Пример #1
0
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rel := ld.Linklookup(ctxt, ".rel.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// jmpq *got+size
		ld.Adduint8(ctxt, plt, 0xff)

		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addaddrplus(ctxt, plt, got, got.Size)

		// add to got: pointer to current pos in plt
		ld.Addaddrplus(ctxt, got, plt, plt.Size)

		// pushl $x
		ld.Adduint8(ctxt, plt, 0x68)

		ld.Adduint32(ctxt, plt, uint32(rel.Size))

		// jmp .plt
		ld.Adduint8(ctxt, plt, 0xe9)

		ld.Adduint32(ctxt, plt, uint32(-(plt.Size + 4)))

		// rel
		ld.Addaddrplus(ctxt, rel, got, got.Size-4)

		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_386_JMP_SLOT))

		s.Plt = int32(plt.Size - 16)
	} else if ld.HEADTYPE == obj.Hdarwin {
		// Same laziness as in 6l.

		plt := ld.Linklookup(ctxt, ".plt", 0)

		addgotsym(ctxt, s)

		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.plt", 0), uint32(s.Dynid))

		// jmpq *got+size(IP)
		s.Plt = int32(plt.Size)

		ld.Adduint8(ctxt, plt, 0xff)
		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addaddrplus(ctxt, plt, ld.Linklookup(ctxt, ".got", 0), int64(s.Got))
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Пример #2
0
// Append 4 bytes to s and create a R_CALL relocation targeting t to fill them in.
func addcall(ctxt *ld.Link, s *ld.Symbol, t *ld.Symbol) {
	s.Attr |= ld.AttrReachable
	i := s.Size
	s.Size += 4
	ld.Symgrow(ctxt, s, s.Size)
	r := ld.Addrel(s)
	r.Sym = t
	r.Off = int32(i)
	r.Type = obj.R_CALL
	r.Siz = 4
}
Пример #3
0
Файл: asm.go Проект: achanda/go
func Addcall(ctxt *ld.Link, s *ld.Symbol, t *ld.Symbol) int64 {
	s.Attr |= ld.AttrReachable
	i := s.Size
	s.Size += 4
	ld.Symgrow(s, s.Size)
	r := ld.Addrel(s)
	r.Sym = t
	r.Off = int32(i)
	r.Type = obj.R_CALL
	r.Siz = 4
	return i + int64(r.Siz)
}
Пример #4
0
func addpltreloc(ctxt *ld.Link, plt *ld.Symbol, got *ld.Symbol, sym *ld.Symbol, typ int) *ld.Reloc {
	r := ld.Addrel(plt)
	r.Sym = got
	r.Off = int32(plt.Size)
	r.Siz = 4
	r.Type = int32(typ)
	r.Add = int64(sym.Got) - 8

	plt.Attr |= ld.AttrReachable
	plt.Size += 4
	ld.Symgrow(ctxt, plt, plt.Size)

	return r
}
Пример #5
0
// Convert the direct jump relocation r to refer to a trampoline if the target is too far
func trampoline(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol) {
	switch r.Type {
	case obj.R_CALLARM:
		// r.Add is the instruction
		// low 24-bit encodes the target address
		t := (ld.Symaddr(r.Sym) + int64(signext24(r.Add&0xffffff)*4) - (s.Value + int64(r.Off))) / 4
		if t > 0x7fffff || t < -0x800000 || (*ld.FlagDebugTramp > 1 && s.File != r.Sym.File) {
			// direct call too far, need to insert trampoline
			offset := (signext24(r.Add&0xffffff) + 2) * 4
			var tramp *ld.Symbol
			for i := 0; ; i++ {
				name := r.Sym.Name + fmt.Sprintf("%+d-tramp%d", offset, i)
				tramp = ctxt.Syms.Lookup(name, int(r.Sym.Version))
				if tramp.Value == 0 {
					// either the trampoline does not exist -- we need to create one,
					// or found one the address which is not assigned -- this will be
					// laid down immediately after the current function. use this one.
					break
				}

				t = (ld.Symaddr(tramp) - 8 - (s.Value + int64(r.Off))) / 4
				if t >= -0x800000 && t < 0x7fffff {
					// found an existing trampoline that is not too far
					// we can just use it
					break
				}
			}
			if tramp.Type == 0 {
				// trampoline does not exist, create one
				ctxt.AddTramp(tramp)
				tramp.Size = 12 // 3 instructions
				tramp.P = make([]byte, tramp.Size)
				t = ld.Symaddr(r.Sym) + int64(offset)
				o1 := uint32(0xe5900000 | 11<<12 | 15<<16) // MOVW (R15), R11 // R15 is actual pc + 8
				o2 := uint32(0xe12fff10 | 11)              // JMP  (R11)
				o3 := uint32(t)                            // WORD $target
				ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)
			}
			// modify reloc to point to tramp, which will be resolved later
			r.Sym = tramp
			r.Add = r.Add&0xff000000 | 0xfffffe // clear the offset embedded in the instruction
			r.Done = 0
		}
	default:
		ld.Errorf(s, "trampoline called with non-jump reloc: %v", r.Type)
	}
}
Пример #6
0
Файл: asm.go Проект: achanda/go
// generate a trampoline to target+offset in position independent code
func gentramppic(tramp, target *ld.Symbol, offset int64) {
	tramp.Size = 16 // 4 instructions
	tramp.P = make([]byte, tramp.Size)
	o1 := uint32(0xe5900000 | 11<<12 | 15<<16 | 4)  // MOVW 4(R15), R11 // R15 is actual pc + 8
	o2 := uint32(0xe0800000 | 11<<12 | 15<<16 | 11) // ADD R15, R11, R11
	o3 := uint32(0xe12fff10 | 11)                   // JMP  (R11)
	o4 := uint32(0)                                 // WORD $(target-pc) // filled in with relocation
	ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[12:], o4)

	r := ld.Addrel(tramp)
	r.Off = 12
	r.Type = obj.R_PCREL
	r.Siz = 4
	r.Sym = target
	r.Add = offset + 4
}
Пример #7
0
Файл: asm.go Проект: achanda/go
// generate a trampoline to target+offset
func gentramp(tramp, target *ld.Symbol, offset int64) {
	tramp.Size = 12 // 3 instructions
	tramp.P = make([]byte, tramp.Size)
	t := ld.Symaddr(target) + int64(offset)
	o1 := uint32(0xe5900000 | 11<<12 | 15<<16) // MOVW (R15), R11 // R15 is actual pc + 8
	o2 := uint32(0xe12fff10 | 11)              // JMP  (R11)
	o3 := uint32(t)                            // WORD $target
	ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)

	if ld.Linkmode == ld.LinkExternal {
		r := ld.Addrel(tramp)
		r.Off = 8
		r.Type = obj.R_ADDR
		r.Siz = 4
		r.Sym = target
		r.Add = offset
	}
}
Пример #8
0
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rel := ld.Linklookup(ctxt, ".rel.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// .got entry
		s.Got = int32(got.Size)

		// In theory, all GOT should point to the first PLT entry,
		// Linux/ARM's dynamic linker will do that for us, but FreeBSD/ARM's
		// dynamic linker won't, so we'd better do it ourselves.
		ld.Addaddrplus(ctxt, got, plt, 0)

		// .plt entry, this depends on the .got entry
		s.Plt = int32(plt.Size)

		addpltreloc(ctxt, plt, got, s, obj.R_PLT0) // add lr, pc, #0xXX00000
		addpltreloc(ctxt, plt, got, s, obj.R_PLT1) // add lr, lr, #0xYY000
		addpltreloc(ctxt, plt, got, s, obj.R_PLT2) // ldr pc, [lr, #0xZZZ]!

		// rel
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))

		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_JUMP_SLOT))
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Пример #9
0
Файл: asm.go Проект: achanda/go
// generate a trampoline to target+offset in dynlink mode (using GOT)
func gentrampdyn(tramp, target *ld.Symbol, offset int64) {
	tramp.Size = 20                                 // 5 instructions
	o1 := uint32(0xe5900000 | 11<<12 | 15<<16 | 8)  // MOVW 8(R15), R11 // R15 is actual pc + 8
	o2 := uint32(0xe0800000 | 11<<12 | 15<<16 | 11) // ADD R15, R11, R11
	o3 := uint32(0xe5900000 | 11<<12 | 11<<16)      // MOVW (R11), R11
	o4 := uint32(0xe12fff10 | 11)                   // JMP  (R11)
	o5 := uint32(0)                                 // WORD $target@GOT // filled in with relocation
	o6 := uint32(0)
	if offset != 0 {
		// insert an instruction to add offset
		tramp.Size = 24 // 6 instructions
		o6 = o5
		o5 = o4
		o4 = uint32(0xe2800000 | 11<<12 | 11<<16 | immrot(uint32(offset))) // ADD $offset, R11, R11
		o1 = uint32(0xe5900000 | 11<<12 | 15<<16 | 12)                     // MOVW 12(R15), R11
	}
	tramp.P = make([]byte, tramp.Size)
	ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[12:], o4)
	ld.SysArch.ByteOrder.PutUint32(tramp.P[16:], o5)
	if offset != 0 {
		ld.SysArch.ByteOrder.PutUint32(tramp.P[20:], o6)
	}

	r := ld.Addrel(tramp)
	r.Off = 16
	r.Type = obj.R_GOTPCREL
	r.Siz = 4
	r.Sym = target
	r.Add = 8
	if offset != 0 {
		// increase reloc offset by 4 as we inserted an ADD instruction
		r.Off = 20
		r.Add = 12
	}
}
Пример #10
0
func addgotsyminternal(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)

	ld.Addaddrplus(ctxt, got, s, 0)

	if ld.Iself {
	} else {
		ctxt.Diag("addgotsyminternal: unsupported binary format")
	}
}
Пример #11
0
func addgotsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint32(ctxt, got, 0)

	if ld.Iself {
		rel := ld.Linklookup(ctxt, ".rel", 0)
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_GLOB_DAT))
	} else {
		ctxt.Diag("addgotsym: unsupported binary format")
	}
}
Пример #12
0
Файл: asm.go Проект: Mokolea/go
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt()
		}

		// Create the glink resolver if necessary
		glink := ensureglinkresolver()

		// Write symbol resolver stub (just a branch to the
		// glink resolver stub)
		r := ld.Addrel(glink)

		r.Sym = glink
		r.Off = int32(glink.Size)
		r.Siz = 4
		r.Type = obj.R_CALLPOWER
		ld.Adduint32(ctxt, glink, 0x48000000) // b .glink

		// In the ppc64 ABI, the dynamic linker is responsible
		// for writing the entire PLT.  We just need to
		// reserve 8 bytes for each PLT entry and generate a
		// JMP_SLOT dynamic relocation for it.
		//
		// TODO(austin): ABI v1 is different
		s.Plt = int32(plt.Size)

		plt.Size += 8

		ld.Addaddrplus(ctxt, rela, plt, int64(s.Plt))
		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_PPC64_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)
	} else {
		ld.Diag("addpltsym: unsupported binary format")
	}
}
Пример #13
0
Файл: asm.go Проект: Mokolea/go
func addgotsym(s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ld.Ctxt, s)
	got := ld.Linklookup(ld.Ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint64(ld.Ctxt, got, 0)

	if ld.Iself {
		rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
		ld.Addaddrplus(ld.Ctxt, rela, got, int64(s.Got))
		ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_390_GLOB_DAT))
		ld.Adduint64(ld.Ctxt, rela, 0)
	} else {
		ld.Diag("addgotsym: unsupported binary format")
	}
}
Пример #14
0
Файл: asm.go Проект: Mokolea/go
// Construct a call stub in stub that calls symbol targ via its PLT
// entry.
func gencallstub(abicase int, stub *ld.Symbol, targ *ld.Symbol) {
	if abicase != 1 {
		// If we see R_PPC64_TOCSAVE or R_PPC64_REL24_NOTOC
		// relocations, we'll need to implement cases 2 and 3.
		log.Fatalf("gencallstub only implements case 1 calls")
	}

	plt := ld.Linklookup(ld.Ctxt, ".plt", 0)

	stub.Type = obj.STEXT

	// Save TOC pointer in TOC save slot
	ld.Adduint32(ld.Ctxt, stub, 0xf8410018) // std r2,24(r1)

	// Load the function pointer from the PLT.
	r := ld.Addrel(stub)

	r.Off = int32(stub.Size)
	r.Sym = plt
	r.Add = int64(targ.Plt)
	r.Siz = 2
	if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
		r.Off += int32(r.Siz)
	}
	r.Type = obj.R_POWER_TOC
	r.Variant = ld.RV_POWER_HA
	ld.Adduint32(ld.Ctxt, stub, 0x3d820000) // addis r12,r2,targ@plt@toc@ha
	r = ld.Addrel(stub)
	r.Off = int32(stub.Size)
	r.Sym = plt
	r.Add = int64(targ.Plt)
	r.Siz = 2
	if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
		r.Off += int32(r.Siz)
	}
	r.Type = obj.R_POWER_TOC
	r.Variant = ld.RV_POWER_LO
	ld.Adduint32(ld.Ctxt, stub, 0xe98c0000) // ld r12,targ@plt@toc@l(r12)

	// Jump to the loaded pointer
	ld.Adduint32(ld.Ctxt, stub, 0x7d8903a6) // mtctr r12
	ld.Adduint32(ld.Ctxt, stub, 0x4e800420) // bctr
}
Пример #15
0
Файл: asm.go Проект: achanda/go
func addgotsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ctxt.Syms.Lookup(".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint32(ctxt, got, 0)

	if ld.Iself {
		rel := ctxt.Syms.Lookup(".rel", 0)
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_386_GLOB_DAT))
	} else if ld.Headtype == obj.Hdarwin {
		ld.Adduint32(ctxt, ctxt.Syms.Lookup(".linkedit.got", 0), uint32(s.Dynid))
	} else {
		ld.Errorf(s, "addgotsym: unsupported binary format")
	}
}
Пример #16
0
func addgotsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint64(ctxt, got, 0)

	if ld.Iself {
		rela := ld.Linklookup(ctxt, ".rela", 0)
		ld.Addaddrplus(ctxt, rela, got, int64(s.Got))
		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_X86_64_GLOB_DAT))
		ld.Adduint64(ctxt, rela, 0)
	} else if ld.HEADTYPE == obj.Hdarwin {
		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.got", 0), uint32(s.Dynid))
	} else {
		ctxt.Diag("addgotsym: unsupported binary format")
	}
}
Пример #17
0
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_X86_64_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ctxt.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return

	case 256 + ld.R_X86_64_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return

	case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVQ of GOT entry into LEAQ of symbol itself
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_PCREL
				r.Add += 4
				return
			}
		}

		// fall back to using GOT and hope for the best (CMOV*)
		// TODO: just needs relocation, no need to put in .dynsym
		addgotsym(ctxt, targ)

		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += 4
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_X86_64_64:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	// Handle relocations found in Mach-O object files.
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
		// TODO: What is the difference between all these?
		r.Type = obj.R_ADDR

		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
		r.Type = obj.R_PCREL

		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			// turn MOVQ of GOT entry into LEAQ of symbol itself
			if r.Off < 2 || s.P[r.Off-2] != 0x8b {
				ctxt.Diag("unexpected GOT_LOAD reloc for non-dynamic symbol %s", targ.Name)
				return
			}

			s.P[r.Off-2] = 0x8d
			r.Type = obj.R_PCREL
			return
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_GOT*2 + 1:
		if targ.Type != obj.SDYNIMPORT {
			ctxt.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
		}
		addgotsym(ctxt, targ)
		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(targ.Got)
		return
	}

	// Handle references to ELF symbols from our own object files.
	if targ.Type != obj.SDYNIMPORT {
		return
	}

	switch r.Type {
	case obj.R_CALL,
		obj.R_PCREL:
		if ld.HEADTYPE == obj.Hwindows {
			// nothing to do, the relocation will be laid out in pereloc1
			return
		} else {
			// for both ELF and Mach-O
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(targ.Plt)
			return
		}

	case obj.R_ADDR:
		if s.Type == obj.STEXT && ld.Iself {
			if ld.HEADTYPE == obj.Hsolaris {
				addpltsym(ctxt, targ)
				r.Sym = ld.Linklookup(ctxt, ".plt", 0)
				r.Add += int64(targ.Plt)
				return
			}
			// The code is asking for the address of an external
			// function. We provide it with the address of the
			// correspondent GOT symbol.
			addgotsym(ctxt, targ)

			r.Sym = ld.Linklookup(ctxt, ".got", 0)
			r.Add += int64(targ.Got)
			return
		}

		if s.Type != obj.SDATA {
			break
		}
		if ld.Iself {
			ld.Adddynsym(ctxt, targ)
			rela := ld.Linklookup(ctxt, ".rela", 0)
			ld.Addaddrplus(ctxt, rela, s, int64(r.Off))
			if r.Siz == 8 {
				ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_64))
			} else {
				ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_32))
			}
			ld.Adduint64(ctxt, rela, uint64(r.Add))
			r.Type = 256 // ignore during relocsym
			return
		}

		if ld.HEADTYPE == obj.Hdarwin && s.Size == int64(ld.SysArch.PtrSize) && r.Off == 0 {
			// Mach-O relocations are a royal pain to lay out.
			// They use a compact stateful bytecode representation
			// that is too much bother to deal with.
			// Instead, interpret the C declaration
			//	void *_Cvar_stderr = &stderr;
			// as making _Cvar_stderr the name of a GOT entry
			// for stderr. This is separate from the usual GOT entry,
			// just in case the C code assigns to the variable,
			// and of course it only works for single pointers,
			// but we only need to support cgo and that's all it needs.
			ld.Adddynsym(ctxt, targ)

			got := ld.Linklookup(ctxt, ".got", 0)
			s.Type = got.Type | obj.SSUB
			s.Outer = got
			s.Sub = got.Sub
			got.Sub = s
			s.Value = got.Size
			ld.Adduint64(ctxt, got, 0)
			ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
			r.Type = 256 // ignore during relocsym
			return
		}

		if ld.HEADTYPE == obj.Hwindows {
			// nothing to do, the relocation will be laid out in pereloc1
			return
		}
	}

	ctxt.Cursym = s
	ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}
Пример #18
0
Файл: asm.go Проект: achanda/go
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) bool {
	targ := r.Sym

	switch r.Type {
	default:
		if r.Type >= 256 {
			ld.Errorf(s, "unexpected relocation type %d", r.Type)
			return false
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_X86_64_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ld.Errorf(s, "unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return true

	case 256 + ld.R_X86_64_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ctxt.Syms.Lookup(".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return true

	case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVQ of GOT entry into LEAQ of symbol itself
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_PCREL
				r.Add += 4
				return true
			}
		}

		// fall back to using GOT and hope for the best (CMOV*)
		// TODO: just needs relocation, no need to put in .dynsym
		addgotsym(ctxt, targ)

		r.Type = obj.R_PCREL
		r.Sym = ctxt.Syms.Lookup(".got", 0)
		r.Add += 4
		r.Add += int64(targ.Got)
		return true

	case 256 + ld.R_X86_64_64:
		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return true

	// Handle relocations found in Mach-O object files.
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
		// TODO: What is the difference between all these?
		r.Type = obj.R_ADDR

		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return true

	case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ctxt.Syms.Lookup(".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return true
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
		r.Type = obj.R_PCREL

		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
		}
		return true

	case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			// turn MOVQ of GOT entry into LEAQ of symbol itself
			if r.Off < 2 || s.P[r.Off-2] != 0x8b {
				ld.Errorf(s, "unexpected GOT_LOAD reloc for non-dynamic symbol %s", targ.Name)
				return false
			}

			s.P[r.Off-2] = 0x8d
			r.Type = obj.R_PCREL
			return true
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_GOT*2 + 1:
		if targ.Type != obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
		}
		addgotsym(ctxt, targ)
		r.Type = obj.R_PCREL
		r.Sym = ctxt.Syms.Lookup(".got", 0)
		r.Add += int64(targ.Got)
		return true
	}

	switch r.Type {
	case obj.R_CALL,
		obj.R_PCREL:
		if targ.Type != obj.SDYNIMPORT {
			// nothing to do, the relocation will be laid out in reloc
			return true
		}
		if ld.Headtype == obj.Hwindows || ld.Headtype == obj.Hwindowsgui {
			// nothing to do, the relocation will be laid out in pereloc1
			return true
		} else {
			// for both ELF and Mach-O
			addpltsym(ctxt, targ)
			r.Sym = ctxt.Syms.Lookup(".plt", 0)
			r.Add = int64(targ.Plt)
			return true
		}

	case obj.R_ADDR:
		if s.Type == obj.STEXT && ld.Iself {
			if ld.Headtype == obj.Hsolaris {
				addpltsym(ctxt, targ)
				r.Sym = ctxt.Syms.Lookup(".plt", 0)
				r.Add += int64(targ.Plt)
				return true
			}
			// The code is asking for the address of an external
			// function. We provide it with the address of the
			// correspondent GOT symbol.
			addgotsym(ctxt, targ)

			r.Sym = ctxt.Syms.Lookup(".got", 0)
			r.Add += int64(targ.Got)
			return true
		}

		// Process dynamic relocations for the data sections.
		if ld.Buildmode == ld.BuildmodePIE && ld.Linkmode == ld.LinkInternal {
			// When internally linking, generate dynamic relocations
			// for all typical R_ADDR relocations. The exception
			// are those R_ADDR that are created as part of generating
			// the dynamic relocations and must be resolved statically.
			//
			// There are three phases relevant to understanding this:
			//
			//	dodata()  // we are here
			//	address() // symbol address assignment
			//	reloc()   // resolution of static R_ADDR relocs
			//
			// At this point symbol addresses have not been
			// assigned yet (as the final size of the .rela section
			// will affect the addresses), and so we cannot write
			// the Elf64_Rela.r_offset now. Instead we delay it
			// until after the 'address' phase of the linker is
			// complete. We do this via Addaddrplus, which creates
			// a new R_ADDR relocation which will be resolved in
			// the 'reloc' phase.
			//
			// These synthetic static R_ADDR relocs must be skipped
			// now, or else we will be caught in an infinite loop
			// of generating synthetic relocs for our synthetic
			// relocs.
			switch s.Name {
			case ".dynsym", ".rela", ".got.plt", ".dynamic":
				return false
			}
		} else {
			// Either internally linking a static executable,
			// in which case we can resolve these relocations
			// statically in the 'reloc' phase, or externally
			// linking, in which case the relocation will be
			// prepared in the 'reloc' phase and passed to the
			// external linker in the 'asmb' phase.
			if s.Type != obj.SDATA && s.Type != obj.SRODATA {
				break
			}
		}

		if ld.Iself {
			// TODO: We generate a R_X86_64_64 relocation for every R_ADDR, even
			// though it would be more efficient (for the dynamic linker) if we
			// generated R_X86_RELATIVE instead.
			ld.Adddynsym(ctxt, targ)
			rela := ctxt.Syms.Lookup(".rela", 0)
			ld.Addaddrplus(ctxt, rela, s, int64(r.Off))
			if r.Siz == 8 {
				ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_64))
			} else {
				// TODO: never happens, remove.
				ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_X86_64_32))
			}
			ld.Adduint64(ctxt, rela, uint64(r.Add))
			r.Type = 256 // ignore during relocsym
			return true
		}

		if ld.Headtype == obj.Hdarwin && s.Size == int64(ld.SysArch.PtrSize) && r.Off == 0 {
			// Mach-O relocations are a royal pain to lay out.
			// They use a compact stateful bytecode representation
			// that is too much bother to deal with.
			// Instead, interpret the C declaration
			//	void *_Cvar_stderr = &stderr;
			// as making _Cvar_stderr the name of a GOT entry
			// for stderr. This is separate from the usual GOT entry,
			// just in case the C code assigns to the variable,
			// and of course it only works for single pointers,
			// but we only need to support cgo and that's all it needs.
			ld.Adddynsym(ctxt, targ)

			got := ctxt.Syms.Lookup(".got", 0)
			s.Type = got.Type | obj.SSUB
			s.Outer = got
			s.Sub = got.Sub
			got.Sub = s
			s.Value = got.Size
			ld.Adduint64(ctxt, got, 0)
			ld.Adduint32(ctxt, ctxt.Syms.Lookup(".linkedit.got", 0), uint32(targ.Dynid))
			r.Type = 256 // ignore during relocsym
			return true
		}

		if ld.Headtype == obj.Hwindows || ld.Headtype == obj.Hwindowsgui {
			// nothing to do, the relocation will be laid out in pereloc1
			return true
		}
	}

	return false
}
Пример #19
0
Файл: asm.go Проект: achanda/go
// resolve direct jump relocation r in s, and add trampoline if necessary
func trampoline(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol) {

	t := ld.Symaddr(r.Sym) + r.Add - (s.Value + int64(r.Off))
	switch r.Type {
	case obj.R_CALLPOWER:

		// If branch offset is too far then create a trampoline.

		if int64(int32(t<<6)>>6) != t || (*ld.FlagDebugTramp > 1 && s.File != r.Sym.File) {
			var tramp *ld.Symbol
			for i := 0; ; i++ {

				// Using r.Add as part of the name is significant in functions like duffzero where the call
				// target is at some offset within the function.  Calls to duff+8 and duff+256 must appear as
				// distinct trampolines.

				name := r.Sym.Name
				if r.Add == 0 {
					name = name + fmt.Sprintf("-tramp%d", i)
				} else {
					name = name + fmt.Sprintf("%+x-tramp%d", r.Add, i)
				}

				// Look up the trampoline in case it already exists

				tramp = ctxt.Syms.Lookup(name, int(r.Sym.Version))
				if tramp.Value == 0 {
					break
				}

				t = ld.Symaddr(tramp) + r.Add - (s.Value + int64(r.Off))

				// If the offset of the trampoline that has been found is within range, use it.
				if int64(int32(t<<6)>>6) == t {
					break
				}
			}
			if tramp.Type == 0 {
				ctxt.AddTramp(tramp)
				tramp.Size = 16 // 4 instructions
				tramp.P = make([]byte, tramp.Size)
				t = ld.Symaddr(r.Sym) + r.Add
				f := t & 0xffff0000
				o1 := uint32(0x3fe00000 | (f >> 16)) // lis r31,trampaddr hi (r31 is temp reg)
				f = t & 0xffff
				o2 := uint32(0x63ff0000 | f) // ori r31,trampaddr lo
				o3 := uint32(0x7fe903a6)     // mtctr
				o4 := uint32(0x4e800420)     // bctr
				ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[12:], o4)
			}
			r.Sym = tramp
			r.Add = 0 // This was folded into the trampoline target address
			r.Done = 0
		}
	default:
		ld.Errorf(s, "trampoline called with non-jump reloc: %v", r.Type)
	}
}
Пример #20
0
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got.plt", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}

		// jmpq *got+size(IP)
		ld.Adduint8(ctxt, plt, 0xff)

		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addpcrelplus(ctxt, plt, got, got.Size)

		// add to got: pointer to current pos in plt
		ld.Addaddrplus(ctxt, got, plt, plt.Size)

		// pushq $x
		ld.Adduint8(ctxt, plt, 0x68)

		ld.Adduint32(ctxt, plt, uint32((got.Size-24-8)/8))

		// jmpq .plt
		ld.Adduint8(ctxt, plt, 0xe9)

		ld.Adduint32(ctxt, plt, uint32(-(plt.Size + 4)))

		// rela
		ld.Addaddrplus(ctxt, rela, got, got.Size-8)

		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_X86_64_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)

		s.Plt = int32(plt.Size - 16)
	} else if ld.HEADTYPE == obj.Hdarwin {
		// To do lazy symbol lookup right, we're supposed
		// to tell the dynamic loader which library each
		// symbol comes from and format the link info
		// section just so. I'm too lazy (ha!) to do that
		// so for now we'll just use non-lazy pointers,
		// which don't need to be told which library to use.
		//
		// http://networkpx.blogspot.com/2009/09/about-lcdyldinfoonly-command.html
		// has details about what we're avoiding.

		addgotsym(ctxt, s)
		plt := ld.Linklookup(ctxt, ".plt", 0)

		ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.plt", 0), uint32(s.Dynid))

		// jmpq *got+size(IP)
		s.Plt = int32(plt.Size)

		ld.Adduint8(ctxt, plt, 0xff)
		ld.Adduint8(ctxt, plt, 0x25)
		ld.Addpcrelplus(ctxt, plt, ld.Linklookup(ctxt, ".got", 0), int64(s.Got))
	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Пример #21
0
Файл: asm.go Проект: hurkgu/go
func addpltsym(ctxt *ld.Link, s *ld.Symbol) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		got := ld.Linklookup(ctxt, ".got", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt(ctxt)
		}
		// larl    %r1,_GLOBAL_OFFSET_TABLE_+index

		ld.Adduint8(ctxt, plt, 0xc0)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Addpcrelplus(ctxt, plt, got, got.Size+6) // need variant?

		// add to got: pointer to current pos in plt
		ld.Addaddrplus(ctxt, got, plt, plt.Size+8) // weird but correct
		// lg      %r1,0(%r1)
		ld.Adduint8(ctxt, plt, 0xe3)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x04)
		// br      %r1
		ld.Adduint8(ctxt, plt, 0x07)
		ld.Adduint8(ctxt, plt, 0xf1)
		// basr    %r1,%r0
		ld.Adduint8(ctxt, plt, 0x0d)
		ld.Adduint8(ctxt, plt, 0x10)
		// lgf     %r1,12(%r1)
		ld.Adduint8(ctxt, plt, 0xe3)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x10)
		ld.Adduint8(ctxt, plt, 0x0c)
		ld.Adduint8(ctxt, plt, 0x00)
		ld.Adduint8(ctxt, plt, 0x14)
		// jg .plt
		ld.Adduint8(ctxt, plt, 0xc0)
		ld.Adduint8(ctxt, plt, 0xf4)

		ld.Adduint32(ctxt, plt, uint32(-((plt.Size - 2) >> 1))) // roll-your-own relocation
		//.plt index
		ld.Adduint32(ctxt, plt, uint32(rela.Size)) // rela size before current entry

		// rela
		ld.Addaddrplus(ctxt, rela, got, got.Size-8)

		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_390_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)

		s.Plt = int32(plt.Size - 32)

	} else {
		ctxt.Diag("addpltsym: unsupported binary format")
	}
}
Пример #22
0
func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_386_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_386_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ctxt.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return

	case 256 + ld.R_386_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return

	case 256 + ld.R_386_GOT32, 256 + ld.R_386_GOT32X:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVL of GOT entry into LEAL of symbol address, relative to GOT.
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_GOTOFF
				return
			}

			if r.Off >= 2 && s.P[r.Off-2] == 0xff && s.P[r.Off-1] == 0xb3 {
				// turn PUSHL of GOT entry into PUSHL of symbol itself.
				// use unnecessary SS prefix to keep instruction same length.
				s.P[r.Off-2] = 0x36

				s.P[r.Off-1] = 0x68
				r.Type = obj.R_ADDR
				return
			}

			ctxt.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
			return
		}

		addgotsym(ctxt, targ)
		r.Type = obj.R_CONST // write r->add during relocsym
		r.Sym = nil
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_386_GOTOFF:
		r.Type = obj.R_GOTOFF
		return

	case 256 + ld.R_386_GOTPC:
		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += 4
		return

	case 256 + ld.R_386_32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_386_32 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 0:
		r.Type = obj.R_ADDR
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_GENERIC_RELOC_VANILLA*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return
		}

		r.Type = obj.R_PCREL
		return

	case 512 + ld.MACHO_FAKE_GOTPCREL:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			// turn MOVL of GOT entry into LEAL of symbol itself
			if r.Off < 2 || s.P[r.Off-2] != 0x8b {
				ctxt.Diag("unexpected GOT reloc for non-dynamic symbol %s", targ.Name)
				return
			}

			s.P[r.Off-2] = 0x8d
			r.Type = obj.R_PCREL
			return
		}

		addgotsym(ctxt, targ)
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(targ.Got)
		r.Type = obj.R_PCREL
		return
	}

	// Handle references to ELF symbols from our own object files.
	if targ.Type != obj.SDYNIMPORT {
		return
	}

	switch r.Type {
	case obj.R_CALL,
		obj.R_PCREL:
		addpltsym(ctxt, targ)
		r.Sym = ld.Linklookup(ctxt, ".plt", 0)
		r.Add = int64(targ.Plt)
		return

	case obj.R_ADDR:
		if s.Type != obj.SDATA {
			break
		}
		if ld.Iself {
			ld.Adddynsym(ctxt, targ)
			rel := ld.Linklookup(ctxt, ".rel", 0)
			ld.Addaddrplus(ctxt, rel, s, int64(r.Off))
			ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(targ.Dynid), ld.R_386_32))
			r.Type = obj.R_CONST // write r->add during relocsym
			r.Sym = nil
			return
		}

		if ld.HEADTYPE == obj.Hdarwin && s.Size == int64(ld.SysArch.PtrSize) && r.Off == 0 {
			// Mach-O relocations are a royal pain to lay out.
			// They use a compact stateful bytecode representation
			// that is too much bother to deal with.
			// Instead, interpret the C declaration
			//	void *_Cvar_stderr = &stderr;
			// as making _Cvar_stderr the name of a GOT entry
			// for stderr. This is separate from the usual GOT entry,
			// just in case the C code assigns to the variable,
			// and of course it only works for single pointers,
			// but we only need to support cgo and that's all it needs.
			ld.Adddynsym(ctxt, targ)

			got := ld.Linklookup(ctxt, ".got", 0)
			s.Type = got.Type | obj.SSUB
			s.Outer = got
			s.Sub = got.Sub
			got.Sub = s
			s.Value = got.Size
			ld.Adduint32(ctxt, got, 0)
			ld.Adduint32(ctxt, ld.Linklookup(ctxt, ".linkedit.got", 0), uint32(targ.Dynid))
			r.Type = 256 // ignore during relocsym
			return
		}

		if ld.HEADTYPE == obj.Hwindows && s.Size == int64(ld.SysArch.PtrSize) {
			// nothing to do, the relocation will be laid out in pereloc1
			return
		}
	}

	ctxt.Cursym = s
	ctxt.Diag("unsupported relocation for dynamic symbol %s (type=%d stype=%d)", targ.Name, r.Type, targ.Type)
}