/*
* generate
* as $c, n
*/
func ginscon(as int, c int64, n2 *gc.Node) {
var n1 gc.Node
switch as {
case x86.AADDL,
x86.AMOVL,
x86.ALEAL:
gc.Nodconst(&n1, gc.Types[gc.TINT32], c)
default:
gc.Nodconst(&n1, gc.Types[gc.TINT64], c)
}
if as != x86.AMOVQ && (c < -(1<<31) || c >= 1<<31) {
// cannot have 64-bit immediate in ADD, etc.
// instead, MOV into register first.
var ntmp gc.Node
gc.Regalloc(&ntmp, gc.Types[gc.TINT64], nil)
gins(x86.AMOVQ, &n1, &ntmp)
gins(as, &ntmp, n2)
gc.Regfree(&ntmp)
return
}
gins(as, &n1, n2)
}
/*
* generate byte multiply:
* res = nl * nr
* there is no 2-operand byte multiply instruction so
* we do a full-width multiplication and truncate afterwards.
*/
func cgen_bmul(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) bool {
if optoas(op, nl.Type) != x86.AIMULB {
return false
}
// largest ullman on left.
if nl.Ullman < nr.Ullman {
tmp := nl
nl = nr
nr = tmp
}
// generate operands in "8-bit" registers.
var n1b gc.Node
gc.Regalloc(&n1b, nl.Type, res)
gc.Cgen(nl, &n1b)
var n2b gc.Node
gc.Regalloc(&n2b, nr.Type, nil)
gc.Cgen(nr, &n2b)
// perform full-width multiplication.
t := gc.Types[gc.TUINT64]
if gc.Issigned[nl.Type.Etype] {
t = gc.Types[gc.TINT64]
}
var n1 gc.Node
gc.Nodreg(&n1, t, int(n1b.Reg))
var n2 gc.Node
gc.Nodreg(&n2, t, int(n2b.Reg))
a := optoas(op, t)
gins(a, &n2, &n1)
// truncate.
gmove(&n1, res)
gc.Regfree(&n1b)
gc.Regfree(&n2b)
return true
}
// res = runtime.getg()
func getg(res *gc.Node) {
var n1 gc.Node
gc.Regalloc(&n1, res.Type, res)
mov := optoas(gc.OAS, gc.Types[gc.Tptr])
p := gins(mov, nil, &n1)
p.From.Type = obj.TYPE_REG
p.From.Reg = x86.REG_TLS
p = gins(mov, nil, &n1)
p.From = p.To
p.From.Type = obj.TYPE_MEM
p.From.Index = x86.REG_TLS
p.From.Scale = 1
gmove(&n1, res)
gc.Regfree(&n1)
}
/*
* register dr is one of the special ones (AX, CX, DI, SI, etc.).
* we need to use it. if it is already allocated as a temporary
* (r > 1; can only happen if a routine like sgen passed a
* special as cgen's res and then cgen used regalloc to reuse
* it as its own temporary), then move it for now to another
* register. caller must call restx to move it back.
* the move is not necessary if dr == res, because res is
* known to be dead.
*/
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
r := int(reg[dr])
// save current ax and dx if they are live
// and not the destination
*oldx = gc.Node{}
gc.Nodreg(x, t, dr)
if r > 1 && !gc.Samereg(x, res) {
gc.Regalloc(oldx, gc.Types[gc.TINT64], nil)
x.Type = gc.Types[gc.TINT64]
gmove(x, oldx)
x.Type = t
oldx.Ostk = int32(r) // squirrel away old r value
reg[dr] = 1
}
}
/*
* generate shift according to op, one of:
* res = nl << nr
* res = nl >> nr
*/
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
a := optoas(op, nl.Type)
if nr.Op == gc.OLITERAL {
var n1 gc.Node
gc.Regalloc(&n1, nl.Type, res)
gc.Cgen(nl, &n1)
sc := uint64(gc.Mpgetfix(nr.Val.U.Xval))
if sc >= uint64(nl.Type.Width*8) {
// large shift gets 2 shifts by width-1
var n3 gc.Node
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n1)
gins(a, &n3, &n1)
} else {
gins(a, nr, &n1)
}
gmove(&n1, res)
gc.Regfree(&n1)
return
}
if nl.Ullman >= gc.UINF {
var n4 gc.Node
gc.Tempname(&n4, nl.Type)
gc.Cgen(nl, &n4)
nl = &n4
}
if nr.Ullman >= gc.UINF {
var n5 gc.Node
gc.Tempname(&n5, nr.Type)
gc.Cgen(nr, &n5)
nr = &n5
}
rcx := int(reg[x86.REG_CX])
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
// Allow either uint32 or uint64 as shift type,
// to avoid unnecessary conversion from uint32 to uint64
// just to do the comparison.
tcount := gc.Types[gc.Simtype[nr.Type.Etype]]
if tcount.Etype < gc.TUINT32 {
tcount = gc.Types[gc.TUINT32]
}
gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
var n3 gc.Node
gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)
var oldcx gc.Node
if rcx > 0 && !gc.Samereg(&cx, res) {
gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
gmove(&cx, &oldcx)
}
cx.Type = tcount
var n2 gc.Node
if gc.Samereg(&cx, res) {
gc.Regalloc(&n2, nl.Type, nil)
} else {
gc.Regalloc(&n2, nl.Type, res)
}
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &n2)
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
} else {
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
gc.Cgen(nl, &n2)
}
gc.Regfree(&n3)
// test and fix up large shifts
if !bounded {
gc.Nodconst(&n3, tcount, nl.Type.Width*8)
gins(optoas(gc.OCMP, tcount), &n1, &n3)
p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n2)
} else {
gc.Nodconst(&n3, nl.Type, 0)
gmove(&n3, &n2)
}
gc.Patch(p1, gc.Pc)
}
gins(a, &n1, &n2)
if oldcx.Op != 0 {
cx.Type = gc.Types[gc.TUINT64]
gmove(&oldcx, &cx)
gc.Regfree(&oldcx)
}
gmove(&n2, res)
gc.Regfree(&n1)
gc.Regfree(&n2)
}
/*
* generate division.
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will trap.
// Also the byte divide instruction needs AH,
// which we otherwise don't have to deal with.
// Easiest way to avoid for int8, int16: use int32.
// For int32 and int64, use explicit test.
// Could use int64 hw for int32.
t := nl.Type
t0 := t
check := 0
if gc.Issigned[t.Etype] {
check = 1
if gc.Isconst(nl, gc.CTINT) && gc.Mpgetfix(nl.Val.U.Xval) != -(1<<uint64(t.Width*8-1)) {
check = 0
} else if gc.Isconst(nr, gc.CTINT) && gc.Mpgetfix(nr.Val.U.Xval) != -1 {
check = 0
}
}
if t.Width < 4 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT32]
} else {
t = gc.Types[gc.TUINT32]
}
check = 0
}
a := optoas(op, t)
var n3 gc.Node
gc.Regalloc(&n3, t0, nil)
var ax gc.Node
var oldax gc.Node
if nl.Ullman >= nr.Ullman {
savex(x86.REG_AX, &ax, &oldax, res, t0)
gc.Cgen(nl, &ax)
gc.Regalloc(&ax, t0, &ax) // mark ax live during cgen
gc.Cgen(nr, &n3)
gc.Regfree(&ax)
} else {
gc.Cgen(nr, &n3)
savex(x86.REG_AX, &ax, &oldax, res, t0)
gc.Cgen(nl, &ax)
}
if t != t0 {
// Convert
ax1 := ax
n31 := n3
ax.Type = t
n3.Type = t
gmove(&ax1, &ax)
gmove(&n31, &n3)
}
var n4 gc.Node
if gc.Nacl {
// Native Client does not relay the divide-by-zero trap
// to the executing program, so we must insert a check
// for ourselves.
gc.Nodconst(&n4, t, 0)
gins(optoas(gc.OCMP, t), &n3, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
}
var p2 *obj.Prog
if check != 0 {
gc.Nodconst(&n4, t, -1)
gins(optoas(gc.OCMP, t), &n3, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, &ax)
gmove(&ax, res)
} else {
// a % (-1) is 0.
gc.Nodconst(&n4, t, 0)
gmove(&n4, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
var olddx gc.Node
var dx gc.Node
savex(x86.REG_DX, &dx, &olddx, res, t)
if !gc.Issigned[t.Etype] {
gc.Nodconst(&n4, t, 0)
gmove(&n4, &dx)
} else {
gins(optoas(gc.OEXTEND, t), nil, nil)
}
gins(a, &n3, nil)
gc.Regfree(&n3)
if op == gc.ODIV {
gmove(&ax, res)
} else {
gmove(&dx, res)
}
restx(&dx, &olddx)
if check != 0 {
gc.Patch(p2, gc.Pc)
}
restx(&ax, &oldax)
}
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
gc.Convconst(&con, t.Type, &f.Val)
f = &con
ft = tt // so big switch will choose a simple mov
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if gc.Isfloat[tt] {
goto hard
}
// 64-bit immediates are really 32-bit sign-extended
// unless moving into a register.
if gc.Isint[tt] {
if gc.Mpcmpfixfix(con.Val.U.Xval, gc.Minintval[gc.TINT32]) < 0 {
goto hard
}
if gc.Mpcmpfixfix(con.Val.U.Xval, gc.Maxintval[gc.TINT32]) > 0 {
goto hard
}
}
}
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatal("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TINT8<<16 | gc.TUINT8,
gc.TUINT8<<16 | gc.TINT8,
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = x86.AMOVB
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TINT16<<16 | gc.TUINT16,
gc.TUINT16<<16 | gc.TINT16,
gc.TUINT16<<16 | gc.TUINT16,
gc.TINT32<<16 | gc.TINT16,
// truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT64<<16 | gc.TINT16,
gc.TUINT64<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TUINT16,
gc.TUINT32<<16 | gc.TUINT16,
gc.TINT64<<16 | gc.TUINT16,
gc.TUINT64<<16 | gc.TUINT16:
a = x86.AMOVW
case gc.TINT32<<16 | gc.TINT32, // same size
gc.TINT32<<16 | gc.TUINT32,
gc.TUINT32<<16 | gc.TINT32,
gc.TUINT32<<16 | gc.TUINT32:
a = x86.AMOVL
case gc.TINT64<<16 | gc.TINT32, // truncate
gc.TUINT64<<16 | gc.TINT32,
gc.TINT64<<16 | gc.TUINT32,
gc.TUINT64<<16 | gc.TUINT32:
a = x86.AMOVQL
case gc.TINT64<<16 | gc.TINT64, // same size
gc.TINT64<<16 | gc.TUINT64,
gc.TUINT64<<16 | gc.TINT64,
gc.TUINT64<<16 | gc.TUINT64:
a = x86.AMOVQ
/*
* integer up-conversions
*/
case gc.TINT8<<16 | gc.TINT16, // sign extend int8
gc.TINT8<<16 | gc.TUINT16:
a = x86.AMOVBWSX
goto rdst
case gc.TINT8<<16 | gc.TINT32,
gc.TINT8<<16 | gc.TUINT32:
a = x86.AMOVBLSX
goto rdst
case gc.TINT8<<16 | gc.TINT64,
gc.TINT8<<16 | gc.TUINT64:
a = x86.AMOVBQSX
goto rdst
case gc.TUINT8<<16 | gc.TINT16, // zero extend uint8
gc.TUINT8<<16 | gc.TUINT16:
a = x86.AMOVBWZX
goto rdst
case gc.TUINT8<<16 | gc.TINT32,
gc.TUINT8<<16 | gc.TUINT32:
a = x86.AMOVBLZX
goto rdst
case gc.TUINT8<<16 | gc.TINT64,
gc.TUINT8<<16 | gc.TUINT64:
a = x86.AMOVBQZX
goto rdst
case gc.TINT16<<16 | gc.TINT32, // sign extend int16
gc.TINT16<<16 | gc.TUINT32:
a = x86.AMOVWLSX
goto rdst
case gc.TINT16<<16 | gc.TINT64,
gc.TINT16<<16 | gc.TUINT64:
a = x86.AMOVWQSX
goto rdst
case gc.TUINT16<<16 | gc.TINT32, // zero extend uint16
gc.TUINT16<<16 | gc.TUINT32:
a = x86.AMOVWLZX
goto rdst
case gc.TUINT16<<16 | gc.TINT64,
gc.TUINT16<<16 | gc.TUINT64:
a = x86.AMOVWQZX
goto rdst
case gc.TINT32<<16 | gc.TINT64, // sign extend int32
gc.TINT32<<16 | gc.TUINT64:
a = x86.AMOVLQSX
goto rdst
// AMOVL into a register zeros the top of the register,
// so this is not always necessary, but if we rely on AMOVL
// the optimizer is almost certain to screw with us.
case gc.TUINT32<<16 | gc.TINT64, // zero extend uint32
gc.TUINT32<<16 | gc.TUINT64:
a = x86.AMOVLQZX
goto rdst
/*
* float to integer
*/
case gc.TFLOAT32<<16 | gc.TINT32:
a = x86.ACVTTSS2SL
goto rdst
case gc.TFLOAT64<<16 | gc.TINT32:
a = x86.ACVTTSD2SL
goto rdst
case gc.TFLOAT32<<16 | gc.TINT64:
a = x86.ACVTTSS2SQ
goto rdst
case gc.TFLOAT64<<16 | gc.TINT64:
a = x86.ACVTTSD2SQ
goto rdst
// convert via int32.
case gc.TFLOAT32<<16 | gc.TINT16,
gc.TFLOAT32<<16 | gc.TINT8,
gc.TFLOAT32<<16 | gc.TUINT16,
gc.TFLOAT32<<16 | gc.TUINT8,
gc.TFLOAT64<<16 | gc.TINT16,
gc.TFLOAT64<<16 | gc.TINT8,
gc.TFLOAT64<<16 | gc.TUINT16,
gc.TFLOAT64<<16 | gc.TUINT8:
cvt = gc.Types[gc.TINT32]
goto hard
// convert via int64.
case gc.TFLOAT32<<16 | gc.TUINT32,
gc.TFLOAT64<<16 | gc.TUINT32:
cvt = gc.Types[gc.TINT64]
goto hard
// algorithm is:
// if small enough, use native float64 -> int64 conversion.
// otherwise, subtract 2^63, convert, and add it back.
case gc.TFLOAT32<<16 | gc.TUINT64,
gc.TFLOAT64<<16 | gc.TUINT64:
a := x86.ACVTTSS2SQ
if ft == gc.TFLOAT64 {
a = x86.ACVTTSD2SQ
}
bignodes()
var r1 gc.Node
gc.Regalloc(&r1, gc.Types[ft], nil)
var r2 gc.Node
gc.Regalloc(&r2, gc.Types[tt], t)
var r3 gc.Node
gc.Regalloc(&r3, gc.Types[ft], nil)
var r4 gc.Node
gc.Regalloc(&r4, gc.Types[tt], nil)
gins(optoas(gc.OAS, f.Type), f, &r1)
gins(optoas(gc.OCMP, f.Type), &bigf, &r1)
p1 := gc.Gbranch(optoas(gc.OLE, f.Type), nil, +1)
gins(a, &r1, &r2)
p2 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
gins(optoas(gc.OAS, f.Type), &bigf, &r3)
gins(optoas(gc.OSUB, f.Type), &r3, &r1)
gins(a, &r1, &r2)
gins(x86.AMOVQ, &bigi, &r4)
gins(x86.AXORQ, &r4, &r2)
gc.Patch(p2, gc.Pc)
gmove(&r2, t)
gc.Regfree(&r4)
gc.Regfree(&r3)
gc.Regfree(&r2)
gc.Regfree(&r1)
return
/*
* integer to float
*/
case gc.TINT32<<16 | gc.TFLOAT32:
a = x86.ACVTSL2SS
goto rdst
case gc.TINT32<<16 | gc.TFLOAT64:
a = x86.ACVTSL2SD
goto rdst
case gc.TINT64<<16 | gc.TFLOAT32:
a = x86.ACVTSQ2SS
goto rdst
case gc.TINT64<<16 | gc.TFLOAT64:
a = x86.ACVTSQ2SD
goto rdst
// convert via int32
case gc.TINT16<<16 | gc.TFLOAT32,
gc.TINT16<<16 | gc.TFLOAT64,
gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hard
// convert via int64.
case gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT64]
goto hard
// algorithm is:
// if small enough, use native int64 -> uint64 conversion.
// otherwise, halve (rounding to odd?), convert, and double.
case gc.TUINT64<<16 | gc.TFLOAT32,
gc.TUINT64<<16 | gc.TFLOAT64:
a := x86.ACVTSQ2SS
if tt == gc.TFLOAT64 {
a = x86.ACVTSQ2SD
}
var zero gc.Node
gc.Nodconst(&zero, gc.Types[gc.TUINT64], 0)
var one gc.Node
gc.Nodconst(&one, gc.Types[gc.TUINT64], 1)
var r1 gc.Node
gc.Regalloc(&r1, f.Type, f)
var r2 gc.Node
gc.Regalloc(&r2, t.Type, t)
var r3 gc.Node
gc.Regalloc(&r3, f.Type, nil)
var r4 gc.Node
gc.Regalloc(&r4, f.Type, nil)
gmove(f, &r1)
gins(x86.ACMPQ, &r1, &zero)
p1 := gc.Gbranch(x86.AJLT, nil, +1)
gins(a, &r1, &r2)
p2 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
gmove(&r1, &r3)
gins(x86.ASHRQ, &one, &r3)
gmove(&r1, &r4)
gins(x86.AANDL, &one, &r4)
gins(x86.AORQ, &r4, &r3)
gins(a, &r3, &r2)
gins(optoas(gc.OADD, t.Type), &r2, &r2)
gc.Patch(p2, gc.Pc)
gmove(&r2, t)
gc.Regfree(&r4)
gc.Regfree(&r3)
gc.Regfree(&r2)
gc.Regfree(&r1)
return
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32:
a = x86.AMOVSS
case gc.TFLOAT64<<16 | gc.TFLOAT64:
a = x86.AMOVSD
case gc.TFLOAT32<<16 | gc.TFLOAT64:
a = x86.ACVTSS2SD
goto rdst
case gc.TFLOAT64<<16 | gc.TFLOAT32:
a = x86.ACVTSD2SS
goto rdst
}
gins(a, f, t)
return
// requires register destination
rdst:
{
var r1 gc.Node
gc.Regalloc(&r1, t.Type, t)
gins(a, f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
// requires register intermediate
hard:
var r1 gc.Node
gc.Regalloc(&r1, cvt, t)
gmove(f, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
/*
* generate code to compute address of n,
* a reference to a (perhaps nested) field inside
* an array or struct.
* return 0 on failure, 1 on success.
* on success, leaves usable address in a.
*
* caller is responsible for calling sudoclean
* after successful sudoaddable,
* to release the register used for a.
*/
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
if n.Type == nil {
return false
}
*a = obj.Addr{}
switch n.Op {
case gc.OLITERAL:
if !gc.Isconst(n, gc.CTINT) {
break
}
v := gc.Mpgetfix(n.Val.U.Xval)
if v >= 32000 || v <= -32000 {
break
}
switch as {
default:
return false
case x86.AADDB,
x86.AADDW,
x86.AADDL,
x86.AADDQ,
x86.ASUBB,
x86.ASUBW,
x86.ASUBL,
x86.ASUBQ,
x86.AANDB,
x86.AANDW,
x86.AANDL,
x86.AANDQ,
x86.AORB,
x86.AORW,
x86.AORL,
x86.AORQ,
x86.AXORB,
x86.AXORW,
x86.AXORL,
x86.AXORQ,
x86.AINCB,
x86.AINCW,
x86.AINCL,
x86.AINCQ,
x86.ADECB,
x86.ADECW,
x86.ADECL,
x86.ADECQ,
x86.AMOVB,
x86.AMOVW,
x86.AMOVL,
x86.AMOVQ:
break
}
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
gc.Naddr(a, n)
return true
case gc.ODOT,
gc.ODOTPTR:
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
var nn *gc.Node
var oary [10]int64
o := gc.Dotoffset(n, oary[:], &nn)
if nn == nil {
sudoclean()
return false
}
if nn.Addable && o == 1 && oary[0] >= 0 {
// directly addressable set of DOTs
n1 := *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
gc.Naddr(a, &n1)
return true
}
gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
n1 := *reg
n1.Op = gc.OINDREG
if oary[0] >= 0 {
gc.Agen(nn, reg)
n1.Xoffset = oary[0]
} else {
gc.Cgen(nn, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[0] + 1)
}
for i := 1; i < o; i++ {
if oary[i] >= 0 {
gc.Fatal("can't happen")
}
gins(movptr, &n1, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[i] + 1)
}
a.Type = obj.TYPE_NONE
a.Index = obj.TYPE_NONE
gc.Fixlargeoffset(&n1)
gc.Naddr(a, &n1)
return true
case gc.OINDEX:
return false
}
return false
}
