/*
* generate division.
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) {
t := nl.Type
t0 := t
if t.Width < 8 {
if t.IsSigned() {
t = gc.Types[gc.TINT64]
} else {
t = gc.Types[gc.TUINT64]
}
}
a := optoas(gc.ODIV, t)
var tl gc.Node
gc.Regalloc(&tl, t0, nil)
var tr gc.Node
gc.Regalloc(&tr, t0, nil)
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &tl)
gc.Cgen(nr, &tr)
} else {
gc.Cgen(nr, &tr)
gc.Cgen(nl, &tl)
}
if t != t0 {
// Convert
tl2 := tl
tr2 := tr
tl.Type = t
tr.Type = t
gmove(&tl2, &tl)
gmove(&tr2, &tr)
}
// Handle divide-by-zero panic.
p1 := ginsbranch(mips.ABNE, nil, &tr, nil, 0)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
gins3(a, &tr, &tl, nil)
gc.Regfree(&tr)
if op == gc.ODIV {
var lo gc.Node
gc.Nodreg(&lo, gc.Types[gc.TUINT64], mips.REG_LO)
gins(mips.AMOVV, &lo, &tl)
} else { // remainder in REG_HI
var hi gc.Node
gc.Nodreg(&hi, gc.Types[gc.TUINT64], mips.REG_HI)
gins(mips.AMOVV, &hi, &tl)
}
gmove(&tl, res)
gc.Regfree(&tl)
}
/*
* n is a 64-bit value. fill in lo and hi to refer to its 32-bit halves.
*/
func split64(n *gc.Node, lo *gc.Node, hi *gc.Node) {
if !gc.Is64(n.Type) {
gc.Fatalf("split64 %v", n.Type)
}
if nsclean >= len(sclean) {
gc.Fatalf("split64 clean")
}
sclean[nsclean].Op = gc.OEMPTY
nsclean++
switch n.Op {
default:
switch n.Op {
default:
var n1 gc.Node
if !dotaddable(n, &n1) {
gc.Igen(n, &n1, nil)
sclean[nsclean-1] = n1
}
n = &n1
case gc.ONAME:
if n.Class == gc.PPARAMREF {
var n1 gc.Node
gc.Cgen(n.Name.Heapaddr, &n1)
sclean[nsclean-1] = n1
n = &n1
}
// nothing
case gc.OINDREG:
break
}
*lo = *n
*hi = *n
lo.Type = gc.Types[gc.TUINT32]
if n.Type.Etype == gc.TINT64 {
hi.Type = gc.Types[gc.TINT32]
} else {
hi.Type = gc.Types[gc.TUINT32]
}
hi.Xoffset += 4
case gc.OLITERAL:
var n1 gc.Node
n.Convconst(&n1, n.Type)
i := n1.Int()
gc.Nodconst(lo, gc.Types[gc.TUINT32], int64(uint32(i)))
i >>= 32
if n.Type.Etype == gc.TINT64 {
gc.Nodconst(hi, gc.Types[gc.TINT32], int64(int32(i)))
} else {
gc.Nodconst(hi, gc.Types[gc.TUINT32], int64(uint32(i)))
}
}
}
func restx(x *gc.Node, oldx *gc.Node) {
if oldx.Op != 0 {
x.Type = gc.Types[gc.TINT64]
gc.SetReg(int(x.Reg), int(oldx.Etype))
gmove(oldx, x)
gc.Regfree(oldx)
}
}
/*
* register dr is one of the special ones (AX, CX, DI, SI, etc.).
* we need to use it. if it is already allocated as a temporary
* (r > 1; can only happen if a routine like sgen passed a
* special as cgen's res and then cgen used regalloc to reuse
* it as its own temporary), then move it for now to another
* register. caller must call restx to move it back.
* the move is not necessary if dr == res, because res is
* known to be dead.
*/
func savex(dr int, x *gc.Node, oldx *gc.Node, res *gc.Node, t *gc.Type) {
r := uint8(gc.GetReg(dr))
// save current ax and dx if they are live
// and not the destination
*oldx = gc.Node{}
gc.Nodreg(x, t, dr)
if r > 1 && !gc.Samereg(x, res) {
gc.Regalloc(oldx, gc.Types[gc.TINT64], nil)
x.Type = gc.Types[gc.TINT64]
gmove(x, oldx)
x.Type = t
oldx.Etype = r // squirrel away old r value
gc.SetReg(dr, 1)
}
}
func restx(x *gc.Node, oldx *gc.Node) {
gc.Regfree(x)
if oldx.Op != 0 {
x.Type = gc.Types[gc.TINT32]
gmove(oldx, x)
}
}
func restx(x *gc.Node, oldx *gc.Node) {
if oldx.Op != 0 {
x.Type = gc.Types[gc.TINT64]
reg[x.Reg] = oldx.Etype
gmove(oldx, x)
gc.Regfree(oldx)
}
}
func dotaddable(n *gc.Node, n1 *gc.Node) bool {
if n.Op != gc.ODOT {
return false
}
var oary [10]int64
var nn *gc.Node
o := gc.Dotoffset(n, oary[:], &nn)
if nn != nil && nn.Addable && o == 1 && oary[0] >= 0 {
*n1 = *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
return true
}
return false
}
/*
* generate division.
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will generate undefined result.
// Also need to explicitly trap on division on zero,
// the hardware will silently generate undefined result.
// DIVW will leave unpredicable result in higher 32-bit,
// so always use DIVD/DIVDU.
t := nl.Type
t0 := t
check := 0
if gc.Issigned[t.Etype] {
check = 1
if gc.Isconst(nl, gc.CTINT) && nl.Int() != -(1<<uint64(t.Width*8-1)) {
check = 0
} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
check = 0
}
}
if t.Width < 8 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT64]
} else {
t = gc.Types[gc.TUINT64]
}
check = 0
}
a := optoas(gc.ODIV, t)
var tl gc.Node
gc.Regalloc(&tl, t0, nil)
var tr gc.Node
gc.Regalloc(&tr, t0, nil)
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &tl)
gc.Cgen(nr, &tr)
} else {
gc.Cgen(nr, &tr)
gc.Cgen(nl, &tl)
}
if t != t0 {
// Convert
tl2 := tl
tr2 := tr
tl.Type = t
tr.Type = t
gmove(&tl2, &tl)
gmove(&tr2, &tr)
}
// Handle divide-by-zero panic.
p1 := gins(optoas(gc.OCMP, t), &tr, nil)
p1.To.Type = obj.TYPE_REG
p1.To.Reg = ppc64.REGZERO
p1 = gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
var p2 *obj.Prog
if check != 0 {
var nm1 gc.Node
gc.Nodconst(&nm1, t, -1)
gins(optoas(gc.OCMP, t), &tr, &nm1)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, &tl)
gmove(&tl, res)
} else {
// a % (-1) is 0.
var nz gc.Node
gc.Nodconst(&nz, t, 0)
gmove(&nz, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
p1 = gins(a, &tr, &tl)
if op == gc.ODIV {
gc.Regfree(&tr)
gmove(&tl, res)
} else {
// A%B = A-(A/B*B)
var tm gc.Node
gc.Regalloc(&tm, t, nil)
// patch div to use the 3 register form
// TODO(minux): add gins3?
p1.Reg = p1.To.Reg
p1.To.Reg = tm.Reg
gins(optoas(gc.OMUL, t), &tr, &tm)
gc.Regfree(&tr)
gins(optoas(gc.OSUB, t), &tm, &tl)
gc.Regfree(&tm)
gmove(&tl, res)
}
gc.Regfree(&tl)
if check != 0 {
gc.Patch(p2, gc.Pc)
}
}
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := nl.Type.Width
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 8 // bytes
q := w / 8 // quads
if q < 4 {
// Write sequence of MOV 0, off(base) instead of using STOSQ.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSQ loop.
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Agenr(nl, &n1, nil)
n1.Op = gc.OINDREG
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
for {
tmp14 := q
q--
if tmp14 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVQ, &z, &n1)
n1.Xoffset += 8
}
if c >= 4 {
gc.Nodconst(&z, gc.Types[gc.TUINT32], 0)
n1.Type = z.Type
gins(x86.AMOVL, &z, &n1)
n1.Xoffset += 4
c -= 4
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for {
tmp15 := c
c--
if tmp15 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVB, &z, &n1)
n1.Xoffset++
}
gc.Regfree(&n1)
return
}
var oldn1 gc.Node
var n1 gc.Node
savex(x86.REG_DI, &n1, &oldn1, nil, gc.Types[gc.Tptr])
gc.Agen(nl, &n1)
var ax gc.Node
var oldax gc.Node
savex(x86.REG_AX, &ax, &oldax, nil, gc.Types[gc.Tptr])
gconreg(x86.AMOVL, 0, x86.REG_AX)
if q > 128 || gc.Nacl {
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSQ, nil, nil) // STOQ AL,*(DI)+
} else {
if di := dzDI(q); di != 0 {
gconreg(addptr, di, x86.REG_DI)
}
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
p.To.Offset = dzOff(q)
}
z := ax
di := n1
if w >= 8 && c >= 4 {
di.Op = gc.OINDREG
z.Type = gc.Types[gc.TINT64]
di.Type = z.Type
p := gins(x86.AMOVQ, &z, &di)
p.To.Scale = 1
p.To.Offset = c - 8
} else if c >= 4 {
di.Op = gc.OINDREG
z.Type = gc.Types[gc.TINT32]
di.Type = z.Type
gins(x86.AMOVL, &z, &di)
if c > 4 {
p := gins(x86.AMOVL, &z, &di)
p.To.Scale = 1
p.To.Offset = c - 4
}
} else {
for c > 0 {
gins(x86.ASTOSB, nil, nil) // STOB AL,*(DI)+
c--
}
}
restx(&n1, &oldn1)
restx(&ax, &oldax)
}
/*
* generate shift according to op, one of:
* res = nl << nr
* res = nl >> nr
*/
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
a := optoas(op, nl.Type)
if nr.Op == gc.OLITERAL {
var n1 gc.Node
gc.Regalloc(&n1, nl.Type, res)
gc.Cgen(nl, &n1)
sc := uint64(nr.Int())
if sc >= uint64(nl.Type.Width*8) {
// large shift gets 2 shifts by width-1
var n3 gc.Node
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n1)
gins(a, &n3, &n1)
} else {
gins(a, nr, &n1)
}
gmove(&n1, res)
gc.Regfree(&n1)
return
}
if nl.Ullman >= gc.UINF {
var n4 gc.Node
gc.Tempname(&n4, nl.Type)
gc.Cgen(nl, &n4)
nl = &n4
}
if nr.Ullman >= gc.UINF {
var n5 gc.Node
gc.Tempname(&n5, nr.Type)
gc.Cgen(nr, &n5)
nr = &n5
}
rcx := gc.GetReg(x86.REG_CX)
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.TUINT32], x86.REG_CX)
// Allow either uint32 or uint64 as shift type,
// to avoid unnecessary conversion from uint32 to uint64
// just to do the comparison.
tcount := gc.Types[gc.Simtype[nr.Type.Etype]]
if tcount.Etype < gc.TUINT32 {
tcount = gc.Types[gc.TUINT32]
}
gc.Regalloc(&n1, nr.Type, &n1) // to hold the shift type in CX
var n3 gc.Node
gc.Regalloc(&n3, tcount, &n1) // to clear high bits of CX
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TUINT64], x86.REG_CX)
var oldcx gc.Node
if rcx > 0 && !gc.Samereg(&cx, res) {
gc.Regalloc(&oldcx, gc.Types[gc.TUINT64], nil)
gmove(&cx, &oldcx)
}
cx.Type = tcount
var n2 gc.Node
if gc.Samereg(&cx, res) {
gc.Regalloc(&n2, nl.Type, nil)
} else {
gc.Regalloc(&n2, nl.Type, res)
}
if nl.Ullman >= nr.Ullman {
gc.Cgen(nl, &n2)
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
} else {
gc.Cgen(nr, &n1)
gmove(&n1, &n3)
gc.Cgen(nl, &n2)
}
gc.Regfree(&n3)
// test and fix up large shifts
if !bounded {
gc.Nodconst(&n3, tcount, nl.Type.Width*8)
gins(optoas(gc.OCMP, tcount), &n1, &n3)
p1 := gc.Gbranch(optoas(gc.OLT, tcount), nil, +1)
if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
gc.Nodconst(&n3, gc.Types[gc.TUINT32], nl.Type.Width*8-1)
gins(a, &n3, &n2)
} else {
gc.Nodconst(&n3, nl.Type, 0)
gmove(&n3, &n2)
}
gc.Patch(p1, gc.Pc)
}
gins(a, &n1, &n2)
if oldcx.Op != 0 {
cx.Type = gc.Types[gc.TUINT64]
gmove(&oldcx, &cx)
gc.Regfree(&oldcx)
}
gmove(&n2, res)
gc.Regfree(&n1)
gc.Regfree(&n2)
}
/*
* generate division.
* generates one of:
* res = nl / nr
* res = nl % nr
* according to op.
*/
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node) {
// Have to be careful about handling
// most negative int divided by -1 correctly.
// The hardware will trap.
// Also the byte divide instruction needs AH,
// which we otherwise don't have to deal with.
// Easiest way to avoid for int8, int16: use int32.
// For int32 and int64, use explicit test.
// Could use int64 hw for int32.
t := nl.Type
t0 := t
check := 0
if gc.Issigned[t.Etype] {
check = 1
if gc.Isconst(nl, gc.CTINT) && nl.Int() != -(1<<uint64(t.Width*8-1)) {
check = 0
} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
check = 0
}
}
if t.Width < 4 {
if gc.Issigned[t.Etype] {
t = gc.Types[gc.TINT32]
} else {
t = gc.Types[gc.TUINT32]
}
check = 0
}
a := optoas(op, t)
var n3 gc.Node
gc.Regalloc(&n3, t0, nil)
var ax gc.Node
var oldax gc.Node
if nl.Ullman >= nr.Ullman {
savex(x86.REG_AX, &ax, &oldax, res, t0)
gc.Cgen(nl, &ax)
gc.Regalloc(&ax, t0, &ax) // mark ax live during cgen
gc.Cgen(nr, &n3)
gc.Regfree(&ax)
} else {
gc.Cgen(nr, &n3)
savex(x86.REG_AX, &ax, &oldax, res, t0)
gc.Cgen(nl, &ax)
}
if t != t0 {
// Convert
ax1 := ax
n31 := n3
ax.Type = t
n3.Type = t
gmove(&ax1, &ax)
gmove(&n31, &n3)
}
var n4 gc.Node
if gc.Nacl {
// Native Client does not relay the divide-by-zero trap
// to the executing program, so we must insert a check
// for ourselves.
gc.Nodconst(&n4, t, 0)
gins(optoas(gc.OCMP, t), &n3, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if panicdiv == nil {
panicdiv = gc.Sysfunc("panicdivide")
}
gc.Ginscall(panicdiv, -1)
gc.Patch(p1, gc.Pc)
}
var p2 *obj.Prog
if check != 0 {
gc.Nodconst(&n4, t, -1)
gins(optoas(gc.OCMP, t), &n3, &n4)
p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
if op == gc.ODIV {
// a / (-1) is -a.
gins(optoas(gc.OMINUS, t), nil, &ax)
gmove(&ax, res)
} else {
// a % (-1) is 0.
gc.Nodconst(&n4, t, 0)
gmove(&n4, res)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
}
var olddx gc.Node
var dx gc.Node
savex(x86.REG_DX, &dx, &olddx, res, t)
if !gc.Issigned[t.Etype] {
gc.Nodconst(&n4, t, 0)
gmove(&n4, &dx)
} else {
gins(optoas(gc.OEXTEND, t), nil, nil)
}
gins(a, &n3, nil)
gc.Regfree(&n3)
if op == gc.ODIV {
gmove(&ax, res)
} else {
gmove(&dx, res)
}
restx(&dx, &olddx)
if check != 0 {
gc.Patch(p2, gc.Pc)
}
restx(&ax, &oldax)
}
/*
* attempt to generate 64-bit
* res = n
* return 1 on success, 0 if op not handled.
*/
func cgen64(n *gc.Node, res *gc.Node) {
if res.Op != gc.OINDREG && res.Op != gc.ONAME {
gc.Dump("n", n)
gc.Dump("res", res)
gc.Fatalf("cgen64 %v of %v", gc.Oconv(int(n.Op), 0), gc.Oconv(int(res.Op), 0))
}
switch n.Op {
default:
gc.Fatalf("cgen64 %v", gc.Oconv(int(n.Op), 0))
case gc.OMINUS:
gc.Cgen(n.Left, res)
var hi1 gc.Node
var lo1 gc.Node
split64(res, &lo1, &hi1)
gins(x86.ANEGL, nil, &lo1)
gins(x86.AADCL, ncon(0), &hi1)
gins(x86.ANEGL, nil, &hi1)
splitclean()
return
case gc.OCOM:
gc.Cgen(n.Left, res)
var lo1 gc.Node
var hi1 gc.Node
split64(res, &lo1, &hi1)
gins(x86.ANOTL, nil, &lo1)
gins(x86.ANOTL, nil, &hi1)
splitclean()
return
// binary operators.
// common setup below.
case gc.OADD,
gc.OSUB,
gc.OMUL,
gc.OLROT,
gc.OLSH,
gc.ORSH,
gc.OAND,
gc.OOR,
gc.OXOR:
break
}
l := n.Left
r := n.Right
if !l.Addable {
var t1 gc.Node
gc.Tempname(&t1, l.Type)
gc.Cgen(l, &t1)
l = &t1
}
if r != nil && !r.Addable {
var t2 gc.Node
gc.Tempname(&t2, r.Type)
gc.Cgen(r, &t2)
r = &t2
}
var ax gc.Node
gc.Nodreg(&ax, gc.Types[gc.TINT32], x86.REG_AX)
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TINT32], x86.REG_CX)
var dx gc.Node
gc.Nodreg(&dx, gc.Types[gc.TINT32], x86.REG_DX)
// Setup for binary operation.
var hi1 gc.Node
var lo1 gc.Node
split64(l, &lo1, &hi1)
var lo2 gc.Node
var hi2 gc.Node
if gc.Is64(r.Type) {
split64(r, &lo2, &hi2)
}
// Do op. Leave result in DX:AX.
switch n.Op {
// TODO: Constants
case gc.OADD:
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
gins(x86.AADDL, &lo2, &ax)
gins(x86.AADCL, &hi2, &dx)
// TODO: Constants.
case gc.OSUB:
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
gins(x86.ASUBL, &lo2, &ax)
gins(x86.ASBBL, &hi2, &dx)
case gc.OMUL:
// let's call the next three EX, FX and GX
var ex, fx, gx gc.Node
gc.Regalloc(&ex, gc.Types[gc.TPTR32], nil)
gc.Regalloc(&fx, gc.Types[gc.TPTR32], nil)
gc.Regalloc(&gx, gc.Types[gc.TPTR32], nil)
// load args into DX:AX and EX:GX.
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
gins(x86.AMOVL, &lo2, &gx)
gins(x86.AMOVL, &hi2, &ex)
// if DX and EX are zero, use 32 x 32 -> 64 unsigned multiply.
gins(x86.AMOVL, &dx, &fx)
gins(x86.AORL, &ex, &fx)
p1 := gc.Gbranch(x86.AJNE, nil, 0)
gins(x86.AMULL, &gx, nil) // implicit &ax
p2 := gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
// full 64x64 -> 64, from 32x32 -> 64.
gins(x86.AIMULL, &gx, &dx)
gins(x86.AMOVL, &ax, &fx)
gins(x86.AIMULL, &ex, &fx)
gins(x86.AADDL, &dx, &fx)
gins(x86.AMOVL, &gx, &dx)
gins(x86.AMULL, &dx, nil) // implicit &ax
gins(x86.AADDL, &fx, &dx)
gc.Patch(p2, gc.Pc)
gc.Regfree(&ex)
gc.Regfree(&fx)
gc.Regfree(&gx)
// We only rotate by a constant c in [0,64).
// if c >= 32:
// lo, hi = hi, lo
// c -= 32
// if c == 0:
// no-op
// else:
// t = hi
// shld hi:lo, c
// shld lo:t, c
case gc.OLROT:
v := uint64(r.Int())
if v >= 32 {
// reverse during load to do the first 32 bits of rotate
v -= 32
gins(x86.AMOVL, &lo1, &dx)
gins(x86.AMOVL, &hi1, &ax)
} else {
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
}
if v == 0 {
} else // done
{
gins(x86.AMOVL, &dx, &cx)
p1 := gins(x86.ASHLL, ncon(uint32(v)), &dx)
p1.From.Index = x86.REG_AX // double-width shift
p1.From.Scale = 0
p1 = gins(x86.ASHLL, ncon(uint32(v)), &ax)
p1.From.Index = x86.REG_CX // double-width shift
p1.From.Scale = 0
}
case gc.OLSH:
if r.Op == gc.OLITERAL {
v := uint64(r.Int())
if v >= 64 {
if gc.Is64(r.Type) {
splitclean()
}
splitclean()
split64(res, &lo2, &hi2)
gins(x86.AMOVL, ncon(0), &lo2)
gins(x86.AMOVL, ncon(0), &hi2)
splitclean()
return
}
if v >= 32 {
if gc.Is64(r.Type) {
splitclean()
}
split64(res, &lo2, &hi2)
gmove(&lo1, &hi2)
if v > 32 {
gins(x86.ASHLL, ncon(uint32(v-32)), &hi2)
}
gins(x86.AMOVL, ncon(0), &lo2)
splitclean()
splitclean()
return
}
// general shift
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
p1 := gins(x86.ASHLL, ncon(uint32(v)), &dx)
p1.From.Index = x86.REG_AX // double-width shift
p1.From.Scale = 0
gins(x86.ASHLL, ncon(uint32(v)), &ax)
break
}
// load value into DX:AX.
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
// load shift value into register.
// if high bits are set, zero value.
var p1 *obj.Prog
if gc.Is64(r.Type) {
gins(x86.ACMPL, &hi2, ncon(0))
p1 = gc.Gbranch(x86.AJNE, nil, +1)
gins(x86.AMOVL, &lo2, &cx)
} else {
cx.Type = gc.Types[gc.TUINT32]
gmove(r, &cx)
}
// if shift count is >=64, zero value
gins(x86.ACMPL, &cx, ncon(64))
p2 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
if p1 != nil {
gc.Patch(p1, gc.Pc)
}
gins(x86.AXORL, &dx, &dx)
gins(x86.AXORL, &ax, &ax)
gc.Patch(p2, gc.Pc)
// if shift count is >= 32, zero low.
gins(x86.ACMPL, &cx, ncon(32))
p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
gins(x86.AMOVL, &ax, &dx)
gins(x86.ASHLL, &cx, &dx) // SHLL only uses bottom 5 bits of count
gins(x86.AXORL, &ax, &ax)
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
// general shift
p1 = gins(x86.ASHLL, &cx, &dx)
p1.From.Index = x86.REG_AX // double-width shift
p1.From.Scale = 0
gins(x86.ASHLL, &cx, &ax)
gc.Patch(p2, gc.Pc)
case gc.ORSH:
if r.Op == gc.OLITERAL {
v := uint64(r.Int())
if v >= 64 {
if gc.Is64(r.Type) {
splitclean()
}
splitclean()
split64(res, &lo2, &hi2)
if hi1.Type.Etype == gc.TINT32 {
gmove(&hi1, &lo2)
gins(x86.ASARL, ncon(31), &lo2)
gmove(&hi1, &hi2)
gins(x86.ASARL, ncon(31), &hi2)
} else {
gins(x86.AMOVL, ncon(0), &lo2)
gins(x86.AMOVL, ncon(0), &hi2)
}
splitclean()
return
}
if v >= 32 {
if gc.Is64(r.Type) {
splitclean()
}
split64(res, &lo2, &hi2)
gmove(&hi1, &lo2)
if v > 32 {
gins(optoas(gc.ORSH, hi1.Type), ncon(uint32(v-32)), &lo2)
}
if hi1.Type.Etype == gc.TINT32 {
gmove(&hi1, &hi2)
gins(x86.ASARL, ncon(31), &hi2)
} else {
gins(x86.AMOVL, ncon(0), &hi2)
}
splitclean()
splitclean()
return
}
// general shift
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
p1 := gins(x86.ASHRL, ncon(uint32(v)), &ax)
p1.From.Index = x86.REG_DX // double-width shift
p1.From.Scale = 0
gins(optoas(gc.ORSH, hi1.Type), ncon(uint32(v)), &dx)
break
}
// load value into DX:AX.
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
// load shift value into register.
// if high bits are set, zero value.
var p1 *obj.Prog
if gc.Is64(r.Type) {
gins(x86.ACMPL, &hi2, ncon(0))
p1 = gc.Gbranch(x86.AJNE, nil, +1)
gins(x86.AMOVL, &lo2, &cx)
} else {
cx.Type = gc.Types[gc.TUINT32]
gmove(r, &cx)
}
// if shift count is >=64, zero or sign-extend value
gins(x86.ACMPL, &cx, ncon(64))
p2 := gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
if p1 != nil {
gc.Patch(p1, gc.Pc)
}
if hi1.Type.Etype == gc.TINT32 {
gins(x86.ASARL, ncon(31), &dx)
gins(x86.AMOVL, &dx, &ax)
} else {
gins(x86.AXORL, &dx, &dx)
gins(x86.AXORL, &ax, &ax)
}
gc.Patch(p2, gc.Pc)
// if shift count is >= 32, sign-extend hi.
gins(x86.ACMPL, &cx, ncon(32))
p1 = gc.Gbranch(optoas(gc.OLT, gc.Types[gc.TUINT32]), nil, +1)
gins(x86.AMOVL, &dx, &ax)
if hi1.Type.Etype == gc.TINT32 {
gins(x86.ASARL, &cx, &ax) // SARL only uses bottom 5 bits of count
gins(x86.ASARL, ncon(31), &dx)
} else {
gins(x86.ASHRL, &cx, &ax)
gins(x86.AXORL, &dx, &dx)
}
p2 = gc.Gbranch(obj.AJMP, nil, 0)
gc.Patch(p1, gc.Pc)
// general shift
p1 = gins(x86.ASHRL, &cx, &ax)
p1.From.Index = x86.REG_DX // double-width shift
p1.From.Scale = 0
gins(optoas(gc.ORSH, hi1.Type), &cx, &dx)
gc.Patch(p2, gc.Pc)
// make constant the right side (it usually is anyway).
case gc.OXOR,
gc.OAND,
gc.OOR:
if lo1.Op == gc.OLITERAL {
nswap(&lo1, &lo2)
nswap(&hi1, &hi2)
}
if lo2.Op == gc.OLITERAL {
// special cases for constants.
lv := uint32(lo2.Int())
hv := uint32(hi2.Int())
splitclean() // right side
split64(res, &lo2, &hi2)
switch n.Op {
case gc.OXOR:
gmove(&lo1, &lo2)
gmove(&hi1, &hi2)
switch lv {
case 0:
break
case 0xffffffff:
gins(x86.ANOTL, nil, &lo2)
default:
gins(x86.AXORL, ncon(lv), &lo2)
}
switch hv {
case 0:
break
case 0xffffffff:
gins(x86.ANOTL, nil, &hi2)
default:
gins(x86.AXORL, ncon(hv), &hi2)
}
case gc.OAND:
switch lv {
case 0:
gins(x86.AMOVL, ncon(0), &lo2)
default:
gmove(&lo1, &lo2)
if lv != 0xffffffff {
gins(x86.AANDL, ncon(lv), &lo2)
}
}
switch hv {
case 0:
gins(x86.AMOVL, ncon(0), &hi2)
default:
gmove(&hi1, &hi2)
if hv != 0xffffffff {
gins(x86.AANDL, ncon(hv), &hi2)
}
}
case gc.OOR:
switch lv {
case 0:
gmove(&lo1, &lo2)
case 0xffffffff:
gins(x86.AMOVL, ncon(0xffffffff), &lo2)
default:
gmove(&lo1, &lo2)
gins(x86.AORL, ncon(lv), &lo2)
}
switch hv {
case 0:
gmove(&hi1, &hi2)
case 0xffffffff:
gins(x86.AMOVL, ncon(0xffffffff), &hi2)
default:
gmove(&hi1, &hi2)
gins(x86.AORL, ncon(hv), &hi2)
}
}
splitclean()
splitclean()
return
}
gins(x86.AMOVL, &lo1, &ax)
gins(x86.AMOVL, &hi1, &dx)
gins(optoas(n.Op, lo1.Type), &lo2, &ax)
gins(optoas(n.Op, lo1.Type), &hi2, &dx)
}
if gc.Is64(r.Type) {
splitclean()
}
splitclean()
split64(res, &lo1, &hi1)
gins(x86.AMOVL, &ax, &lo1)
gins(x86.AMOVL, &dx, &hi1)
splitclean()
}
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := uint32(nl.Type.Width)
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 4 // bytes
q := w / 4 // quads
if q < 4 {
// Write sequence of MOV 0, off(base) instead of using STOSL.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSL loop.
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Regalloc(&n1, gc.Types[gc.Tptr], nil)
gc.Agen(nl, &n1)
n1.Op = gc.OINDREG
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
for ; q > 0; q-- {
n1.Type = z.Type
gins(x86.AMOVL, &z, &n1)
n1.Xoffset += 4
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for ; c > 0; c-- {
n1.Type = z.Type
gins(x86.AMOVB, &z, &n1)
n1.Xoffset++
}
gc.Regfree(&n1)
return
}
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.Tptr], x86.REG_DI)
gc.Agen(nl, &n1)
gconreg(x86.AMOVL, 0, x86.REG_AX)
if q > 128 || (q >= 4 && gc.Nacl) {
gconreg(x86.AMOVL, int64(q), x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSL, nil, nil) // STOL AL,*(DI)+
} else if q >= 4 {
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
// 1 and 128 = magic constants: see ../../runtime/asm_386.s
p.To.Offset = 1 * (128 - int64(q))
} else {
for q > 0 {
gins(x86.ASTOSL, nil, nil) // STOL AL,*(DI)+
q--
}
}
for c > 0 {
gins(x86.ASTOSB, nil, nil) // STOB AL,*(DI)+
c--
}
}
func blockcopy(n, ns *gc.Node, osrc, odst, w int64) {
var noddi gc.Node
gc.Nodreg(&noddi, gc.Types[gc.Tptr], x86.REG_DI)
var nodsi gc.Node
gc.Nodreg(&nodsi, gc.Types[gc.Tptr], x86.REG_SI)
var nodl gc.Node
var nodr gc.Node
if n.Ullman >= ns.Ullman {
gc.Agenr(n, &nodr, &nodsi)
if ns.Op == gc.ONAME {
gc.Gvardef(ns)
}
gc.Agenr(ns, &nodl, &noddi)
} else {
if ns.Op == gc.ONAME {
gc.Gvardef(ns)
}
gc.Agenr(ns, &nodl, &noddi)
gc.Agenr(n, &nodr, &nodsi)
}
if nodl.Reg != x86.REG_DI {
gmove(&nodl, &noddi)
}
if nodr.Reg != x86.REG_SI {
gmove(&nodr, &nodsi)
}
gc.Regfree(&nodl)
gc.Regfree(&nodr)
c := w % 8 // bytes
q := w / 8 // quads
var oldcx gc.Node
var cx gc.Node
savex(x86.REG_CX, &cx, &oldcx, nil, gc.Types[gc.TINT64])
// if we are copying forward on the stack and
// the src and dst overlap, then reverse direction
if osrc < odst && odst < osrc+w {
// reverse direction
gins(x86.ASTD, nil, nil) // set direction flag
if c > 0 {
gconreg(addptr, w-1, x86.REG_SI)
gconreg(addptr, w-1, x86.REG_DI)
gconreg(movptr, c, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
}
if q > 0 {
if c > 0 {
gconreg(addptr, -7, x86.REG_SI)
gconreg(addptr, -7, x86.REG_DI)
} else {
gconreg(addptr, w-8, x86.REG_SI)
gconreg(addptr, w-8, x86.REG_DI)
}
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)-,*(DI)-
}
// we leave with the flag clear
gins(x86.ACLD, nil, nil)
} else {
// normal direction
if q > 128 || (gc.Nacl && q >= 4) {
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
} else if q >= 4 {
var oldx0 gc.Node
var x0 gc.Node
savex(x86.REG_X0, &x0, &oldx0, nil, gc.Types[gc.TFLOAT64])
p := gins(obj.ADUFFCOPY, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
// 64 blocks taking 14 bytes each
// see ../../../../runtime/mkduff.go
p.To.Offset = 14 * (64 - q/2)
restx(&x0, &oldx0)
if q%2 != 0 {
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
}
} else if !gc.Nacl && c == 0 {
// We don't need the MOVSQ side-effect of updating SI and DI,
// and issuing a sequence of MOVQs directly is faster.
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
for q > 0 {
gmove(&nodsi, &cx) // MOVQ x+(SI),CX
gmove(&cx, &noddi) // MOVQ CX,x+(DI)
nodsi.Xoffset += 8
noddi.Xoffset += 8
q--
}
} else {
for q > 0 {
gins(x86.AMOVSQ, nil, nil) // MOVQ *(SI)+,*(DI)+
q--
}
}
// copy the remaining c bytes
if w < 4 || c <= 1 || (odst < osrc && osrc < odst+w) {
for c > 0 {
gins(x86.AMOVSB, nil, nil) // MOVB *(SI)+,*(DI)+
c--
}
} else if w < 8 || c <= 4 {
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
cx.Type = gc.Types[gc.TINT32]
nodsi.Type = gc.Types[gc.TINT32]
noddi.Type = gc.Types[gc.TINT32]
if c > 4 {
nodsi.Xoffset = 0
noddi.Xoffset = 0
gmove(&nodsi, &cx)
gmove(&cx, &noddi)
}
nodsi.Xoffset = c - 4
noddi.Xoffset = c - 4
gmove(&nodsi, &cx)
gmove(&cx, &noddi)
} else {
nodsi.Op = gc.OINDREG
noddi.Op = gc.OINDREG
cx.Type = gc.Types[gc.TINT64]
nodsi.Type = gc.Types[gc.TINT64]
noddi.Type = gc.Types[gc.TINT64]
nodsi.Xoffset = c - 8
noddi.Xoffset = c - 8
gmove(&nodsi, &cx)
gmove(&cx, &noddi)
}
}
restx(&cx, &oldcx)
}
func clearfat_tail(n1 *gc.Node, b int64) {
if b >= 16 && isPlan9 {
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
q := b / 8
for ; q > 0; q-- {
n1.Type = z.Type
gins(x86.AMOVQ, &z, n1)
n1.Xoffset += 8
b -= 8
}
if b != 0 {
n1.Xoffset -= 8 - b
gins(x86.AMOVQ, &z, n1)
}
return
}
if b >= 16 {
var vec_zero gc.Node
gc.Regalloc(&vec_zero, gc.Types[gc.TFLOAT64], nil)
gins(x86.AXORPS, &vec_zero, &vec_zero)
for b >= 16 {
gins(x86.AMOVUPS, &vec_zero, n1)
n1.Xoffset += 16
b -= 16
}
// MOVUPS X0, off(base) is a few bytes shorter than MOV 0, off(base)
if b != 0 {
n1.Xoffset -= 16 - b
gins(x86.AMOVUPS, &vec_zero, n1)
}
gc.Regfree(&vec_zero)
return
}
// Write sequence of MOV 0, off(base) instead of using STOSQ.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSQ loop.
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
if b >= 8 {
n1.Type = z.Type
gins(x86.AMOVQ, &z, n1)
n1.Xoffset += 8
b -= 8
if b != 0 {
n1.Xoffset -= 8 - b
gins(x86.AMOVQ, &z, n1)
}
return
}
if b >= 4 {
gc.Nodconst(&z, gc.Types[gc.TUINT32], 0)
n1.Type = z.Type
gins(x86.AMOVL, &z, n1)
n1.Xoffset += 4
b -= 4
if b != 0 {
n1.Xoffset -= 4 - b
gins(x86.AMOVL, &z, n1)
}
return
}
if b >= 2 {
gc.Nodconst(&z, gc.Types[gc.TUINT16], 0)
n1.Type = z.Type
gins(x86.AMOVW, &z, n1)
n1.Xoffset += 2
b -= 2
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for b > 0 {
n1.Type = z.Type
gins(x86.AMOVB, &z, n1)
n1.Xoffset++
b--
}
}
