Пример #1
0
func (p *IdcProtocol) ReadData(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
	utils.Debug("received Idccard ReadData request,arg is : %+v", *arg)

	f, a, err := getIDCImpl()
	if err != nil {
		utils.Error("get Idc impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end Idc ReadData request")
		return nil
	}

	defer MarkDeviceIDLE(IDR)
	s, err := f.ReadData(a, arg.Timeout)
	if err != nil {
		utils.Error("invoke Idccard read error:%s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ErrMsg = ""
		res.ResMsg = string(s)
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ErrMsg = ""
		res.ResMsg = string(s)
		utils.Debug("IdcProtocol ReadData success")
	}
	utils.Debug("end Idccard ReadData request")

	return nil
}
Пример #2
0
//从ic卡获取arqc
func (p *IcProtocol) GenARQC(r *http.Request, arg *JsonICInputAgr, res *JsonResponse) error {
	utils.Debug("received iccard GenARQC request,arg is :%+v", *arg)
	var out []byte
	f, a, err := getICImpl()

	if err != nil {
		utils.Error("get ic impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end ic GenARQC request")
		return nil
	}

	defer MarkDeviceIDLE(IC)
	out, err = f.GenARQC(a, arg.Timeout, []byte(arg.TagList), []byte(arg.LpicAppData))
	if err != nil {
		utils.Error("invoke iccard GenARQC error:%s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ErrMsg = string(err.Error())
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ResMsg = string(out)
		utils.Debug("received GenARQC read")
	}
	utils.Debug("end iccard GenARQC request")

	return nil
}
Пример #3
0
func (jst *STICCard) CtrScriptData(pin *driverlayer.DriverArg, timeout int, taglist []byte, lpicappdata []byte, arpc []byte) ([]byte, error) {
	utils.Debug("receive STICCard CtrScriptData request")

	var term_type int = 0
	var func_id int = 2
	var buf_size int = 4096
	var func_arg int = 4

	t := make([]byte, 4096)
	tty_name := make([]byte, 1)
	tty_name[0] = 0

	var func_arg_pointer []*byte
	func_arg_pointer = make([]*byte, 4)

	if taglist == nil || len(taglist) == 0 {
		taglist = tty_name
	}
	if lpicappdata == nil || len(lpicappdata) == 0 {
		lpicappdata = tty_name
	}
	if arpc == nil || len(arpc) == 0 {
		arpc = tty_name
	}

	porttype, port, _ := driverlayer.GetPortDescription(pin.Port)
	switch porttype {
	case "USB":
		func_arg_pointer[0] = &([]byte("U"))[0]
	case "COM":
		func_arg_pointer[0] = &([]byte("C"))[0]
	}
	//taglist
	func_arg_pointer[2] = &lpicappdata[0]
	func_arg_pointer[1] = &taglist[0]
	func_arg_pointer[3] = &arpc[0]

	r, _, _ := dllinterop.CallProc(jst.read, uintptr(term_type), uintptr(unsafe.Pointer(&tty_name[0])),
		uintptr(port), uintptr(timeout), uintptr(func_id),
		uintptr(func_arg), uintptr(unsafe.Pointer(&func_arg_pointer[0])), uintptr(unsafe.Pointer(&t[0])), uintptr(buf_size))

	if int(r) == 0 {
		var empocc int
		empocc = utils.IndexByteRune(t, 0, 1)
		if empocc != -1 {
			t = t[0:empocc]
		}

		empocc = utils.IndexByteRune(t, '|', 2)
		if empocc != -1 {
			t = t[empocc+1 : len(t)]
		}

		utils.Debug("end STICCard GenARQC request ,data [%s]", string(t))
		return t, nil
	} else {
		utils.Error("end STICCard GenARQC request error %s", int(r))
		return nil, errors.New(fmt.Sprintf("%d", int(r)))
	}
}
Пример #4
0
//add by yangxiaolong
func (p *Pr2Protocol) PrintEx(r *http.Request, arg *JsonPr2InputAgr, res *JsonResponse) error {
	utils.Debug("received pr2 print request,arg is : %+v", *arg)

	f, s, err := getPr2Impl()
	if err != nil {
		utils.Error("get pr2 impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end pr2 print request")
		return nil
	}
	defer MarkDeviceIDLE(PR2PRT)

	f.BeginPrintJob(s, 20)
	defer f.EndPrinterJob()

	//debug by jinsl
	//f.Init()
	f.SetTop(10)
	f.SetLeftMargin(2)
	f.OutputString(arg.Con)
	f.EjectPaper()
	res.ResMsg = "成功"
	res.ErrMsg = "0"

	utils.Debug("end pr2 print request")
	return nil
}
Пример #5
0
//下电
func (p *IcProtocol) PowerOff(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
	utils.Debug("received iccard PowerOff request,arg is :%+v", *arg)

	f, a, err := getICImpl()

	if err != nil {
		utils.Error("get ic impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end ic PowerOff request")
		return nil
	}

	defer MarkDeviceIDLE(IC)
	err = f.PowerOff(a, arg.Timeout)
	if err != nil {
		utils.Error("invoke iccard PowerOff error:%s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ErrMsg = ""
		res.ResMsg = string(err.Error())
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ErrMsg = ""
		utils.Debug("received PowerOff read")
	}
	utils.Debug("end iccard PowerOff request")

	return nil
}
Пример #6
0
func (p *PinProtocol) Readonce(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
	utils.Debug("received pin readonce request,arg is : %+v", *arg)

	f, a, err := getPinImpl()
	if err != nil {
		utils.Error("get pin impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end pin readonce request")
		return nil
	}

	defer MarkDeviceIDLE(PIN)
	s, err := f.Readonce(a, arg.Timeout)

	if err != nil {
		utils.Error("invoke pin Readonce error: %s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ErrMsg = err.Error()
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ResMsg = string(s)
		utils.Debug("pin Readonce request success,reteive data %s", string(s))
	}
	utils.Debug("end pin readonce request")

	return nil
}
Пример #7
0
//调用winscard.dll实现
func (jst *ICGeneral) ReadCardNo(pin *driverlayer.DriverArg, timeout int) ([]byte, error) {
	utils.Debug("receive ICGeneral ReadCardNo request")
	cardno := make([]byte, 100)
	errmsg := make([]byte, 300)
	var len = 100
	r, _, _ := dllinterop.CallProc(jst.readcard, uintptr(timeout), uintptr(unsafe.Pointer(&cardno[0])),
		uintptr(unsafe.Pointer(&len)), uintptr(unsafe.Pointer(&errmsg[0])))
	if int(r) == 0 {
		utils.Debug("reteive card no %s", string(cardno[0:len]))
		cardno = cardno[0:len]
		for i, v := range cardno {
			if v == 0x3D {
				cardno = cardno[0:i]
				break
			}

		}

		utils.Debug("end ICGeneral ReadCardNo request")
		return cardno, nil
	} else {
		utils.Debug("end ICGeneral ReadCardNo request")
		return nil, errors.New(string(errmsg))
	}

}
Пример #8
0
func (p *MsfProtocol) Read(r *http.Request, arg *JsonGeneralReadInputAgr, res *JsonResponse) error {
	utils.Debug("received MsfProtocol read request,arg is : %+v", *arg)
	f, a, err := getMSFImpl()
	if err != nil {
		utils.Error("get msf impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end MsfProtocol Read request")

		return nil
	}
	defer MarkDeviceIDLE(MSF)
	s, err := f.Read(a, arg.Readtype, arg.Timeout)
	if err != nil {
		utils.Error("invoke msf read error:%s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ResMsg = string(s)
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ResMsg = string(s)
		utils.Debug("MsfProtocol read success %s", string(s))
	}
	utils.Debug("end MsfProtocol read request")
	return nil
}
Пример #9
0
func (p *FinProtocol) MatchFinger(r *http.Request, arg *JsonFingerMatchInputAgr, res *JsonResponse) error {
	utils.Debug("received FinProtocol MatchFinger request,arg is : %+v", *arg)
	f, a, err := getFingerImpl()
	if err != nil {
		utils.Error("get fin impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end fin GetValidateFg request")
		return nil
	}

	defer MarkDeviceIDLE(FP)
	s := f.MatchFinger(a, arg.Timeout, []byte(arg.Reg), []byte(arg.Vad))
	if s >= 0 {
		utils.Debug("match finger success")
	} else {
		utils.Debug("match finger error")
	}
	res.Code = driverlayer.DEVICE_OPER_SUCCESS
	res.ErrMsg = ""
	if s >= 0 {
		res.ResMsg = "true"
	} else {
		res.ResMsg = "false"
	}
	utils.Debug("end FinProtocol MatchFinger request")

	return nil
}
Пример #10
0
func RunPr2Engine(s string, pr2 driverlayer.IPr2Print, pin *driverlayer.DriverArg) error {
	var pc PrintCurState
	pf, e := ParserPrintXml(s)
	if e != nil {
		utils.Error("parse xml file error %s", e.Error())
	} else {
		utils.Info("parse xml file success")
	}
	ps := pf.S
	pi := pf.V
	pc.BottomMargin = ps.ps.Bottommargin
	pc.LeftMargin = ps.ps.Leftmargin
	pc.PageHeight = ps.ps.Height
	pc.PageWidth = ps.ps.Width
	pc.TopMargin = ps.ps.Topmargin
	pc.RightMargin = ps.ps.Rightmargin
	pc.CurX = 0
	pc.CurY = 0
	pc.CurPage = 1
	pc.Flags = 0
	pc.LineInterval = ps.ps.LineInterval
	pc.ColInterval = ps.ps.ColInterval

	RecurCalcExtent(pi, &pc)
	utils.Info("RecurCalcExtent success")
	fl := GeneratePrintLine(pi)
	utils.Debug("begin print printline----------------------------")
	PrintPrintLine(fl)
	utils.Debug("end print printline----------------------------")
	pr2.BeginPrintJob(pin, 20)
	defer pr2.EndPrinterJob()
	RunRealPrinter(ps, fl, pr2)
	return nil
}
Пример #11
0
func (p *PingjiaProtocol) StartEstimate(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
	utils.Debug("received PingjiaProtocol StartEstimate request,arg is : %+v", *arg)

	f, a, err := getPingjiaImpl()
	if err != nil {
		utils.Error("get Pingjia impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end fin StartEstimate request")
		return nil
	}

	defer MarkDeviceIDLE(PINGJIA)
	s, err := f.StartEsitimate(a, arg.Timeout)
	if err != nil {
		utils.Error("invoke StartEstimate read error: %s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ErrMsg = err.Error()
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ResMsg = string(s)
		utils.Debug("Pingjia StartEstimate request success,reteive data %s", string(s))

	}
	utils.Debug("end PingjiaProtocol StartEstimate request")
	return nil
}
Пример #12
0
func (p *FinProtocol) GetValidateFg(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
	utils.Debug("received FinProtocol GetValidateFg request,arg is : %+v", *arg)

	f, a, err := getFingerImpl()
	if err != nil {
		utils.Error("get fin impl error: %s", err.Error())
		res.Code = driverlayer.DEVICE_IN_USE
		res.ErrMsg = err.Error()
		utils.Debug("end fin GetValidateFg request")
		return nil
	}

	defer MarkDeviceIDLE(FP)
	s, err := f.GetValidateFg(a, arg.Timeout)
	if err != nil {
		utils.Error("invoke GetValidateFg read error: %s", err.Error())
		res.Code = driverlayer.DEVICE_OPER_ERROR
		res.ErrMsg = err.Error()
	} else {
		res.Code = driverlayer.DEVICE_OPER_SUCCESS
		res.ResMsg = string(s)
		utils.Debug("fin GetValidateFg request success,reteive data %s", string(s))

	}
	utils.Debug("end FinProtocol GetValidateFg request")
	return nil
}
Пример #13
0
//获取所有运行设备
func (p *DebugProtocol) GetUsableDevice(r *http.Request, arg *JsonGeneralInputAgr, res *JsonResponse) error {
	utils.Debug("%s", "received DebugProtocol GetUsableDevice request")
	var buf bytes.Buffer
	rad.Execute(&buf, getAllDevice())
	utils.Debug("get all runnable device: %s", buf.String())
	res.ResMsg = buf.String()
	utils.Debug("%s", "end DebugProtocol GetUsableDevice request")
	return nil
}
Пример #14
0
func (jst *OkiPrinter) ChanageToIBM() error {
	utils.Debug("OlevittePrinter received ChanageToIBM request")
	s, _ := hex.DecodeString("1B5E30")
	utils.Debug("OlevittePrinter send ChanageToIBM pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #15
0
//打印机初始化
func (jst *OkiPrinter) Init() error {
	utils.Debug("OlevittePrinter received initPrinter request")
	s, _ := hex.DecodeString("1042")
	utils.Debug("OlevittePrinter send initPrinter pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #16
0
//进纸一行
func (jst *OkiPrinter) AdvanceOneLine() error {
	utils.Debug("OkiPrinter received Initfirstline request")
	s, _ := hex.DecodeString("0d0a20")
	utils.Debug("OkiPrinter send Initfirstline pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #17
0
//清除上/下标打印
func (jst *OkiPrinter) CancelSuperSubscript() error {
	utils.Debug("OlevittePrinter received CancelSuperSubscript request")
	s, _ := hex.DecodeString("1B7B")
	utils.Debug("OlevittePrinter send CancelSuperSubscript pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #18
0
//三倍高
func (jst *OkiPrinter) SetThreeHigh() error {
	utils.Debug("OlevittePrinter received SetThreeHigh request")
	s, _ := hex.DecodeString("1b7732")
	utils.Debug("OlevittePrinter send SetThreeHigh pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #19
0
func (jst *STPingjia) CancelEsitimate(pin *driverlayer.DriverArg, timeout int) error {
	utils.Debug("STPingjia received CancelEsitimate request")
	t, _ := hex.DecodeString("1b5b3443")
	utils.Debug("STPingjia send CancelEsitimate pi %x", t)

	e := driverlayer.WritePortData(pin.Port, pin.Baud, t)

	utils.Debug("STPingjia CancelEsitimate")
	return e
}
Пример #20
0
func (jst *OlevittePrinter) OutputString(s string) error {
	utils.Debug("OlevittePrinter received OutputString request")
	ds, _ := utils.TransGBKFromUTF8(s)
	utils.Debug("OlevittePrinter send OutputString pi %x", ds)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, ds)
	} else {
		return PR2NOTINJOB
	}
}
Пример #21
0
func (jst *OlevittePrinter) CancelBold() error {
	utils.Debug("OlevittePrinter received CancelBold request")
	s, _ := hex.DecodeString("1b29")
	utils.Debug("OlevittePrinter send CancelBold pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #22
0
//换行
func (jst *OlevittePrinter) ChangeLine() error {
	utils.Debug("OlevittePrinter received ChangeLine request")
	s, _ := hex.DecodeString("0A20")
	utils.Debug("OlevittePrinter send ChangeLine pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #23
0
//倍宽
func (jst *OlevittePrinter) DoublePrintWidth() error {
	utils.Debug("OlevittePrinter received DoublePrintWidth request")
	s, _ := hex.DecodeString("1b33")
	utils.Debug("OlevittePrinter send DoublePrintWidth pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #24
0
//背景打印。最后一位:0取消;1逆打印;2密网打印;3梳网打印
func (jst *OkiPrinter) BackgroundPrint() error {
	utils.Debug("OlevittePrinter received BackgroundPrint request")
	s, _ := hex.DecodeString("1C2831")
	utils.Debug("OlevittePrinter send BackgroundPrint pi %x", s)
	if jst.checkJobInPrint() {
		return driverlayer.WriteData(jst.w, s)
	} else {
		return PR2NOTINJOB
	}
}
Пример #25
0
func (jst *KVMGeneral) InnSyncOuter(pin *driverlayer.DriverArg, timeout int) error {
	utils.Debug("KVMGeneral received InnSyncOuter request")
	s, _ := hex.DecodeString("fa5a1101000066")
	b, e := driverlayer.WritePortAndReadWithLen(pin.Port, pin.Baud, s, 0, timeout, nil)
	if e != nil {
		return e
	} else {
		utils.Debug("KVMGeneral InnSyncOuter data %s,begin to process", b)
		return nil
	}
}
Пример #26
0
//保存所有设备配置
func (p *ConfigProtocol) SaveAllDevConfig(r *http.Request, arg *JsonConfigInputAgr, res *JsonResponse) error {
	utils.Debug("received ConfigProtocol SaveAllDevConfig request")
	var (
		n  dom.Node
		t  dom.Element
		dt dom.Attribute
	)
	db := dom.NewDOMBuilder(strings.NewReader(arg.Content), dom.NewDOMStore())
	d, err2 := db.Build()
	if err2 != nil {
		res.Code = 1
		res.ErrMsg = fmt.Sprintf("parse xml file error,category :[%+v] ", err2.Error())
		utils.Error("parse xml file error,category:[%+v]", err2.Error())
		return nil
	}

	f := d.ChildNodes()

	for i := 0; i < len(f); i++ {
		n = f[i]
		switch n.Kind() {
		case dom.ElementKind:
			t = n.(dom.Element)
			switch t.Name() {
			case "Device": // 解析设置
				var v []dom.Attribute
				v = t.Attr()
				for j := 0; j < len(v); j++ {
					dt = v[j]
					if strings.EqualFold(dt.Name(), "Category") {
						err := SaveDrvConfig(dt.Value(), t.String())

						if err != nil {
							res.Code = 1
							res.ErrMsg = fmt.Sprintf("save file error,category :%s  content is : [%s]", dt.Value(), t.String())
							utils.Error("can't save category [%s] ,content is : [%s]", dt.Value(), t.String())
							return nil
						}
					}
				}
				break

			default:
				utils.Error("can't recognize element name: %s", t.Name())
			}
			break
		}
	}

	res.Code = 0

	utils.Debug("end ConfigProtocol SaveAllDevConfig request")
	return nil
}
Пример #27
0
func (jst *IDCGeneral) ReadData(pin *driverlayer.DriverArg, timeout int) ([]byte, error) {
	utils.Debug("receive general ReadData request")
	out, err := jst.genIDC(pin.Port, timeout, 2)
	if err != nil {
		utils.Debug("end general ReadData request")
		return nil, err
	} else {
		utils.Debug("reteive id card info %s", string(out))
		utils.Debug("end general ReadData request")
		return out, nil
	}
}
Пример #28
0
func (jst *PinGeneral) Readonce(pin *driverlayer.DriverArg, timeout int) ([]byte, error) {
	utils.Debug("PinGeneral received Readonce request")
	s, _ := hex.DecodeString("1b49")
	t, _ := hex.DecodeString("83")
	utils.Debug("PinGeneral send readonce pi %x", s)
	b, e := driverlayer.WritePortAndReadWithTerminator(pin.Port, pin.Baud, s, []byte{0x03}, timeout, t)
	if e == nil {
		utils.Debug("begin process received data %x", b)
		b = b[1 : len(b)-1]
		utils.Debug("after process received data %x", b)
	}
	return b, e
}
Пример #29
0
//保存单一设备配置
func (p *ConfigProtocol) SaveDevConfig(r *http.Request, arg *JsonConfigInputAgr, res *JsonResponse) error {
	utils.Debug("received ConfigProtocol SaveDevConfig request")
	err := SaveDrvConfig(arg.Dev, arg.Content)
	if err != nil {
		res.Code = 1
		res.ErrMsg = err.Error()
		utils.Error("save %s config file content error,detail is %s", arg.Dev, err.Error())
	} else {
		res.Code = 0
		utils.Debug("save config file content success")
	}
	utils.Debug("end ConfigProtocol SaveDevConfig request")
	return nil
}
Пример #30
0
//保存设备配置
func (p *ConfigProtocol) SaveUpdateUrl(r *http.Request, arg *JsonUpdateInputAgr, res *JsonResponse) error {
	utils.Debug("received ConfigProtocol SaveUpdateUrl request")
	err := ioutil.WriteFile("config/updateurl.xml", []byte(arg.Content), 0644)
	if err != nil {
		res.Code = 1
		res.ErrMsg = err.Error()
		utils.Error("save updateurl file content error,detail is %s", err.Error())
	} else {
		res.Code = 0
		utils.Debug("save updateurl file content success")
	}
	utils.Debug("end ConfigProtocol SaveUpdateUrl request")
	return nil
}