func (p *IdcProtocol) ReadData(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
utils.Debug("received Idccard ReadData request,arg is : %+v", *arg)
f, a, err := getIDCImpl()
if err != nil {
utils.Error("get Idc impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end Idc ReadData request")
return nil
}
defer MarkDeviceIDLE(IDR)
s, err := f.ReadData(a, arg.Timeout)
if err != nil {
utils.Error("invoke Idccard read error:%s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ErrMsg = ""
res.ResMsg = string(s)
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ErrMsg = ""
res.ResMsg = string(s)
utils.Debug("IdcProtocol ReadData success")
}
utils.Debug("end Idccard ReadData request")
return nil
}
//从ic卡获取arqc
func (p *IcProtocol) GenARQC(r *http.Request, arg *JsonICInputAgr, res *JsonResponse) error {
utils.Debug("received iccard GenARQC request,arg is :%+v", *arg)
var out []byte
f, a, err := getICImpl()
if err != nil {
utils.Error("get ic impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end ic GenARQC request")
return nil
}
defer MarkDeviceIDLE(IC)
out, err = f.GenARQC(a, arg.Timeout, []byte(arg.TagList), []byte(arg.LpicAppData))
if err != nil {
utils.Error("invoke iccard GenARQC error:%s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ErrMsg = string(err.Error())
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ResMsg = string(out)
utils.Debug("received GenARQC read")
}
utils.Debug("end iccard GenARQC request")
return nil
}
func (jst *STICCard) CtrScriptData(pin *driverlayer.DriverArg, timeout int, taglist []byte, lpicappdata []byte, arpc []byte) ([]byte, error) {
utils.Debug("receive STICCard CtrScriptData request")
var term_type int = 0
var func_id int = 2
var buf_size int = 4096
var func_arg int = 4
t := make([]byte, 4096)
tty_name := make([]byte, 1)
tty_name[0] = 0
var func_arg_pointer []*byte
func_arg_pointer = make([]*byte, 4)
if taglist == nil || len(taglist) == 0 {
taglist = tty_name
}
if lpicappdata == nil || len(lpicappdata) == 0 {
lpicappdata = tty_name
}
if arpc == nil || len(arpc) == 0 {
arpc = tty_name
}
porttype, port, _ := driverlayer.GetPortDescription(pin.Port)
switch porttype {
case "USB":
func_arg_pointer[0] = &([]byte("U"))[0]
case "COM":
func_arg_pointer[0] = &([]byte("C"))[0]
}
//taglist
func_arg_pointer[2] = &lpicappdata[0]
func_arg_pointer[1] = &taglist[0]
func_arg_pointer[3] = &arpc[0]
r, _, _ := dllinterop.CallProc(jst.read, uintptr(term_type), uintptr(unsafe.Pointer(&tty_name[0])),
uintptr(port), uintptr(timeout), uintptr(func_id),
uintptr(func_arg), uintptr(unsafe.Pointer(&func_arg_pointer[0])), uintptr(unsafe.Pointer(&t[0])), uintptr(buf_size))
if int(r) == 0 {
var empocc int
empocc = utils.IndexByteRune(t, 0, 1)
if empocc != -1 {
t = t[0:empocc]
}
empocc = utils.IndexByteRune(t, '|', 2)
if empocc != -1 {
t = t[empocc+1 : len(t)]
}
utils.Debug("end STICCard GenARQC request ,data [%s]", string(t))
return t, nil
} else {
utils.Error("end STICCard GenARQC request error %s", int(r))
return nil, errors.New(fmt.Sprintf("%d", int(r)))
}
}
//add by yangxiaolong
func (p *Pr2Protocol) PrintEx(r *http.Request, arg *JsonPr2InputAgr, res *JsonResponse) error {
utils.Debug("received pr2 print request,arg is : %+v", *arg)
f, s, err := getPr2Impl()
if err != nil {
utils.Error("get pr2 impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end pr2 print request")
return nil
}
defer MarkDeviceIDLE(PR2PRT)
f.BeginPrintJob(s, 20)
defer f.EndPrinterJob()
//debug by jinsl
//f.Init()
f.SetTop(10)
f.SetLeftMargin(2)
f.OutputString(arg.Con)
f.EjectPaper()
res.ResMsg = "成功"
res.ErrMsg = "0"
utils.Debug("end pr2 print request")
return nil
}
//下电
func (p *IcProtocol) PowerOff(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
utils.Debug("received iccard PowerOff request,arg is :%+v", *arg)
f, a, err := getICImpl()
if err != nil {
utils.Error("get ic impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end ic PowerOff request")
return nil
}
defer MarkDeviceIDLE(IC)
err = f.PowerOff(a, arg.Timeout)
if err != nil {
utils.Error("invoke iccard PowerOff error:%s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ErrMsg = ""
res.ResMsg = string(err.Error())
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ErrMsg = ""
utils.Debug("received PowerOff read")
}
utils.Debug("end iccard PowerOff request")
return nil
}
func (p *PinProtocol) Readonce(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
utils.Debug("received pin readonce request,arg is : %+v", *arg)
f, a, err := getPinImpl()
if err != nil {
utils.Error("get pin impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end pin readonce request")
return nil
}
defer MarkDeviceIDLE(PIN)
s, err := f.Readonce(a, arg.Timeout)
if err != nil {
utils.Error("invoke pin Readonce error: %s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ErrMsg = err.Error()
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ResMsg = string(s)
utils.Debug("pin Readonce request success,reteive data %s", string(s))
}
utils.Debug("end pin readonce request")
return nil
}
//调用winscard.dll实现
func (jst *ICGeneral) ReadCardNo(pin *driverlayer.DriverArg, timeout int) ([]byte, error) {
utils.Debug("receive ICGeneral ReadCardNo request")
cardno := make([]byte, 100)
errmsg := make([]byte, 300)
var len = 100
r, _, _ := dllinterop.CallProc(jst.readcard, uintptr(timeout), uintptr(unsafe.Pointer(&cardno[0])),
uintptr(unsafe.Pointer(&len)), uintptr(unsafe.Pointer(&errmsg[0])))
if int(r) == 0 {
utils.Debug("reteive card no %s", string(cardno[0:len]))
cardno = cardno[0:len]
for i, v := range cardno {
if v == 0x3D {
cardno = cardno[0:i]
break
}
}
utils.Debug("end ICGeneral ReadCardNo request")
return cardno, nil
} else {
utils.Debug("end ICGeneral ReadCardNo request")
return nil, errors.New(string(errmsg))
}
}
func (p *MsfProtocol) Read(r *http.Request, arg *JsonGeneralReadInputAgr, res *JsonResponse) error {
utils.Debug("received MsfProtocol read request,arg is : %+v", *arg)
f, a, err := getMSFImpl()
if err != nil {
utils.Error("get msf impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end MsfProtocol Read request")
return nil
}
defer MarkDeviceIDLE(MSF)
s, err := f.Read(a, arg.Readtype, arg.Timeout)
if err != nil {
utils.Error("invoke msf read error:%s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ResMsg = string(s)
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ResMsg = string(s)
utils.Debug("MsfProtocol read success %s", string(s))
}
utils.Debug("end MsfProtocol read request")
return nil
}
func (p *FinProtocol) MatchFinger(r *http.Request, arg *JsonFingerMatchInputAgr, res *JsonResponse) error {
utils.Debug("received FinProtocol MatchFinger request,arg is : %+v", *arg)
f, a, err := getFingerImpl()
if err != nil {
utils.Error("get fin impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end fin GetValidateFg request")
return nil
}
defer MarkDeviceIDLE(FP)
s := f.MatchFinger(a, arg.Timeout, []byte(arg.Reg), []byte(arg.Vad))
if s >= 0 {
utils.Debug("match finger success")
} else {
utils.Debug("match finger error")
}
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ErrMsg = ""
if s >= 0 {
res.ResMsg = "true"
} else {
res.ResMsg = "false"
}
utils.Debug("end FinProtocol MatchFinger request")
return nil
}
func RunPr2Engine(s string, pr2 driverlayer.IPr2Print, pin *driverlayer.DriverArg) error {
var pc PrintCurState
pf, e := ParserPrintXml(s)
if e != nil {
utils.Error("parse xml file error %s", e.Error())
} else {
utils.Info("parse xml file success")
}
ps := pf.S
pi := pf.V
pc.BottomMargin = ps.ps.Bottommargin
pc.LeftMargin = ps.ps.Leftmargin
pc.PageHeight = ps.ps.Height
pc.PageWidth = ps.ps.Width
pc.TopMargin = ps.ps.Topmargin
pc.RightMargin = ps.ps.Rightmargin
pc.CurX = 0
pc.CurY = 0
pc.CurPage = 1
pc.Flags = 0
pc.LineInterval = ps.ps.LineInterval
pc.ColInterval = ps.ps.ColInterval
RecurCalcExtent(pi, &pc)
utils.Info("RecurCalcExtent success")
fl := GeneratePrintLine(pi)
utils.Debug("begin print printline----------------------------")
PrintPrintLine(fl)
utils.Debug("end print printline----------------------------")
pr2.BeginPrintJob(pin, 20)
defer pr2.EndPrinterJob()
RunRealPrinter(ps, fl, pr2)
return nil
}
func (p *PingjiaProtocol) StartEstimate(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
utils.Debug("received PingjiaProtocol StartEstimate request,arg is : %+v", *arg)
f, a, err := getPingjiaImpl()
if err != nil {
utils.Error("get Pingjia impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end fin StartEstimate request")
return nil
}
defer MarkDeviceIDLE(PINGJIA)
s, err := f.StartEsitimate(a, arg.Timeout)
if err != nil {
utils.Error("invoke StartEstimate read error: %s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ErrMsg = err.Error()
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ResMsg = string(s)
utils.Debug("Pingjia StartEstimate request success,reteive data %s", string(s))
}
utils.Debug("end PingjiaProtocol StartEstimate request")
return nil
}
func (p *FinProtocol) GetValidateFg(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
utils.Debug("received FinProtocol GetValidateFg request,arg is : %+v", *arg)
f, a, err := getFingerImpl()
if err != nil {
utils.Error("get fin impl error: %s", err.Error())
res.Code = driverlayer.DEVICE_IN_USE
res.ErrMsg = err.Error()
utils.Debug("end fin GetValidateFg request")
return nil
}
defer MarkDeviceIDLE(FP)
s, err := f.GetValidateFg(a, arg.Timeout)
if err != nil {
utils.Error("invoke GetValidateFg read error: %s", err.Error())
res.Code = driverlayer.DEVICE_OPER_ERROR
res.ErrMsg = err.Error()
} else {
res.Code = driverlayer.DEVICE_OPER_SUCCESS
res.ResMsg = string(s)
utils.Debug("fin GetValidateFg request success,reteive data %s", string(s))
}
utils.Debug("end FinProtocol GetValidateFg request")
return nil
}
//获取所有运行设备
func (p *DebugProtocol) GetUsableDevice(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
utils.Debug("%s", "received DebugProtocol GetUsableDevice request")
var buf bytes.Buffer
rad.Execute(&buf, getAllDevice())
utils.Debug("get all runnable device: %s", buf.String())
res.ResMsg = buf.String()
utils.Debug("%s", "end DebugProtocol GetUsableDevice request")
return nil
}
func (jst *OkiPrinter) ChanageToIBM() error {
utils.Debug("OlevittePrinter received ChanageToIBM request")
s, _ := hex.DecodeString("1B5E30")
utils.Debug("OlevittePrinter send ChanageToIBM pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//打印机初始化
func (jst *OkiPrinter) Init() error {
utils.Debug("OlevittePrinter received initPrinter request")
s, _ := hex.DecodeString("1042")
utils.Debug("OlevittePrinter send initPrinter pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//进纸一行
func (jst *OkiPrinter) AdvanceOneLine() error {
utils.Debug("OkiPrinter received Initfirstline request")
s, _ := hex.DecodeString("0d0a20")
utils.Debug("OkiPrinter send Initfirstline pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//清除上/下标打印
func (jst *OkiPrinter) CancelSuperSubscript() error {
utils.Debug("OlevittePrinter received CancelSuperSubscript request")
s, _ := hex.DecodeString("1B7B")
utils.Debug("OlevittePrinter send CancelSuperSubscript pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//三倍高
func (jst *OkiPrinter) SetThreeHigh() error {
utils.Debug("OlevittePrinter received SetThreeHigh request")
s, _ := hex.DecodeString("1b7732")
utils.Debug("OlevittePrinter send SetThreeHigh pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
func (jst *STPingjia) CancelEsitimate(pin *driverlayer.DriverArg, timeout int) error {
utils.Debug("STPingjia received CancelEsitimate request")
t, _ := hex.DecodeString("1b5b3443")
utils.Debug("STPingjia send CancelEsitimate pi %x", t)
e := driverlayer.WritePortData(pin.Port, pin.Baud, t)
utils.Debug("STPingjia CancelEsitimate")
return e
}
func (jst *OlevittePrinter) OutputString(s string) error {
utils.Debug("OlevittePrinter received OutputString request")
ds, _ := utils.TransGBKFromUTF8(s)
utils.Debug("OlevittePrinter send OutputString pi %x", ds)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, ds)
} else {
return PR2NOTINJOB
}
}
func (jst *OlevittePrinter) CancelBold() error {
utils.Debug("OlevittePrinter received CancelBold request")
s, _ := hex.DecodeString("1b29")
utils.Debug("OlevittePrinter send CancelBold pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//换行
func (jst *OlevittePrinter) ChangeLine() error {
utils.Debug("OlevittePrinter received ChangeLine request")
s, _ := hex.DecodeString("0A20")
utils.Debug("OlevittePrinter send ChangeLine pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//倍宽
func (jst *OlevittePrinter) DoublePrintWidth() error {
utils.Debug("OlevittePrinter received DoublePrintWidth request")
s, _ := hex.DecodeString("1b33")
utils.Debug("OlevittePrinter send DoublePrintWidth pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
//背景打印。最后一位：0取消；1逆打印；2密网打印；3梳网打印
func (jst *OkiPrinter) BackgroundPrint() error {
utils.Debug("OlevittePrinter received BackgroundPrint request")
s, _ := hex.DecodeString("1C2831")
utils.Debug("OlevittePrinter send BackgroundPrint pi %x", s)
if jst.checkJobInPrint() {
return driverlayer.WriteData(jst.w, s)
} else {
return PR2NOTINJOB
}
}
func (jst *KVMGeneral) InnSyncOuter(pin *driverlayer.DriverArg, timeout int) error {
utils.Debug("KVMGeneral received InnSyncOuter request")
s, _ := hex.DecodeString("fa5a1101000066")
b, e := driverlayer.WritePortAndReadWithLen(pin.Port, pin.Baud, s, 0, timeout, nil)
if e != nil {
return e
} else {
utils.Debug("KVMGeneral InnSyncOuter data %s,begin to process", b)
return nil
}
}
//保存所有设备配置
func (p *ConfigProtocol) SaveAllDevConfig(r *http.Request, arg *JsonConfigInputAgr, res *JsonResponse) error {
utils.Debug("received ConfigProtocol SaveAllDevConfig request")
var (
n dom.Node
t dom.Element
dt dom.Attribute
)
db := dom.NewDOMBuilder(strings.NewReader(arg.Content), dom.NewDOMStore())
d, err2 := db.Build()
if err2 != nil {
res.Code = 1
res.ErrMsg = fmt.Sprintf("parse xml file error,category :[%+v] ", err2.Error())
utils.Error("parse xml file error,category:[%+v]", err2.Error())
return nil
}
f := d.ChildNodes()
for i := 0; i < len(f); i++ {
n = f[i]
switch n.Kind() {
case dom.ElementKind:
t = n.(dom.Element)
switch t.Name() {
case "Device": // 解析设置
var v []dom.Attribute
v = t.Attr()
for j := 0; j < len(v); j++ {
dt = v[j]
if strings.EqualFold(dt.Name(), "Category") {
err := SaveDrvConfig(dt.Value(), t.String())
if err != nil {
res.Code = 1
res.ErrMsg = fmt.Sprintf("save file error,category :%s content is : [%s]", dt.Value(), t.String())
utils.Error("can't save category [%s] ,content is : [%s]", dt.Value(), t.String())
return nil
}
}
}
break
default:
utils.Error("can't recognize element name: %s", t.Name())
}
break
}
}
res.Code = 0
utils.Debug("end ConfigProtocol SaveAllDevConfig request")
return nil
}
func (jst *IDCGeneral) ReadData(pin *driverlayer.DriverArg, timeout int) ([]byte, error) {
utils.Debug("receive general ReadData request")
out, err := jst.genIDC(pin.Port, timeout, 2)
if err != nil {
utils.Debug("end general ReadData request")
return nil, err
} else {
utils.Debug("reteive id card info %s", string(out))
utils.Debug("end general ReadData request")
return out, nil
}
}
func (jst *PinGeneral) Readonce(pin *driverlayer.DriverArg, timeout int) ([]byte, error) {
utils.Debug("PinGeneral received Readonce request")
s, _ := hex.DecodeString("1b49")
t, _ := hex.DecodeString("83")
utils.Debug("PinGeneral send readonce pi %x", s)
b, e := driverlayer.WritePortAndReadWithTerminator(pin.Port, pin.Baud, s, []byte{0x03}, timeout, t)
if e == nil {
utils.Debug("begin process received data %x", b)
b = b[1 : len(b)-1]
utils.Debug("after process received data %x", b)
}
return b, e
}
//保存单一设备配置
func (p *ConfigProtocol) SaveDevConfig(r *http.Request, arg *JsonConfigInputAgr, res *JsonResponse) error {
utils.Debug("received ConfigProtocol SaveDevConfig request")
err := SaveDrvConfig(arg.Dev, arg.Content)
if err != nil {
res.Code = 1
res.ErrMsg = err.Error()
utils.Error("save %s config file content error,detail is %s", arg.Dev, err.Error())
} else {
res.Code = 0
utils.Debug("save config file content success")
}
utils.Debug("end ConfigProtocol SaveDevConfig request")
return nil
}
//保存设备配置
func (p *ConfigProtocol) SaveUpdateUrl(r *http.Request, arg *JsonUpdateInputAgr, res *JsonResponse) error {
utils.Debug("received ConfigProtocol SaveUpdateUrl request")
err := ioutil.WriteFile("config/updateurl.xml", []byte(arg.Content), 0644)
if err != nil {
res.Code = 1
res.ErrMsg = err.Error()
utils.Error("save updateurl file content error,detail is %s", err.Error())
} else {
res.Code = 0
utils.Debug("save updateurl file content success")
}
utils.Debug("end ConfigProtocol SaveUpdateUrl request")
return nil
}
