func (v *mappingView) drawArch(context *cairo.Context, r image.Rectangle) {
for _, a := range v.arch {
if r.Overlaps(a.BBox()) {
a.Draw(context)
}
}
}
func (v *mappingView) drawConnections(context *cairo.Context, r image.Rectangle) {
for _, c := range v.connections {
box := c.BBox()
if r.Overlaps(box) {
c.Draw(context)
}
}
}
func drawRGBA(dst *image.RGBA, r image.Rectangle, src image.Image, sp image.Point, mask image.Image, mp image.Point, op Op) {
x0, x1, dx := r.Min.X, r.Max.X, 1
y0, y1, dy := r.Min.Y, r.Max.Y, 1
if image.Image(dst) == src && r.Overlaps(r.Add(sp.Sub(r.Min))) {
if sp.Y < r.Min.Y || sp.Y == r.Min.Y && sp.X < r.Min.X {
x0, x1, dx = x1-1, x0-1, -1
y0, y1, dy = y1-1, y0-1, -1
}
}
sy := sp.Y + y0 - r.Min.Y
my := mp.Y + y0 - r.Min.Y
sx0 := sp.X + x0 - r.Min.X
mx0 := mp.X + x0 - r.Min.X
sx1 := sx0 + (x1 - x0)
i0 := dst.PixOffset(x0, y0)
di := dx * 4
for y := y0; y != y1; y, sy, my = y+dy, sy+dy, my+dy {
for i, sx, mx := i0, sx0, mx0; sx != sx1; i, sx, mx = i+di, sx+dx, mx+dx {
ma := uint32(m)
if mask != nil {
_, _, _, ma = mask.At(mx, my).RGBA()
}
sr, sg, sb, sa := src.At(sx, sy).RGBA()
if op == Over {
dr := uint32(dst.Pix[i+0])
dg := uint32(dst.Pix[i+1])
db := uint32(dst.Pix[i+2])
da := uint32(dst.Pix[i+3])
// dr, dg, db and da are all 8-bit color at the moment, ranging in [0,255].
// We work in 16-bit color, and so would normally do:
// dr |= dr << 8
// and similarly for dg, db and da, but instead we multiply a
// (which is a 16-bit color, ranging in [0,65535]) by 0x101.
// This yields the same result, but is fewer arithmetic operations.
a := (m - (sa * ma / m)) * 0x101
dst.Pix[i+0] = uint8((dr*a + sr*ma) / m >> 8)
dst.Pix[i+1] = uint8((dg*a + sg*ma) / m >> 8)
dst.Pix[i+2] = uint8((db*a + sb*ma) / m >> 8)
dst.Pix[i+3] = uint8((da*a + sa*ma) / m >> 8)
} else {
dst.Pix[i+0] = uint8(sr * ma / m >> 8)
dst.Pix[i+1] = uint8(sg * ma / m >> 8)
dst.Pix[i+2] = uint8(sb * ma / m >> 8)
dst.Pix[i+3] = uint8(sa * ma / m >> 8)
}
}
i0 += dy * dst.Stride
}
}
func drawRGBA(dst *image.RGBA, r image.Rectangle, src image.Image, sp image.Point, mask image.Image, mp image.Point, op Op) {
x0, x1, dx := r.Min.X, r.Max.X, 1
y0, y1, dy := r.Min.Y, r.Max.Y, 1
if image.Image(dst) == src && r.Overlaps(r.Add(sp.Sub(r.Min))) {
if sp.Y < r.Min.Y || sp.Y == r.Min.Y && sp.X < r.Min.X {
x0, x1, dx = x1-1, x0-1, -1
y0, y1, dy = y1-1, y0-1, -1
}
}
sy := sp.Y + y0 - r.Min.Y
my := mp.Y + y0 - r.Min.Y
sx0 := sp.X + x0 - r.Min.X
mx0 := mp.X + x0 - r.Min.X
i0 := (y0 - dst.Rect.Min.Y) * dst.Stride
for y := y0; y != y1; y, sy, my = y+dy, sy+dy, my+dy {
dpix := dst.Pix[i0:]
for x, sx, mx := x0, sx0, mx0; x != x1; x, sx, mx = x+dx, sx+dx, mx+dx {
ma := uint32(m)
if mask != nil {
_, _, _, ma = mask.At(mx, my).RGBA()
}
sr, sg, sb, sa := src.At(sx, sy).RGBA()
var dr, dg, db, da uint32
if op == Over {
rgba := dpix[x-dst.Rect.Min.X]
dr = uint32(rgba.R)
dg = uint32(rgba.G)
db = uint32(rgba.B)
da = uint32(rgba.A)
// dr, dg, db and da are all 8-bit color at the moment, ranging in [0,255].
// We work in 16-bit color, and so would normally do:
// dr |= dr << 8
// and similarly for dg, db and da, but instead we multiply a
// (which is a 16-bit color, ranging in [0,65535]) by 0x101.
// This yields the same result, but is fewer arithmetic operations.
a := (m - (sa * ma / m)) * 0x101
dr = (dr*a + sr*ma) / m
dg = (dg*a + sg*ma) / m
db = (db*a + sb*ma) / m
da = (da*a + sa*ma) / m
} else {
dr = sr * ma / m
dg = sg * ma / m
db = sb * ma / m
da = sa * ma / m
}
dpix[x-dst.Rect.Min.X] = image.RGBAColor{uint8(dr >> 8), uint8(dg >> 8), uint8(db >> 8), uint8(da >> 8)}
}
i0 += dy * dst.Stride
}
}
func processBackward(dst Image, r image.Rectangle, src image.Image, sp image.Point) bool {
return image.Image(dst) == src &&
r.Overlaps(r.Add(sp.Sub(r.Min))) &&
(sp.Y < r.Min.Y || (sp.Y == r.Min.Y && sp.X < r.Min.X))
}
// DrawMask aligns r.Min in dst with sp in src and mp in mask and then replaces the rectangle r
// in dst with the result of a Porter-Duff composition. A nil mask is treated as opaque.
func DrawMask(dst Image, r image.Rectangle, src image.Image, sp image.Point, mask image.Image, mp image.Point, op Op) {
clip(dst, &r, src, &sp, mask, &mp)
if r.Empty() {
return
}
// Fast paths for special cases. If none of them apply, then we fall back to a general but slow implementation.
if dst0, ok := dst.(*image.RGBA); ok {
if op == Over {
if mask == nil {
switch src0 := src.(type) {
case *image.ColorImage:
drawFillOver(dst0, r, src0)
return
case *image.RGBA:
drawCopyOver(dst0, r, src0, sp)
return
case *image.NRGBA:
drawNRGBAOver(dst0, r, src0, sp)
return
case *ycbcr.YCbCr:
drawYCbCr(dst0, r, src0, sp)
return
}
} else if mask0, ok := mask.(*image.Alpha); ok {
switch src0 := src.(type) {
case *image.ColorImage:
drawGlyphOver(dst0, r, src0, mask0, mp)
return
}
}
} else {
if mask == nil {
switch src0 := src.(type) {
case *image.ColorImage:
drawFillSrc(dst0, r, src0)
return
case *image.RGBA:
drawCopySrc(dst0, r, src0, sp)
return
case *image.NRGBA:
drawNRGBASrc(dst0, r, src0, sp)
return
case *ycbcr.YCbCr:
drawYCbCr(dst0, r, src0, sp)
return
}
}
}
drawRGBA(dst0, r, src, sp, mask, mp, op)
return
}
x0, x1, dx := r.Min.X, r.Max.X, 1
y0, y1, dy := r.Min.Y, r.Max.Y, 1
if image.Image(dst) == src && r.Overlaps(r.Add(sp.Sub(r.Min))) {
// Rectangles overlap: process backward?
if sp.Y < r.Min.Y || sp.Y == r.Min.Y && sp.X < r.Min.X {
x0, x1, dx = x1-1, x0-1, -1
y0, y1, dy = y1-1, y0-1, -1
}
}
var out *image.RGBA64Color
sy := sp.Y + y0 - r.Min.Y
my := mp.Y + y0 - r.Min.Y
for y := y0; y != y1; y, sy, my = y+dy, sy+dy, my+dy {
sx := sp.X + x0 - r.Min.X
mx := mp.X + x0 - r.Min.X
for x := x0; x != x1; x, sx, mx = x+dx, sx+dx, mx+dx {
ma := uint32(m)
if mask != nil {
_, _, _, ma = mask.At(mx, my).RGBA()
}
switch {
case ma == 0:
if op == Over {
// No-op.
} else {
dst.Set(x, y, zeroColor)
}
case ma == m && op == Src:
dst.Set(x, y, src.At(sx, sy))
default:
sr, sg, sb, sa := src.At(sx, sy).RGBA()
if out == nil {
out = new(image.RGBA64Color)
}
if op == Over {
dr, dg, db, da := dst.At(x, y).RGBA()
a := m - (sa * ma / m)
out.R = uint16((dr*a + sr*ma) / m)
out.G = uint16((dg*a + sg*ma) / m)
out.B = uint16((db*a + sb*ma) / m)
out.A = uint16((da*a + sa*ma) / m)
} else {
out.R = uint16(sr * ma / m)
out.G = uint16(sg * ma / m)
out.B = uint16(sb * ma / m)
out.A = uint16(sa * ma / m)
}
dst.Set(x, y, out)
}
}
}
}