func intLiteral(n *gc.Node) (x int64, ok bool) {
switch {
case n == nil:
return
case gc.Isconst(n, gc.CTINT):
return n.Int(), true
case gc.Isconst(n, gc.CTBOOL):
return int64(obj.Bool2int(n.Bool())), true
}
return
}
func ginscmp(op int, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
if gc.Isint[t.Etype] && n1.Op == gc.OLITERAL && n2.Op != gc.OLITERAL {
// Reverse comparison to place constant last.
op = gc.Brrev(op)
n1, n2 = n2, n1
}
var r1, r2, g1, g2 gc.Node
gc.Regalloc(&r1, t, n1)
gc.Regalloc(&g1, n1.Type, &r1)
gc.Cgen(n1, &g1)
gmove(&g1, &r1)
if gc.Isint[t.Etype] && gc.Isconst(n2, gc.CTINT) {
ginscon2(optoas(gc.OCMP, t), &r1, n2.Int())
} else {
gc.Regalloc(&r2, t, n2)
gc.Regalloc(&g2, n1.Type, &r2)
gc.Cgen(n2, &g2)
gmove(&g2, &r2)
gcmp(optoas(gc.OCMP, t), &r1, &r2)
gc.Regfree(&g2)
gc.Regfree(&r2)
}
gc.Regfree(&g1)
gc.Regfree(&r1)
return gc.Gbranch(optoas(op, t), nil, likely)
}
/*
* generate division.
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will generate undefined result.
// Also need to explicitly trap on division on zero,
// the hardware will silently generate undefined result.
// DIVW will leave unpredicable result in higher 32-bit,
// so always use DIVD/DIVDU.
t := nl.Type
t0 := t
check := 0
if gc.Issigned[t.Etype] {
check = 1
if gc.Isconst(nl, gc.CTINT) && nl.Int() != -(1<<uint64(t.Width*8-1)) {
check = 0
} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
check = 0
}
}
if t.Width < 8 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT64]
} else {
t = gc.Types[gc.TUINT64]
}
check = 0
}
a := optoas(gc.ODIV, t)
var tl gc.Node
gc.Regalloc(&tl, t0, nil)
var tr gc.Node
gc.Regalloc(&tr, t0, nil)
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &tl)
gc.Cgen(nr, &tr)
} else {
gc.Cgen(nr, &tr)
gc.Cgen(nl, &tl)
}
if t != t0 {
// Convert
tl2 := tl
tr2 := tr
tl.Type = t
tr.Type = t
gmove(&tl2, &tl)
gmove(&tr2, &tr)
}
// Handle divide-by-zero panic.
p1 := gins(optoas(gc.OCMP, t), &tr, nil)
p1.To.Type = obj.TYPE_REG
p1.To.Reg = ppc64.REGZERO
p1 = gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
var p2 *obj.Prog
if check != 0 {
var nm1 gc.Node
gc.Nodconst(&nm1, t, -1)
gins(optoas(gc.OCMP, t), &tr, &nm1)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, &tl)
gmove(&tl, res)
} else {
// a % (-1) is 0.
var nz gc.Node
gc.Nodconst(&nz, t, 0)
gmove(&nz, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
p1 = gins(a, &tr, &tl)
if op == gc.ODIV {
gc.Regfree(&tr)
gmove(&tl, res)
} else {
// A%B = A-(A/B*B)
var tm gc.Node
gc.Regalloc(&tm, t, nil)
// patch div to use the 3 register form
// TODO(minux): add gins3?
p1.Reg = p1.To.Reg
p1.To.Reg = tm.Reg
gins(optoas(gc.OMUL, t), &tr, &tm)
gc.Regfree(&tr)
gins(optoas(gc.OSUB, t), &tm, &tl)
gc.Regfree(&tm)
gmove(&tl, res)
}
gc.Regfree(&tl)
if check != 0 {
gc.Patch(p2, gc.Pc)
}
}
/*
* generate division.
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will trap.
// Also the byte divide instruction needs AH,
// which we otherwise don't have to deal with.
// Easiest way to avoid for int8, int16: use int32.
// For int32 and int64, use explicit test.
// Could use int64 hw for int32.
t := nl.Type
t0 := t
check := 0
if gc.Issigned[t.Etype] {
check = 1
if gc.Isconst(nl, gc.CTINT) && nl.Int() != -(1<<uint64(t.Width*8-1)) {
check = 0
} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
check = 0
}
}
if t.Width < 4 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT32]
} else {
t = gc.Types[gc.TUINT32]
}
check = 0
}
a := optoas(op, t)
var n3 gc.Node
gc.Regalloc(&n3, t0, nil)
var ax gc.Node
var oldax gc.Node
if nl.Ullman >= nr.Ullman {
savex(x86.REG_AX, &ax, &oldax, res, t0)
gc.Cgen(nl, &ax)
gc.Regalloc(&ax, t0, &ax) // mark ax live during cgen
gc.Cgen(nr, &n3)
gc.Regfree(&ax)
} else {
gc.Cgen(nr, &n3)
savex(x86.REG_AX, &ax, &oldax, res, t0)
gc.Cgen(nl, &ax)
}
if t != t0 {
// Convert
ax1 := ax
n31 := n3
ax.Type = t
n3.Type = t
gmove(&ax1, &ax)
gmove(&n31, &n3)
}
var n4 gc.Node
if gc.Nacl {
// Native Client does not relay the divide-by-zero trap
// to the executing program, so we must insert a check
// for ourselves.
gc.Nodconst(&n4, t, 0)
gins(optoas(gc.OCMP, t), &n3, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
}
var p2 *obj.Prog
if check != 0 {
gc.Nodconst(&n4, t, -1)
gins(optoas(gc.OCMP, t), &n3, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, &ax)
gmove(&ax, res)
} else {
// a % (-1) is 0.
gc.Nodconst(&n4, t, 0)
gmove(&n4, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
var olddx gc.Node
var dx gc.Node
savex(x86.REG_DX, &dx, &olddx, res, t)
if !gc.Issigned[t.Etype] {
gc.Nodconst(&n4, t, 0)
gmove(&n4, &dx)
} else {
gins(optoas(gc.OEXTEND, t), nil, nil)
}
gins(a, &n3, nil)
gc.Regfree(&n3)
if op == gc.ODIV {
gmove(&ax, res)
} else {
gmove(&dx, res)
}
restx(&dx, &olddx)
if check != 0 {
gc.Patch(p2, gc.Pc)
}
restx(&ax, &oldax)
}
/*
* generate one instruction:
* as f, t
*/
func gins(as int, f *gc.Node, t *gc.Node) *obj.Prog {
if as == x86.AFMOVF && f != nil && f.Op == gc.OREGISTER && t != nil && t.Op == gc.OREGISTER {
gc.Fatalf("gins MOVF reg, reg")
}
if as == x86.ACVTSD2SS && f != nil && f.Op == gc.OLITERAL {
gc.Fatalf("gins CVTSD2SS const")
}
if as == x86.AMOVSD && t != nil && t.Op == gc.OREGISTER && t.Reg == x86.REG_F0 {
gc.Fatalf("gins MOVSD into F0")
}
if as == x86.AMOVL && f != nil && f.Op == gc.OADDR && f.Left.Op == gc.ONAME && f.Left.Class != gc.PEXTERN && f.Left.Class != gc.PFUNC {
// Turn MOVL $xxx(FP/SP) into LEAL xxx.
// These should be equivalent but most of the backend
// only expects to see LEAL, because that's what we had
// historically generated. Various hidden assumptions are baked in by now.
as = x86.ALEAL
f = f.Left
}
switch as {
case x86.AMOVB,
x86.AMOVW,
x86.AMOVL:
if f != nil && t != nil && samaddr(f, t) {
return nil
}
case x86.ALEAL:
if f != nil && gc.Isconst(f, gc.CTNIL) {
gc.Fatalf("gins LEAL nil %v", f.Type)
}
}
p := gc.Prog(as)
gc.Naddr(&p.From, f)
gc.Naddr(&p.To, t)
if gc.Debug['g'] != 0 {
fmt.Printf("%v\n", p)
}
w := 0
switch as {
case x86.AMOVB:
w = 1
case x86.AMOVW:
w = 2
case x86.AMOVL:
w = 4
}
if true && w != 0 && f != nil && (p.From.Width > int64(w) || p.To.Width > int64(w)) {
gc.Dump("bad width from:", f)
gc.Dump("bad width to:", t)
gc.Fatalf("bad width: %v (%d, %d)\n", p, p.From.Width, p.To.Width)
}
if p.To.Type == obj.TYPE_ADDR && w > 0 {
gc.Fatalf("bad use of addr: %v", p)
}
return p
}
/*
* generate division.
* caller must set:
* ax = allocated AX register
* dx = allocated DX register
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node, ax *gc.Node, dx *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will trap.
// Also the byte divide instruction needs AH,
// which we otherwise don't have to deal with.
// Easiest way to avoid for int8, int16: use int32.
// For int32 and int64, use explicit test.
// Could use int64 hw for int32.
t := nl.Type
t0 := t
check := false
if gc.Issigned[t.Etype] {
check = true
if gc.Isconst(nl, gc.CTINT) && nl.Int() != -1<<uint64(t.Width*8-1) {
check = false
} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
check = false
}
}
if t.Width < 4 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT32]
} else {
t = gc.Types[gc.TUINT32]
}
check = false
}
var t1 gc.Node
gc.Tempname(&t1, t)
var t2 gc.Node
gc.Tempname(&t2, t)
if t0 != t {
var t3 gc.Node
gc.Tempname(&t3, t0)
var t4 gc.Node
gc.Tempname(&t4, t0)
gc.Cgen(nl, &t3)
gc.Cgen(nr, &t4)
// Convert.
gmove(&t3, &t1)
gmove(&t4, &t2)
} else {
gc.Cgen(nl, &t1)
gc.Cgen(nr, &t2)
}
var n1 gc.Node
if !gc.Samereg(ax, res) && !gc.Samereg(dx, res) {
gc.Regalloc(&n1, t, res)
} else {
gc.Regalloc(&n1, t, nil)
}
gmove(&t2, &n1)
gmove(&t1, ax)
var p2 *obj.Prog
var n4 gc.Node
if gc.Nacl {
// Native Client does not relay the divide-by-zero trap
// to the executing program, so we must insert a check
// for ourselves.
gc.Nodconst(&n4, t, 0)
gins(optoas(gc.OCMP, t), &n1, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
}
if check {
gc.Nodconst(&n4, t, -1)
gins(optoas(gc.OCMP, t), &n1, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, ax)
gmove(ax, res)
} else {
// a % (-1) is 0.
gc.Nodconst(&n4, t, 0)
gmove(&n4, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
if !gc.Issigned[t.Etype] {
var nz gc.Node
gc.Nodconst(&nz, t, 0)
gmove(&nz, dx)
} else {
gins(optoas(gc.OEXTEND, t), nil, nil)
}
gins(optoas(op, t), &n1, nil)
gc.Regfree(&n1)
if op == gc.ODIV {
gmove(ax, res)
} else {
gmove(dx, res)
}
if check {
gc.Patch(p2, gc.Pc)
}
}
/*
* generate code to compute address of n,
* a reference to a (perhaps nested) field inside
* an array or struct.
* return 0 on failure, 1 on success.
* on success, leaves usable address in a.
*
* caller is responsible for calling sudoclean
* after successful sudoaddable,
* to release the register used for a.
*/
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
if n.Type == nil {
return false
}
*a = obj.Addr{}
switch n.Op {
case gc.OLITERAL:
if !gc.Isconst(n, gc.CTINT) {
break
}
v := n.Int()
if v >= 32000 || v <= -32000 {
break
}
switch as {
default:
return false
case arm.AADD,
arm.ASUB,
arm.AAND,
arm.AORR,
arm.AEOR,
arm.AMOVB,
arm.AMOVBS,
arm.AMOVBU,
arm.AMOVH,
arm.AMOVHS,
arm.AMOVHU,
arm.AMOVW:
break
}
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
gc.Naddr(a, n)
return true
case gc.ODOT,
gc.ODOTPTR:
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
var nn *gc.Node
var oary [10]int64
o := gc.Dotoffset(n, oary[:], &nn)
if nn == nil {
sudoclean()
return false
}
if nn.Addable && o == 1 && oary[0] >= 0 {
// directly addressable set of DOTs
n1 := *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
gc.Naddr(a, &n1)
return true
}
gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
n1 := *reg
n1.Op = gc.OINDREG
if oary[0] >= 0 {
gc.Agen(nn, reg)
n1.Xoffset = oary[0]
} else {
gc.Cgen(nn, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[0] + 1)
}
for i := 1; i < o; i++ {
if oary[i] >= 0 {
gc.Fatal("can't happen")
}
gins(arm.AMOVW, &n1, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[i] + 1)
}
a.Type = obj.TYPE_NONE
a.Name = obj.NAME_NONE
n1.Type = n.Type
gc.Naddr(a, &n1)
return true
case gc.OINDEX:
return false
}
return false
}
/*
* generate one instruction:
* as f, t
*/
func gins(as int, f *gc.Node, t *gc.Node) *obj.Prog {
// Node nod;
// if(f != N && f->op == OINDEX) {
// gc.Regalloc(&nod, ®node, Z);
// v = constnode.vconst;
// gc.Cgen(f->right, &nod);
// constnode.vconst = v;
// idx.reg = nod.reg;
// gc.Regfree(&nod);
// }
// if(t != N && t->op == OINDEX) {
// gc.Regalloc(&nod, ®node, Z);
// v = constnode.vconst;
// gc.Cgen(t->right, &nod);
// constnode.vconst = v;
// idx.reg = nod.reg;
// gc.Regfree(&nod);
// }
if f != nil && f.Op == gc.OADDR && (as == x86.AMOVL || as == x86.AMOVQ) {
// Turn MOVL $xxx into LEAL xxx.
// These should be equivalent but most of the backend
// only expects to see LEAL, because that's what we had
// historically generated. Various hidden assumptions are baked in by now.
if as == x86.AMOVL {
as = x86.ALEAL
} else {
as = x86.ALEAQ
}
f = f.Left
}
switch as {
case x86.AMOVB,
x86.AMOVW,
x86.AMOVL,
x86.AMOVQ,
x86.AMOVSS,
x86.AMOVSD:
if f != nil && t != nil && samaddr(f, t) {
return nil
}
case x86.ALEAQ:
if f != nil && gc.Isconst(f, gc.CTNIL) {
gc.Fatal("gins LEAQ nil %v", f.Type)
}
}
p := gc.Prog(as)
gc.Naddr(&p.From, f)
gc.Naddr(&p.To, t)
if gc.Debug['g'] != 0 {
fmt.Printf("%v\n", p)
}
w := int32(0)
switch as {
case x86.AMOVB:
w = 1
case x86.AMOVW:
w = 2
case x86.AMOVL:
w = 4
case x86.AMOVQ:
w = 8
}
if w != 0 && ((f != nil && p.From.Width < int64(w)) || (t != nil && p.To.Width > int64(w))) {
gc.Dump("f", f)
gc.Dump("t", t)
gc.Fatal("bad width: %v (%d, %d)\n", p, p.From.Width, p.To.Width)
}
if p.To.Type == obj.TYPE_ADDR && w > 0 {
gc.Fatal("bad use of addr: %v", p)
}
return p
}
/*
* generate code to compute address of n,
* a reference to a (perhaps nested) field inside
* an array or struct.
* return 0 on failure, 1 on success.
* on success, leaves usable address in a.
*
* caller is responsible for calling sudoclean
* after successful sudoaddable,
* to release the register used for a.
*/
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
if n.Type == nil {
return false
}
*a = obj.Addr{}
switch n.Op {
case gc.OLITERAL:
if !gc.Isconst(n, gc.CTINT) {
break
}
v := n.Int()
if v >= 32000 || v <= -32000 {
break
}
switch as {
default:
return false
case x86.AADDB,
x86.AADDW,
x86.AADDL,
x86.AADDQ,
x86.ASUBB,
x86.ASUBW,
x86.ASUBL,
x86.ASUBQ,
x86.AANDB,
x86.AANDW,
x86.AANDL,
x86.AANDQ,
x86.AORB,
x86.AORW,
x86.AORL,
x86.AORQ,
x86.AXORB,
x86.AXORW,
x86.AXORL,
x86.AXORQ,
x86.AINCB,
x86.AINCW,
x86.AINCL,
x86.AINCQ,
x86.ADECB,
x86.ADECW,
x86.ADECL,
x86.ADECQ,
x86.AMOVB,
x86.AMOVW,
x86.AMOVL,
x86.AMOVQ:
break
}
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
gc.Naddr(a, n)
return true
case gc.ODOT,
gc.ODOTPTR:
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
var nn *gc.Node
var oary [10]int64
o := gc.Dotoffset(n, oary[:], &nn)
if nn == nil {
sudoclean()
return false
}
if nn.Addable && o == 1 && oary[0] >= 0 {
// directly addressable set of DOTs
n1 := *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
gc.Naddr(a, &n1)
return true
}
gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
n1 := *reg
n1.Op = gc.OINDREG
if oary[0] >= 0 {
gc.Agen(nn, reg)
n1.Xoffset = oary[0]
} else {
gc.Cgen(nn, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[0] + 1)
}
for i := 1; i < o; i++ {
if oary[i] >= 0 {
gc.Fatal("can't happen")
}
gins(movptr, &n1, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[i] + 1)
}
a.Type = obj.TYPE_NONE
a.Index = obj.TYPE_NONE
gc.Fixlargeoffset(&n1)
gc.Naddr(a, &n1)
return true
case gc.OINDEX:
return false
}
return false
}
/*
* generate code to compute address of n,
* a reference to a (perhaps nested) field inside
* an array or struct.
* return 0 on failure, 1 on success.
* on success, leaves usable address in a.
*
* caller is responsible for calling sudoclean
* after successful sudoaddable,
* to release the register used for a.
*/
func sudoaddable(as obj.As, n *gc.Node, a *obj.Addr) bool {
if n.Type == nil {
return false
}
*a = obj.Addr{}
switch n.Op {
case gc.OLITERAL:
if !gc.Isconst(n, gc.CTINT) {
return false
}
v := n.Int64()
switch as {
default:
return false
// operations that can cope with a 32-bit immediate
// TODO(mundaym): logical operations can work on high bits
case s390x.AADD,
s390x.AADDC,
s390x.ASUB,
s390x.AMULLW,
s390x.AAND,
s390x.AOR,
s390x.AXOR,
s390x.ASLD,
s390x.ASLW,
s390x.ASRAW,
s390x.ASRAD,
s390x.ASRW,
s390x.ASRD,
s390x.AMOVB,
s390x.AMOVBZ,
s390x.AMOVH,
s390x.AMOVHZ,
s390x.AMOVW,
s390x.AMOVWZ,
s390x.AMOVD:
if int64(int32(v)) != v {
return false
}
// for comparisons avoid immediates unless they can
// fit into a int8/uint8
// this favours combined compare and branch instructions
case s390x.ACMP:
if int64(int8(v)) != v {
return false
}
case s390x.ACMPU:
if int64(uint8(v)) != v {
return false
}
}
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
gc.Naddr(a, n)
return true
case gc.ODOT,
gc.ODOTPTR:
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
var nn *gc.Node
var oary [10]int64
o := gc.Dotoffset(n, oary[:], &nn)
if nn == nil {
sudoclean()
return false
}
if nn.Addable && o == 1 && oary[0] >= 0 {
// directly addressable set of DOTs
n1 := *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
// check that the offset fits into a 12-bit displacement
if n1.Xoffset < 0 || n1.Xoffset >= (1<<12)-8 {
sudoclean()
return false
}
gc.Naddr(a, &n1)
return true
}
gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
n1 := *reg
n1.Op = gc.OINDREG
if oary[0] >= 0 {
gc.Agen(nn, reg)
n1.Xoffset = oary[0]
} else {
gc.Cgen(nn, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[0] + 1)
}
for i := 1; i < o; i++ {
if oary[i] >= 0 {
gc.Fatalf("can't happen")
}
gins(s390x.AMOVD, &n1, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[i] + 1)
}
a.Type = obj.TYPE_NONE
a.Index = 0
// check that the offset fits into a 12-bit displacement
if n1.Xoffset < 0 || n1.Xoffset >= (1<<12)-8 {
tmp := n1
tmp.Op = gc.OREGISTER
tmp.Type = gc.Types[gc.Tptr]
tmp.Xoffset = 0
gc.Cgen_checknil(&tmp)
ginscon(s390x.AADD, n1.Xoffset, &tmp)
n1.Xoffset = 0
}
gc.Naddr(a, &n1)
return true
}
return false
}