示例#1
0
func handleClient(source *net.TCPConn) {
	atomic.AddInt32(&daemon.status.actives, 1)
	defer func() {
		atomic.AddInt32(&daemon.status.actives, -1)
		daemon.wg.Done()
	}()

	// read req
	err, req := ReadReq(source)
	if err != nil {
		source.Close()
		Error("conn:%v, read req failed:%v", source.RemoteAddr(), err)
		return
	}

	source.SetKeepAlive(true)
	source.SetKeepAlivePeriod(time.Second * 60)
	source.SetLinger(-1)

	// judge: new conn or reuse conn
	switch req := req.(type) {
	case *NewConnReq:
		Info("new conn request:%v", req)
		onNewConn(source, req)
	case *ReuseConnReq:
		Info("reuse conn request:%v", req)
		onReuseConn(source, req)
	default:
		Info("unknown request:%v", req)
		source.Close()
		return
	}
}
示例#2
0
文件: link.go 项目: yongshun/gotunnel
func (h *Hub) startLink(l *link, conn *net.TCPConn) {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second * 60)
	l.setConn(conn)

	Info("link(%d) start: %v", l.id, conn.RemoteAddr())
	var wg sync.WaitGroup
	wg.Add(1)
	go func() {
		defer wg.Done()
		for {
			data, err := l.read()
			if err != nil {
				if err != errPeerClosed {
					h.SendCmd(l.id, LINK_CLOSE_SEND)
				}
				break
			}

			h.Send(l.id, data)
		}
	}()

	wg.Add(1)
	go func() {
		defer wg.Done()
		err := l._write()
		if err != errPeerClosed {
			h.SendCmd(l.id, LINK_CLOSE_RECV)
		}
	}()
	wg.Wait()
	Info("link(%d) close", l.id)
}
示例#3
0
文件: gopf.go 项目: no2key/gopf
func handleClient(pf *PF, source *net.TCPConn) {
	atomic.AddInt32(&pf.status.actives, 1)
	defer func() {
		atomic.AddInt32(&pf.status.actives, -1)
		pf.wg.Done()
	}()

	settings := pf.settings
	host := chooseHost(settings.weight, settings.Hosts)
	if host == nil {
		source.Close()
		logger.Println("choose host failed")
		return
	}

	dest, err := net.DialTCP("tcp", nil, host.addr)
	if err != nil {
		source.Close()
		logger.Printf("connect to %s failed: %s", host.addr, err.Error())
		return
	}

	source.SetKeepAlive(true)
	source.SetKeepAlivePeriod(time.Second * 60)
	source.SetLinger(-1)
	dest.SetLinger(-1)

	go forward(source, dest)
	forward(dest, source)
	//logger.Printf("forward finished, %v -> %v", source.RemoteAddr(), host)
}
示例#4
0
func (this *GoServer) SetDefaultOptions(conn *net.TCPConn) {
	conn.SetKeepAlive(true)
	interval, err := time.ParseDuration("45s")
	if err != nil {
		conn.SetKeepAlivePeriod(interval)
	}
	conn.SetNoDelay(true)
}
示例#5
0
func (server *TcpServer) Start() (err error) {
	for {
		var conn *net.TCPConn
		if conn, err = server.TCPListener.AcceptTCP(); err != nil {
			return err
		}
		if server.keepAlive != nil {
			if err := conn.SetKeepAlive(server.keepAlive.(bool)); err != nil {
				return err
			}
		}
		if server.keepAlivePeriod != nil {
			if err := conn.SetKeepAlivePeriod(server.keepAlivePeriod.(time.Duration)); err != nil {
				return err
			}
		}
		if server.linger != nil {
			if err := conn.SetLinger(server.linger.(int)); err != nil {
				return err
			}
		}
		if server.noDelay != nil {
			if err := conn.SetNoDelay(server.noDelay.(bool)); err != nil {
				return err
			}
		}
		if server.readBuffer != nil {
			if err := conn.SetReadBuffer(server.readBuffer.(int)); err != nil {
				return err
			}
		}
		if server.writerBuffer != nil {
			if err := conn.SetWriteBuffer(server.writerBuffer.(int)); err != nil {
				return err
			}
		}
		if server.deadline != nil {
			if err := conn.SetDeadline(server.deadline.(time.Time)); err != nil {
				return err
			}
		}
		if server.readDeadline != nil {
			if err := conn.SetReadDeadline(server.readDeadline.(time.Time)); err != nil {
				return err
			}
		}
		if server.writerDeadline != nil {
			if err := conn.SetWriteDeadline(server.writerDeadline.(time.Time)); err != nil {
				return err
			}
		}
		if server.config != nil {
			server.ServeTCP(tls.Client(conn, server.config))
		} else {
			server.ServeTCP(conn)
		}
	}
}
示例#6
0
文件: conn.go 项目: netroby/gotunnel
func newTunnel(conn *net.TCPConn) *Tunnel {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second * 10) //we do not keep so long

	var tun Tunnel
	tun.Conn = &Conn{conn, bufio.NewReaderSize(conn, PacketSize), bufio.NewWriterSize(conn, PacketSize), nil, nil}
	Info("new tunnel:%s", tun)
	return &tun
}
示例#7
0
文件: conn.go 项目: catding/gotunnel
func newTunnel(conn *net.TCPConn) *Tunnel {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second * 180)

	var tun Tunnel
	tun.Conn = &Conn{conn, bufio.NewReaderSize(conn, 64*1024), bufio.NewWriterSize(conn, 64*1024), nil, nil}
	Info("new tunnel:%s", tun)
	return &tun
}
示例#8
0
func NewConnectionFromTCPConn(socket *net.TCPConn, cm *ConnectionManager, count uint32) *Connection {
	socket.SetKeepAlive(true)
	socket.SetKeepAlivePeriod(time.Second)
	conn := &Connection{
		socket:            socket,
		connectionManager: cm,
		ConnectionNumber:  count,
	}
	conn.start()
	return conn
}
示例#9
0
func setTCPOptions(conn *net.TCPConn) {
	var err error
	if err = conn.SetLinger(0); err != nil {
		l.Infoln(err)
	}
	if err = conn.SetNoDelay(false); err != nil {
		l.Infoln(err)
	}
	if err = conn.SetKeepAlivePeriod(60 * time.Second); err != nil {
		l.Infoln(err)
	}
	if err = conn.SetKeepAlive(true); err != nil {
		l.Infoln(err)
	}
}
示例#10
0
文件: link.go 项目: catding/gotunnel
func (link *Link) Pump(conn *net.TCPConn) {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second * 60)
	link.conn = conn

	link.wg.Add(1)
	go link.pumpIn()

	link.wg.Add(1)
	go link.pumpOut()

	link.wg.Wait()
	Info("link(%d) closed", link.id)
	link.hub.deleteLink(link.id)
}
示例#11
0
func newTunnel(conn *net.TCPConn) *Tunnel {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second * 60)
	conn.SetLinger(-1)
	// conn.SetWriteBuffer(64 * 1024)
	// conn.SetReadBuffer(64 * 1024)
	desc := fmt.Sprintf("tunnel[%s <-> %s]", conn.LocalAddr(), conn.RemoteAddr())
	return &Tunnel{
		wlock:  new(sync.Mutex),
		writer: NewRC4Writer(conn, options.RC4Key),
		rlock:  new(sync.Mutex),
		reader: NewRC4Reader(bufio.NewReaderSize(conn, 8192), options.RC4Key),
		conn:   conn,
		desc:   desc,
	}
}
示例#12
0
文件: public.go 项目: gwind/syncthing
// SetTCPOptions sets syncthings default TCP options on a TCP connection
func SetTCPOptions(conn *net.TCPConn) error {
	var err error
	if err = conn.SetLinger(0); err != nil {
		return err
	}
	if err = conn.SetNoDelay(false); err != nil {
		return err
	}
	if err = conn.SetKeepAlivePeriod(60 * time.Second); err != nil {
		return err
	}
	if err = conn.SetKeepAlive(true); err != nil {
		return err
	}
	return nil
}
示例#13
0
func (p *Proxy) proxyTCPStream(ctx context.Context, src *net.TCPConn) {
	srcRemoteAddr := src.RemoteAddr().(*net.TCPAddr)
	srcLocalAddr := src.LocalAddr().(*net.TCPAddr)

	route := p.routes.GetTable().Lookup(protocols.TCP,
		srcRemoteAddr.IP, srcLocalAddr.IP,
		uint16(srcRemoteAddr.Port), uint16(srcLocalAddr.Port))
	if route == nil {
		src.Close()
		return
	}

	go func() {
		dstAddr := net.TCPAddr{
			IP:   route.Outbound.DstIP,
			Port: int(route.Outbound.DstPort),
		}

		dst, err := net.DialTCP("tcp", nil, &dstAddr)
		if err != nil {
			src.Close()
			return
		}

		dst.SetKeepAlivePeriod(10 * time.Second)
		src.SetKeepAlivePeriod(10 * time.Second)

		go func() {
			<-ctx.Done()
			src.Close()
			dst.Close()
		}()

		go func() {
			defer dst.CloseWrite()
			defer src.CloseRead()
			io.Copy(dst, src)
		}()

		go func() {
			defer src.CloseWrite()
			defer dst.CloseRead()
			io.Copy(src, dst)
		}()
	}()
}
示例#14
0
// readDiamondMetrics reads from the connection
func (d *Diamond) readDiamondMetrics(conn *net.TCPConn) {
	defer conn.Close()
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second)
	reader := bufio.NewReader(conn)
	d.log.Info("Connection started: ", conn.RemoteAddr())
	for {
		line, err := reader.ReadBytes('\n')
		if err != nil {
			d.log.Warn("Error while reading diamond metrics", err)
			break
		}
		d.log.Debug("Read: ", string(line))
		d.incoming <- line
	}
	d.log.Info("Connection closed: ", conn.RemoteAddr())
}
示例#15
0
// readDiamondMetrics reads from the connection
func (d Diamond) readDiamondMetrics(conn *net.TCPConn) {
	defer conn.Close()
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second)
	reader := bufio.NewReader(conn)
	log.Info("Diamond collector connection started: ", conn.RemoteAddr())
	for {
		// TODO: verify that timeout is actually working.
		conn.SetDeadline(time.Now().Add(1e9))
		line, err := reader.ReadBytes('\n')
		if err != nil {
			break
		}
		log.Debug("Read from Diamond collector: ", string(line))
		d.incoming <- line
	}
	log.Info("Diamond collector connection closed: ", conn.RemoteAddr())
}
示例#16
0
func handleConn(source *net.TCPConn) {
	var destList []*DestList
	source.SetKeepAlive(true)
	source.SetKeepAlivePeriod(time.Second * 60)
	for _, host := range options.hostList.HostList {
		dest, err := net.Dial("tcp", host.Addr)
		if err != nil {
			source.Close()
			log.Printf("connect to %s failed: %s", host.Addr, err.Error())
			return
		}
		tmp := new(DestList)
		tmp.Conn = dest.(*net.TCPConn)
		tmp.Discard = host.Discard
		destList = append(destList, tmp)
	}
	go sendDest(source, destList)
	sendSource(destList, source)
}
示例#17
0
文件: main.go 项目: tzngit/goscon
func handleClient(source *net.TCPConn) {
	atomic.AddInt32(&daemon.status.actives, 1)
	defer func() {
		atomic.AddInt32(&daemon.status.actives, -1)
		daemon.wg.Done()
	}()

	Info("accept new connection: %v", source.RemoteAddr())

	source.SetKeepAlive(true)
	source.SetKeepAlivePeriod(time.Second * 60)
	source.SetLinger(-1)

	// read req
	// set read request timeout
	source.SetReadDeadline(time.Now().Add(time.Second * 30))
	err, req := ReadReq(source)
	if err != nil {
		source.Close()
		Error("conn:%v, read req failed: %v", source.RemoteAddr(), err)
		return
	}

	// cancel read timeout
	var t time.Time
	source.SetReadDeadline(t)

	// judge: new conn or reuse conn
	switch req := req.(type) {
	case *NewConnReq:
		Info("new conn request:%v", req)
		onNewConn(source, req)
	case *ReuseConnReq:
		Info("reuse conn request:%v", req)
		onReuseConn(source, req)
	default:
		Info("unknown request:%v", req)
		source.Close()
		return
	}
	Info("connection close: %v", source.RemoteAddr())
}
示例#18
0
func NewSession(conn *net.TCPConn, rc *turbo.RemotingConfig) *Session {

	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(rc.IdleTime * 2)
	//禁用nagle
	conn.SetNoDelay(true)
	conn.SetReadBuffer(rc.ReadBufferSize)
	conn.SetWriteBuffer(rc.WriteBufferSize)

	session := &Session{
		conn:         conn,
		br:           bufio.NewReaderSize(conn, rc.ReadBufferSize),
		bw:           bufio.NewWriterSize(conn, rc.WriteBufferSize),
		ReadChannel:  make(chan *packet.Packet, rc.ReadChannelSize),
		WriteChannel: make(chan *packet.Packet, rc.WriteChannelSize),
		isClose:      false,
		remoteAddr:   conn.RemoteAddr().String(),
		rc:           rc}
	return session
}
示例#19
0
文件: gopf.go 项目: sunvim/gopf
func handleConn(source *net.TCPConn) {
	host := chooseHost(options.backend.weight, options.backend.Hosts)
	if host == nil {
		source.Close()
		log.Println("choose host failed")
		return
	}

	dest, err := net.Dial("tcp", host.Addr)
	if err != nil {
		source.Close()
		log.Printf("connect to %s failed: %s", host.Addr, err.Error())
		return
	}

	source.SetKeepAlive(true)
	source.SetKeepAlivePeriod(time.Second * 60)

	go forward(source, dest.(*net.TCPConn))
	forward(dest.(*net.TCPConn), source)
}
func (this *DeviceGatewayServer) deviceRoutine(waitGroup *sync.WaitGroup, socket *net.TCPConn, maxLen int) {
	defer waitGroup.Done()
	conn := NewConnection(socket, maxLen, this.devManager)
	defer conn.Close()
	// step 1. shake hands with the dev connection
	deviceGid, err := conn.DeviceHandShake()
	if err != nil {
		if deviceGid != nil {
			log.Errorf("device handshake failed exit:addr[%s], gid[%s]", socket.RemoteAddr(), deviceGid.String())
			return
		}
		log.Errorf("device handshake failed exit:addr[%s]", socket.RemoteAddr())
		return
	}

	// step 2. set the socket option as keep alive
	socket.SetKeepAlive(true)
	socket.SetKeepAlivePeriod(time.Second * 30)

	// step 3. record the connection for forward manager
	err = this.connManager.Insert(deviceGid, conn)
	if err != nil {
		log.Errorf("insert the device connection Failed:addr[%s], gid[%s], err[%v]",
			socket.RemoteAddr(), deviceGid.String(), err)
		return
	}
	// for debug info
	log.Infof("device connection created:addr[%s], gid[%s]", socket.RemoteAddr(), deviceGid.String())

	// step 4. loop forward all request and receive all response
	conn.Loop(waitGroup)

	// step 5. remove conn from device connection manager
	_, find := this.connManager.Delete(deviceGid)
	if !find {
		log.Errorf("delete device connection before close:addr[%s], gid[%s]", socket.RemoteAddr(), deviceGid.String())
	}
	// for debug info
	log.Infof("device connection closed:addr[%s], gid[%s]", socket.RemoteAddr(), deviceGid.String())
}
示例#21
0
func handle_sync_client(conn *net.TCPConn) {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Duration(10 * 60 * time.Second))
	client := NewSyncClient(conn)
	client.Run()
}
示例#22
0
文件: tunnel.go 项目: hycxa/gotunnel
func NewTunnel(conn *net.TCPConn) *Tunnel {
	conn.SetKeepAlive(true)
	conn.SetKeepAlivePeriod(time.Second * 60)
	conn.SetLinger(-1)
	return &Tunnel{make(chan *TunnelPayload, 65535), make(chan *TunnelPayload, 65535), conn}
}
示例#23
0
文件: conn.go 项目: joushou/net9p
func (c *conn) command(s string) error {
	c.Lock()
	defer c.Unlock()
	s = strings.TrimSpace(s)

	args := strings.Split(s, " ")
	cmd := args[0]
	args = args[1:]
	switch cmd {
	case "connect":
		addr := strings.Split(args[0], "!")
		if len(args) == 2 {
			return errors.New("manual local port assignment not supported")
		}
		if len(addr) != 2 {
			return errors.New("invalid address")
		}
		host := addr[0]
		port, err := strconv.ParseUint(addr[1], 10, 64)
		if err != nil {
			return err
		}
		if port > 65535 {
			return fmt.Errorf("invalid port: %s", addr[1])
		}

		// TODO(kl): Should the old connection disconnect?
		c.address = fmt.Sprintf("%s:%d", host, port)
		log.Printf("-> Connect: %s", c.address)
		c.connectPending = true

	case "announce":
		if args[0] == "*" {
			args[0] = "0"
		}

		port, err := strconv.ParseUint(args[0], 10, 64)
		if err != nil {
			return err
		}
		if port > 65535 {
			return fmt.Errorf("invalid port: %s", args[0])
		}

		c.address = fmt.Sprintf(":%d", port)
		log.Printf("-> Announce: %s", c.address)
		c.listener, err = net.Listen(c.network, c.address)
		c.state = stateAnnouncing

	case "accept":
		// Do nothing...
	case "keepalive":
		var tcp *net.TCPConn
		var ok bool

		if tcp, ok = c.conn.(*net.TCPConn); !ok {
			return fmt.Errorf("keepalive only valid on tcp connections")
		}
		var period time.Duration
		switch len(args) {
		case 0:
			period = 30 * time.Second
		case 1:
			d, err := strconv.ParseUint(args[0], 10, 64)
			if err != nil {
				return err
			}
			period = time.Duration(d) * time.Millisecond
		default:
			return fmt.Errorf("invalid arguments")
		}

		log.Printf("-> Keepalive: %v", period)
		tcp.SetKeepAlivePeriod(period)
		tcp.SetKeepAlive(true)

	case "hangup", "reject":
		c.hangup()
	case "bind", "ttl", "tos", "ignoreadvice", "addmulti", "remmulti":
		return fmt.Errorf("Unimplemented command received: %v", s)
	case "checksum", "tcpporthogdefence":
		return fmt.Errorf("Unimplemented command received: %v", s)
	default:
		return fmt.Errorf("Unimplemented command received: %v", s)
	}

	return nil
}