func adddynrel(s *ld.Symbol, r *ld.Reloc) {
targ := r.Sym
ld.Ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ld.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_PPC64_REL24:
r.Type = obj.R_CALLPOWER
// This is a local call, so the caller isn't setting
// up r12 and r2 is the same for the caller and
// callee. Hence, we need to go to the local entry
// point. (If we don't do this, the callee will try
// to use r12 to compute r2.)
r.Add += int64(r.Sym.Localentry) * 4
if targ.Type == obj.SDYNIMPORT {
// Should have been handled in elfsetupplt
ld.Diag("unexpected R_PPC64_REL24 for dyn import")
}
return
case 256 + ld.R_PPC_REL32:
r.Type = obj.R_PCREL
r.Add += 4
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_PPC_REL32 for dyn import")
}
return
case 256 + ld.R_PPC64_ADDR64:
r.Type = obj.R_ADDR
if targ.Type == obj.SDYNIMPORT {
// These happen in .toc sections
ld.Adddynsym(ld.Ctxt, targ)
rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
ld.Addaddrplus(ld.Ctxt, rela, s, int64(r.Off))
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_PPC64_ADDR64))
ld.Adduint64(ld.Ctxt, rela, uint64(r.Add))
r.Type = 256 // ignore during relocsym
}
return
case 256 + ld.R_PPC64_TOC16:
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_LO | ld.RV_CHECK_OVERFLOW
return
case 256 + ld.R_PPC64_TOC16_LO:
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_LO
return
case 256 + ld.R_PPC64_TOC16_HA:
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_HA | ld.RV_CHECK_OVERFLOW
return
case 256 + ld.R_PPC64_TOC16_HI:
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_HI | ld.RV_CHECK_OVERFLOW
return
case 256 + ld.R_PPC64_TOC16_DS:
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_DS | ld.RV_CHECK_OVERFLOW
return
case 256 + ld.R_PPC64_TOC16_LO_DS:
r.Type = obj.R_POWER_TOC
r.Variant = ld.RV_POWER_DS
return
case 256 + ld.R_PPC64_REL16_LO:
r.Type = obj.R_PCREL
r.Variant = ld.RV_POWER_LO
r.Add += 2 // Compensate for relocation size of 2
return
case 256 + ld.R_PPC64_REL16_HI:
r.Type = obj.R_PCREL
r.Variant = ld.RV_POWER_HI | ld.RV_CHECK_OVERFLOW
r.Add += 2
return
case 256 + ld.R_PPC64_REL16_HA:
r.Type = obj.R_PCREL
r.Variant = ld.RV_POWER_HA | ld.RV_CHECK_OVERFLOW
r.Add += 2
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
// TODO(austin): Translate our relocations to ELF
ld.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func adddynrel(s *ld.LSym, r *ld.Reloc) {
targ := r.Sym
ld.Ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ld.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_386_PC32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_386_PC32 relocation for dynamic symbol %s", targ.Name)
}
if targ.Type == 0 || targ.Type == obj.SXREF {
ld.Diag("unknown symbol %s in pcrel", targ.Name)
}
r.Type = obj.R_PCREL
r.Add += 4
return
case 256 + ld.R_386_PLT32:
r.Type = obj.R_PCREL
r.Add += 4
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
}
return
case 256 + ld.R_386_GOT32, 256 + ld.R_386_GOT32X:
if targ.Type != obj.SDYNIMPORT {
// have symbol
if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
// turn MOVL of GOT entry into LEAL of symbol address, relative to GOT.
s.P[r.Off-2] = 0x8d
r.Type = obj.R_GOTOFF
return
}
if r.Off >= 2 && s.P[r.Off-2] == 0xff && s.P[r.Off-1] == 0xb3 {
// turn PUSHL of GOT entry into PUSHL of symbol itself.
// use unnecessary SS prefix to keep instruction same length.
s.P[r.Off-2] = 0x36
s.P[r.Off-1] = 0x68
r.Type = obj.R_ADDR
return
}
ld.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
return
}
addgotsym(ld.Ctxt, targ)
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
r.Add += int64(targ.Got)
return
case 256 + ld.R_386_GOTOFF:
r.Type = obj.R_GOTOFF
return
case 256 + ld.R_386_GOTPC:
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += 4
return
case 256 + ld.R_386_32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_386_32 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 0:
r.Type = obj.R_ADDR
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
}
return
case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 1:
if targ.Type == obj.SDYNIMPORT {
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
r.Type = obj.R_PCREL
return
}
r.Type = obj.R_PCREL
return
case 512 + ld.MACHO_FAKE_GOTPCREL:
if targ.Type != obj.SDYNIMPORT {
// have symbol
// turn MOVL of GOT entry into LEAL of symbol itself
if r.Off < 2 || s.P[r.Off-2] != 0x8b {
ld.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
return
}
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
return
}
addgotsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got)
r.Type = obj.R_PCREL
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
switch r.Type {
case obj.R_CALL,
obj.R_PCREL:
addpltsym(ld.Ctxt, targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
return
case obj.R_ADDR:
if s.Type != obj.SDATA {
break
}
if ld.Iself {
ld.Adddynsym(ld.Ctxt, targ)
rel := ld.Linklookup(ld.Ctxt, ".rel", 0)
ld.Addaddrplus(ld.Ctxt, rel, s, int64(r.Off))
ld.Adduint32(ld.Ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_386_32))
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
return
}
if ld.HEADTYPE == obj.Hdarwin && s.Size == PtrSize && r.Off == 0 {
// Mach-O relocations are a royal pain to lay out.
// They use a compact stateful bytecode representation
// that is too much bother to deal with.
// Instead, interpret the C declaration
// void *_Cvar_stderr = &stderr;
// as making _Cvar_stderr the name of a GOT entry
// for stderr. This is separate from the usual GOT entry,
// just in case the C code assigns to the variable,
// and of course it only works for single pointers,
// but we only need to support cgo and that's all it needs.
ld.Adddynsym(ld.Ctxt, targ)
got := ld.Linklookup(ld.Ctxt, ".got", 0)
s.Type = got.Type | obj.SSUB
s.Outer = got
s.Sub = got.Sub
got.Sub = s
s.Value = got.Size
ld.Adduint32(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, ld.Linklookup(ld.Ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
r.Type = 256 // ignore during relocsym
return
}
if ld.HEADTYPE == obj.Hwindows && s.Size == PtrSize {
// nothing to do, the relocation will be laid out in pereloc1
return
}
}
ld.Ctxt.Cursym = s
ld.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
targ := r.Sym
ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ctxt.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_ARM_PLT32:
r.Type = obj.R_CALLARM
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ld.Linklookup(ctxt, ".plt", 0)
r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
}
return
case 256 + ld.R_ARM_THM_PC22: // R_ARM_THM_CALL
ld.Exitf("R_ARM_THM_CALL, are you using -marm?")
return
case 256 + ld.R_ARM_GOT32: // R_ARM_GOT_BREL
if targ.Type != obj.SDYNIMPORT {
addgotsyminternal(ctxt, targ)
} else {
addgotsym(ctxt, targ)
}
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
r.Add += int64(targ.Got)
return
case 256 + ld.R_ARM_GOT_PREL: // GOT(nil) + A - nil
if targ.Type != obj.SDYNIMPORT {
addgotsyminternal(ctxt, targ)
} else {
addgotsym(ctxt, targ)
}
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ctxt, ".got", 0)
r.Add += int64(targ.Got) + 4
return
case 256 + ld.R_ARM_GOTOFF: // R_ARM_GOTOFF32
r.Type = obj.R_GOTOFF
return
case 256 + ld.R_ARM_GOTPC: // R_ARM_BASE_PREL
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ctxt, ".got", 0)
r.Add += 4
return
case 256 + ld.R_ARM_CALL:
r.Type = obj.R_CALLARM
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ld.Linklookup(ctxt, ".plt", 0)
r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
}
return
case 256 + ld.R_ARM_REL32: // R_ARM_REL32
r.Type = obj.R_PCREL
r.Add += 4
return
case 256 + ld.R_ARM_ABS32:
if targ.Type == obj.SDYNIMPORT {
ctxt.Diag("unexpected R_ARM_ABS32 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
// we can just ignore this, because we are targeting ARM V5+ anyway
case 256 + ld.R_ARM_V4BX:
if r.Sym != nil {
// R_ARM_V4BX is ABS relocation, so this symbol is a dummy symbol, ignore it
r.Sym.Type = 0
}
r.Sym = nil
return
case 256 + ld.R_ARM_PC24,
256 + ld.R_ARM_JUMP24:
r.Type = obj.R_CALLARM
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ld.Linklookup(ctxt, ".plt", 0)
r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
}
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
switch r.Type {
case obj.R_CALLARM:
addpltsym(ctxt, targ)
r.Sym = ld.Linklookup(ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
return
case obj.R_ADDR:
if s.Type != obj.SDATA {
break
}
if ld.Iself {
ld.Adddynsym(ctxt, targ)
rel := ld.Linklookup(ctxt, ".rel", 0)
ld.Addaddrplus(ctxt, rel, s, int64(r.Off))
ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_ARM_GLOB_DAT)) // we need a nil + A dynamic reloc
r.Type = obj.R_CONST // write r->add during relocsym
r.Sym = nil
return
}
}
ctxt.Cursym = s
ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
if ld.Linkmode == ld.LinkExternal {
switch r.Type {
default:
return -1
case obj.R_ARM64_GOTPCREL:
var o1, o2 uint32
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
o1 = uint32(*val >> 32)
o2 = uint32(*val)
} else {
o1 = uint32(*val)
o2 = uint32(*val >> 32)
}
// Any relocation against a function symbol is redirected to
// be against a local symbol instead (see putelfsym in
// symtab.go) but unfortunately the system linker was buggy
// when confronted with a R_AARCH64_ADR_GOT_PAGE relocation
// against a local symbol until May 2015
// (https://sourceware.org/bugzilla/show_bug.cgi?id=18270). So
// we convert the adrp; ld64 + R_ARM64_GOTPCREL into adrp;
// add + R_ADDRARM64.
if !(r.Sym.Version != 0 || (r.Sym.Type&obj.SHIDDEN != 0) || r.Sym.Attr.Local()) && r.Sym.Type == obj.STEXT && ld.DynlinkingGo() {
if o2&0xffc00000 != 0xf9400000 {
ld.Ctxt.Diag("R_ARM64_GOTPCREL against unexpected instruction %x", o2)
}
o2 = 0x91000000 | (o2 & 0x000003ff)
r.Type = obj.R_ADDRARM64
}
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o1)<<32 | int64(o2)
} else {
*val = int64(o2)<<32 | int64(o1)
}
fallthrough
case obj.R_ADDRARM64:
r.Done = 0
// set up addend for eventual relocation via outer symbol.
rs := r.Sym
r.Xadd = r.Add
for rs.Outer != nil {
r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
rs = rs.Outer
}
if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
ld.Diag("missing section for %s", rs.Name)
}
r.Xsym = rs
// Note: ld64 currently has a bug that any non-zero addend for BR26 relocation
// will make the linking fail because it thinks the code is not PIC even though
// the BR26 relocation should be fully resolved at link time.
// That is the reason why the next if block is disabled. When the bug in ld64
// is fixed, we can enable this block and also enable duff's device in cmd/7g.
if false && ld.HEADTYPE == obj.Hdarwin {
var o0, o1 uint32
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
o0 = uint32(*val >> 32)
o1 = uint32(*val)
} else {
o0 = uint32(*val)
o1 = uint32(*val >> 32)
}
// Mach-O wants the addend to be encoded in the instruction
// Note that although Mach-O supports ARM64_RELOC_ADDEND, it
// can only encode 24-bit of signed addend, but the instructions
// supports 33-bit of signed addend, so we always encode the
// addend in place.
o0 |= (uint32((r.Xadd>>12)&3) << 29) | (uint32((r.Xadd>>12>>2)&0x7ffff) << 5)
o1 |= uint32(r.Xadd&0xfff) << 10
r.Xadd = 0
// when laid out, the instruction order must always be o1, o2.
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o0)<<32 | int64(o1)
} else {
*val = int64(o1)<<32 | int64(o0)
}
}
return 0
case obj.R_CALLARM64,
obj.R_ARM64_TLS_LE,
obj.R_ARM64_TLS_IE:
r.Done = 0
r.Xsym = r.Sym
r.Xadd = r.Add
return 0
}
}
switch r.Type {
case obj.R_CONST:
*val = r.Add
return 0
case obj.R_GOTOFF:
*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
return 0
case obj.R_ADDRARM64:
t := ld.Symaddr(r.Sym) + r.Add - ((s.Value + int64(r.Off)) &^ 0xfff)
if t >= 1<<32 || t < -1<<32 {
ld.Diag("program too large, address relocation distance = %d", t)
}
var o0, o1 uint32
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
o0 = uint32(*val >> 32)
o1 = uint32(*val)
} else {
o0 = uint32(*val)
o1 = uint32(*val >> 32)
}
o0 |= (uint32((t>>12)&3) << 29) | (uint32((t>>12>>2)&0x7ffff) << 5)
o1 |= uint32(t&0xfff) << 10
// when laid out, the instruction order must always be o1, o2.
if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
*val = int64(o0)<<32 | int64(o1)
} else {
*val = int64(o1)<<32 | int64(o0)
}
return 0
case obj.R_ARM64_TLS_LE:
r.Done = 0
if ld.HEADTYPE != obj.Hlinux {
ld.Diag("TLS reloc on unsupported OS %s", ld.Headstr(int(ld.HEADTYPE)))
}
// The TCB is two pointers. This is not documented anywhere, but is
// de facto part of the ABI.
v := r.Sym.Value + int64(2*ld.Thearch.Ptrsize)
if v < 0 || v >= 32678 {
ld.Diag("TLS offset out of range %d", v)
}
*val |= v << 5
return 0
case obj.R_CALLARM64:
t := (ld.Symaddr(r.Sym) + r.Add) - (s.Value + int64(r.Off))
if t >= 1<<27 || t < -1<<27 {
ld.Diag("program too large, call relocation distance = %d", t)
}
*val |= (t >> 2) & 0x03ffffff
return 0
}
return -1
}
func adddynrel(s *ld.LSym, r *ld.Reloc) {
targ := r.Sym
ld.Ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ld.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_X86_64_PC32:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
}
if targ.Type == 0 || targ.Type == obj.SXREF {
ld.Diag("unknown symbol %s in pcrel", targ.Name)
}
r.Type = obj.R_PCREL
r.Add += 4
return
case 256 + ld.R_X86_64_PLT32:
r.Type = obj.R_PCREL
r.Add += 4
if targ.Type == obj.SDYNIMPORT {
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
}
return
case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
if targ.Type != obj.SDYNIMPORT {
// have symbol
if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
// turn MOVQ of GOT entry into LEAQ of symbol itself
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
r.Add += 4
return
}
}
// fall back to using GOT and hope for the best (CMOV*)
// TODO: just needs relocation, no need to put in .dynsym
addgotsym(targ)
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += 4
r.Add += int64(targ.Got)
return
case 256 + ld.R_X86_64_64:
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
// Handle relocations found in Mach-O object files.
case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
// TODO: What is the difference between all these?
r.Type = obj.R_ADDR
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
}
return
case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
if targ.Type == obj.SDYNIMPORT {
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
r.Type = obj.R_PCREL
return
}
fallthrough
// fall through
case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
r.Type = obj.R_PCREL
if targ.Type == obj.SDYNIMPORT {
ld.Diag("unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
}
return
case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
if targ.Type != obj.SDYNIMPORT {
// have symbol
// turn MOVQ of GOT entry into LEAQ of symbol itself
if r.Off < 2 || s.P[r.Off-2] != 0x8b {
ld.Diag("unexpected GOT_LOAD reloc for non-dynamic symbol %s", targ.Name)
return
}
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
return
}
fallthrough
// fall through
case 512 + ld.MACHO_X86_64_RELOC_GOT*2 + 1:
if targ.Type != obj.SDYNIMPORT {
ld.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
}
addgotsym(targ)
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got)
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
switch r.Type {
case obj.R_CALL,
obj.R_PCREL:
if ld.HEADTYPE == obj.Hwindows {
// nothing to do, the relocation will be laid out in pereloc1
return
} else {
// for both ELF and Mach-O
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add = int64(targ.Plt)
return
}
case obj.R_ADDR:
if s.Type == obj.STEXT && ld.Iself {
if ld.HEADTYPE == obj.Hsolaris {
addpltsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
return
}
// The code is asking for the address of an external
// function. We provide it with the address of the
// correspondent GOT symbol.
addgotsym(targ)
r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
r.Add += int64(targ.Got)
return
}
if s.Type != obj.SDATA {
break
}
if ld.Iself {
ld.Adddynsym(ld.Ctxt, targ)
rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
ld.Addaddrplus(ld.Ctxt, rela, s, int64(r.Off))
if r.Siz == 8 {
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_64))
} else {
ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_32))
}
ld.Adduint64(ld.Ctxt, rela, uint64(r.Add))
r.Type = 256 // ignore during relocsym
return
}
if ld.HEADTYPE == obj.Hdarwin && s.Size == int64(ld.Thearch.Ptrsize) && r.Off == 0 {
// Mach-O relocations are a royal pain to lay out.
// They use a compact stateful bytecode representation
// that is too much bother to deal with.
// Instead, interpret the C declaration
// void *_Cvar_stderr = &stderr;
// as making _Cvar_stderr the name of a GOT entry
// for stderr. This is separate from the usual GOT entry,
// just in case the C code assigns to the variable,
// and of course it only works for single pointers,
// but we only need to support cgo and that's all it needs.
ld.Adddynsym(ld.Ctxt, targ)
got := ld.Linklookup(ld.Ctxt, ".got", 0)
s.Type = got.Type | obj.SSUB
s.Outer = got
s.Sub = got.Sub
got.Sub = s
s.Value = got.Size
ld.Adduint64(ld.Ctxt, got, 0)
ld.Adduint32(ld.Ctxt, ld.Linklookup(ld.Ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
r.Type = 256 // ignore during relocsym
return
}
if ld.HEADTYPE == obj.Hwindows {
// nothing to do, the relocation will be laid out in pereloc1
return
}
}
ld.Ctxt.Cursym = s
ld.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
targ := r.Sym
ctxt.Cursym = s
switch r.Type {
default:
if r.Type >= 256 {
ctxt.Diag("unexpected relocation type %d", r.Type)
return
}
// Handle relocations found in ELF object files.
case 256 + ld.R_390_12,
256 + ld.R_390_GOT12:
ctxt.Diag("s390x 12-bit relocations have not been implemented (relocation type %d)", r.Type-256)
return
case 256 + ld.R_390_8,
256 + ld.R_390_16,
256 + ld.R_390_32,
256 + ld.R_390_64:
if targ.Type == obj.SDYNIMPORT {
ctxt.Diag("unexpected R_390_nn relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return
case 256 + ld.R_390_PC16,
256 + ld.R_390_PC32,
256 + ld.R_390_PC64:
if targ.Type == obj.SDYNIMPORT {
ctxt.Diag("unexpected R_390_PCnn relocation for dynamic symbol %s", targ.Name)
}
if targ.Type == 0 || targ.Type == obj.SXREF {
ctxt.Diag("unknown symbol %s in pcrel", targ.Name)
}
r.Type = obj.R_PCREL
r.Add += int64(r.Siz)
return
case 256 + ld.R_390_GOT16,
256 + ld.R_390_GOT32,
256 + ld.R_390_GOT64:
ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
return
case 256 + ld.R_390_PLT16DBL,
256 + ld.R_390_PLT32DBL:
r.Type = obj.R_PCREL
r.Variant = ld.RV_390_DBL
r.Add += int64(r.Siz)
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ld.Linklookup(ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
}
return
case 256 + ld.R_390_PLT32,
256 + ld.R_390_PLT64:
r.Type = obj.R_PCREL
r.Add += int64(r.Siz)
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ld.Linklookup(ctxt, ".plt", 0)
r.Add += int64(targ.Plt)
}
return
case 256 + ld.R_390_COPY:
ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
case 256 + ld.R_390_GLOB_DAT:
ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
case 256 + ld.R_390_JMP_SLOT:
ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
case 256 + ld.R_390_RELATIVE:
ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
case 256 + ld.R_390_GOTOFF:
if targ.Type == obj.SDYNIMPORT {
ctxt.Diag("unexpected R_390_GOTOFF relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_GOTOFF
return
case 256 + ld.R_390_GOTPC:
r.Type = obj.R_PCREL
r.Sym = ld.Linklookup(ctxt, ".got", 0)
r.Add += int64(r.Siz)
return
case 256 + ld.R_390_PC16DBL,
256 + ld.R_390_PC32DBL:
r.Type = obj.R_PCREL
r.Variant = ld.RV_390_DBL
r.Add += int64(r.Siz)
if targ.Type == obj.SDYNIMPORT {
ctxt.Diag("unexpected R_390_PCnnDBL relocation for dynamic symbol %s", targ.Name)
}
return
case 256 + ld.R_390_GOTPCDBL:
r.Type = obj.R_PCREL
r.Variant = ld.RV_390_DBL
r.Sym = ld.Linklookup(ctxt, ".got", 0)
r.Add += int64(r.Siz)
return
case 256 + ld.R_390_GOTENT:
addgotsym(ctxt, targ)
r.Type = obj.R_PCREL
r.Variant = ld.RV_390_DBL
r.Sym = ld.Linklookup(ctxt, ".got", 0)
r.Add += int64(targ.Got)
r.Add += int64(r.Siz)
return
}
// Handle references to ELF symbols from our own object files.
if targ.Type != obj.SDYNIMPORT {
return
}
ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) bool {
targ := r.Sym
switch r.Type {
default:
if r.Type >= 256 {
ld.Errorf(s, "unexpected relocation type %d", r.Type)
return false
}
// Handle relocations found in ELF object files.
case 256 + ld.R_X86_64_PC32:
if targ.Type == obj.SDYNIMPORT {
ld.Errorf(s, "unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
}
if targ.Type == 0 || targ.Type == obj.SXREF {
ld.Errorf(s, "unknown symbol %s in pcrel", targ.Name)
}
r.Type = obj.R_PCREL
r.Add += 4
return true
case 256 + ld.R_X86_64_PLT32:
r.Type = obj.R_PCREL
r.Add += 4
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ctxt.Syms.Lookup(".plt", 0)
r.Add += int64(targ.Plt)
}
return true
case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
if targ.Type != obj.SDYNIMPORT {
// have symbol
if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
// turn MOVQ of GOT entry into LEAQ of symbol itself
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
r.Add += 4
return true
}
}
// fall back to using GOT and hope for the best (CMOV*)
// TODO: just needs relocation, no need to put in .dynsym
addgotsym(ctxt, targ)
r.Type = obj.R_PCREL
r.Sym = ctxt.Syms.Lookup(".got", 0)
r.Add += 4
r.Add += int64(targ.Got)
return true
case 256 + ld.R_X86_64_64:
if targ.Type == obj.SDYNIMPORT {
ld.Errorf(s, "unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
}
r.Type = obj.R_ADDR
return true
// Handle relocations found in Mach-O object files.
case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
// TODO: What is the difference between all these?
r.Type = obj.R_ADDR
if targ.Type == obj.SDYNIMPORT {
ld.Errorf(s, "unexpected reloc for dynamic symbol %s", targ.Name)
}
return true
case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
if targ.Type == obj.SDYNIMPORT {
addpltsym(ctxt, targ)
r.Sym = ctxt.Syms.Lookup(".plt", 0)
r.Add = int64(targ.Plt)
r.Type = obj.R_PCREL
return true
}
fallthrough
// fall through
case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
r.Type = obj.R_PCREL
if targ.Type == obj.SDYNIMPORT {
ld.Errorf(s, "unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
}
return true
case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
if targ.Type != obj.SDYNIMPORT {
// have symbol
// turn MOVQ of GOT entry into LEAQ of symbol itself
if r.Off < 2 || s.P[r.Off-2] != 0x8b {
ld.Errorf(s, "unexpected GOT_LOAD reloc for non-dynamic symbol %s", targ.Name)
return false
}
s.P[r.Off-2] = 0x8d
r.Type = obj.R_PCREL
return true
}
fallthrough
// fall through
case 512 + ld.MACHO_X86_64_RELOC_GOT*2 + 1:
if targ.Type != obj.SDYNIMPORT {
ld.Errorf(s, "unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
}
addgotsym(ctxt, targ)
r.Type = obj.R_PCREL
r.Sym = ctxt.Syms.Lookup(".got", 0)
r.Add += int64(targ.Got)
return true
}
switch r.Type {
case obj.R_CALL,
obj.R_PCREL:
if targ.Type != obj.SDYNIMPORT {
// nothing to do, the relocation will be laid out in reloc
return true
}
if ld.Headtype == obj.Hwindows || ld.Headtype == obj.Hwindowsgui {
// nothing to do, the relocation will be laid out in pereloc1
return true
} else {
// for both ELF and Mach-O
addpltsym(ctxt, targ)
r.Sym = ctxt.Syms.Lookup(".plt", 0)
r.Add = int64(targ.Plt)
return true
}
case obj.R_ADDR:
if s.Type == obj.STEXT && ld.Iself {
if ld.Headtype == obj.Hsolaris {
addpltsym(ctxt, targ)
r.Sym = ctxt.Syms.Lookup(".plt", 0)
r.Add += int64(targ.Plt)
return true
}
// The code is asking for the address of an external
// function. We provide it with the address of the
// correspondent GOT symbol.
addgotsym(ctxt, targ)
r.Sym = ctxt.Syms.Lookup(".got", 0)
r.Add += int64(targ.Got)
return true
}
// Process dynamic relocations for the data sections.
if ld.Buildmode == ld.BuildmodePIE && ld.Linkmode == ld.LinkInternal {
// When internally linking, generate dynamic relocations
// for all typical R_ADDR relocations. The exception
// are those R_ADDR that are created as part of generating
// the dynamic relocations and must be resolved statically.
//
// There are three phases relevant to understanding this:
//
// dodata() // we are here
// address() // symbol address assignment
// reloc() // resolution of static R_ADDR relocs
//
// At this point symbol addresses have not been
// assigned yet (as the final size of the .rela section
// will affect the addresses), and so we cannot write
// the Elf64_Rela.r_offset now. Instead we delay it
// until after the 'address' phase of the linker is
// complete. We do this via Addaddrplus, which creates
// a new R_ADDR relocation which will be resolved in
// the 'reloc' phase.
//
// These synthetic static R_ADDR relocs must be skipped
// now, or else we will be caught in an infinite loop
// of generating synthetic relocs for our synthetic
// relocs.
switch s.Name {
case ".dynsym", ".rela", ".got.plt", ".dynamic":
return false
}
} else {
// Either internally linking a static executable,
// in which case we can resolve these relocations
// statically in the 'reloc' phase, or externally
// linking, in which case the relocation will be
// prepared in the 'reloc' phase and passed to the
// external linker in the 'asmb' phase.
if s.Type != obj.SDATA && s.Type != obj.SRODATA {
break
}
}
if ld.Iself {
// TODO: We generate a R_X86_64_64 relocation for every R_ADDR, even
// though it would be more efficient (for the dynamic linker) if we
// generated R_X86_RELATIVE instead.
ld.Adddynsym(ctxt, targ)
rela := ctxt.Syms.Lookup(".rela", 0)
ld.Addaddrplus(ctxt, rela, s, int64(r.Off))
if r.Siz == 8 {
ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_64))
} else {
// TODO: never happens, remove.
ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_32))
}
ld.Adduint64(ctxt, rela, uint64(r.Add))
r.Type = 256 // ignore during relocsym
return true
}
if ld.Headtype == obj.Hdarwin && s.Size == int64(ld.SysArch.PtrSize) && r.Off == 0 {
// Mach-O relocations are a royal pain to lay out.
// They use a compact stateful bytecode representation
// that is too much bother to deal with.
// Instead, interpret the C declaration
// void *_Cvar_stderr = &stderr;
// as making _Cvar_stderr the name of a GOT entry
// for stderr. This is separate from the usual GOT entry,
// just in case the C code assigns to the variable,
// and of course it only works for single pointers,
// but we only need to support cgo and that's all it needs.
ld.Adddynsym(ctxt, targ)
got := ctxt.Syms.Lookup(".got", 0)
s.Type = got.Type | obj.SSUB
s.Outer = got
s.Sub = got.Sub
got.Sub = s
s.Value = got.Size
ld.Adduint64(ctxt, got, 0)
ld.Adduint32(ctxt, ctxt.Syms.Lookup(".linkedit.got", 0), uint32(targ.Dynid))
r.Type = 256 // ignore during relocsym
return true
}
if ld.Headtype == obj.Hwindows || ld.Headtype == obj.Hwindowsgui {
// nothing to do, the relocation will be laid out in pereloc1
return true
}
}
return false
}
