func makeServerMetrics() ServerMetrics {
return ServerMetrics{
Conns: metric.NewCounter(MetaConns),
BytesInCount: metric.NewCounter(MetaBytesIn),
BytesOutCount: metric.NewCounter(MetaBytesOut),
}
}
func BenchmarkDecodeBinaryDecimal(b *testing.B) {
wbuf := writeBuffer{bytecount: metric.NewCounter()}
expected := new(parser.DDecimal)
expected.SetString("-1728718718271827121233.1212121212")
wbuf.writeBinaryDatum(expected)
rbuf := readBuffer{msg: wbuf.wrapped.Bytes()}
plen, err := rbuf.getUint32()
if err != nil {
b.Fatal(err)
}
bytes, err := rbuf.getBytes(int(plen))
if err != nil {
b.Fatal(err)
}
b.ResetTimer()
for i := 0; i < b.N; i++ {
b.StartTimer()
got, err := decodeOidDatum(oid.T_numeric, formatBinary, bytes)
b.StopTimer()
if err != nil {
b.Fatal(err)
} else if got.Compare(expected) != 0 {
b.Fatalf("expected %s, got %s", expected, got)
}
}
}
func BenchmarkWriteBinaryDecimal(b *testing.B) {
buf := writeBuffer{bytecount: metric.NewCounter()}
dec := new(parser.DDecimal)
dec.SetString("-1728718718271827121233.1212121212")
// Warm up the buffer.
buf.writeBinaryDatum(dec)
buf.wrapped.Reset()
b.ResetTimer()
for i := 0; i < b.N; i++ {
b.StartTimer()
buf.writeBinaryDatum(dec)
b.StopTimer()
buf.wrapped.Reset()
}
}
// NewExecutor creates an Executor and registers a callback on the
// system config.
func NewExecutor(cfg ExecutorConfig, stopper *stop.Stopper) *Executor {
exec := &Executor{
cfg: cfg,
reCache: parser.NewRegexpCache(512),
Latency: metric.NewLatency(MetaLatency),
TxnBeginCount: metric.NewCounter(MetaTxnBegin),
TxnCommitCount: metric.NewCounter(MetaTxnCommit),
TxnAbortCount: metric.NewCounter(MetaTxnAbort),
TxnRollbackCount: metric.NewCounter(MetaTxnRollback),
SelectCount: metric.NewCounter(MetaSelect),
UpdateCount: metric.NewCounter(MetaUpdate),
InsertCount: metric.NewCounter(MetaInsert),
DeleteCount: metric.NewCounter(MetaDelete),
DdlCount: metric.NewCounter(MetaDdl),
MiscCount: metric.NewCounter(MetaMisc),
QueryCount: metric.NewCounter(MetaQuery),
}
exec.systemConfigCond = sync.NewCond(exec.systemConfigMu.RLocker())
gossipUpdateC := cfg.Gossip.RegisterSystemConfigChannel()
stopper.RunWorker(func() {
for {
select {
case <-gossipUpdateC:
sysCfg, _ := cfg.Gossip.GetSystemConfig()
exec.updateSystemConfig(sysCfg)
case <-stopper.ShouldStop():
return
}
}
})
return exec
}
func newStoreMetrics() *StoreMetrics {
storeRegistry := metric.NewRegistry()
sm := &StoreMetrics{
registry: storeRegistry,
// Replica metrics.
ReplicaCount: metric.NewCounter(metaReplicaCount),
ReservedReplicaCount: metric.NewCounter(metaReservedReplicaCount),
RaftLeaderCount: metric.NewGauge(metaRaftLeaderCount),
RaftLeaderNotLeaseHolderCount: metric.NewGauge(metaRaftLeaderNotLeaseHolderCount),
LeaseHolderCount: metric.NewGauge(metaLeaseHolderCount),
// Range metrics.
AvailableRangeCount: metric.NewGauge(metaAvailableRangeCount),
// Replication metrics.
ReplicaAllocatorNoopCount: metric.NewGauge(metaReplicaAllocatorNoopCount),
ReplicaAllocatorRemoveCount: metric.NewGauge(metaReplicaAllocatorRemoveCount),
ReplicaAllocatorAddCount: metric.NewGauge(metaReplicaAllocatorAddCount),
ReplicaAllocatorRemoveDeadCount: metric.NewGauge(metaReplicaAllocatorRemoveDeadCount),
// Lease request metrics.
LeaseRequestSuccessCount: metric.NewCounter(metaLeaseRequestSuccessCount),
LeaseRequestErrorCount: metric.NewCounter(metaLeaseRequestErrorCount),
// Storage metrics.
LiveBytes: metric.NewGauge(metaLiveBytes),
KeyBytes: metric.NewGauge(metaKeyBytes),
ValBytes: metric.NewGauge(metaValBytes),
IntentBytes: metric.NewGauge(metaIntentBytes),
LiveCount: metric.NewGauge(metaLiveCount),
KeyCount: metric.NewGauge(metaKeyCount),
ValCount: metric.NewGauge(metaValCount),
IntentCount: metric.NewGauge(metaIntentCount),
IntentAge: metric.NewGauge(metaIntentAge),
GcBytesAge: metric.NewGauge(metaGcBytesAge),
LastUpdateNanos: metric.NewGauge(metaLastUpdateNanos),
Capacity: metric.NewGauge(metaCapacity),
Available: metric.NewGauge(metaAvailable),
Reserved: metric.NewCounter(metaReserved),
SysBytes: metric.NewGauge(metaSysBytes),
SysCount: metric.NewGauge(metaSysCount),
// RocksDB metrics.
RdbBlockCacheHits: metric.NewGauge(metaRdbBlockCacheHits),
RdbBlockCacheMisses: metric.NewGauge(metaRdbBlockCacheMisses),
RdbBlockCacheUsage: metric.NewGauge(metaRdbBlockCacheUsage),
RdbBlockCachePinnedUsage: metric.NewGauge(metaRdbBlockCachePinnedUsage),
RdbBloomFilterPrefixChecked: metric.NewGauge(metaRdbBloomFilterPrefixChecked),
RdbBloomFilterPrefixUseful: metric.NewGauge(metaRdbBloomFilterPrefixUseful),
RdbMemtableHits: metric.NewGauge(metaRdbMemtableHits),
RdbMemtableMisses: metric.NewGauge(metaRdbMemtableMisses),
RdbMemtableTotalSize: metric.NewGauge(metaRdbMemtableTotalSize),
RdbFlushes: metric.NewGauge(metaRdbFlushes),
RdbCompactions: metric.NewGauge(metaRdbCompactions),
RdbTableReadersMemEstimate: metric.NewGauge(metaRdbTableReadersMemEstimate),
RdbReadAmplification: metric.NewGauge(metaRdbReadAmplification),
// Range event metrics.
RangeSplits: metric.NewCounter(metaRangeSplits),
RangeAdds: metric.NewCounter(metaRangeAdds),
RangeRemoves: metric.NewCounter(metaRangeRemoves),
RangeSnapshotsGenerated: metric.NewCounter(metaRangeSnapshotsGenerated),
RangeSnapshotsNormalApplied: metric.NewCounter(metaRangeSnapshotsNormalApplied),
RangeSnapshotsPreemptiveApplied: metric.NewCounter(metaRangeSnapshotsPreemptiveApplied),
// Raft processing metrics.
RaftTicks: metric.NewCounter(metaRaftTicks),
RaftSelectDurationNanos: metric.NewCounter(metaRaftSelectDurationNanos),
RaftWorkingDurationNanos: metric.NewCounter(metaRaftWorkingDurationNanos),
RaftTickingDurationNanos: metric.NewCounter(metaRaftTickingDurationNanos),
// Raft message metrics.
RaftRcvdMsgProp: metric.NewCounter(metaRaftRcvdProp),
RaftRcvdMsgApp: metric.NewCounter(metaRaftRcvdApp),
RaftRcvdMsgAppResp: metric.NewCounter(metaRaftRcvdAppResp),
RaftRcvdMsgVote: metric.NewCounter(metaRaftRcvdVote),
RaftRcvdMsgVoteResp: metric.NewCounter(metaRaftRcvdVoteResp),
RaftRcvdMsgSnap: metric.NewCounter(metaRaftRcvdSnap),
RaftRcvdMsgHeartbeat: metric.NewCounter(metaRaftRcvdHeartbeat),
RaftRcvdMsgHeartbeatResp: metric.NewCounter(metaRaftRcvdHeartbeatResp),
RaftRcvdMsgTransferLeader: metric.NewCounter(metaRaftRcvdTransferLeader),
RaftRcvdMsgTimeoutNow: metric.NewCounter(metaRaftRcvdTimeoutNow),
raftRcvdMessages: make(map[raftpb.MessageType]*metric.Counter, len(raftpb.MessageType_name)),
RaftEnqueuedPending: metric.NewGauge(metaRaftEnqueuedPending),
}
sm.raftRcvdMessages[raftpb.MsgProp] = sm.RaftRcvdMsgProp
sm.raftRcvdMessages[raftpb.MsgApp] = sm.RaftRcvdMsgApp
sm.raftRcvdMessages[raftpb.MsgAppResp] = sm.RaftRcvdMsgAppResp
sm.raftRcvdMessages[raftpb.MsgVote] = sm.RaftRcvdMsgVote
sm.raftRcvdMessages[raftpb.MsgVoteResp] = sm.RaftRcvdMsgVoteResp
sm.raftRcvdMessages[raftpb.MsgSnap] = sm.RaftRcvdMsgSnap
sm.raftRcvdMessages[raftpb.MsgHeartbeat] = sm.RaftRcvdMsgHeartbeat
sm.raftRcvdMessages[raftpb.MsgHeartbeatResp] = sm.RaftRcvdMsgHeartbeatResp
sm.raftRcvdMessages[raftpb.MsgTransferLeader] = sm.RaftRcvdMsgTransferLeader
sm.raftRcvdMessages[raftpb.MsgTimeoutNow] = sm.RaftRcvdMsgTimeoutNow
storeRegistry.AddMetricStruct(sm)
return sm
}
// TestMetricsRecorder verifies that the metrics recorder properly formats the
// statistics from various registries, both for Time Series and for Status
// Summaries.
func TestMetricsRecorder(t *testing.T) {
defer leaktest.AfterTest(t)()
// ========================================
// Construct a series of fake descriptors for use in test.
// ========================================
nodeDesc := roachpb.NodeDescriptor{
NodeID: roachpb.NodeID(1),
}
storeDesc1 := roachpb.StoreDescriptor{
StoreID: roachpb.StoreID(1),
Capacity: roachpb.StoreCapacity{
Capacity: 100,
Available: 50,
},
}
storeDesc2 := roachpb.StoreDescriptor{
StoreID: roachpb.StoreID(2),
Capacity: roachpb.StoreCapacity{
Capacity: 200,
Available: 75,
},
}
// ========================================
// Create registries and add them to the recorder (two node-level, two
// store-level).
// ========================================
reg1 := metric.NewRegistry()
store1 := fakeStore{
storeID: roachpb.StoreID(1),
desc: storeDesc1,
registry: metric.NewRegistry(),
}
store2 := fakeStore{
storeID: roachpb.StoreID(2),
desc: storeDesc2,
registry: metric.NewRegistry(),
}
manual := hlc.NewManualClock(100)
recorder := NewMetricsRecorder(hlc.NewClock(manual.UnixNano))
recorder.AddStore(store1)
recorder.AddStore(store2)
recorder.AddNode(reg1, nodeDesc, 50)
// Ensure the metric system's view of time does not advance during this test
// as the test expects time to not advance too far which would age the actual
// data (e.g. in histogram's) unexpectedly.
defer metric.TestingSetNow(func() time.Time {
return time.Unix(0, manual.UnixNano()).UTC()
})()
// ========================================
// Generate Metrics Data & Expected Results
// ========================================
// Flatten the four registries into an array for ease of use.
regList := []struct {
reg *metric.Registry
prefix string
source int64
isNode bool
}{
{
reg: reg1,
prefix: "one.",
source: 1,
isNode: true,
},
{
reg: reg1,
prefix: "two.",
source: 1,
isNode: true,
},
{
reg: store1.registry,
prefix: "",
source: int64(store1.storeID),
isNode: false,
},
{
reg: store2.registry,
prefix: "",
source: int64(store2.storeID),
isNode: false,
},
}
// Every registry will have a copy of the following metrics.
metricNames := []struct {
name string
typ string
val int64
}{
{"testGauge", "gauge", 20},
{"testGaugeFloat64", "floatgauge", 20},
{"testCounter", "counter", 5},
{"testRate", "rate", 2},
{"testHistogram", "histogram", 10},
{"testLatency", "latency", 10},
// Stats needed for store summaries.
{"ranges", "counter", 1},
{"replicas.leaders", "gauge", 1},
{"replicas.leaseholders", "gauge", 1},
{"ranges.available", "gauge", 1},
}
// Add the metrics to each registry and set their values. At the same time,
// generate expected time series results and status summary metric values.
var expected []tspb.TimeSeriesData
expectedNodeSummaryMetrics := make(map[string]float64)
expectedStoreSummaryMetrics := make(map[string]float64)
// addExpected generates expected data for a single metric data point.
addExpected := func(prefix, name string, source, time, val int64, isNode bool) {
// Generate time series data.
tsPrefix := "cr.node."
if !isNode {
tsPrefix = "cr.store."
}
expect := tspb.TimeSeriesData{
Name: tsPrefix + prefix + name,
Source: strconv.FormatInt(source, 10),
Datapoints: []tspb.TimeSeriesDatapoint{
{
TimestampNanos: time,
Value: float64(val),
},
},
}
expected = append(expected, expect)
// Generate status summary data.
if isNode {
expectedNodeSummaryMetrics[prefix+name] = float64(val)
} else {
// This can overwrite the previous value, but this is expected as
// all stores in our tests have identical values; when comparing
// status summaries, the same map is used as expected data for all
// stores.
expectedStoreSummaryMetrics[prefix+name] = float64(val)
}
}
for _, reg := range regList {
for _, data := range metricNames {
switch data.typ {
case "gauge":
g := metric.NewGauge(metric.Metadata{Name: reg.prefix + data.name})
reg.reg.AddMetric(g)
g.Update(data.val)
addExpected(reg.prefix, data.name, reg.source, 100, data.val, reg.isNode)
case "floatgauge":
g := metric.NewGaugeFloat64(metric.Metadata{Name: reg.prefix + data.name})
reg.reg.AddMetric(g)
g.Update(float64(data.val))
addExpected(reg.prefix, data.name, reg.source, 100, data.val, reg.isNode)
case "counter":
c := metric.NewCounter(metric.Metadata{Name: reg.prefix + data.name})
reg.reg.AddMetric(c)
c.Inc((data.val))
addExpected(reg.prefix, data.name, reg.source, 100, data.val, reg.isNode)
case "rate":
r := metric.NewRates(metric.Metadata{Name: reg.prefix + data.name})
reg.reg.AddMetricGroup(r)
r.Add(data.val)
addExpected(reg.prefix, data.name+"-count", reg.source, 100, data.val, reg.isNode)
for _, scale := range metric.DefaultTimeScales {
// Rate data is subject to timing errors in tests. Zero out
// these values.
addExpected(reg.prefix, data.name+sep+scale.Name(), reg.source, 100, 0, reg.isNode)
}
case "histogram":
h := metric.NewHistogram(metric.Metadata{Name: reg.prefix + data.name}, time.Second, 1000, 2)
reg.reg.AddMetric(h)
h.RecordValue(data.val)
for _, q := range recordHistogramQuantiles {
addExpected(reg.prefix, data.name+q.suffix, reg.source, 100, data.val, reg.isNode)
}
case "latency":
l := metric.NewLatency(metric.Metadata{Name: reg.prefix + data.name})
reg.reg.AddMetricGroup(l)
l.RecordValue(data.val)
// Latency is simply three histograms (at different resolution
// time scales).
for _, scale := range metric.DefaultTimeScales {
for _, q := range recordHistogramQuantiles {
addExpected(reg.prefix, data.name+sep+scale.Name()+q.suffix, reg.source, 100, data.val, reg.isNode)
}
}
}
}
}
// ========================================
// Verify time series data
// ========================================
actual := recorder.GetTimeSeriesData()
// Zero-out timing-sensitive rate values from actual data.
for _, act := range actual {
match, err := regexp.MatchString(`testRate-\d+m`, act.Name)
if err != nil {
t.Fatal(err)
}
if match {
act.Datapoints[0].Value = 0.0
}
}
// Actual comparison is simple: sort the resulting arrays by time and name,
// and use reflect.DeepEqual.
sort.Sort(byTimeAndName(actual))
sort.Sort(byTimeAndName(expected))
if a, e := actual, expected; !reflect.DeepEqual(a, e) {
t.Errorf("recorder did not yield expected time series collection; diff:\n %v", pretty.Diff(e, a))
}
// ========================================
// Verify node summary generation
// ========================================
expectedNodeSummary := &NodeStatus{
Desc: nodeDesc,
BuildInfo: build.GetInfo(),
StartedAt: 50,
UpdatedAt: 100,
Metrics: expectedNodeSummaryMetrics,
StoreStatuses: []StoreStatus{
{
Desc: storeDesc1,
Metrics: expectedStoreSummaryMetrics,
},
{
Desc: storeDesc2,
Metrics: expectedStoreSummaryMetrics,
},
},
}
nodeSummary := recorder.GetStatusSummary()
if nodeSummary == nil {
t.Fatalf("recorder did not return nodeSummary.")
}
sort.Sort(byStoreDescID(nodeSummary.StoreStatuses))
if a, e := nodeSummary, expectedNodeSummary; !reflect.DeepEqual(a, e) {
t.Errorf("recorder did not produce expected NodeSummary; diff:\n %v", pretty.Diff(e, a))
}
}
