func (m *MessageRetriever) fetchIPFS(ctx commands.Context, pid peer.ID, addr ma.Multiaddr) {
ciphertext, err := ipfs.Cat(ctx, addr.String())
if err != nil {
return
}
m.attemptDecrypt(ciphertext, pid)
}
func (oas *ObservedAddrSet) Add(addr ma.Multiaddr, observer ma.Multiaddr) {
oas.Lock()
defer oas.Unlock()
// for zero-value.
if oas.addrs == nil {
oas.addrs = make(map[string]*ObservedAddr)
oas.ttl = peer.OwnObservedAddrTTL
}
s := addr.String()
oa, found := oas.addrs[s]
// first time seeing address.
if !found {
oa = &ObservedAddr{
Addr: addr,
SeenBy: make(map[string]struct{}),
}
oas.addrs[s] = oa
}
// mark the observer
oa.SeenBy[observerGroup(observer)] = struct{}{}
oa.LastSeen = time.Now()
}
// DialArgs is a convenience function returning arguments for use in net.Dial
func DialArgs(m ma.Multiaddr) (string, string, error) {
if !IsThinWaist(m) {
return "", "", fmt.Errorf("%s is not a 'thin waist' address", m)
}
str := m.String()
parts := strings.Split(str, "/")[1:]
if len(parts) == 2 { // only IP
return parts[0], parts[1], nil
}
network := parts[2]
if parts[2] == "udp" && len(parts) > 4 && parts[4] == "utp" {
network = parts[4]
}
var host string
switch parts[0] {
case "ip4":
network = network + "4"
host = strings.Join([]string{parts[1], parts[3]}, ":")
case "ip6":
network = network + "6"
host = fmt.Sprintf("[%s]:%s", parts[1], parts[3])
}
return network, host, nil
}
// DialArgs is a convenience function returning arguments for use in net.Dial
func DialArgs(m ma.Multiaddr) (string, string, error) {
// TODO: find a 'good' way to eliminate the function.
// My preference is with a multiaddr.Format(...) function
if !IsThinWaist(m) {
return "", "", fmt.Errorf("%s is not a 'thin waist' address", m)
}
str := m.String()
parts := strings.Split(str, "/")[1:]
if len(parts) == 2 { // only IP
return parts[0], parts[1], nil
}
network := parts[2]
if parts[2] == "udp" && len(parts) > 4 && parts[4] == "utp" {
network = parts[4]
}
var host string
switch parts[0] {
case "ip4":
network = network + "4"
host = strings.Join([]string{parts[1], parts[3]}, ":")
case "ip6":
network = network + "6"
host = fmt.Sprintf("[%s]:%s", parts[1], parts[3])
}
return network, host, nil
}
func (t *TcpTransport) Listen(laddr ma.Multiaddr) (Listener, error) {
if !t.Matches(laddr) {
return nil, fmt.Errorf("tcp transport cannot listen on %q", laddr)
}
t.llock.Lock()
defer t.llock.Unlock()
s := laddr.String()
l, found := t.listeners[s]
if found {
return l, nil
}
list, err := manetListen(laddr)
if err != nil {
return nil, err
}
tlist := &tcpListener{
list: list,
transport: t,
}
t.listeners[s] = tlist
return tlist, nil
}
func (t *TcpTransport) Dialer(laddr ma.Multiaddr, opts ...DialOpt) (Dialer, error) {
t.dlock.Lock()
defer t.dlock.Unlock()
s := laddr.String()
d, found := t.dialers[s]
if found {
return d, nil
}
var base manet.Dialer
var doReuse bool
for _, o := range opts {
switch o := o.(type) {
case TimeoutOpt:
base.Timeout = time.Duration(o)
case ReuseportOpt:
doReuse = bool(o)
default:
return nil, fmt.Errorf("unrecognized option: %#v", o)
}
}
tcpd, err := t.newTcpDialer(base, laddr, doReuse)
if err != nil {
return nil, err
}
t.dialers[s] = tcpd
return tcpd, nil
}
// rawConnDial dials the underlying net.Conn + manet.Conns
func (d *Dialer) rawConnDial(ctx context.Context, raddr ma.Multiaddr, remote peer.ID) (transport.Conn, error) {
if strings.HasPrefix(raddr.String(), "/ip4/0.0.0.0") {
log.Event(ctx, "connDialZeroAddr", lgbl.Dial("conn", d.LocalPeer, remote, nil, raddr))
return nil, fmt.Errorf("Attempted to connect to zero address: %s", raddr)
}
sd := d.subDialerForAddr(raddr)
if sd == nil {
return nil, fmt.Errorf("no dialer for %s", raddr)
}
return sd.Dial(raddr)
}
func addPortMapping(nmgr *natManager, intaddr ma.Multiaddr) {
nat := nmgr.NAT()
if nat == nil {
panic("natManager addPortMapping called without a nat.")
}
// first, check if the port mapping already exists.
for _, mapping := range nat.Mappings() {
if mapping.InternalAddr().Equal(intaddr) {
return // it exists! return.
}
}
ctx := context.TODO()
lm := make(lgbl.DeferredMap)
lm["internalAddr"] = func() interface{} { return intaddr.String() }
defer log.EventBegin(ctx, "natMgrAddPortMappingWait", lm).Done()
select {
case <-nmgr.proc.Closing():
lm["outcome"] = "cancelled"
return // no use.
case <-nmgr.ready: // wait until it's ready.
}
// actually start the port map (sub-event because waiting may take a while)
defer log.EventBegin(ctx, "natMgrAddPortMapping", lm).Done()
// get the nat
m, err := nat.NewMapping(intaddr)
if err != nil {
lm["outcome"] = "failure"
lm["error"] = err
return
}
extaddr, err := m.ExternalAddr()
if err != nil {
lm["outcome"] = "failure"
lm["error"] = err
return
}
lm["outcome"] = "success"
lm["externalAddr"] = func() interface{} { return extaddr.String() }
log.Infof("established nat port mapping: %s <--> %s", intaddr, extaddr)
}
func (t *UtpTransport) Dialer(laddr ma.Multiaddr, opts ...DialOpt) (Dialer, error) {
t.sockLock.Lock()
defer t.sockLock.Unlock()
s, ok := t.sockets[laddr.String()]
if ok {
return s, nil
}
ns, err := t.newConn(laddr, opts...)
if err != nil {
return nil, err
}
t.sockets[laddr.String()] = ns
return ns, nil
}
func (t *UtpTransport) Listen(laddr ma.Multiaddr) (Listener, error) {
t.sockLock.Lock()
defer t.sockLock.Unlock()
s, ok := t.sockets[laddr.String()]
if ok {
return s, nil
}
ns, err := t.newConn(laddr)
if err != nil {
return nil, err
}
t.sockets[laddr.String()] = ns
return ns, nil
}
// Dial metadata is metadata for dial events
func Dial(sys string, lid, rid peer.ID, laddr, raddr ma.Multiaddr) DeferredMap {
m := DeferredMap{}
m["subsystem"] = sys
if lid != "" {
m["localPeer"] = func() interface{} { return lid.Pretty() }
}
if laddr != nil {
m["localAddr"] = func() interface{} { return laddr.String() }
}
if rid != "" {
m["remotePeer"] = func() interface{} { return rid.Pretty() }
}
if raddr != nil {
m["remoteAddr"] = func() interface{} { return raddr.String() }
}
return m
}
// NewMapping attemps to construct a mapping on protocol and internal port
// It will also periodically renew the mapping until the returned Mapping
// -- or its parent NAT -- is Closed.
//
// May not succeed, and mappings may change over time;
// NAT devices may not respect our port requests, and even lie.
// Clients should not store the mapped results, but rather always
// poll our object for the latest mappings.
func (nat *NAT) NewMapping(maddr ma.Multiaddr) (Mapping, error) {
if nat == nil {
return nil, fmt.Errorf("no nat available")
}
network, addr, err := manet.DialArgs(maddr)
if err != nil {
return nil, fmt.Errorf("DialArgs failed on addr:", maddr.String())
}
switch network {
case "tcp", "tcp4", "tcp6":
network = "tcp"
case "udp", "udp4", "udp6":
network = "udp"
default:
return nil, fmt.Errorf("transport not supported by NAT: %s", network)
}
intports := strings.Split(addr, ":")[1]
intport, err := strconv.Atoi(intports)
if err != nil {
return nil, err
}
m := &mapping{
nat: nat,
proto: network,
intport: intport,
intaddr: maddr,
}
m.proc = goprocess.WithTeardown(func() error {
nat.rmMapping(m)
return nil
})
nat.addMapping(m)
m.proc.AddChild(periodic.Every(MappingDuration/3, func(worker goprocess.Process) {
nat.establishMapping(m)
}))
// do it once synchronously, so first mapping is done right away, and before exiting,
// allowing users -- in the optimistic case -- to use results right after.
nat.establishMapping(m)
return m, nil
}