func runZmqStream() {
var context zmq.Context
var socket zmq.Socket
// connect to zmq
var err error
if context, err = zmq.NewContext(); err != nil {
panic("No ZMQ Context?")
}
defer context.Close()
if socket, err = context.NewSocket(zmq.SUB); err != nil {
panic("No ZMQ Socket Outbound??")
}
defer socket.Close()
socket.Connect("tcp://localhost:5558")
socket.SetSockOptString(zmq.SUBSCRIBE, "")
for {
// block here, waiting for inbound requests
msg, _ := socket.Recv(0)
if len(msg) > 0 {
parts := strings.Split(string(msg), "\n\n")
process(parts[0])
}
}
}
func proxyRouting(status chan bool) {
// intialize the zmq context.
context, err := zmq.NewContext()
if err != nil {
status <- false
log.Fatal("Intialize the zeromq context failure.\n")
}
defer context.Close()
var subscriber, publisher *zmq.Socket
subscriber, err = context.NewSocket(zmq.XSUB)
if err != nil {
status <- false
log.Fatal("Intialize the subscriber failure.\n")
}
defer subscriber.Close()
var (
sub_address, pub_address = "*", "*"
subPort, pubPort = 6001, 6000
)
// Bind the subscriber
address := fmt.Sprintf("tcp://%s:%v", sub_address, subPort)
err = subscriber.Bind(address)
if err != nil {
status <- false
log.Fatalf("Subscriber bind on the address %s failure\n", address)
}
log.Printf("Subscriber bind on the address %s.\n", address)
publisher, err = context.NewSocket(zmq.XPUB)
if err != nil {
status <- false
log.Fatal("Intialize the publisher failure.\n")
}
defer publisher.Close()
// Bind the publisher
address = fmt.Sprintf("tcp://%s:%v", pub_address, pubPort)
err = publisher.Bind(address)
if err != nil {
status <- false
log.Fatalf("Publisher bind on the address %s failure.\n", address)
}
log.Printf("Publisher bind on the address %s.\n", address)
log.Println("Proxy successfully launched...")
// Poll the events on relevant sockets.
zmq.Proxy(subscriber, publisher, nil)
}
func (t *TransportZmq) bridge(bridge_in *zmq.Socket) {
var message interface{}
// Wait on channel, passing into socket
// This keeps the socket in a single thread, otherwise we have to lock the entire publisher
runtime.LockOSThread()
BridgeLoop:
for {
select {
case notify := <-t.bridge_chan:
bridge_in.Send(notify, 0)
// Shutdown?
if string(notify) == zmq_signal_shutdown {
break BridgeLoop
}
case message = <-t.recv_bridge_chan:
// The reason we flush recv through the bridge and not directly to recv_chan is so that if
// the poller was quick and had to cache a receive as the channel was full, it will stop
// polling - flushing through bridge allows us to signal poller to start polling again
// It is not the publisher's responsibility to do this, and TLS wouldn't need it
bridge_in.Send([]byte(zmq_signal_input), 0)
// Keep trying to forward on the message
ForwardLoop:
for {
select {
case notify := <-t.bridge_chan:
bridge_in.Send(notify, 0)
// Shutdown?
if string(notify) == zmq_signal_shutdown {
break BridgeLoop
}
case t.recv_chan <- message:
break ForwardLoop
}
}
}
}
// We should linger by default to ensure shutdown is transmitted
bridge_in.Close()
runtime.UnlockOSThread()
t.wait.Done()
}
func (t *TransportZmq) poller(bridge_out *zmq.Socket) {
// ZMQ sockets are not thread-safe, so we have to send/receive on same thread
// Thus, we cannot use a sender/receiver thread pair like we can with TLS so we use a single threaded poller instead
// In order to asynchronously send and receive we just poll and do necessary actions
// When data is ready to send we'll get a channel ping, that is bridged to ZMQ so we can then send data
// For receiving, we receive here and bridge it to the channels, then receive more once that's through
runtime.LockOSThread()
t.poll_items = make([]zmq.PollItem, 3)
t.poll_items[0].Socket = bridge_out
t.poll_items[0].Events = zmq.POLLIN | zmq.POLLOUT
t.poll_items[1].Socket = t.dealer
t.poll_items[1].Events = zmq.POLLIN | zmq.POLLOUT
t.poll_items[2].Socket = t.monitor
t.poll_items[2].Events = zmq.POLLIN
for {
// Poll for events
if _, err := zmq.Poll(t.poll_items, -1); err != nil {
// Retry on EINTR
if err == syscall.EINTR {
continue
}
// Failure
t.recv_chan <- fmt.Errorf("zmq.Poll failure %s", err)
break
}
// Process control channel
if t.poll_items[0].REvents&zmq.POLLIN != 0 {
if !t.processControlIn(bridge_out) {
break
}
}
// Process dealer send
if t.poll_items[1].REvents&zmq.POLLOUT != 0 {
if !t.processDealerOut() {
break
}
}
// Process dealer receive
if t.poll_items[1].REvents&zmq.POLLIN != 0 {
if !t.processDealerIn() {
break
}
}
// Process monitor receive
if t.poll_items[2].REvents&zmq.POLLIN != 0 {
if !t.processMonitorIn() {
break
}
}
}
bridge_out.Close()
runtime.UnlockOSThread()
t.wait.Done()
}
// the listen and server for mongrel, expects an address like this
// @addr = string config parameter like this:
// m2go.ListenAndServe("tcp://127.0.0.1:9555|tcp://127.0.0.1:9556|54c6755b-9628-40a4-9a2d-cc82a816345e", handler)
func ListenAndServe(addr string, handler http.Handler) {
var Context zmq.Context
var SocketIn zmq.Socket
var SocketOut zmq.Socket
var hasExited bool
var err error
m2addr := strings.Split(addr, "|") //
log.Printf("m2go serving %s\n", addr)
/*
Connection to ZMQ setup
*/
connect := func() {
if Context, err = zmq.NewContext(); err != nil {
panic("No ZMQ Context?")
}
// listen for incoming requests
if SocketIn, err = Context.NewSocket(zmq.PULL); err != nil {
panic("No ZMQ Socket?")
}
SocketIn.Connect(m2addr[0])
if SocketOut, err = Context.NewSocket(zmq.PUB); err != nil {
panic("No ZMQ Socket Outbound??")
}
// outbound response on a different channel
SocketOut.SetSockOptString(zmq.IDENTITY, m2addr[2])
//socket.SetSockOptString(zmq.SUBSCRIBE, filter)
SocketOut.Connect(m2addr[1])
}
connect()
handleResponse := func(response []byte) {
SocketOut.Send(response, 0)
}
stopper := func() {
if !hasExited {
hasExited = true
SocketOut.Close()
SocketIn.Close()
Context.Close()
}
}
defer stopper()
for {
// each inbound request
m2data, err := SocketIn.Recv(0)
//log.Println(string(m2data))
if err != nil {
log.Println("ZMQ Socket Input accept error ", err.Error())
} else {
go HandleM2Request(m2data, handleResponse, handler)
}
}
log.Print("after close of runner")
}
