Ejemplo n.º 1
0
func p2pkhOutputs(amounts ...btcutil.Amount) []*wire.TxOut {
	v := make([]*wire.TxOut, 0, len(amounts))
	for _, a := range amounts {
		outScript := make([]byte, txsizes.P2PKHOutputSize)
		v = append(v, wire.NewTxOut(int64(a), outScript))
	}
	return v
}
Ejemplo n.º 2
0
// NewUnsignedTransaction creates an unsigned transaction paying to one or more
// non-change outputs.  An appropriate transaction fee is included based on the
// transaction size.
//
// Transaction inputs are chosen from repeated calls to fetchInputs with
// increasing targets amounts.
//
// If any remaining output value can be returned to the wallet via a change
// output without violating mempool dust rules, a P2PKH change output is
// appended to the transaction outputs.  Since the change output may not be
// necessary, fetchChange is called zero or one times to generate this script.
// This function must return a P2PKH script or smaller, otherwise fee estimation
// will be incorrect.
//
// If successful, the transaction, total input value spent, and all previous
// output scripts are returned.  If the input source was unable to provide
// enough input value to pay for every output any any necessary fees, an
// InputSourceError is returned.
//
// BUGS: Fee estimation may be off when redeeming non-compressed P2PKH outputs.
// TODO(roasbeef): fix fee estimation for witness outputs
func NewUnsignedTransaction(outputs []*wire.TxOut, relayFeePerKb btcutil.Amount,
	fetchInputs InputSource, fetchChange ChangeSource) (*AuthoredTx, error) {

	targetAmount := h.SumOutputValues(outputs)
	estimatedSize := txsizes.EstimateSerializeSize(1, outputs, true)
	targetFee := txrules.FeeForSerializeSize(relayFeePerKb, estimatedSize)

	for {
		inputAmount, inputs, inputValues, scripts, err := fetchInputs(targetAmount + targetFee)
		if err != nil {
			return nil, err
		}
		if inputAmount < targetAmount+targetFee {
			return nil, insufficientFundsError{}
		}

		maxSignedSize := txsizes.EstimateSerializeSize(len(inputs), outputs, true)
		maxRequiredFee := txrules.FeeForSerializeSize(relayFeePerKb, maxSignedSize)
		remainingAmount := inputAmount - targetAmount
		if remainingAmount < maxRequiredFee {
			targetFee = maxRequiredFee
			continue
		}

		unsignedTransaction := &wire.MsgTx{
			Version:  wire.TxVersion,
			TxIn:     inputs,
			TxOut:    outputs,
			LockTime: 0,
		}
		changeIndex := -1
		changeAmount := inputAmount - targetAmount - maxRequiredFee
		if changeAmount != 0 && !txrules.IsDustAmount(changeAmount,
			txsizes.P2PKHPkScriptSize, relayFeePerKb) {
			changeScript, err := fetchChange()
			if err != nil {
				return nil, err
			}
			if len(changeScript) > txsizes.P2PKHPkScriptSize {
				return nil, errors.New("fee estimation requires change " +
					"scripts no larger than P2PKH output scripts")
			}
			change := wire.NewTxOut(int64(changeAmount), changeScript)
			l := len(outputs)
			unsignedTransaction.TxOut = append(outputs[:l:l], change)
			changeIndex = l
		}

		return &AuthoredTx{
			Tx:              unsignedTransaction,
			PrevScripts:     scripts,
			PrevInputValues: inputValues,
			TotalInput:      inputAmount,
			ChangeIndex:     changeIndex,
		}, nil
	}
}
Ejemplo n.º 3
0
func TestStoreTransactionsWithChangeOutput(t *testing.T) {
	tearDown, pool, store := TstCreatePoolAndTxStore(t)
	defer tearDown()

	wtx := createWithdrawalTxWithStoreCredits(t, store, pool, []int64{5e6}, []int64{1e6, 1e6})
	wtx.changeOutput = wire.NewTxOut(int64(3e6), []byte{})
	msgtx := wtx.toMsgTx()
	tx := &changeAwareTx{MsgTx: msgtx, changeIdx: int32(len(msgtx.TxOut) - 1)}

	if err := storeTransactions(store, []*changeAwareTx{tx}); err != nil {
		t.Fatal(err)
	}

	sha := msgtx.TxSha()
	txDetails, err := store.TxDetails(&sha)
	if err != nil {
		t.Fatal(err)
	}
	if txDetails == nil {
		t.Fatal("The new tx doesn't seem to have been stored")
	}

	storedTx := txDetails.TxRecord.MsgTx
	outputTotal := int64(0)
	for i, txOut := range storedTx.TxOut {
		if int32(i) != tx.changeIdx {
			outputTotal += txOut.Value
		}
	}
	if outputTotal != int64(2e6) {
		t.Fatalf("Unexpected output amount; got %v, want %v", outputTotal, int64(2e6))
	}

	inputTotal := btcutil.Amount(0)
	for _, debit := range txDetails.Debits {
		inputTotal += debit.Amount
	}
	if inputTotal != btcutil.Amount(5e6) {
		t.Fatalf("Unexpected input amount; got %v, want %v", inputTotal, btcutil.Amount(5e6))
	}

	credits, err := store.UnspentOutputs()
	if err != nil {
		t.Fatal(err)
	}
	if len(credits) != 1 {
		t.Fatalf("Unexpected number of credits in txstore; got %d, want 1", len(credits))
	}
	changeOutpoint := wire.OutPoint{Hash: sha, Index: uint32(tx.changeIdx)}
	if credits[0].OutPoint != changeOutpoint {
		t.Fatalf("Credit's outpoint (%v) doesn't match the one from change output (%v)",
			credits[0].OutPoint, changeOutpoint)
	}
}
Ejemplo n.º 4
0
func TestWithdrawalTxOutputTotal(t *testing.T) {
	tearDown, pool, _ := TstCreatePoolAndTxStore(t)
	defer tearDown()

	tx := createWithdrawalTx(t, pool, []int64{}, []int64{4})
	tx.changeOutput = wire.NewTxOut(int64(1), []byte{})

	if tx.outputTotal() != btcutil.Amount(4) {
		t.Fatalf("Wrong total output; got %v, want %v", tx.outputTotal(), btcutil.Amount(4))
	}
}
Ejemplo n.º 5
0
// addChange adds a change output if there are any satoshis left after paying
// all the outputs and network fees. It returns true if a change output was
// added.
//
// This method must be called only once, and no extra inputs/outputs should be
// added after it's called. Also, callsites must make sure adding a change
// output won't cause the tx to exceed the size limit.
func (tx *withdrawalTx) addChange(pkScript []byte) bool {
	tx.fee = tx.calculateFee()
	change := tx.inputTotal() - tx.outputTotal() - tx.fee
	log.Debugf("addChange: input total %v, output total %v, fee %v", tx.inputTotal(),
		tx.outputTotal(), tx.fee)
	if change > 0 {
		tx.changeOutput = wire.NewTxOut(int64(change), pkScript)
		log.Debugf("Added change output with amount %v", change)
	}
	return tx.hasChange()
}
Ejemplo n.º 6
0
func TestWithdrawalTxToMsgTxWithInputButNoOutputsWithChange(t *testing.T) {
	tearDown, pool, _ := TstCreatePoolAndTxStore(t)
	defer tearDown()

	tx := createWithdrawalTx(t, pool, []int64{1}, []int64{})
	tx.changeOutput = wire.NewTxOut(int64(1), []byte{})

	msgtx := tx.toMsgTx()

	compareMsgTxAndWithdrawalTxOutputs(t, msgtx, tx)
	compareMsgTxAndWithdrawalTxInputs(t, msgtx, tx)
}
Ejemplo n.º 7
0
// createSpendTx generates a basic spending transaction given the passed
// signature, witness and public key scripts.
func createSpendingTx(witness [][]byte, sigScript, pkScript []byte,
	outputValue int64) *wire.MsgTx {

	coinbaseTx := wire.NewMsgTx(wire.TxVersion)

	outPoint := wire.NewOutPoint(&chainhash.Hash{}, ^uint32(0))
	txIn := wire.NewTxIn(outPoint, []byte{OP_0, OP_0}, nil)
	txOut := wire.NewTxOut(outputValue, pkScript)
	coinbaseTx.AddTxIn(txIn)
	coinbaseTx.AddTxOut(txOut)

	spendingTx := wire.NewMsgTx(wire.TxVersion)
	coinbaseTxSha := coinbaseTx.TxHash()
	outPoint = wire.NewOutPoint(&coinbaseTxSha, 0)
	txIn = wire.NewTxIn(outPoint, sigScript, witness)
	txOut = wire.NewTxOut(outputValue, nil)

	spendingTx.AddTxIn(txIn)
	spendingTx.AddTxOut(txOut)

	return spendingTx
}
Ejemplo n.º 8
0
// toMsgTx generates a btcwire.MsgTx with this tx's inputs and outputs.
func (tx *withdrawalTx) toMsgTx() *wire.MsgTx {
	msgtx := wire.NewMsgTx()
	for _, o := range tx.outputs {
		msgtx.AddTxOut(wire.NewTxOut(int64(o.amount), o.pkScript()))
	}

	if tx.hasChange() {
		msgtx.AddTxOut(tx.changeOutput)
	}

	for _, i := range tx.inputs {
		msgtx.AddTxIn(wire.NewTxIn(&i.OutPoint, []byte{}))
	}
	return msgtx
}
Ejemplo n.º 9
0
// addrPairsToOutputs converts a map describing a set of outputs to be created,
// the outputs themselves. The passed map pairs up an address, to a desired
// output value amount. Each address is converted to its corresponding pkScript
// to be used within the constructed output(s).
func addrPairsToOutputs(addrPairs map[string]int64) ([]*wire.TxOut, error) {
	outputs := make([]*wire.TxOut, 0, len(addrPairs))
	for addr, amt := range addrPairs {
		addr, err := btcutil.DecodeAddress(addr, activeNetParams.Params)
		if err != nil {
			return nil, err
		}

		pkscript, err := txscript.PayToAddrScript(addr)
		if err != nil {
			return nil, err
		}

		outputs = append(outputs, wire.NewTxOut(amt, pkscript))
	}

	return outputs, nil
}
Ejemplo n.º 10
0
func createMsgTx(pkScript []byte, amts []int64) *wire.MsgTx {
	msgtx := &wire.MsgTx{
		Version: 1,
		TxIn: []*wire.TxIn{
			{
				PreviousOutPoint: wire.OutPoint{
					Hash:  wire.ShaHash{},
					Index: 0xffffffff,
				},
				SignatureScript: []byte{txscript.OP_NOP},
				Sequence:        0xffffffff,
			},
		},
		LockTime: 0,
	}

	for _, amt := range amts {
		msgtx.AddTxOut(wire.NewTxOut(amt, pkScript))
	}
	return msgtx
}
Ejemplo n.º 11
0
// GenFundingPkScript creates a redeem script, and its matching p2wsh
// output for the funding transaction.
func GenFundingPkScript(aPub, bPub []byte, amt int64) ([]byte, *wire.TxOut, error) {
	// As a sanity check, ensure that the passed amount is above zero.
	if amt <= 0 {
		return nil, nil, fmt.Errorf("can't create FundTx script with " +
			"zero, or negative coins")
	}

	// First, create the 2-of-2 multi-sig script itself.
	witnessScript, err := genMultiSigScript(aPub, bPub)
	if err != nil {
		return nil, nil, err
	}

	// With the 2-of-2 script in had, generate a p2wsh script which pays
	// to the funding script.
	pkScript, err := witnessScriptHash(witnessScript)
	if err != nil {
		return nil, nil, err
	}

	return witnessScript, wire.NewTxOut(amt, pkScript), nil
}
Ejemplo n.º 12
0
func testMemWalletLockedOutputs(r *Harness, t *testing.T) {
	// Obtain the initial balance of the wallet at this point.
	startingBalance := r.ConfirmedBalance()

	// First, create a signed transaction spending some outputs.
	addr, err := r.NewAddress()
	if err != nil {
		t.Fatalf("unable to generate new address: %v", err)
	}
	pkScript, err := txscript.PayToAddrScript(addr)
	if err != nil {
		t.Fatalf("unable to create script: %v", err)
	}
	outputAmt := btcutil.Amount(50 * btcutil.SatoshiPerBitcoin)
	output := wire.NewTxOut(int64(outputAmt), pkScript)
	tx, err := r.CreateTransaction([]*wire.TxOut{output}, 10)
	if err != nil {
		t.Fatalf("unable to create transaction: %v", err)
	}

	// The current wallet balance should now be at least 50 BTC less
	// (accounting for fees) than the period balance
	currentBalance := r.ConfirmedBalance()
	if !(currentBalance <= startingBalance-outputAmt) {
		t.Fatalf("spent outputs not locked: previous balance %v, "+
			"current balance %v", startingBalance, currentBalance)
	}

	// Now unlocked all the spent inputs within the unbroadcast signed
	// transaction. The current balance should now be exactly that of the
	// starting balance.
	r.UnlockOutputs(tx.TxIn)
	currentBalance = r.ConfirmedBalance()
	if currentBalance != startingBalance {
		t.Fatalf("current and starting balance should now match: "+
			"expected %v, got %v", startingBalance, currentBalance)
	}
}
Ejemplo n.º 13
0
func testSendOutputs(r *Harness, t *testing.T) {
	genSpend := func(amt btcutil.Amount) *chainhash.Hash {
		// Grab a fresh address from the wallet.
		addr, err := r.NewAddress()
		if err != nil {
			t.Fatalf("unable to get new address: %v", err)
		}

		// Next, send amt BTC to this address, spending from one of our mature
		// coinbase outputs.
		addrScript, err := txscript.PayToAddrScript(addr)
		if err != nil {
			t.Fatalf("unable to generate pkscript to addr: %v", err)
		}
		output := wire.NewTxOut(int64(amt), addrScript)
		txid, err := r.SendOutputs([]*wire.TxOut{output}, 10)
		if err != nil {
			t.Fatalf("coinbase spend failed: %v", err)
		}
		return txid
	}

	assertTxMined := func(txid *chainhash.Hash, blockHash *chainhash.Hash) {
		block, err := r.Node.GetBlock(blockHash)
		if err != nil {
			t.Fatalf("unable to get block: %v", err)
		}

		numBlockTxns := len(block.Transactions)
		if numBlockTxns < 2 {
			t.Fatalf("crafted transaction wasn't mined, block should have "+
				"at least %v transactions instead has %v", 2, numBlockTxns)
		}

		minedTx := block.Transactions[1]
		txHash := minedTx.TxHash()
		if txHash != *txid {
			t.Fatalf("txid's don't match, %v vs %v", txHash, txid)
		}
	}

	// First, generate a small spend which will require only a single
	// input.
	txid := genSpend(btcutil.Amount(5 * btcutil.SatoshiPerBitcoin))

	// Generate a single block, the transaction the wallet created should
	// be found in this block.
	blockHashes, err := r.Node.Generate(1)
	if err != nil {
		t.Fatalf("unable to generate single block: %v", err)
	}
	assertTxMined(txid, blockHashes[0])

	// Next, generate a spend much greater than the block reward. This
	// transaction should also have been mined properly.
	txid = genSpend(btcutil.Amount(500 * btcutil.SatoshiPerBitcoin))
	blockHashes, err = r.Node.Generate(1)
	if err != nil {
		t.Fatalf("unable to generate single block: %v", err)
	}
	assertTxMined(txid, blockHashes[0])
}
Ejemplo n.º 14
0
// This example demonstrates manually creating and signing a redeem transaction.
func ExampleSignTxOutput() {
	// Ordinarily the private key would come from whatever storage mechanism
	// is being used, but for this example just hard code it.
	privKeyBytes, err := hex.DecodeString("22a47fa09a223f2aa079edf85a7c2" +
		"d4f8720ee63e502ee2869afab7de234b80c")
	if err != nil {
		fmt.Println(err)
		return
	}
	privKey, pubKey := btcec.PrivKeyFromBytes(btcec.S256(), privKeyBytes)
	pubKeyHash := btcutil.Hash160(pubKey.SerializeCompressed())
	addr, err := btcutil.NewAddressPubKeyHash(pubKeyHash,
		&chaincfg.MainNetParams)
	if err != nil {
		fmt.Println(err)
		return
	}

	// For this example, create a fake transaction that represents what
	// would ordinarily be the real transaction that is being spent.  It
	// contains a single output that pays to address in the amount of 1 BTC.
	originTx := wire.NewMsgTx(wire.TxVersion)
	prevOut := wire.NewOutPoint(&chainhash.Hash{}, ^uint32(0))
	txIn := wire.NewTxIn(prevOut, []byte{txscript.OP_0, txscript.OP_0}, nil)
	originTx.AddTxIn(txIn)
	pkScript, err := txscript.PayToAddrScript(addr)
	if err != nil {
		fmt.Println(err)
		return
	}
	txOut := wire.NewTxOut(100000000, pkScript)
	originTx.AddTxOut(txOut)
	originTxHash := originTx.TxHash()

	// Create the transaction to redeem the fake transaction.
	redeemTx := wire.NewMsgTx(wire.TxVersion)

	// Add the input(s) the redeeming transaction will spend.  There is no
	// signature script at this point since it hasn't been created or signed
	// yet, hence nil is provided for it.
	prevOut = wire.NewOutPoint(&originTxHash, 0)
	txIn = wire.NewTxIn(prevOut, nil, nil)
	redeemTx.AddTxIn(txIn)

	// Ordinarily this would contain that actual destination of the funds,
	// but for this example don't bother.
	txOut = wire.NewTxOut(0, nil)
	redeemTx.AddTxOut(txOut)

	// Sign the redeeming transaction.
	lookupKey := func(a btcutil.Address) (*btcec.PrivateKey, bool, error) {
		// Ordinarily this function would involve looking up the private
		// key for the provided address, but since the only thing being
		// signed in this example uses the address associated with the
		// private key from above, simply return it with the compressed
		// flag set since the address is using the associated compressed
		// public key.
		//
		// NOTE: If you want to prove the code is actually signing the
		// transaction properly, uncomment the following line which
		// intentionally returns an invalid key to sign with, which in
		// turn will result in a failure during the script execution
		// when verifying the signature.
		//
		// privKey.D.SetInt64(12345)
		//
		return privKey, true, nil
	}
	// Notice that the script database parameter is nil here since it isn't
	// used.  It must be specified when pay-to-script-hash transactions are
	// being signed.
	sigScript, err := txscript.SignTxOutput(&chaincfg.MainNetParams,
		redeemTx, 0, originTx.TxOut[0].PkScript, txscript.SigHashAll,
		txscript.KeyClosure(lookupKey), nil, nil)
	if err != nil {
		fmt.Println(err)
		return
	}
	redeemTx.TxIn[0].SignatureScript = sigScript

	// Prove that the transaction has been validly signed by executing the
	// script pair.
	flags := txscript.ScriptBip16 | txscript.ScriptVerifyDERSignatures |
		txscript.ScriptStrictMultiSig |
		txscript.ScriptDiscourageUpgradableNops
	vm, err := txscript.NewEngine(originTx.TxOut[0].PkScript, redeemTx, 0,
		flags, nil, nil, -1)
	if err != nil {
		fmt.Println(err)
		return
	}
	if err := vm.Execute(); err != nil {
		fmt.Println(err)
		return
	}
	fmt.Println("Transaction successfully signed")

	// Output:
	// Transaction successfully signed
}
Ejemplo n.º 15
0
		0xeb, 0xa4, 0x02, 0xcb, 0x68, 0xe0, 0x69, 0x56, 0xbf, 0x32,
		0x53, 0x90, 0x0e, 0x0a, 0x88, 0xac}
	uncompressedAddrStr = "1L6fd93zGmtzkK6CsZFVVoCwzZV3MUtJ4F"
	compressedAddrStr   = "14apLppt9zTq6cNw8SDfiJhk9PhkZrQtYZ"
)

// Pretend output amounts.
const coinbaseVal = 2500000000
const fee = 5000000

var sigScriptTests = []tstSigScript{
	{
		name: "one input uncompressed",
		inputs: []tstInput{
			{
				txout:              wire.NewTxOut(coinbaseVal, uncompressedPkScript),
				sigscriptGenerates: true,
				inputValidates:     true,
				indexOutOfRange:    false,
			},
		},
		hashType:           SigHashAll,
		compress:           false,
		scriptAtWrongIndex: false,
	},
	{
		name: "two inputs uncompressed",
		inputs: []tstInput{
			{
				txout:              wire.NewTxOut(coinbaseVal, uncompressedPkScript),
				sigscriptGenerates: true,
Ejemplo n.º 16
0
// Test the sigscript generation for valid and invalid inputs, all
// hashTypes, and with and without compression.  This test creates
// sigscripts to spend fake coinbase inputs, as sigscripts cannot be
// created for the MsgTxs in txTests, since they come from the blockchain
// and we don't have the private keys.
func TestSignatureScript(t *testing.T) {
	t.Parallel()

	privKey, _ := btcec.PrivKeyFromBytes(btcec.S256(), privKeyD)

nexttest:
	for i := range sigScriptTests {
		tx := wire.NewMsgTx(wire.TxVersion)

		output := wire.NewTxOut(500, []byte{OP_RETURN})
		tx.AddTxOut(output)

		for range sigScriptTests[i].inputs {
			txin := wire.NewTxIn(coinbaseOutPoint, nil, nil)
			tx.AddTxIn(txin)
		}

		var script []byte
		var err error
		for j := range tx.TxIn {
			var idx int
			if sigScriptTests[i].inputs[j].indexOutOfRange {
				t.Errorf("at test %v", sigScriptTests[i].name)
				idx = len(sigScriptTests[i].inputs)
			} else {
				idx = j
			}
			script, err = SignatureScript(tx, idx,
				sigScriptTests[i].inputs[j].txout.PkScript,
				sigScriptTests[i].hashType, privKey,
				sigScriptTests[i].compress)

			if (err == nil) != sigScriptTests[i].inputs[j].sigscriptGenerates {
				if err == nil {
					t.Errorf("passed test '%v' incorrectly",
						sigScriptTests[i].name)
				} else {
					t.Errorf("failed test '%v': %v",
						sigScriptTests[i].name, err)
				}
				continue nexttest
			}
			if !sigScriptTests[i].inputs[j].sigscriptGenerates {
				// done with this test
				continue nexttest
			}

			tx.TxIn[j].SignatureScript = script
		}

		// If testing using a correct sigscript but for an incorrect
		// index, use last input script for first input.  Requires > 0
		// inputs for test.
		if sigScriptTests[i].scriptAtWrongIndex {
			tx.TxIn[0].SignatureScript = script
			sigScriptTests[i].inputs[0].inputValidates = false
		}

		// Validate tx input scripts
		scriptFlags := ScriptBip16 | ScriptVerifyDERSignatures
		for j := range tx.TxIn {
			vm, err := NewEngine(sigScriptTests[i].
				inputs[j].txout.PkScript, tx, j, scriptFlags, nil, nil, 0)
			if err != nil {
				t.Errorf("cannot create script vm for test %v: %v",
					sigScriptTests[i].name, err)
				continue nexttest
			}
			err = vm.Execute()
			if (err == nil) != sigScriptTests[i].inputs[j].inputValidates {
				if err == nil {
					t.Errorf("passed test '%v' validation incorrectly: %v",
						sigScriptTests[i].name, err)
				} else {
					t.Errorf("failed test '%v' validation: %v",
						sigScriptTests[i].name, err)
				}
				continue nexttest
			}
		}
	}
}
Ejemplo n.º 17
0
func testJoinMempools(r *Harness, t *testing.T) {
	// Assert main test harness has no transactions in its mempool.
	pooledHashes, err := r.Node.GetRawMempool()
	if err != nil {
		t.Fatalf("unable to get mempool for main test harness: %v", err)
	}
	if len(pooledHashes) != 0 {
		t.Fatal("main test harness mempool not empty")
	}

	// Create a local test harness with only the genesis block.  The nodes
	// will be synced below so the same transaction can be sent to both
	// nodes without it being an orphan.
	harness, err := New(&chaincfg.SimNetParams, nil, nil)
	if err != nil {
		t.Fatal(err)
	}
	if err := harness.SetUp(false, 0); err != nil {
		t.Fatalf("unable to complete rpctest setup: %v", err)
	}
	defer harness.TearDown()

	nodeSlice := []*Harness{r, harness}

	// Both mempools should be considered synced as they are empty.
	// Therefore, this should return instantly.
	if err := JoinNodes(nodeSlice, Mempools); err != nil {
		t.Fatalf("unable to join node on mempools: %v", err)
	}

	// Generate a coinbase spend to a new address within the main harness'
	// mempool.
	addr, err := r.NewAddress()
	addrScript, err := txscript.PayToAddrScript(addr)
	if err != nil {
		t.Fatalf("unable to generate pkscript to addr: %v", err)
	}
	output := wire.NewTxOut(5e8, addrScript)
	testTx, err := r.CreateTransaction([]*wire.TxOut{output}, 10)
	if err != nil {
		t.Fatalf("coinbase spend failed: %v", err)
	}
	if _, err := r.Node.SendRawTransaction(testTx, true); err != nil {
		t.Fatalf("send transaction failed: %v", err)
	}

	// Wait until the transaction shows up to ensure the two mempools are
	// not the same.
	harnessSynced := make(chan struct{})
	go func() {
		for {
			poolHashes, err := r.Node.GetRawMempool()
			if err != nil {
				t.Fatalf("failed to retrieve harness mempool: %v", err)
			}
			if len(poolHashes) > 0 {
				break
			}
			time.Sleep(time.Millisecond * 100)
		}
		harnessSynced <- struct{}{}
	}()
	select {
	case <-harnessSynced:
	case <-time.After(time.Minute):
		t.Fatalf("harness node never received transaction")
	}

	// This select case should fall through to the default as the goroutine
	// should be blocked on the JoinNodes call.
	poolsSynced := make(chan struct{})
	go func() {
		if err := JoinNodes(nodeSlice, Mempools); err != nil {
			t.Fatalf("unable to join node on mempools: %v", err)
		}
		poolsSynced <- struct{}{}
	}()
	select {
	case <-poolsSynced:
		t.Fatalf("mempools detected as synced yet harness has a new tx")
	default:
	}

	// Establish an outbound connection from the local harness to the main
	// harness and wait for the chains to be synced.
	if err := ConnectNode(harness, r); err != nil {
		t.Fatalf("unable to connect harnesses: %v", err)
	}
	if err := JoinNodes(nodeSlice, Blocks); err != nil {
		t.Fatalf("unable to join node on blocks: %v", err)
	}

	// Send the transaction to the local harness which will result in synced
	// mempools.
	if _, err := harness.Node.SendRawTransaction(testTx, true); err != nil {
		t.Fatalf("send transaction failed: %v", err)
	}

	// Select once again with a special timeout case after 1 minute. The
	// goroutine above should now be blocked on sending into the unbuffered
	// channel. The send should immediately succeed. In order to avoid the
	// test hanging indefinitely, a 1 minute timeout is in place.
	select {
	case <-poolsSynced:
		// fall through
	case <-time.After(time.Minute):
		t.Fatalf("mempools never detected as synced")
	}
}
Ejemplo n.º 18
0
// SendCoins does send coins, but it's very rudimentary
// wit makes it into p2wpkh.  Which is not yet spendable.
func (s *SPVCon) SendCoins(adrs []btcutil.Address, sendAmts []int64) error {
	if len(adrs) != len(sendAmts) {
		return fmt.Errorf("%d addresses and %d amounts", len(adrs), len(sendAmts))
	}
	var err error
	var score, totalSend, fee int64
	dustCutoff := int64(20000) // below this amount, just give to miners
	satPerByte := int64(80)    // satoshis per byte fee; have as arg later
	rawUtxos, err := s.TS.GetAllUtxos()
	if err != nil {
		return err
	}
	var allUtxos SortableUtxoSlice
	// start with utxos sorted by value.

	for _, utxo := range rawUtxos {
		score += utxo.Value
		allUtxos = append(allUtxos, *utxo)
	}
	// smallest and unconfirmed last (because it's reversed)
	sort.Sort(sort.Reverse(allUtxos))

	//	sort.Reverse(allUtxos)
	for _, amt := range sendAmts {
		totalSend += amt
	}
	// important rule in bitcoin, output total > input total is invalid.
	if totalSend > score {
		return fmt.Errorf("trying to send %d but %d available.",
			totalSend, score)
	}

	tx := wire.NewMsgTx() // make new tx
	// add non-change (arg) outputs
	for i, adr := range adrs {
		// make address script 76a914...88ac or 0014...
		outAdrScript, err := txscript.PayToAddrScript(adr)
		if err != nil {
			return err
		}
		// make user specified txout and add to tx
		txout := wire.NewTxOut(sendAmts[i], outAdrScript)
		tx.AddTxOut(txout)
	}

	// generate a utxo slice for your inputs
	var ins utxoSlice

	// add utxos until we've had enough
	nokori := totalSend // nokori is how much is needed on input side
	for _, utxo := range allUtxos {
		// skip unconfirmed.  Or de-prioritize?
		//		if utxo.AtHeight == 0 {
		//			continue
		//		}

		// yeah, lets add this utxo!
		ins = append(ins, utxo)
		// as we add utxos, fill in sigscripts
		// generate previous pkscripts (subscritpt?) for all utxos
		// then make txins with the utxo and prevpk, and insert them into the tx
		// these are all zeroed out during signing but it's an easy way to keep track
		var prevPKs []byte
		if utxo.IsWit {
			//tx.Flags = 0x01
			wa, err := btcutil.NewAddressWitnessPubKeyHash(
				s.TS.Adrs[utxo.KeyIdx].PkhAdr.ScriptAddress(), s.TS.Param)
			prevPKs, err = txscript.PayToAddrScript(wa)
			if err != nil {
				return err
			}
		} else { // otherwise generate directly
			prevPKs, err = txscript.PayToAddrScript(
				s.TS.Adrs[utxo.KeyIdx].PkhAdr)
			if err != nil {
				return err
			}
		}
		tx.AddTxIn(wire.NewTxIn(&utxo.Op, prevPKs, nil))
		nokori -= utxo.Value
		// if nokori is positive, don't bother checking fee yet.
		if nokori < 0 {
			fee = EstFee(tx, satPerByte)
			if nokori < -fee { // done adding utxos: nokori below negative est. fee
				break
			}
		}
	}

	// see if there's enough left to also add a change output

	changeOld, err := s.TS.NewAdr() // change is witnessy
	if err != nil {
		return err
	}
	changeAdr, err := btcutil.NewAddressWitnessPubKeyHash(
		changeOld.ScriptAddress(), s.TS.Param)
	if err != nil {
		return err
	}

	changeScript, err := txscript.PayToAddrScript(changeAdr)
	if err != nil {
		return err
	}

	changeOut := wire.NewTxOut(0, changeScript)
	tx.AddTxOut(changeOut)
	fee = EstFee(tx, satPerByte)
	changeOut.Value = -(nokori + fee)
	if changeOut.Value < dustCutoff {
		// remove last output (change) : not worth it
		tx.TxOut = tx.TxOut[:len(tx.TxOut)-1]
	}

	// sort utxos on the input side.  use this instead of txsort
	// because we want to remember which keys are associated with which inputs
	sort.Sort(ins)

	// sort tx -- this only will change txouts since inputs are already sorted
	txsort.InPlaceSort(tx)

	// tx is ready for signing,
	sigStash := make([][]byte, len(ins))
	witStash := make([][][]byte, len(ins))

	// generate tx-wide hashCache for segwit stuff
	// middle index number doesn't matter for sighashAll.
	hCache := txscript.NewTxSigHashes(tx)

	for i, txin := range tx.TxIn {
		// pick key
		child, err := s.TS.rootPrivKey.Child(
			ins[i].KeyIdx + hdkeychain.HardenedKeyStart)
		if err != nil {
			return err
		}
		priv, err := child.ECPrivKey()
		if err != nil {
			return err
		}

		// This is where witness based sighash types need to happen
		// sign into stash
		if ins[i].IsWit {
			witStash[i], err = txscript.WitnessScript(
				tx, hCache, i, ins[i].Value, txin.SignatureScript,
				txscript.SigHashAll, priv, true)
			if err != nil {
				return err
			}
		} else {
			sigStash[i], err = txscript.SignatureScript(
				tx, i, txin.SignatureScript,
				txscript.SigHashAll, priv, true)
			if err != nil {
				return err
			}
		}
	}
	// swap sigs into sigScripts in txins
	for i, txin := range tx.TxIn {
		if sigStash[i] != nil {
			txin.SignatureScript = sigStash[i]
		}
		if witStash[i] != nil {
			txin.Witness = witStash[i]
			txin.SignatureScript = nil
		}

	}

	//	fmt.Printf("tx: %s", TxToString(tx))
	//	buf := bytes.NewBuffer(make([]byte, 0, tx.SerializeSize()))

	// send it out on the wire.  hope it gets there.
	// we should deal with rejects.  Don't yet.
	err = s.NewOutgoingTx(tx)
	if err != nil {
		return err
	}
	return nil
}
Ejemplo n.º 19
0
func (s *SPVCon) SendOne(u Utxo, adr btcutil.Address) error {
	// fixed fee
	fee := int64(5000)

	sendAmt := u.Value - fee
	tx := wire.NewMsgTx() // make new tx
	// add single output
	outAdrScript, err := txscript.PayToAddrScript(adr)
	if err != nil {
		return err
	}
	// make user specified txout and add to tx
	txout := wire.NewTxOut(sendAmt, outAdrScript)
	tx.AddTxOut(txout)

	var prevPKs []byte
	if u.IsWit {
		//tx.Flags = 0x01
		wa, err := btcutil.NewAddressWitnessPubKeyHash(
			s.TS.Adrs[u.KeyIdx].PkhAdr.ScriptAddress(), s.TS.Param)
		prevPKs, err = txscript.PayToAddrScript(wa)
		if err != nil {
			return err
		}
	} else { // otherwise generate directly
		prevPKs, err = txscript.PayToAddrScript(
			s.TS.Adrs[u.KeyIdx].PkhAdr)
		if err != nil {
			return err
		}
	}

	tx.AddTxIn(wire.NewTxIn(&u.Op, prevPKs, nil))

	var sig []byte
	var wit [][]byte
	hCache := txscript.NewTxSigHashes(tx)

	child, err := s.TS.rootPrivKey.Child(u.KeyIdx + hdkeychain.HardenedKeyStart)

	if err != nil {
		return err
	}
	priv, err := child.ECPrivKey()
	if err != nil {
		return err
	}

	// This is where witness based sighash types need to happen
	// sign into stash
	if u.IsWit {
		wit, err = txscript.WitnessScript(
			tx, hCache, 0, u.Value, tx.TxIn[0].SignatureScript,
			txscript.SigHashAll, priv, true)
		if err != nil {
			return err
		}
	} else {
		sig, err = txscript.SignatureScript(
			tx, 0, tx.TxIn[0].SignatureScript,
			txscript.SigHashAll, priv, true)
		if err != nil {
			return err
		}
	}

	// swap sigs into sigScripts in txins

	if sig != nil {
		tx.TxIn[0].SignatureScript = sig
	}
	if wit != nil {
		tx.TxIn[0].Witness = wit
		tx.TxIn[0].SignatureScript = nil
	}
	return s.NewOutgoingTx(tx)
}
Ejemplo n.º 20
0
// newBobNode generates a test "ln node" to interact with Alice (us). For the
// funding transaction, bob has a single output totaling 7BTC. For our basic
// test, he'll fund the channel with 5BTC, leaving 2BTC to the change output.
// TODO(roasbeef): proper handling of change etc.
func newBobNode(miner *rpctest.Harness, amt btcutil.Amount) (*bobNode, error) {
	// First, parse Bob's priv key in order to obtain a key he'll use for the
	// multi-sig funding transaction.
	privKey, pubKey := btcec.PrivKeyFromBytes(btcec.S256(), bobsPrivKey)

	// Next, generate an output redeemable by bob.
	pkHash := btcutil.Hash160(pubKey.SerializeCompressed())
	bobAddr, err := btcutil.NewAddressWitnessPubKeyHash(
		pkHash,
		miner.ActiveNet)
	if err != nil {
		return nil, err
	}
	bobAddrScript, err := txscript.PayToAddrScript(bobAddr)
	if err != nil {
		return nil, err
	}

	// Give bobNode one 7 BTC output for use in creating channels.
	output := &wire.TxOut{7e8, bobAddrScript}
	mainTxid, err := miner.CoinbaseSpend([]*wire.TxOut{output})
	if err != nil {
		return nil, err
	}

	// Mine a block in order to include the above output in a block. During
	// the reservation workflow, we currently test to ensure that the funding
	// output we're given actually exists.
	if _, err := miner.Node.Generate(1); err != nil {
		return nil, err
	}

	// Grab the transaction in order to locate the output index to Bob.
	tx, err := miner.Node.GetRawTransaction(mainTxid)
	if err != nil {
		return nil, err
	}
	found, index := lnwallet.FindScriptOutputIndex(tx.MsgTx(), bobAddrScript)
	if !found {
		return nil, fmt.Errorf("output to bob never created")
	}

	prevOut := wire.NewOutPoint(mainTxid, index)
	bobTxIn := wire.NewTxIn(prevOut, nil, nil)

	// Using bobs priv key above, create a change output he can spend.
	bobChangeOutput := wire.NewTxOut(2*1e8, bobAddrScript)

	// Bob's initial revocation hash is just his private key with the first
	// byte changed...
	var revocation [32]byte
	copy(revocation[:], bobsPrivKey)
	revocation[0] = 0xff

	// His ID is just as creative...
	var id [wire.HashSize]byte
	id[0] = 0xff

	return &bobNode{
		id:               pubKey,
		privKey:          privKey,
		channelKey:       pubKey,
		deliveryAddress:  bobAddr,
		revocation:       revocation,
		fundingAmt:       amt,
		delay:            5,
		availableOutputs: []*wire.TxIn{bobTxIn},
		changeOutputs:    []*wire.TxOut{bobChangeOutput},
	}, nil
}
Ejemplo n.º 21
0
func TestInsertsCreditsDebitsRollbacks(t *testing.T) {
	t.Parallel()

	// Create a double spend of the received blockchain transaction.
	dupRecvTx, _ := btcutil.NewTxFromBytes(TstRecvSerializedTx)
	// Switch txout amount to 1 BTC.  Transaction store doesn't
	// validate txs, so this is fine for testing a double spend
	// removal.
	TstDupRecvAmount := int64(1e8)
	newDupMsgTx := dupRecvTx.MsgTx()
	newDupMsgTx.TxOut[0].Value = TstDupRecvAmount
	TstDoubleSpendTx := btcutil.NewTx(newDupMsgTx)
	TstDoubleSpendSerializedTx := serializeTx(TstDoubleSpendTx)

	// Create a "signed" (with invalid sigs) tx that spends output 0 of
	// the double spend.
	spendingTx := wire.NewMsgTx()
	spendingTxIn := wire.NewTxIn(wire.NewOutPoint(TstDoubleSpendTx.Sha(), 0), []byte{0, 1, 2, 3, 4})
	spendingTx.AddTxIn(spendingTxIn)
	spendingTxOut1 := wire.NewTxOut(1e7, []byte{5, 6, 7, 8, 9})
	spendingTxOut2 := wire.NewTxOut(9e7, []byte{10, 11, 12, 13, 14})
	spendingTx.AddTxOut(spendingTxOut1)
	spendingTx.AddTxOut(spendingTxOut2)
	TstSpendingTx := btcutil.NewTx(spendingTx)
	TstSpendingSerializedTx := serializeTx(TstSpendingTx)
	var _ = TstSpendingTx

	tests := []struct {
		name     string
		f        func(*Store) (*Store, error)
		bal, unc btcutil.Amount
		unspents map[wire.OutPoint]struct{}
		unmined  map[wire.ShaHash]struct{}
	}{
		{
			name: "new store",
			f: func(s *Store) (*Store, error) {
				return s, nil
			},
			bal:      0,
			unc:      0,
			unspents: map[wire.OutPoint]struct{}{},
			unmined:  map[wire.ShaHash]struct{}{},
		},
		{
			name: "txout insert",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstRecvSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, nil)
				if err != nil {
					return nil, err
				}

				err = s.AddCredit(rec, nil, 0, false)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstRecvTx.MsgTx().TxOut[0].Value),
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstRecvTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstRecvTx.Sha(): {},
			},
		},
		{
			name: "insert duplicate unconfirmed",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstRecvSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, nil)
				if err != nil {
					return nil, err
				}

				err = s.AddCredit(rec, nil, 0, false)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstRecvTx.MsgTx().TxOut[0].Value),
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstRecvTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstRecvTx.Sha(): {},
			},
		},
		{
			name: "confirmed txout insert",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstRecvSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, TstRecvTxBlockDetails)
				if err != nil {
					return nil, err
				}

				err = s.AddCredit(rec, TstRecvTxBlockDetails, 0, false)
				return s, err
			},
			bal: btcutil.Amount(TstRecvTx.MsgTx().TxOut[0].Value),
			unc: 0,
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstRecvTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{},
		},
		{
			name: "insert duplicate confirmed",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstRecvSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, TstRecvTxBlockDetails)
				if err != nil {
					return nil, err
				}

				err = s.AddCredit(rec, TstRecvTxBlockDetails, 0, false)
				return s, err
			},
			bal: btcutil.Amount(TstRecvTx.MsgTx().TxOut[0].Value),
			unc: 0,
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstRecvTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{},
		},
		{
			name: "rollback confirmed credit",
			f: func(s *Store) (*Store, error) {
				err := s.Rollback(TstRecvTxBlockDetails.Height)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstRecvTx.MsgTx().TxOut[0].Value),
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstRecvTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstRecvTx.Sha(): {},
			},
		},
		{
			name: "insert confirmed double spend",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstDoubleSpendSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, TstRecvTxBlockDetails)
				if err != nil {
					return nil, err
				}

				err = s.AddCredit(rec, TstRecvTxBlockDetails, 0, false)
				return s, err
			},
			bal: btcutil.Amount(TstDoubleSpendTx.MsgTx().TxOut[0].Value),
			unc: 0,
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstDoubleSpendTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{},
		},
		{
			name: "insert unconfirmed debit",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstSpendingSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, nil)
				return s, err
			},
			bal:      0,
			unc:      0,
			unspents: map[wire.OutPoint]struct{}{},
			unmined: map[wire.ShaHash]struct{}{
				*TstSpendingTx.Sha(): {},
			},
		},
		{
			name: "insert unconfirmed debit again",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstDoubleSpendSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, TstRecvTxBlockDetails)
				return s, err
			},
			bal:      0,
			unc:      0,
			unspents: map[wire.OutPoint]struct{}{},
			unmined: map[wire.ShaHash]struct{}{
				*TstSpendingTx.Sha(): {},
			},
		},
		{
			name: "insert change (index 0)",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstSpendingSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, nil)
				if err != nil {
					return nil, err
				}

				err = s.AddCredit(rec, nil, 0, true)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstSpendingTx.MsgTx().TxOut[0].Value),
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 0,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstSpendingTx.Sha(): {},
			},
		},
		{
			name: "insert output back to this own wallet (index 1)",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstSpendingSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, nil)
				if err != nil {
					return nil, err
				}
				err = s.AddCredit(rec, nil, 1, true)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstSpendingTx.MsgTx().TxOut[0].Value + TstSpendingTx.MsgTx().TxOut[1].Value),
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 0,
				}: {},
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 1,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstSpendingTx.Sha(): {},
			},
		},
		{
			name: "confirm signed tx",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstSpendingSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, TstSignedTxBlockDetails)
				return s, err
			},
			bal: btcutil.Amount(TstSpendingTx.MsgTx().TxOut[0].Value + TstSpendingTx.MsgTx().TxOut[1].Value),
			unc: 0,
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 0,
				}: {},
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 1,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{},
		},
		{
			name: "rollback after spending tx",
			f: func(s *Store) (*Store, error) {
				err := s.Rollback(TstSignedTxBlockDetails.Height + 1)
				return s, err
			},
			bal: btcutil.Amount(TstSpendingTx.MsgTx().TxOut[0].Value + TstSpendingTx.MsgTx().TxOut[1].Value),
			unc: 0,
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 0,
				}: {},
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 1,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{},
		},
		{
			name: "rollback spending tx block",
			f: func(s *Store) (*Store, error) {
				err := s.Rollback(TstSignedTxBlockDetails.Height)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstSpendingTx.MsgTx().TxOut[0].Value + TstSpendingTx.MsgTx().TxOut[1].Value),
			unspents: map[wire.OutPoint]struct{}{
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 0,
				}: {},
				wire.OutPoint{
					Hash:  *TstSpendingTx.Sha(),
					Index: 1,
				}: {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstSpendingTx.Sha(): {},
			},
		},
		{
			name: "rollback double spend tx block",
			f: func(s *Store) (*Store, error) {
				err := s.Rollback(TstRecvTxBlockDetails.Height)
				return s, err
			},
			bal: 0,
			unc: btcutil.Amount(TstSpendingTx.MsgTx().TxOut[0].Value + TstSpendingTx.MsgTx().TxOut[1].Value),
			unspents: map[wire.OutPoint]struct{}{
				*wire.NewOutPoint(TstSpendingTx.Sha(), 0): {},
				*wire.NewOutPoint(TstSpendingTx.Sha(), 1): {},
			},
			unmined: map[wire.ShaHash]struct{}{
				*TstDoubleSpendTx.Sha(): {},
				*TstSpendingTx.Sha():    {},
			},
		},
		{
			name: "insert original recv txout",
			f: func(s *Store) (*Store, error) {
				rec, err := NewTxRecord(TstRecvSerializedTx, time.Now())
				if err != nil {
					return nil, err
				}
				err = s.InsertTx(rec, TstRecvTxBlockDetails)
				if err != nil {
					return nil, err
				}
				err = s.AddCredit(rec, TstRecvTxBlockDetails, 0, false)
				return s, err
			},
			bal: btcutil.Amount(TstRecvTx.MsgTx().TxOut[0].Value),
			unc: 0,
			unspents: map[wire.OutPoint]struct{}{
				*wire.NewOutPoint(TstRecvTx.Sha(), 0): {},
			},
			unmined: map[wire.ShaHash]struct{}{},
		},
	}

	s, teardown, err := testStore()
	defer teardown()
	if err != nil {
		t.Fatal(err)
	}

	for _, test := range tests {
		tmpStore, err := test.f(s)
		if err != nil {
			t.Fatalf("%s: got error: %v", test.name, err)
		}
		s = tmpStore
		bal, err := s.Balance(1, TstRecvCurrentHeight)
		if err != nil {
			t.Fatalf("%s: Confirmed Balance failed: %v", test.name, err)
		}
		if bal != test.bal {
			t.Fatalf("%s: balance mismatch: expected: %d, got: %d", test.name, test.bal, bal)
		}
		unc, err := s.Balance(0, TstRecvCurrentHeight)
		if err != nil {
			t.Fatalf("%s: Unconfirmed Balance failed: %v", test.name, err)
		}
		unc -= bal
		if unc != test.unc {
			t.Fatalf("%s: unconfirmed balance mismatch: expected %d, got %d", test.name, test.unc, unc)
		}

		// Check that unspent outputs match expected.
		unspent, err := s.UnspentOutputs()
		if err != nil {
			t.Fatalf("%s: failed to fetch unspent outputs: %v", test.name, err)
		}
		for _, cred := range unspent {
			if _, ok := test.unspents[cred.OutPoint]; !ok {
				t.Errorf("%s: unexpected unspent output: %v", test.name, cred.OutPoint)
			}
			delete(test.unspents, cred.OutPoint)
		}
		if len(test.unspents) != 0 {
			t.Fatalf("%s: missing expected unspent output(s)", test.name)
		}

		// Check that unmined txs match expected.
		unmined, err := s.UnminedTxs()
		if err != nil {
			t.Fatalf("%s: cannot load unmined transactions: %v", test.name, err)
		}
		for _, tx := range unmined {
			txHash := tx.TxSha()
			if _, ok := test.unmined[txHash]; !ok {
				t.Fatalf("%s: unexpected unmined tx: %v", test.name, txHash)
			}
			delete(test.unmined, txHash)
		}
		if len(test.unmined) != 0 {
			t.Fatalf("%s: missing expected unmined tx(s)", test.name)
		}

	}
}
Ejemplo n.º 22
0
func testListTransactionDetails(miner *rpctest.Harness, wallet *lnwallet.LightningWallet, t *testing.T) {
	t.Log("Running list transaction details test")

	// Create 5 new outputs spendable by the wallet.
	const numTxns = 5
	const outputAmt = btcutil.SatoshiPerBitcoin
	txids := make(map[wire.ShaHash]struct{})
	for i := 0; i < numTxns; i++ {
		addr, err := wallet.NewAddress(lnwallet.WitnessPubKey, false)
		if err != nil {
			t.Fatalf("unable to create new address: %v", err)
		}
		script, err := txscript.PayToAddrScript(addr)
		if err != nil {
			t.Fatalf("unable to create output script: %v", err)
		}

		output := &wire.TxOut{outputAmt, script}
		txid, err := miner.CoinbaseSpend([]*wire.TxOut{output})
		if err != nil {
			t.Fatalf("unable to send coinbase: %v", err)
		}
		txids[*txid] = struct{}{}
	}

	// Generate 10 blocks to mine all the transactions created above.
	const numBlocksMined = 10
	blocks, err := miner.Node.Generate(numBlocksMined)
	if err != nil {
		t.Fatalf("unable to mine blocks: %v", err)
	}

	// Next, fetch all the current transaction details.
	// TODO(roasbeef): use ntfn client here instead?
	time.Sleep(time.Second * 2)
	txDetails, err := wallet.ListTransactionDetails()
	if err != nil {
		t.Fatalf("unable to fetch tx details: %v", err)
	}

	// Each of the transactions created above should be found with the
	// proper details populated.
	for _, txDetail := range txDetails {
		if _, ok := txids[txDetail.Hash]; !ok {
			continue
		}

		if txDetail.NumConfirmations != numBlocksMined {
			t.Fatalf("num confs incorrect, got %v expected %v",
				txDetail.NumConfirmations, numBlocksMined)
		}
		if txDetail.Value != outputAmt {
			t.Fatalf("tx value incorrect, got %v expected %v",
				txDetail.Value, outputAmt)
		}
		if !bytes.Equal(txDetail.BlockHash[:], blocks[0][:]) {
			t.Fatalf("block hash mismatch, got %v expected %v",
				txDetail.BlockHash, blocks[0])
		}

		delete(txids, txDetail.Hash)
	}
	if len(txids) != 0 {
		t.Fatalf("all transactions not found in details!")
	}

	// Next create a transaction paying to an output which isn't under the
	// wallet's control.
	b := txscript.NewScriptBuilder()
	b.AddOp(txscript.OP_0)
	outputScript, err := b.Script()
	if err != nil {
		t.Fatalf("unable to make output script: %v", err)
	}
	burnOutput := wire.NewTxOut(outputAmt, outputScript)
	burnTXID, err := wallet.SendOutputs([]*wire.TxOut{burnOutput})
	if err != nil {
		t.Fatalf("unable to create burn tx: %v", err)
	}
	burnBlock, err := miner.Node.Generate(1)
	if err != nil {
		t.Fatalf("unable to mine block: %v", err)
	}

	// Fetch the transaction details again, the new transaction should be
	// shown as debiting from the wallet's balance.
	time.Sleep(time.Second * 2)
	txDetails, err = wallet.ListTransactionDetails()
	if err != nil {
		t.Fatalf("unable to fetch tx details: %v", err)
	}
	var burnTxFound bool
	for _, txDetail := range txDetails {
		if !bytes.Equal(txDetail.Hash[:], burnTXID[:]) {
			continue
		}

		burnTxFound = true
		if txDetail.NumConfirmations != 1 {
			t.Fatalf("num confs incorrect, got %v expected %v",
				txDetail.NumConfirmations, 1)
		}
		if txDetail.Value >= -outputAmt {
			t.Fatalf("tx value incorrect, got %v expected %v",
				txDetail.Value, -outputAmt)
		}
		if !bytes.Equal(txDetail.BlockHash[:], burnBlock[0][:]) {
			t.Fatalf("block hash mismatch, got %v expected %v",
				txDetail.BlockHash, burnBlock[0])
		}
	}
	if !burnTxFound {
		t.Fatalf("tx burning btc not found")
	}
}
Ejemplo n.º 23
0
func testGenerateAndSubmitBlock(r *Harness, t *testing.T) {
	// Generate a few test spend transactions.
	addr, err := r.NewAddress()
	if err != nil {
		t.Fatalf("unable to generate new address: %v", err)
	}
	pkScript, err := txscript.PayToAddrScript(addr)
	if err != nil {
		t.Fatalf("unable to create script: %v", err)
	}
	output := wire.NewTxOut(btcutil.SatoshiPerBitcoin, pkScript)

	const numTxns = 5
	txns := make([]*btcutil.Tx, 0, numTxns)
	for i := 0; i < numTxns; i++ {
		tx, err := r.CreateTransaction([]*wire.TxOut{output}, 10)
		if err != nil {
			t.Fatalf("unable to create tx: %v", err)
		}

		txns = append(txns, btcutil.NewTx(tx))
	}

	// Now generate a block with the default block version, and a zero'd
	// out time.
	block, err := r.GenerateAndSubmitBlock(txns, -1, time.Time{})
	if err != nil {
		t.Fatalf("unable to generate block: %v", err)
	}

	// Ensure that all created transactions were included, and that the
	// block version was properly set to the default.
	numBlocksTxns := len(block.Transactions())
	if numBlocksTxns != numTxns+1 {
		t.Fatalf("block did not include all transactions: "+
			"expected %v, got %v", numTxns+1, numBlocksTxns)
	}
	blockVersion := block.MsgBlock().Header.Version
	if blockVersion != BlockVersion {
		t.Fatalf("block version is not default: expected %v, got %v",
			BlockVersion, blockVersion)
	}

	// Next generate a block with a "non-standard" block version along with
	// time stamp a minute after the previous block's timestamp.
	timestamp := block.MsgBlock().Header.Timestamp.Add(time.Minute)
	targetBlockVersion := int32(1337)
	block, err = r.GenerateAndSubmitBlock(nil, targetBlockVersion, timestamp)
	if err != nil {
		t.Fatalf("unable to generate block: %v", err)
	}

	// Finally ensure that the desired block version and timestamp were set
	// properly.
	header := block.MsgBlock().Header
	blockVersion = header.Version
	if blockVersion != targetBlockVersion {
		t.Fatalf("block version mismatch: expected %v, got %v",
			targetBlockVersion, blockVersion)
	}
	if !timestamp.Equal(header.Timestamp) {
		t.Fatalf("header time stamp mismatch: expected %v, got %v",
			timestamp, header.Timestamp)
	}
}