func (b *buildFile) run(c *Container) error {
var errCh chan error
if b.verbose {
errCh = utils.Go(func() error {
// FIXME: call the 'attach' job so that daemon.Attach can be made private
//
// FIXME (LK4D4): Also, maybe makes sense to call "logs" job, it is like attach
// but without hijacking for stdin. Also, with attach there can be race
// condition because of some output already was printed before it.
return <-b.daemon.Attach(c, nil, nil, b.outStream, b.errStream)
})
}
//start the container
if err := c.Start(); err != nil {
return err
}
if errCh != nil {
if err := <-errCh; err != nil {
return err
}
}
// Wait for it to finish
if ret, _ := c.State.WaitStop(-1 * time.Second); ret != 0 {
err := &utils.JSONError{
Message: fmt.Sprintf("The command %v returned a non-zero code: %d", b.config.Cmd, ret),
Code: ret,
}
return err
}
return nil
}
func (container *Container) waitForStart() error {
container.monitor = newContainerMonitor(container, container.hostConfig.RestartPolicy)
// block until we either receive an error from the initial start of the container's
// process or until the process is running in the container
select {
case <-container.monitor.startSignal:
case err := <-utils.Go(container.monitor.Start):
return err
}
return nil
}
// CopyFileWithTar emulates the behavior of the 'cp' command-line
// for a single file. It copies a regular file from path `src` to
// path `dst`, and preserves all its metadata.
//
// If `dst` ends with a trailing slash '/', the final destination path
// will be `dst/base(src)`.
func CopyFileWithTar(src, dst string) (err error) {
log.Debugf("CopyFileWithTar(%s, %s)", src, dst)
srcSt, err := os.Stat(src)
if err != nil {
return err
}
if srcSt.IsDir() {
return fmt.Errorf("Can't copy a directory")
}
// Clean up the trailing /
if dst[len(dst)-1] == '/' {
dst = path.Join(dst, filepath.Base(src))
}
// Create the holding directory if necessary
if err := os.MkdirAll(filepath.Dir(dst), 0700); err != nil && !os.IsExist(err) {
return err
}
r, w := io.Pipe()
errC := utils.Go(func() error {
defer w.Close()
srcF, err := os.Open(src)
if err != nil {
return err
}
defer srcF.Close()
hdr, err := tar.FileInfoHeader(srcSt, "")
if err != nil {
return err
}
hdr.Name = filepath.Base(dst)
tw := tar.NewWriter(w)
defer tw.Close()
if err := tw.WriteHeader(hdr); err != nil {
return err
}
if _, err := io.Copy(tw, srcF); err != nil {
return err
}
return nil
})
defer func() {
if er := <-errC; err != nil {
err = er
}
}()
return Untar(r, filepath.Dir(dst), nil)
}
func (cli *DockerCli) hijack(method, path string, setRawTerminal bool, in io.ReadCloser, stdout, stderr io.Writer, started chan io.Closer) error {
defer func() {
if started != nil {
close(started)
}
}()
req, err := http.NewRequest(method, fmt.Sprintf("/v%s%s", api.APIVERSION, path), nil)
if err != nil {
return err
}
req.Header.Set("User-Agent", "Docker-Client/"+dockerversion.VERSION)
req.Header.Set("Content-Type", "plain/text")
req.Host = cli.addr
dial, err := cli.dial()
if err != nil {
if strings.Contains(err.Error(), "connection refused") {
return fmt.Errorf("Cannot connect to the Docker daemon. Is 'docker -d' running on this host?")
}
return err
}
clientconn := httputil.NewClientConn(dial, nil)
defer clientconn.Close()
// Server hijacks the connection, error 'connection closed' expected
clientconn.Do(req)
rwc, br := clientconn.Hijack()
defer rwc.Close()
if started != nil {
started <- rwc
}
var receiveStdout chan error
var oldState *term.State
if in != nil && setRawTerminal && cli.isTerminal && os.Getenv("NORAW") == "" {
oldState, err = term.SetRawTerminal(cli.terminalFd)
if err != nil {
return err
}
defer term.RestoreTerminal(cli.terminalFd, oldState)
}
if stdout != nil || stderr != nil {
receiveStdout = utils.Go(func() (err error) {
defer func() {
if in != nil {
if setRawTerminal && cli.isTerminal {
term.RestoreTerminal(cli.terminalFd, oldState)
}
// For some reason this Close call blocks on darwin..
// As the client exists right after, simply discard the close
// until we find a better solution.
if runtime.GOOS != "darwin" {
in.Close()
}
}
}()
// When TTY is ON, use regular copy
if setRawTerminal && stdout != nil {
_, err = io.Copy(stdout, br)
} else {
_, err = utils.StdCopy(stdout, stderr, br)
}
log.Debugf("[hijack] End of stdout")
return err
})
}
sendStdin := utils.Go(func() error {
if in != nil {
io.Copy(rwc, in)
log.Debugf("[hijack] End of stdin")
}
if tcpc, ok := rwc.(*net.TCPConn); ok {
if err := tcpc.CloseWrite(); err != nil {
log.Debugf("Couldn't send EOF: %s", err)
}
} else if unixc, ok := rwc.(*net.UnixConn); ok {
if err := unixc.CloseWrite(); err != nil {
log.Debugf("Couldn't send EOF: %s", err)
}
}
// Discard errors due to pipe interruption
return nil
})
if stdout != nil || stderr != nil {
if err := <-receiveStdout; err != nil {
log.Debugf("Error receiveStdout: %s", err)
return err
}
}
if !cli.isTerminal {
if err := <-sendStdin; err != nil {
log.Debugf("Error sendStdin: %s", err)
return err
}
}
return nil
}
// FIXME: this should be private, and every outside subsystem
// should go through the "container_attach" job. But that would require
// that job to be properly documented, as well as the relationship betweem
// Attach and ContainerAttach.
//
// This method is in use by builder/builder.go.
func (daemon *Daemon) Attach(container *Container, stdin io.ReadCloser, stdinCloser io.Closer, stdout io.Writer, stderr io.Writer) chan error {
var (
cStdout, cStderr io.ReadCloser
nJobs int
errors = make(chan error, 3)
)
if stdin != nil && container.Config.OpenStdin {
nJobs += 1
if cStdin, err := container.StdinPipe(); err != nil {
errors <- err
} else {
go func() {
log.Debugf("attach: stdin: begin")
defer log.Debugf("attach: stdin: end")
// No matter what, when stdin is closed (io.Copy unblock), close stdout and stderr
if container.Config.StdinOnce && !container.Config.Tty {
defer cStdin.Close()
} else {
defer func() {
if cStdout != nil {
cStdout.Close()
}
if cStderr != nil {
cStderr.Close()
}
}()
}
if container.Config.Tty {
_, err = utils.CopyEscapable(cStdin, stdin)
} else {
_, err = io.Copy(cStdin, stdin)
}
if err == io.ErrClosedPipe {
err = nil
}
if err != nil {
log.Errorf("attach: stdin: %s", err)
}
errors <- err
}()
}
}
if stdout != nil {
nJobs += 1
if p, err := container.StdoutPipe(); err != nil {
errors <- err
} else {
cStdout = p
go func() {
log.Debugf("attach: stdout: begin")
defer log.Debugf("attach: stdout: end")
// If we are in StdinOnce mode, then close stdin
if container.Config.StdinOnce && stdin != nil {
defer stdin.Close()
}
if stdinCloser != nil {
defer stdinCloser.Close()
}
_, err := io.Copy(stdout, cStdout)
if err == io.ErrClosedPipe {
err = nil
}
if err != nil {
log.Errorf("attach: stdout: %s", err)
}
errors <- err
}()
}
} else {
go func() {
if stdinCloser != nil {
defer stdinCloser.Close()
}
if cStdout, err := container.StdoutPipe(); err != nil {
log.Errorf("attach: stdout pipe: %s", err)
} else {
io.Copy(&utils.NopWriter{}, cStdout)
}
}()
}
if stderr != nil {
nJobs += 1
if p, err := container.StderrPipe(); err != nil {
errors <- err
} else {
cStderr = p
go func() {
log.Debugf("attach: stderr: begin")
defer log.Debugf("attach: stderr: end")
// If we are in StdinOnce mode, then close stdin
if container.Config.StdinOnce && stdin != nil {
defer stdin.Close()
}
if stdinCloser != nil {
defer stdinCloser.Close()
}
_, err := io.Copy(stderr, cStderr)
if err == io.ErrClosedPipe {
err = nil
}
if err != nil {
log.Errorf("attach: stderr: %s", err)
}
errors <- err
}()
}
} else {
go func() {
if stdinCloser != nil {
defer stdinCloser.Close()
}
if cStderr, err := container.StderrPipe(); err != nil {
log.Errorf("attach: stdout pipe: %s", err)
} else {
io.Copy(&utils.NopWriter{}, cStderr)
}
}()
}
return utils.Go(func() error {
defer func() {
if cStdout != nil {
cStdout.Close()
}
if cStderr != nil {
cStderr.Close()
}
}()
// FIXME: how to clean up the stdin goroutine without the unwanted side effect
// of closing the passed stdin? Add an intermediary io.Pipe?
for i := 0; i < nJobs; i += 1 {
log.Debugf("attach: waiting for job %d/%d", i+1, nJobs)
if err := <-errors; err != nil {
log.Errorf("attach: job %d returned error %s, aborting all jobs", i+1, err)
return err
}
log.Debugf("attach: job %d completed successfully", i+1)
}
log.Debugf("attach: all jobs completed successfully")
return nil
})
}