示例#1
0
// formatQcow2 formats a partition with the default linux filesystem type.
func formatQcow2(dev string) error {
	// make an ext4 filesystem
	p := process("mkfs")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			dev,
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "mkfs")
	log.LogAll(stderr, log.INFO, "mkfs")

	log.Debug("formatting with with cmd: %v", cmd)
	return cmd.Run()
}
示例#2
0
文件: nbd.go 项目: npe9/minimega
// DisconnectDevice disconnects a given NBD using qemu-nbd.
func DisconnectDevice(dev string) error {
	// disconnect nbd
	p := process("qemu-nbd")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			"-d",
			dev,
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "qemu-nbd")
	log.LogAll(stderr, log.ERROR, "qemu-nbd")

	log.Debug("disconnecting nbd with cmd: %v", cmd)
	return cmd.Run()
}
示例#3
0
// extlinuxMBR installs the specified master boot record in the partition table
// for the provided device.
func extlinuxMBR(dev, mbr string) error {
	// dd the mbr image
	p := process("dd")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			fmt.Sprintf("if=%v", mbr),
			"conv=notrunc",
			"bs=440",
			"count=1",
			fmt.Sprintf("of=%v", dev),
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "dd")
	log.LogAll(stderr, log.INFO, "dd")

	log.Debug("installing mbr with cmd: %v", cmd)
	return cmd.Run()
}
示例#4
0
// umountQcow2 unmounts qcow2 image that was previously mounted with
// mountQcow2.
func umountQcow2(path string) error {
	// unmount
	p := process("umount")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			path,
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "umount")
	log.LogAll(stderr, log.ERROR, "umount")

	log.Debug("unmounting with cmd: %v", cmd)
	return cmd.Run()
}
示例#5
0
// copyQcow2 recursively copies files from src to dst using cp.
func copyQcow2(src, dst string) error {
	// copy everything over
	p := process("cp")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			"-a",
			"-v",
			src + "/.",
			dst,
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "cp")
	log.LogAll(stderr, log.ERROR, "cp")

	log.Debug("copy with with cmd: %v", cmd)
	return cmd.Run()
}
示例#6
0
// Debootstrap will invoke the debootstrap tool with a target build directory
// in build_path, using configuration from c.
func Debootstrap(buildPath string, c vmconfig.Config) error {
	p := process("debootstrap")

	// build debootstrap parameters
	var args []string
	args = append(args, "--variant=minbase")
	args = append(args, fmt.Sprintf("--include=%v", strings.Join(c.Packages, ",")))
	args = append(args, *f_branch)
	args = append(args, buildPath)
	args = append(args, *f_debian_mirror)

	log.Debugln("args:", args)

	cmd := exec.Command(p, args...)
	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}
	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}
	log.LogAll(stdout, log.INFO, "debootstrap")
	log.LogAll(stderr, log.ERROR, "debootstrap")

	err = cmd.Run()
	if err != nil {
		return err
	}
	return nil
}
示例#7
0
文件: post.go 项目: cdshann/minimega
// PostBuildCommands invokes any commands listed in the postbuild variable
// of a config file. It does so by copying the entire string of the postbuild
// variable into a bash script under /tmp of the build directory, and then
// executing it with bash inside of a chroot. Post build commands are executed
// in depth-first order.
func PostBuildCommands(buildPath string, c vmconfig.Config) error {
	for _, pb := range c.Postbuilds {
		log.Debugln("postbuild:", pb)

		tmpfile := buildPath + "/tmp/postbuild.bash"

		ioutil.WriteFile(tmpfile, []byte(pb), 0770)

		p := process("chroot")
		cmd := exec.Command(p, buildPath, "/bin/bash", "/tmp/postbuild.bash")
		stdout, err := cmd.StdoutPipe()
		if err != nil {
			return err
		}
		stderr, err := cmd.StderrPipe()
		if err != nil {
			return err
		}
		log.LogAll(stdout, log.INFO, "postbuild")
		log.LogAll(stderr, log.ERROR, "postbuild")

		err = cmd.Run()
		if err != nil {
			return err
		}
		os.Remove(tmpfile)
	}
	return nil
}
示例#8
0
// createQcow2 creates a target qcow2 image using qemu-img. Size specifies the
// size of the image in bytes but optional suffixes such as "K" and "G" can be
// used. See qemu-img(8) for details.
func createQcow2(target, size string) error {
	// create our qcow image
	p := process("qemu-img")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			"create",
			"-f",
			"qcow2",
			target,
			size,
		},
		Env: nil,
		Dir: "",
	}
	log.Debug("creating disk image with cmd: %v", cmd)

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "qemu-img")
	log.LogAll(stderr, log.ERROR, "qemu-img")

	return cmd.Run()
}
示例#9
0
// BuildRootFS generates simple rootfs a from the stage 1 directory.
func BuildRootFS(buildPath string, c vmconfig.Config) error {
	targetName := strings.Split(filepath.Base(c.Path), ".")[0] + "_rootfs"
	log.Debugln("using target name:", targetName)

	err := os.Mkdir(targetName, 0666)
	if err != nil {
		return err
	}

	p := process("cp")
	cmd := exec.Command(p, "-r", "-v", buildPath+"/.", targetName)
	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}
	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}
	log.LogAll(stdout, log.INFO, "cp")
	log.LogAll(stderr, log.ERROR, "cp")

	err = cmd.Run()
	if err != nil {
		return err
	}
	return nil
}
示例#10
0
func transcode(in, out string) error {
	p := "ffmpeg"

	var args []string
	args = append(args, "-f")
	args = append(args, "mjpeg")
	args = append(args, "-r")
	args = append(args, "10") // minimega uses 10 frames per second
	args = append(args, "-i")
	args = append(args, fmt.Sprintf("http://localhost:%v/%v", *f_port, in))
	args = append(args, out)

	log.Debugln("args:", args)

	cmd := exec.Command(p, args...)
	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}
	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}
	log.LogAll(stdout, log.INFO, "ffmpeg")
	log.LogAll(stderr, log.INFO, "ffmpeg")

	err = cmd.Run()
	if err != nil {
		return err
	}
	return nil
}
示例#11
0
文件: nbd.go 项目: npe9/minimega
// ConnectImage exports a image using the NBD protocol using the qemu-nbd. If
// successful, returns the NBD device.
func ConnectImage(image string) (string, error) {
	var nbdPath string
	var err error

	for i := 0; i < maxConnectRetries; i++ {
		nbdPath, err = GetDevice()
		if err != ErrNoDeviceAvailable {
			break
		}

		log.Debug("all nbds in use, sleeping before retrying")
		time.Sleep(time.Second * 10)
	}

	if err != nil {
		return "", err
	}

	// connect it to qemu-nbd
	p := process("qemu-nbd")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			"-c",
			nbdPath,
			image,
		},
		Env: nil,
		Dir: "",
	}
	log.Debug("connecting to nbd with cmd: %v", cmd)

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return "", err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return "", err
	}

	log.LogAll(stdout, log.INFO, "qemu-nbd")
	log.LogAll(stderr, log.ERROR, "qemu-nbd")

	err = cmd.Run()
	if err != nil {
		return "", err
	}
	return nbdPath, nil
}
示例#12
0
// Overlays copies any overlay directories indicated in c into the build
// directory build_path. Overlays are copied in depth-first order, so that
// the oldest parent overlay data is copied in first. This allows a child
// to overwrite any overlay data created by a parent.
func Overlays(buildPath string, c vmconfig.Config) error {
	// copy the overlays in order
	for i, o := range c.Overlays {
		log.Infoln("copying overlay:", o)

		var sourcePath string
		// check if overlay exists as absolute path or relative to cwd
		if _, err := os.Stat(o); os.IsNotExist(err) {
			// it doesn't, so we'll check relative to config file
			log.Debugln("overlay directory '%v' does not exist as an absolute path or relative to the current working directory.", o)
			var path string
			base := filepath.Base(o)    // get base path of overlay directory
			if i == len(c.Overlays)-1 { // if this is the last overlay, we'll check relative to c.Path
				log.Debugln("non-parent overlay")
				path = filepath.Join(filepath.Dir(c.Path), base)
			} else { // if not, it's a parent overlay and we'll check relative to c.Parents[i]
				log.Debugln("parent overlay")
				path = filepath.Join(filepath.Dir(c.Parents[i]), base)
			}
			log.Debugln("checking path relative to config location: '%v'", path)
			if _, err := os.Stat(path); os.IsNotExist(err) { // check if we can find overlay relative to config file
				return err // nope
			} else { // yep
				sourcePath = path
			}
		} else {
			sourcePath = o
		}

		p := process("cp")
		cmd := exec.Command(p, "-r", "-v", sourcePath+"/.", buildPath)
		stdout, err := cmd.StdoutPipe()
		if err != nil {
			return err
		}
		stderr, err := cmd.StderrPipe()
		if err != nil {
			return err
		}
		log.LogAll(stdout, log.INFO, "cp")
		log.LogAll(stderr, log.ERROR, "cp")

		err = cmd.Run()
		if err != nil {
			return err
		}
	}
	return nil
}
示例#13
0
// extlinux installs the SYSLINUX bootloader using extlinux. Path should be the
// root directory for the filesystem. extlinux also writes out a
// minimega-specific configuration file for SYSLINUX.
func extlinux(path string) error {
	// install extlinux
	p := process("extlinux")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			"--install",
			filepath.Join(path, "boot"),
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "extlinux")
	log.LogAll(stderr, log.INFO, "extlinux")

	log.Debug("installing bootloader with cmd: %v", cmd)
	err = cmd.Run()
	if err != nil {
		return err
	}

	// write out the bootloader config, but first figure out the kernel and
	// initrd files in /boot
	filepath.Walk(filepath.Join(path, "boot"), kernelWalker)
	if kernelName == "" {
		return fmt.Errorf("could not find kernel name")
	}
	if initrdName == "" {
		return fmt.Errorf("could not find initrd name")
	}

	extlinuxConfig := fmt.Sprintf("DEFAULT minimegalinux\nLABEL minimegalinux\nSAY booting minimegalinux\nLINUX /boot/%v\nAPPEND root=/dev/sda1\nINITRD /boot/%v", kernelName, initrdName)

	return ioutil.WriteFile(filepath.Join(path, "/boot/extlinux.conf"), []byte(extlinuxConfig), os.FileMode(0660))
}
示例#14
0
// BuildTargets generates the initrd and kernel files as the last stage of the
// build process. It does so by writing a find/cpio/gzip command as a script
// to a temporary file and executing that in a bash shell. The output filenames
// are equal to the base name of the input config file. So a config called
// 'my_vm.conf' will generate 'my_vm.initrd' and 'my_vm.kernel'. The kernel
// image is the one found in /boot of the build directory.
func BuildTargets(buildPath string, c vmconfig.Config) error {
	targetName := strings.Split(filepath.Base(c.Path), ".")[0]
	log.Debugln("using target name:", targetName)

	wd, err := os.Getwd()
	if err != nil {
		return err
	}

	targetInitrd := fmt.Sprintf("%v/%v.initrd", wd, targetName)
	targetKernel := fmt.Sprintf("%v/%v.kernel", wd, targetName)

	f, err := ioutil.TempFile("", "vmbetter_cpio")
	if err != nil {
		return err
	}

	eName := f.Name()
	initrdCommand := fmt.Sprintf("cd %v && find . -print0 | cpio --quiet --null -ov --format=newc | gzip -9 > %v\ncp boot/vmlinu* %v", buildPath, targetInitrd, targetKernel)
	f.WriteString(initrdCommand)
	f.Close()

	log.Debugln("initrd command:", initrdCommand)

	p := process("bash")
	cmd := exec.Command(p, eName)
	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}
	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}
	log.LogAll(stdout, log.INFO, "cpio")
	// the cpio command outputs regular stuff to stderr, so i have a hack to push all output to the INFO level, instead of INFO/ERROR
	log.LogAll(stderr, log.INFO, "cpio")

	err = cmd.Run()
	if err != nil {
		return err
	}
	os.Remove(eName)

	return nil
}
示例#15
0
// mountQcow2 mounts a partition to a temporary directory. If successful,
// returns the path to that temporary directory.
func mountQcow2(dev string) (string, error) {
	// mount the filesystem
	mountPath, err := ioutil.TempDir("", "vmbetter_mount_")
	if err != nil {
		log.Fatalln("cannot create temporary directory:", err)
	}
	log.Debugln("using mount path:", mountPath)
	p := process("mount")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			dev,
			mountPath,
		},
		Env: nil,
		Dir: "",
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return "", err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return "", err
	}

	log.LogAll(stdout, log.INFO, "mount")
	log.LogAll(stderr, log.ERROR, "mount")

	log.Debug("mounting with with cmd: %v", cmd)
	err = cmd.Run()
	if err != nil {
		return "", err
	}
	return mountPath, nil
}
示例#16
0
// partitionQcow2 partitions the provided device creating one primary partition
// that is the size of the whole device and bootable.
func partitionQcow2(dev string) error {
	// partition with fdisk
	p := process("fdisk")
	cmd := &exec.Cmd{
		Path: p,
		Args: []string{
			p,
			dev,
		},
		Env: nil,
		Dir: "",
	}
	sIn, err := cmd.StdinPipe()
	if err != nil {
		return err
	}

	stdout, err := cmd.StdoutPipe()
	if err != nil {
		return err
	}

	stderr, err := cmd.StderrPipe()
	if err != nil {
		return err
	}

	log.LogAll(stdout, log.INFO, "fdisk")
	log.LogAll(stderr, log.INFO, "fdisk")

	log.Debug("partitioning with cmd: %v", cmd)
	err = cmd.Start()
	if err != nil {
		return err
	}
	io.WriteString(sIn, "n\np\n1\n\n\na\n1\nw\n")
	return cmd.Wait()
}
示例#17
0
// BuildISO generates a bootable ISO from the stage 1 directory.
func BuildISO(buildPath string, c vmconfig.Config) error {
	targetName := strings.Split(filepath.Base(c.Path), ".")[0]
	log.Debugln("using target name:", targetName)

	// Set up a temporary directory
	tdir, err := ioutil.TempDir("", targetName)
	if err != nil {
		return err
	}

	liveDir := tdir + "/image/live/"
	isolinuxDir := tdir + "/image/isolinux/"

	err = os.MkdirAll(liveDir, os.ModeDir|0755)
	if err != nil {
		return err
	}
	err = os.MkdirAll(isolinuxDir, os.ModeDir|0755)
	if err != nil {
		return err
	}

	// Get the kernel path we'll be using
	matches, err := filepath.Glob(buildPath + "/boot/vmlinu*")
	if err != nil {
		return err
	}
	if len(matches) == 0 {
		return errors.New("couldn't find kernel")
	}
	kernel := matches[0]

	// Get the initrd path
	matches, err = filepath.Glob(buildPath + "/boot/initrd*")
	if err != nil {
		return err
	}
	if len(matches) == 0 {
		return errors.New("couldn't find initrd")
	}
	initrd := matches[0]

	log.Debugln("copy kernel")
	// Copy the kernel and initrd into the appropriate places
	p := process("cp")
	cmd := exec.Command(p, kernel, liveDir+"vmlinuz")
	err = cmd.Run()
	if err != nil {
		return err
	}

	cmd = exec.Command(p, initrd, liveDir+"initrd")
	err = cmd.Run()
	if err != nil {
		return err
	}

	log.Debugln("copy isolinux")
	// Copy over the ISOLINUX stuff
	matches, err = filepath.Glob(*f_isolinux + "/*")
	if err != nil {
		return err
	}
	for _, m := range matches {
		cmd = exec.Command(p, m, isolinuxDir)
		err = cmd.Run()
		if err != nil {
			return err
		}
	}

	log.Debugln("make squashfs")
	// Now compress the chroot
	p = process("mksquashfs")
	cmd = exec.Command(p, buildPath, liveDir+"filesystem.squashfs", "-e", "boot")
	err = cmd.Run()
	if err != nil {
		return err
	}

	log.Debugln("genisoimage")
	// Finally, run genisoimage
	//genisoimage -rational-rock -volid "Minimega" -cache-inodes -joliet -full-iso9660-filenames -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -output ../minimega.iso .
	p = process("genisoimage")
	cmd = exec.Command(p, "-rational-rock", "-volid", "\"Minimega\"", "-cache-inodes", "-joliet", "-full-iso9660-filenames", "-b", "isolinux/isolinux.bin", "-c", "isolinux/boot.cat", "-no-emul-boot", "-boot-load-size", "4", "-boot-info-table", "-output", targetName+".iso", tdir+"/image")
	stdout, err := cmd.StdoutPipe()
	if err != nil {
		log.Fatalln(err)
	}
	stderr, err := cmd.StderrPipe()
	if err != nil {
		log.Fatalln(err)
	}
	log.LogAll(stdout, log.INFO, "genisoimage")
	log.LogAll(stderr, log.ERROR, "genisoimage")

	err = cmd.Run()
	if err != nil {
		return err
	}

	// clean up
	err = os.RemoveAll(tdir)
	if err != nil {
		return err
	}

	return nil
}
示例#18
0
// launch is the low-level launch function for Container VMs. The caller should
// hold the VM's lock.
func (vm *ContainerVM) launch() error {
	log.Info("launching vm: %v", vm.ID)

	err := containerInit()
	if err != nil {
		log.Errorln(err)
		vm.setError(err)
		return err
	}
	if !containerInitSuccess {
		err = fmt.Errorf("cgroups are not initialized, cannot continue")
		log.Errorln(err)
		vm.setError(err)
		return err
	}

	// If this is the first time launching the VM, do the final configuration
	// check, create a directory for it, and setup the FS.
	if vm.State == VM_BUILDING {
		if err := os.MkdirAll(vm.instancePath, os.FileMode(0700)); err != nil {
			teardownf("unable to create VM dir: %v", err)
		}

		if vm.Snapshot {
			if err := vm.overlayMount(); err != nil {
				log.Error("overlayMount: %v", err)
				vm.setError(err)
				return err
			}
		} else {
			vm.effectivePath = vm.FSPath
		}
	}

	// write the config for this vm
	config := vm.BaseConfig.String() + vm.ContainerConfig.String()
	writeOrDie(vm.path("config"), config)
	writeOrDie(vm.path("name"), vm.Name)

	// the child process will communicate with a fake console using pipes
	// to mimic stdio, and a fourth pipe for logging before the child execs
	// into the init program
	// two additional pipes are needed to synchronize freezing the child
	// before it enters the container
	parentLog, childLog, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setError(err)
		return err
	}
	parentSync1, childSync1, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setError(err)
		return err
	}
	childSync2, parentSync2, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setError(err)
		return err
	}

	// create the uuid path that will bind mount into sysfs in the
	// container
	uuidPath := vm.path("uuid")
	ioutil.WriteFile(uuidPath, []byte(vm.UUID+"\n"), 0400)

	// create fifos
	for i := 0; i < vm.Fifos; i++ {
		p := vm.path(fmt.Sprintf("fifo%v", i))
		if err = syscall.Mkfifo(p, 0660); err != nil {
			log.Error("fifo: %v", err)
			vm.setError(err)
			return err
		}
	}

	//	0 :  minimega binary
	// 	1 :  CONTAINER
	//	2 :  instance path
	//	3 :  vm id
	//	4 :  hostname ("CONTAINER_NONE" if none)
	//	5 :  filesystem path
	//	6 :  memory in megabytes
	//	7 :  uuid
	//	8 :  number of fifos
	//	9 :  init program (relative to filesystem path)
	//	10:  init args
	hn := vm.Hostname
	if hn == "" {
		hn = CONTAINER_NONE
	}
	preinit := vm.Preinit
	if preinit == "" {
		preinit = CONTAINER_NONE
	}
	args := []string{
		os.Args[0],
		"-base",
		*f_base,
		CONTAINER_MAGIC,
		vm.instancePath,
		fmt.Sprintf("%v", vm.ID),
		hn,
		vm.effectivePath,
		vm.Memory,
		uuidPath,
		fmt.Sprintf("%v", vm.Fifos),
		preinit,
	}
	args = append(args, vm.Init...)

	// launch the container
	cmd := &exec.Cmd{
		Path: "/proc/self/exe",
		Args: args,
		ExtraFiles: []*os.File{
			childLog,
			childSync1,
			childSync2,
		},
		SysProcAttr: &syscall.SysProcAttr{
			Cloneflags: uintptr(CONTAINER_FLAGS),
		},
	}

	// Start the child and give it a pty
	pseudotty, err := pty.Start(cmd)
	if err != nil {
		vm.overlayUnmount()
		log.Error("start container: %v", err)
		vm.setError(err)
		return err
	}

	vm.pid = cmd.Process.Pid
	log.Debug("vm %v has pid %v", vm.ID, vm.pid)

	// log the child
	childLog.Close()
	log.LogAll(parentLog, log.DEBUG, "containerShim")

	go vm.console(pseudotty)

	// TODO: add affinity funcs for containers
	// vm.CheckAffinity()

	// network creation for containers happens /after/ the container is
	// started, as we need the PID in order to attach a veth to the container
	// side of the network namespace. That means that unlike kvm vms, we MUST
	// create/destroy taps on launch/kill boundaries (kvm destroys taps on
	// flush).
	if err = vm.launchNetwork(); err != nil {
		log.Errorln(err)
	}

	childSync1.Close()
	if err == nil {
		// wait for the freezer notification
		var buf = make([]byte, 1)
		parentSync1.Read(buf)

		err = vm.freeze()

		parentSync2.Close()
	} else {
		parentSync1.Close()
		parentSync2.Close()
	}

	ccPath := filepath.Join(vm.effectivePath, "cc")

	if err == nil {
		// connect cc. Note that we have a local err here because we don't want
		// to prevent the VM from continuing to launch, even if we can't
		// connect to cc.
		if err := ccNode.ListenUnix(ccPath); err != nil {
			log.Warn("unable to connect to cc for vm %v: %v", vm.ID, err)
		}
	}

	if err != nil {
		// Some error occurred.. clean up the process
		cmd.Process.Kill()

		vm.setError(err)
		return err
	}

	// Channel to signal when the process has exited
	errChan := make(chan error)

	// Create goroutine to wait for process to exit
	go func() {
		defer close(errChan)

		errChan <- cmd.Wait()
	}()

	go func() {
		cgroupFreezerPath := filepath.Join(*f_cgroup, "freezer", "minimega", fmt.Sprintf("%v", vm.ID))
		cgroupMemoryPath := filepath.Join(*f_cgroup, "memory", "minimega", fmt.Sprintf("%v", vm.ID))
		cgroupDevicesPath := filepath.Join(*f_cgroup, "devices", "minimega", fmt.Sprintf("%v", vm.ID))
		sendKillAck := false

		select {
		case err := <-errChan:
			log.Info("VM %v exited", vm.ID)

			vm.lock.Lock()
			defer vm.lock.Unlock()

			// we don't need to check the error for a clean kill,
			// as there's no way to get here if we killed it.
			if err != nil {
				log.Error("kill container: %v", err)
				vm.setError(err)
			}
		case <-vm.kill:
			log.Info("Killing VM %v", vm.ID)

			vm.lock.Lock()
			defer vm.lock.Unlock()

			cmd.Process.Kill()

			// containers cannot exit unless thawed, so thaw it if necessary
			if err := vm.thaw(); err != nil {
				log.Errorln(err)
				vm.setError(err)
			}

			// wait for the taskset to actually exit (from uninterruptible
			// sleep state).
			for {
				t, err := ioutil.ReadFile(filepath.Join(cgroupFreezerPath, "tasks"))
				if err != nil {
					log.Errorln(err)
					vm.setError(err)
					break
				}
				if len(t) == 0 {
					break
				}

				count := strings.Count(string(t), "\n")
				log.Info("waiting on %d tasks for VM %v", count, vm.ID)
				time.Sleep(100 * time.Millisecond)
			}

			// drain errChan
			for err := range errChan {
				log.Debug("kill container: %v", err)
			}

			sendKillAck = true // wait to ack until we've cleaned up
		}

		if vm.ptyUnixListener != nil {
			vm.ptyUnixListener.Close()
		}
		if vm.ptyTCPListener != nil {
			vm.ptyTCPListener.Close()
		}

		// cleanup cc domain socket
		ccNode.CloseUnix(ccPath)

		vm.unlinkNetns()

		for _, net := range vm.Networks {
			br, err := getBridge(net.Bridge)
			if err != nil {
				log.Error("get bridge: %v", err)
			} else {
				br.DestroyTap(net.Tap)
			}
		}

		// clean up the cgroup directory
		if err := os.Remove(cgroupFreezerPath); err != nil {
			log.Errorln(err)
		}
		if err := os.Remove(cgroupMemoryPath); err != nil {
			log.Errorln(err)
		}
		if err := os.Remove(cgroupDevicesPath); err != nil {
			log.Errorln(err)
		}

		if vm.State != VM_ERROR {
			// Set to QUIT unless we've already been put into the error state
			vm.setState(VM_QUIT)
		}

		if sendKillAck {
			killAck <- vm.ID
		}
	}()

	return nil
}
示例#19
0
func (vm *ContainerVM) launch(ack chan int) {
	log.Info("launching vm: %v", vm.ID)

	if !cgroupInitialized {
		err := containerInit()
		if err != nil {
			log.Errorln(err)
			vm.setState(VM_ERROR)
			ack <- vm.ID
			return
		}
		cgroupInitialized = true
	}

	s := vm.GetState()

	// don't repeat the preamble if we're just in the quit state
	if s != VM_QUIT && !vm.launchPreamble(ack) {
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}

	vm.setState(VM_BUILDING)

	// write the config for this vm
	writeOrDie(filepath.Join(vm.instancePath, "config"), vm.Config().String())
	writeOrDie(filepath.Join(vm.instancePath, "name"), vm.Name)

	var waitChan = make(chan int)

	// clear taps, we may have come from the quit state
	for i := range vm.Networks {
		vm.Networks[i].Tap = ""
	}

	if vm.Snapshot {
		err := vm.overlayMount()
		if err != nil {
			log.Error("overlayMount: %v", err)
			vm.setState(VM_ERROR)
			ack <- vm.ID
			return
		}
	} else {
		vm.effectivePath = vm.FSPath
	}

	// the child process will communicate with a fake console using pipes
	// to mimic stdio, and a fourth pipe for logging before the child execs
	// into the init program
	// two additional pipes are needed to synchronize freezing the child
	// before it enters the container
	parentLog, childLog, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}
	childStdin, parentStdin, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}
	parentStdout, childStdout, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}
	parentStderr, childStderr, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}
	parentSync1, childSync1, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}
	childSync2, parentSync2, err := os.Pipe()
	if err != nil {
		log.Error("pipe: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}

	// create the uuid path that will bind mount into sysfs in the
	// container
	uuidPath := filepath.Join(vm.instancePath, "uuid")
	ioutil.WriteFile(uuidPath, []byte(vm.UUID+"\n"), 0400)

	// create fifos
	for i := 0; i < vm.Fifos; i++ {
		p := filepath.Join(vm.instancePath, fmt.Sprintf("fifo%v", i))
		err := syscall.Mkfifo(p, 0660)
		if err != nil {
			log.Error("fifo: %v", err)
			vm.setState(VM_ERROR)
			ack <- vm.ID
			return
		}
	}

	//	0 :  minimega binary
	// 	1 :  CONTAINER
	//	2 :  instance path
	//	3 :  vm id
	//	4 :  hostname ("CONTAINER_NONE" if none)
	//	5 :  filesystem path
	//	6 :  memory in megabytes
	//	7 :  uuid
	//	8 :  number of fifos
	//	9 :  init program (relative to filesystem path)
	//	10:  init args
	hn := vm.Hostname
	if hn == "" {
		hn = CONTAINER_NONE
	}
	args := []string{
		os.Args[0],
		CONTAINER_MAGIC,
		vm.instancePath,
		fmt.Sprintf("%v", vm.ID),
		hn,
		vm.effectivePath,
		vm.Memory,
		uuidPath,
		fmt.Sprintf("%v", vm.Fifos),
	}
	args = append(args, vm.Init...)

	// launch the container
	cmd := &exec.Cmd{
		Path: "/proc/self/exe",
		Args: args,
		Env:  nil,
		Dir:  "",
		ExtraFiles: []*os.File{
			childLog,
			childSync1,
			childSync2,
			childStdin,
			childStdout,
			childStderr,
		},
		SysProcAttr: &syscall.SysProcAttr{
			Cloneflags: uintptr(CONTAINER_FLAGS),
		},
	}
	err = cmd.Start()
	if err != nil {
		vm.overlayUnmount()
		log.Error("start container: %v", err)
		vm.setState(VM_ERROR)
		ack <- vm.ID
		return
	}

	vm.pid = cmd.Process.Pid
	log.Debug("vm %v has pid %v", vm.ID, vm.pid)

	// log the child
	childLog.Close()
	log.LogAll(parentLog, log.DEBUG, "containerShim")

	go vm.console(parentStdin, parentStdout, parentStderr)

	go func() {
		err := cmd.Wait()
		vm.setState(VM_QUIT)
		if err != nil {
			if err.Error() != "signal: killed" { // because we killed it
				log.Error("kill container: %v", err)
				vm.setState(VM_ERROR)
			}
		}
		waitChan <- vm.ID
	}()

	// we can't just return on error at this point because we'll
	// leave dangling goroutines, we have to clean up on failure
	success := true
	sendKillAck := false

	// TODO: add affinity funcs for containers
	// vm.CheckAffinity()

	// network creation for containers happens /after/ the container is
	// started, as we need the PID in order to attach a veth to the
	// container side of the network namespace.
	// create and add taps if we are associated with any networks

	// expose the network namespace to iptool
	err = vm.symlinkNetns()
	if err != nil {
		log.Error("symlinkNetns: %v", err)
		vm.setState(VM_ERROR)
		cmd.Process.Kill()
		<-waitChan
		success = false
	}

	if success {
		for i := range vm.Networks {
			net := &vm.Networks[i]

			b, err := getBridge(net.Bridge)
			if err != nil {
				log.Error("get bridge: %v", err)
				vm.setState(VM_ERROR)
				cmd.Process.Kill()
				<-waitChan
				success = false
				break
			}

			net.Tap, err = b.ContainerTapCreate(net.VLAN, vm.netns, net.MAC, i)
			if err != nil {
				log.Error("create tap: %v", err)
				vm.setState(VM_ERROR)
				cmd.Process.Kill()
				<-waitChan
				success = false
				break
			}

			updates := make(chan ipmac.IP)
			go func(vm *ContainerVM, net *NetConfig) {
				defer close(updates)
				for {
					// TODO: need to acquire VM lock?
					select {
					case update := <-updates:
						if update.IP4 != "" {
							net.IP4 = update.IP4
						} else if net.IP6 != "" && strings.HasPrefix(update.IP6, "fe80") {
							log.Debugln("ignoring link-local over existing IPv6 address")
						} else if update.IP6 != "" {
							net.IP6 = update.IP6
						}
					case <-vm.kill:
						b.iml.DelMac(net.MAC)
						return
					}
				}
			}(vm, net)

			b.iml.AddMac(net.MAC, updates)
		}
	}

	if success {
		if len(vm.Networks) > 0 {
			taps := []string{}
			for _, net := range vm.Networks {
				taps = append(taps, net.Tap)
			}

			err := ioutil.WriteFile(filepath.Join(vm.instancePath, "taps"), []byte(strings.Join(taps, "\n")), 0666)
			if err != nil {
				log.Error("write instance taps file: %v", err)
				vm.setState(VM_ERROR)
				cmd.Process.Kill()
				<-waitChan
				success = false
			}
		}
	}

	childSync1.Close()
	if success {
		// wait for the freezer notification
		var buf = make([]byte, 1)
		parentSync1.Read(buf)
		freezer := filepath.Join(CGROUP_PATH, fmt.Sprintf("%v", vm.ID), "freezer.state")
		err = ioutil.WriteFile(freezer, []byte("FROZEN"), 0644)
		if err != nil {
			log.Error("freezer: %v", err)
			vm.setState(VM_ERROR)
			cmd.Process.Kill()
			<-waitChan
			success = false
		}
		parentSync2.Close()
	} else {
		parentSync1.Close()
		parentSync2.Close()
	}

	// connect cc
	ccPath := filepath.Join(vm.effectivePath, "cc")
	err = ccNode.ListenUnix(ccPath)
	if err != nil {
		log.Errorln(err)
	}

	ack <- vm.ID

	if success {
		select {
		case <-waitChan:
			log.Info("VM %v exited", vm.ID)
		case <-vm.kill:
			log.Info("Killing VM %v", vm.ID)
			cmd.Process.Kill()

			// containers cannot return unless thawed, so thaw the
			// process if necessary
			freezer := filepath.Join(CGROUP_PATH, fmt.Sprintf("%v", vm.ID), "freezer.state")
			err = ioutil.WriteFile(freezer, []byte("THAWED"), 0644)
			if err != nil {
				log.Error("freezer: %v", err)
				vm.setState(VM_ERROR)
				<-waitChan
			}

			<-waitChan
			sendKillAck = true // wait to ack until we've cleaned up
		}
	}

	err = ccNode.CloseUDS(ccPath)
	if err != nil {
		log.Errorln(err)
	}

	vm.listener.Close()
	vm.unlinkNetns()

	for _, net := range vm.Networks {
		b, err := getBridge(net.Bridge)
		if err != nil {
			log.Error("get bridge: %v", err)
		} else {
			b.ContainerTapDestroy(net.VLAN, net.Tap)
		}
	}

	// clean up the cgroup directory
	cgroupPath := filepath.Join(CGROUP_PATH, fmt.Sprintf("%v", vm.ID))
	err = os.Remove(cgroupPath)
	if err != nil {
		log.Errorln(err)
	}

	// umount the overlay, if any
	if vm.Snapshot {
		vm.overlayUnmount()
	}

	if sendKillAck {
		killAck <- vm.ID
	}
}
示例#20
0
文件: main.go 项目: npe9/minimega
func main() {
	flag.Usage = usage
	flag.Parse()

	logSetup()

	if flag.NArg() != 1 {
		usage()
		os.Exit(1)
	}

	externalCheck()

	// stage 1 and stage 2 flags are mutually exclusive
	if *f_stage1 && *f_stage2 != "" {
		log.Fatalln("-1 cannot be used with -2")
	}

	// find any other dependent configs and get an ordered list of those
	configfile := flag.Arg(0)
	log.Debugln("using config:", configfile)
	config, err := vmconfig.ReadConfig(configfile)
	if err != nil {
		log.Fatalln(err)
	} else {
		log.Debugln("read config:", config)
	}

	// If we're doing a LiveCD, we need to add the live-boot package
	if *f_iso {
		config.Packages = append(config.Packages, "live-boot")
	}

	var buildPath string

	// stage 1
	if *f_stage2 == "" {
		// create a build path
		buildPath, err = ioutil.TempDir("", "vmbetter_build_")
		if err != nil {
			log.Fatalln("cannot create temporary directory:", err)
		}
		log.Debugln("using build path:", buildPath)

		// invoke debootstrap
		fmt.Println("invoking debootstrap (this may take a while)...")
		err = Debootstrap(buildPath, config)
		if err != nil {
			log.Fatalln(err)
		}

		// copy any overlay into place in reverse order of opened dependencies
		fmt.Println("copying overlays")
		err = Overlays(buildPath, config)
		if err != nil {
			log.Fatalln(err)
		}

		//
		// stage 1 complete
		//

		if *f_stage1 {
			stage1Target := strings.Split(filepath.Base(config.Path), ".")[0] + "_stage1"
			log.Infoln("writing stage 1 target", stage1Target)

			err = os.Mkdir(stage1Target, 0666)
			if err != nil {
				log.Fatalln(err)
			}

			p := process("cp")
			cmd := exec.Command(p, "-r", "-v", buildPath+"/.", stage1Target)
			stdout, err := cmd.StdoutPipe()
			if err != nil {
				log.Fatalln(err)
			}
			stderr, err := cmd.StderrPipe()
			if err != nil {
				log.Fatalln(err)
			}
			log.LogAll(stdout, log.INFO, "cp")
			log.LogAll(stderr, log.ERROR, "cp")

			err = cmd.Run()
			if err != nil {
				log.Fatalln(err)
			}
		}
	} else {
		buildPath = *f_stage2
	}

	// stage 2
	if *f_stage2 != "" || !*f_stage1 {
		// call post build chroot commands in reverse order as well
		fmt.Println("executing post-build commands")
		err = PostBuildCommands(buildPath, config)
		if err != nil {
			log.Fatalln(err)
		}

		// build the image file
		fmt.Println("building target files")
		if *f_qcow {
			err = Buildqcow2(buildPath, config)
		} else if *f_iso {
			err = BuildISO(buildPath, config)
		} else {
			err = BuildTargets(buildPath, config)
		}
		if err != nil {
			log.Fatalln(err)
		}
	}

	// cleanup?
	if !*f_noclean && *f_stage2 == "" {
		fmt.Println("cleaning up")
		err = os.RemoveAll(buildPath)
		if err != nil {
			log.Errorln(err)
		}
	}
	fmt.Println("done")
}