHandler.
		loadBalancer := userspace.NewLoadBalancerRR()
		// set EndpointsConfigHandler to our loadBalancer
		endpointsHandler = loadBalancer

		proxierUserspace, err := userspace.NewProxier(
			loadBalancer,
			bindAddr,
			iptInterface,
			*portRange,
			c.ProxyConfig.IPTablesSyncPeriod.Duration,
			c.ProxyConfig.UDPIdleTimeout.Duration,
		)
		if err != nil {
			if c.Containerized {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy: %v\n When running in a container, you must run the container in the host network namespace with --net=host and with --privileged", err)
			} else {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy. You must run this process as root to use the service proxy: %v", err)
			}
		}
		proxier = proxierUserspace
		// Remove artifacts from the pure-iptables Proxier.
		glog.V(0).Info("Tearing down pure-iptables proxy rules.")
		iptables.CleanupLeftovers(iptInterface)
	default:
		glog.Fatalf("Unknown proxy mode %q", c.ProxyConfig.Mode)
	}

	// Create configs (i.e. Watches for Services and Endpoints)
	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.
	serviceConfig := pconfig.NewServiceConfig()

	if c.EnableUnidling {
		unidlingLoadBalancer := ouserspace.NewLoadBalancerRR()
		signaler := unidler.NewEventSignaler(recorder)
		unidlingUserspaceProxy, err := unidler.NewUnidlerProxier(unidlingLoadBalancer, bindAddr, iptInterface, execer, *portRange, c.ProxyConfig.IPTablesSyncPeriod.Duration, c.ProxyConfig.UDPIdleTimeout.Duration, signaler)
		if err != nil {
			if c.Containerized {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy: %v\n When running in a container, you must run the container in the host network namespace with --net=host and with --privileged", err)
			} else {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy. You must run this process as root to use the service proxy: %v", err)
			}
		}
		hybridProxier, err := hybrid.NewHybridProxier(unidlingLoadBalancer, unidlingUserspaceProxy, endpointsHandler, proxier, c.ProxyConfig.IPTablesSyncPeriod.Duration, serviceConfig)
		if err != nil {
			if c.Containerized {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy: %v\n When running in a container, you must run the container in the host network namespace with --net=host and with --privileged", err)
			} else {
				glog.Fatalf("error: Could not initialize Kubernetes Proxy. You must run this process as root to use the service proxy: %v", err)
			}
		}
		endpointsHandler = hybridProxier
		proxier = hybridProxier
	}

	iptInterface.AddReloadFunc(proxier.Sync)
	serviceConfig.RegisterHandler(proxier)

	endpointsConfig := pconfig.NewEndpointsConfig()
	// customized handling registration that inserts a filter if needed
	if c.FilteringEndpointsHandler != nil {
		if err := c.FilteringEndpointsHandler.Start(endpointsHandler); err != nil {
			glog.Fatalf("error: node proxy plugin startup failed: %v", err)
		}
		endpointsHandler = c.FilteringEndpointsHandler
	}
	endpointsConfig.RegisterHandler(endpointsHandler)

	c.ServiceStore = pconfig.NewServiceStore(c.ServiceStore, serviceConfig.Channel("api"))
	c.EndpointsStore = pconfig.NewEndpointsStore(c.EndpointsStore, endpointsConfig.Channel("api"))
	// will be started by RunServiceStores

	recorder.Eventf(c.ProxyConfig.NodeRef, kapi.EventTypeNormal, "Starting", "Starting kube-proxy.")

	// periodically sync k8s iptables rules
	go utilwait.Forever(proxier.SyncLoop, 0)
	glog.Infof("Started Kubernetes Proxy on %s", c.ProxyConfig.BindAddress)
}
示例#17
0
// Run runs the specified ProxyServer.  This should never exit (unless CleanupAndExit is set).
func (s *ProxyServer) Run(_ []string) error {
	protocol := utiliptables.ProtocolIpv4
	if s.BindAddress.To4() == nil {
		protocol = utiliptables.ProtocolIpv6
	}

	// remove iptables rules and exit
	if s.CleanupAndExit {
		execer := exec.New()
		ipt := utiliptables.New(execer, protocol)
		encounteredError := userspace.CleanupLeftovers(ipt)
		encounteredError = iptables.CleanupLeftovers(ipt) || encounteredError
		if encounteredError {
			return errors.New("Encountered an error while tearing down rules.")
		}
		return nil
	}

	// TODO(vmarmol): Use container config for this.
	oomAdjuster := oom.NewOomAdjuster()
	if err := oomAdjuster.ApplyOomScoreAdj(0, s.OOMScoreAdj); err != nil {
		glog.V(2).Info(err)
	}

	// Run in its own container.
	if err := util.RunInResourceContainer(s.ResourceContainer); err != nil {
		glog.Warningf("Failed to start in resource-only container %q: %v", s.ResourceContainer, err)
	} else {
		glog.V(2).Infof("Running in resource-only container %q", s.ResourceContainer)
	}

	// define api config source
	if s.Kubeconfig == "" && s.Master == "" {
		glog.Warningf("Neither --kubeconfig nor --master was specified.  Using default API client.  This might not work.")
	}

	// This creates a client, first loading any specified kubeconfig
	// file, and then overriding the Master flag, if non-empty.
	kubeconfig, err := clientcmd.NewNonInteractiveDeferredLoadingClientConfig(
		&clientcmd.ClientConfigLoadingRules{ExplicitPath: s.Kubeconfig},
		&clientcmd.ConfigOverrides{ClusterInfo: clientcmdapi.Cluster{Server: s.Master}}).ClientConfig()
	if err != nil {
		return err
	}

	client, err := client.New(kubeconfig)
	if err != nil {
		glog.Fatalf("Invalid API configuration: %v", err)
	}

	// Add event recorder
	Hostname := nodeutil.GetHostname(s.HostnameOverride)
	eventBroadcaster := record.NewBroadcaster()
	s.Recorder = eventBroadcaster.NewRecorder(api.EventSource{Component: "kube-proxy", Host: Hostname})
	eventBroadcaster.StartRecordingToSink(client.Events(""))

	s.nodeRef = &api.ObjectReference{
		Kind:      "Node",
		Name:      Hostname,
		UID:       types.UID(Hostname),
		Namespace: "",
	}

	// Birth Cry
	s.birthCry()

	serviceConfig := config.NewServiceConfig()
	endpointsConfig := config.NewEndpointsConfig()

	var proxier proxy.ProxyProvider
	var endpointsHandler config.EndpointsConfigHandler

	// guaranteed false on error, error only necessary for debugging
	shouldUseIptables, err := iptables.ShouldUseIptablesProxier()
	if err != nil {
		glog.Errorf("Can't determine whether to use iptables or userspace, using userspace proxier: %v", err)
	}
	if !s.ForceUserspaceProxy && shouldUseIptables {
		glog.V(2).Info("Using iptables Proxier.")

		execer := exec.New()
		ipt := utiliptables.New(execer, protocol)
		proxierIptables, err := iptables.NewProxier(ipt, execer, s.SyncPeriod, s.MasqueradeAll)
		if err != nil {
			glog.Fatalf("Unable to create proxier: %v", err)
		}
		proxier = proxierIptables
		endpointsHandler = proxierIptables
		// No turning back. Remove artifacts that might still exist from the userspace Proxier.
		glog.V(2).Info("Tearing down userspace rules. Errors here are acceptable.")
		userspace.CleanupLeftovers(ipt)

	} else {
		glog.V(2).Info("Using userspace Proxier.")
		// This is a proxy.LoadBalancer which NewProxier needs but has methods we don't need for
		// our config.EndpointsConfigHandler.
		loadBalancer := userspace.NewLoadBalancerRR()
		// set EndpointsConfigHandler to our loadBalancer
		endpointsHandler = loadBalancer

		execer := exec.New()
		ipt := utiliptables.New(execer, protocol)
		proxierUserspace, err := userspace.NewProxier(loadBalancer, s.BindAddress, ipt, s.PortRange, s.SyncPeriod)
		if err != nil {
			glog.Fatalf("Unable to create proxer: %v", err)
		}
		proxier = proxierUserspace
		// Remove artifacts from the pure-iptables Proxier.
		glog.V(2).Info("Tearing down pure-iptables proxy rules. Errors here are acceptable.")
		iptables.CleanupLeftovers(ipt)
	}

	// Wire proxier to handle changes to services
	serviceConfig.RegisterHandler(proxier)
	// And wire endpointsHandler to handle changes to endpoints to services
	endpointsConfig.RegisterHandler(endpointsHandler)

	// Note: RegisterHandler() calls need to happen before creation of Sources because sources
	// only notify on changes, and the initial update (on process start) may be lost if no handlers
	// are registered yet.

	config.NewSourceAPI(
		client,
		30*time.Second,
		serviceConfig.Channel("api"),
		endpointsConfig.Channel("api"),
	)

	if s.HealthzPort > 0 {
		go util.Until(func() {
			err := http.ListenAndServe(s.HealthzBindAddress.String()+":"+strconv.Itoa(s.HealthzPort), nil)
			if err != nil {
				glog.Errorf("Starting health server failed: %v", err)
			}
		}, 5*time.Second, util.NeverStop)
	}

	// Just loop forever for now...
	proxier.SyncLoop()
	return nil
}