コード例 #1
0
func (m *MessageRetriever) fetchIPFS(ctx commands.Context, pid peer.ID, addr ma.Multiaddr) {
	ciphertext, err := ipfs.Cat(ctx, addr.String())
	if err != nil {
		return
	}
	m.attemptDecrypt(ciphertext, pid)
}
コード例 #2
0
func (oas *ObservedAddrSet) Add(addr ma.Multiaddr, observer ma.Multiaddr) {
	oas.Lock()
	defer oas.Unlock()

	// for zero-value.
	if oas.addrs == nil {
		oas.addrs = make(map[string]*ObservedAddr)
		oas.ttl = peer.OwnObservedAddrTTL
	}

	s := addr.String()
	oa, found := oas.addrs[s]

	// first time seeing address.
	if !found {
		oa = &ObservedAddr{
			Addr:   addr,
			SeenBy: make(map[string]struct{}),
		}
		oas.addrs[s] = oa
	}

	// mark the observer
	oa.SeenBy[observerGroup(observer)] = struct{}{}
	oa.LastSeen = time.Now()
}
コード例 #3
0
// DialArgs is a convenience function returning arguments for use in net.Dial
func DialArgs(m ma.Multiaddr) (string, string, error) {
	if !IsThinWaist(m) {
		return "", "", fmt.Errorf("%s is not a 'thin waist' address", m)
	}

	str := m.String()
	parts := strings.Split(str, "/")[1:]

	if len(parts) == 2 { // only IP
		return parts[0], parts[1], nil
	}

	network := parts[2]
	if parts[2] == "udp" && len(parts) > 4 && parts[4] == "utp" {
		network = parts[4]
	}

	var host string
	switch parts[0] {
	case "ip4":
		network = network + "4"
		host = strings.Join([]string{parts[1], parts[3]}, ":")
	case "ip6":
		network = network + "6"
		host = fmt.Sprintf("[%s]:%s", parts[1], parts[3])
	}
	return network, host, nil
}
コード例 #4
0
// DialArgs is a convenience function returning arguments for use in net.Dial
func DialArgs(m ma.Multiaddr) (string, string, error) {
	// TODO: find a 'good' way to eliminate the function.
	// My preference is with a multiaddr.Format(...) function
	if !IsThinWaist(m) {
		return "", "", fmt.Errorf("%s is not a 'thin waist' address", m)
	}

	str := m.String()
	parts := strings.Split(str, "/")[1:]

	if len(parts) == 2 { // only IP
		return parts[0], parts[1], nil
	}

	network := parts[2]
	if parts[2] == "udp" && len(parts) > 4 && parts[4] == "utp" {
		network = parts[4]
	}

	var host string
	switch parts[0] {
	case "ip4":
		network = network + "4"
		host = strings.Join([]string{parts[1], parts[3]}, ":")
	case "ip6":
		network = network + "6"
		host = fmt.Sprintf("[%s]:%s", parts[1], parts[3])
	}
	return network, host, nil
}
コード例 #5
0
ファイル: tcp.go プロジェクト: ymonk/openbazaar-go
func (t *TcpTransport) Listen(laddr ma.Multiaddr) (Listener, error) {
	if !t.Matches(laddr) {
		return nil, fmt.Errorf("tcp transport cannot listen on %q", laddr)
	}

	t.llock.Lock()
	defer t.llock.Unlock()
	s := laddr.String()
	l, found := t.listeners[s]
	if found {
		return l, nil
	}

	list, err := manetListen(laddr)
	if err != nil {
		return nil, err
	}

	tlist := &tcpListener{
		list:      list,
		transport: t,
	}

	t.listeners[s] = tlist
	return tlist, nil
}
コード例 #6
0
ファイル: tcp.go プロジェクト: ymonk/openbazaar-go
func (t *TcpTransport) Dialer(laddr ma.Multiaddr, opts ...DialOpt) (Dialer, error) {
	t.dlock.Lock()
	defer t.dlock.Unlock()
	s := laddr.String()
	d, found := t.dialers[s]
	if found {
		return d, nil
	}
	var base manet.Dialer

	var doReuse bool
	for _, o := range opts {
		switch o := o.(type) {
		case TimeoutOpt:
			base.Timeout = time.Duration(o)
		case ReuseportOpt:
			doReuse = bool(o)
		default:
			return nil, fmt.Errorf("unrecognized option: %#v", o)
		}
	}

	tcpd, err := t.newTcpDialer(base, laddr, doReuse)
	if err != nil {
		return nil, err
	}

	t.dialers[s] = tcpd
	return tcpd, nil
}
コード例 #7
0
// rawConnDial dials the underlying net.Conn + manet.Conns
func (d *Dialer) rawConnDial(ctx context.Context, raddr ma.Multiaddr, remote peer.ID) (transport.Conn, error) {
	if strings.HasPrefix(raddr.String(), "/ip4/0.0.0.0") {
		log.Event(ctx, "connDialZeroAddr", lgbl.Dial("conn", d.LocalPeer, remote, nil, raddr))
		return nil, fmt.Errorf("Attempted to connect to zero address: %s", raddr)
	}

	sd := d.subDialerForAddr(raddr)
	if sd == nil {
		return nil, fmt.Errorf("no dialer for %s", raddr)
	}

	return sd.Dial(raddr)
}
コード例 #8
0
func addPortMapping(nmgr *natManager, intaddr ma.Multiaddr) {
	nat := nmgr.NAT()
	if nat == nil {
		panic("natManager addPortMapping called without a nat.")
	}

	// first, check if the port mapping already exists.
	for _, mapping := range nat.Mappings() {
		if mapping.InternalAddr().Equal(intaddr) {
			return // it exists! return.
		}
	}

	ctx := context.TODO()
	lm := make(lgbl.DeferredMap)
	lm["internalAddr"] = func() interface{} { return intaddr.String() }

	defer log.EventBegin(ctx, "natMgrAddPortMappingWait", lm).Done()

	select {
	case <-nmgr.proc.Closing():
		lm["outcome"] = "cancelled"
		return // no use.
	case <-nmgr.ready: // wait until it's ready.
	}

	// actually start the port map (sub-event because waiting may take a while)
	defer log.EventBegin(ctx, "natMgrAddPortMapping", lm).Done()

	// get the nat
	m, err := nat.NewMapping(intaddr)
	if err != nil {
		lm["outcome"] = "failure"
		lm["error"] = err
		return
	}

	extaddr, err := m.ExternalAddr()
	if err != nil {
		lm["outcome"] = "failure"
		lm["error"] = err
		return
	}

	lm["outcome"] = "success"
	lm["externalAddr"] = func() interface{} { return extaddr.String() }
	log.Infof("established nat port mapping: %s <--> %s", intaddr, extaddr)
}
コード例 #9
0
ファイル: utp.go プロジェクト: ymonk/openbazaar-go
func (t *UtpTransport) Dialer(laddr ma.Multiaddr, opts ...DialOpt) (Dialer, error) {
	t.sockLock.Lock()
	defer t.sockLock.Unlock()
	s, ok := t.sockets[laddr.String()]
	if ok {
		return s, nil
	}

	ns, err := t.newConn(laddr, opts...)
	if err != nil {
		return nil, err
	}

	t.sockets[laddr.String()] = ns
	return ns, nil
}
コード例 #10
0
ファイル: utp.go プロジェクト: ymonk/openbazaar-go
func (t *UtpTransport) Listen(laddr ma.Multiaddr) (Listener, error) {
	t.sockLock.Lock()
	defer t.sockLock.Unlock()
	s, ok := t.sockets[laddr.String()]
	if ok {
		return s, nil
	}

	ns, err := t.newConn(laddr)
	if err != nil {
		return nil, err
	}

	t.sockets[laddr.String()] = ns
	return ns, nil
}
コード例 #11
0
// Dial metadata is metadata for dial events
func Dial(sys string, lid, rid peer.ID, laddr, raddr ma.Multiaddr) DeferredMap {
	m := DeferredMap{}
	m["subsystem"] = sys
	if lid != "" {
		m["localPeer"] = func() interface{} { return lid.Pretty() }
	}
	if laddr != nil {
		m["localAddr"] = func() interface{} { return laddr.String() }
	}
	if rid != "" {
		m["remotePeer"] = func() interface{} { return rid.Pretty() }
	}
	if raddr != nil {
		m["remoteAddr"] = func() interface{} { return raddr.String() }
	}
	return m
}
コード例 #12
0
// NewMapping attemps to construct a mapping on protocol and internal port
// It will also periodically renew the mapping until the returned Mapping
// -- or its parent NAT -- is Closed.
//
// May not succeed, and mappings may change over time;
// NAT devices may not respect our port requests, and even lie.
// Clients should not store the mapped results, but rather always
// poll our object for the latest mappings.
func (nat *NAT) NewMapping(maddr ma.Multiaddr) (Mapping, error) {
	if nat == nil {
		return nil, fmt.Errorf("no nat available")
	}

	network, addr, err := manet.DialArgs(maddr)
	if err != nil {
		return nil, fmt.Errorf("DialArgs failed on addr:", maddr.String())
	}

	switch network {
	case "tcp", "tcp4", "tcp6":
		network = "tcp"
	case "udp", "udp4", "udp6":
		network = "udp"
	default:
		return nil, fmt.Errorf("transport not supported by NAT: %s", network)
	}

	intports := strings.Split(addr, ":")[1]
	intport, err := strconv.Atoi(intports)
	if err != nil {
		return nil, err
	}

	m := &mapping{
		nat:     nat,
		proto:   network,
		intport: intport,
		intaddr: maddr,
	}
	m.proc = goprocess.WithTeardown(func() error {
		nat.rmMapping(m)
		return nil
	})
	nat.addMapping(m)

	m.proc.AddChild(periodic.Every(MappingDuration/3, func(worker goprocess.Process) {
		nat.establishMapping(m)
	}))

	// do it once synchronously, so first mapping is done right away, and before exiting,
	// allowing users -- in the optimistic case -- to use results right after.
	nat.establishMapping(m)
	return m, nil
}